Журнал событий windows ошибка 4201

lightbulb

Error Code 4201

Error code Error Code 4201 is a common Windows issue that typically arises from “The instance name passed was not recognized as valid by a WMI data provider. [ERROR_WMI_INSTANCE_NOT_FOUND (0x1069)]”.

Overview

This article provides a comprehensive guide to resolving the issue: “The instance name passed was not recognized as valid by a WMI data provider. [ERROR_WMI_INSTANCE_NOT_FOUND (0x1069)]”. Known as Error Code 4201, this error can hinder system performance. Here’s how to address it.

Identifying the Problem

Error Code 4201 arises when a WMI (Windows Management Instrumentation) data provider fails to identify the provided instance name. It often occurs in scenarios involving remote server management or querying WMI information.

Common Fixes

1. Verify Instance Name

Check if the instance name you’re using is correct. Ensure it matches the actual instance name in the WMI repository.

2. Register WMI Namespace

Sometimes, the WMI namespace associated with the instance may not be registered. To register it:
– Open an elevated Command Prompt.
– Run the command: mofcomp <Namespace>.mof.
– Replace <Namespace> with the namespace name.

3. Restart WMI Service

Restarting the WMI service can resolve temporary issues:
– Open an elevated Command Prompt.
– Run the commands:
– net stop winmgmt
– net start winmgmt

4. Reconfigure WMI

Reconfigure WMI to reset its settings:
– Open an elevated Command Prompt.
– Run the command: winmgmt /resetrepository

Advanced Troubleshooting

1. Update WMI Providers

Outdated WMI providers can cause this error. Update them to the latest versions:
– Download the latest providers from the Microsoft website.
– Install the updates and restart the computer.

2. Scan for System Errors

Use Windows System File Checker to scan and repair system files:
– Open an elevated Command Prompt.
– Run the command: sfc /scannow

Conclusion

By following these solutions, you can effectively resolve Error Code 4201. To prevent future occurrences, ensure that WMI configurations are accurate and up-to-date. Additionally, address any potential system errors promptly to maintain system stability.

Источник

How to Fix the Event Viewer 4201 Error in Vista​

   Information

This will show you how to fix the Event viewer if you are getting this error :

ERROR_WMI_INSTANCE_NOT_FOUND
4201 The instance name passed was not recognized as valid by a WMI data provider

   Note

One usual cause of this error is a corrupted Repository file.

Here’s How:

1. Restart the computer into

Safe Mode

(without networking).​

​

​

3. In the elevated command prompt, type net stop winmgmt and press Enter.​

NOTE: This is to make certain the wmi service is not running.​

​

4. Wait until the successful message appears, then close the elevated command prompt.​

​

5. Open Windows Explorer and navigate to C:\Windows\System32\wbem.​

​

6. Right click on the Repository folder and click on Rename.​

​

7. Type in RepositoryOld and press Enter.​

NOTE: This is to make this a backup of the original Repository folder.​

​

8. Restart the computer back into normal mode to an administrator account.​

​

​

10. In the elevated command prompt, type net stop winmgmt and press Enter.​

NOTE: This is to make certain the wmi service is not running.​

​

11. Wait until successful message appears, and then type winmgmt /resetRepository in the elevated command prompt and press Enter.​

​

12. Wait until the successful message appears and then close the elevated command prompt.​

​

​

  • C:\windows\logs
  • C:\windows\system32\logfiles

14. Restart the computer.​

​

​

15. Test the Event Viewer. It should be working now.​

​

16. If it is working again, then go back and delete the RepositoryOld folder. (See step 7)​

​

17. If it is still not working for you, then do a System Restore using a restore point dated before the problem.​

​

That’s it,
Shawn

Источник

  • Windows Support Forums

  • General Support

You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.

Event viewer event 4201

  • Thread starter
    Thread starter

    Zardoc

  • Start date
    Start date




  • #1

Hey all,

Just wanted to check with you guys. Has anyone gotten an error message for event viewer windows-USB video/Analytic?

Windows could not start the Windows Event Log service on Local Computer.

Error 4201: The instance name passed was not recognized as valid by a WMI data provider.

I haven’t changed permissions in WMI to see if it fixes the issue but I wanted to check if others got this issue also.

Thanks

Event 4201 Viewer 2021-08-28_14-45-23.png

Картинка с сайта: www.elevenforum.com

Windows Build/Version
22000.168


My Computer



  • OS
    Windows 11 Pro
    Computer type
    PC/Desktop
    CPU
    Intel® Core™ i9-12900K Desktop Processor 16 (8P+8E)
    Motherboard
    Asus TUF Gaming Z790-PLUS WIFI D4
    Memory
    G.Skill Ripjaws V Series 32gb (2x16gb) DDR4 3200mhz
    Graphics Card(s)
    Asus Dual Geforce Rtx™ 3060 TI Edition 8gb Gddr6
    Monitor(s) Displays
    BenQ EW3270U 31.5” 3840×2160 UHD 16:9 HDR LED 4K LG 27UK850-W 27» 4K UHD IPS LED Monitor with HDR10
    Screen Resolution
    3840×2160
    Hard Drives
    Samsung 990 with heatsink PRO PCIe 4.0 Gen 4 NVMe® SSD 1TB
    WD_BLACK SN850X NVMe M.2 2280 1TB PCI-Express 4.0
    Crucial T500 2TB Gen4
    Samsung 970 Evo M.2 2280 2tb Pcie Gen3. X4
    PSU
    Corsair AXi Series AX860i Digital 860W 80 PLUS PSU
    Case
    Fractal Meshify C ATX Mid Tower Case
    Keyboard
    Logi MX Keys
    Mouse
    Logi M705
    Internet Speed
    400 mbs
    Browser
    Firefox
    Antivirus
    Eset NOD32
    Other Info
    Love fast boots




  • #2


My Computers



  • OS
    Windows 11
    Computer type
    PC/Desktop
    CPU
    AMD Ryzen 5 5600
    Motherboard
    MSI B550-A Pro
    Memory
    16 GB
    Graphics Card(s)
    Sapphire Radeon RX 6500XT (8 GB version)
    Monitor(s) Displays
    BenQ Mobuiz EX2710Q QHD, Iiyama ProLite X23377HDS
    Hard Drives
    MSI Spatium M461 4TB
  • Operating System
    Windows 11
    Computer type
    Laptop
    Manufacturer/Model
    Acer A114
    CPU
    Intel Celeron N4020




  • #4

Ok friends,

Here is the fix I tested.

If you want to apply this fix:
1) Save a copy of your registry
2) Copy this reg command in a text file and save as Fix for WMI Viewer USB Video Analytic.reg

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\PnpResources\Registry\HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels\Microsoft-Windows-USB-Video/Analytic]

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\PnpResources\Registry\HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels\Microsoft-Windows-USB-Video/Analytic\ChannelAccess]
"Owners"=hex(7):75,00,73,00,62,00,76,00,69,00,64,00,65,00,6f,00,2e,00,69,00,6e,\
  00,66,00,00,00,00,00

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\PnpResources\Registry\HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels\Microsoft-Windows-USB-Video/Analytic\Enabled]
"Owners"=hex(7):75,00,73,00,62,00,76,00,69,00,64,00,65,00,6f,00,2e,00,69,00,6e,\
  00,66,00,00,00,00,00

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\PnpResources\Registry\HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels\Microsoft-Windows-USB-Video/Analytic\Isolation]
"Owners"=hex(7):75,00,73,00,62,00,76,00,69,00,64,00,65,00,6f,00,2e,00,69,00,6e,\
  00,66,00,00,00,00,00

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\PnpResources\Registry\HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels\Microsoft-Windows-USB-Video/Analytic\OwningPublisher]
"Owners"=hex(7):75,00,73,00,62,00,76,00,69,00,64,00,65,00,6f,00,2e,00,69,00,6e,\
  00,66,00,00,00,00,00

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\PnpResources\Registry\HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels\Microsoft-Windows-USB-Video/Analytic\Type]
"Owners"=hex(7):75,00,73,00,62,00,76,00,69,00,64,00,65,00,6f,00,2e,00,69,00,6e,\
  00,66,00,00,00,00,00

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels\Microsoft-Windows-USB-Video/Analytic]
"OwningPublisher"="{da1d1dbd-3186-4fa2-bc2d-075efd9e43e2}"
"Enabled"=dword:00000001
"Isolation"=dword:00000001
"ChannelAccess"="O:BAG:SYD:(A;;0xf0007;;;SY)(A;;0x7;;;BA)(A;;0x3;;;BO)(A;;0x5;;;SO)(A;;0x1;;;IU)(A;;0x3;;;SU)(A;;0x1;;;S-1-5-3)(A;;0x2;;;S-1-5-33)(A;;0x1;;;S-1-5-32-573)"
"Type"=dword:00000002

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Publishers\{da1d1dbd-3186-4fa2-bc2d-075efd9e43e2}]
@="Microsoft-Windows-USB-Video"
"ResourceFileName"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,\
  00,6f,00,74,00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,\
  5c,00,64,00,72,00,69,00,76,00,65,00,72,00,73,00,5c,00,75,00,73,00,62,00,76,\
  00,69,00,64,00,65,00,6f,00,2e,00,73,00,79,00,73,00,00,00
"MessageFileName"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,\
  6f,00,74,00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,\
  00,64,00,72,00,69,00,76,00,65,00,72,00,73,00,5c,00,75,00,73,00,62,00,76,00,\
  69,00,64,00,65,00,6f,00,2e,00,73,00,79,00,73,00,00,00

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Publishers\{da1d1dbd-3186-4fa2-bc2d-075efd9e43e2}\ChannelReferences]
"Count"=dword:00000001

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Publishers\{da1d1dbd-3186-4fa2-bc2d-075efd9e43e2}\ChannelReferences\0]
@="Microsoft-Windows-USB-Video/Analytic"
"Id"=dword:00000010
"Flags"=dword:00000000

Reboot and try the viewer again, should work (well until next update and MS will mess it up again


My Computer



  • OS
    Windows 11 Pro
    Computer type
    PC/Desktop
    CPU
    Intel® Core™ i9-12900K Desktop Processor 16 (8P+8E)
    Motherboard
    Asus TUF Gaming Z790-PLUS WIFI D4
    Memory
    G.Skill Ripjaws V Series 32gb (2x16gb) DDR4 3200mhz
    Graphics Card(s)
    Asus Dual Geforce Rtx™ 3060 TI Edition 8gb Gddr6
    Monitor(s) Displays
    BenQ EW3270U 31.5” 3840×2160 UHD 16:9 HDR LED 4K LG 27UK850-W 27» 4K UHD IPS LED Monitor with HDR10
    Screen Resolution
    3840×2160
    Hard Drives
    Samsung 990 with heatsink PRO PCIe 4.0 Gen 4 NVMe® SSD 1TB
    WD_BLACK SN850X NVMe M.2 2280 1TB PCI-Express 4.0
    Crucial T500 2TB Gen4
    Samsung 970 Evo M.2 2280 2tb Pcie Gen3. X4
    PSU
    Corsair AXi Series AX860i Digital 860W 80 PLUS PSU
    Case
    Fractal Meshify C ATX Mid Tower Case
    Keyboard
    Logi MX Keys
    Mouse
    Logi M705
    Internet Speed
    400 mbs
    Browser
    Firefox
    Antivirus
    Eset NOD32
    Other Info
    Love fast boots

Local time
4:16 AM
Posts
1
OS
Windows 11




  • #5

Hi,
thank you so much for helping me solve the problem.
The solution you proposed worked wonders.
I would just add that for the registry key «HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\ PnpResources\ Registry\HKLM \SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels\Microsoft-Windows-USB-Video/Analytic» you must change the permissions, otherwise the change will not you are allowed.
Thanks again.


My Computer



  • OS
    Windows 11




  • #6


My Computer



  • OS
    Windows 11 Pro
    Computer type
    PC/Desktop
    CPU
    Intel® Core™ i9-12900K Desktop Processor 16 (8P+8E)
    Motherboard
    Asus TUF Gaming Z790-PLUS WIFI D4
    Memory
    G.Skill Ripjaws V Series 32gb (2x16gb) DDR4 3200mhz
    Graphics Card(s)
    Asus Dual Geforce Rtx™ 3060 TI Edition 8gb Gddr6
    Monitor(s) Displays
    BenQ EW3270U 31.5” 3840×2160 UHD 16:9 HDR LED 4K LG 27UK850-W 27» 4K UHD IPS LED Monitor with HDR10
    Screen Resolution
    3840×2160
    Hard Drives
    Samsung 990 with heatsink PRO PCIe 4.0 Gen 4 NVMe® SSD 1TB
    WD_BLACK SN850X NVMe M.2 2280 1TB PCI-Express 4.0
    Crucial T500 2TB Gen4
    Samsung 970 Evo M.2 2280 2tb Pcie Gen3. X4
    PSU
    Corsair AXi Series AX860i Digital 860W 80 PLUS PSU
    Case
    Fractal Meshify C ATX Mid Tower Case
    Keyboard
    Logi MX Keys
    Mouse
    Logi M705
    Internet Speed
    400 mbs
    Browser
    Firefox
    Antivirus
    Eset NOD32
    Other Info
    Love fast boots

Local time
4:16 AM
Posts
28
OS
win11




  • #7

Does not work. Cannot add that registry to the key.


My Computer



  • OS
    win11

Try3

Well-known member

Local time
3:16 AM
Posts
3,342
Location

CurrentCounty

OS
Windows 11 Home x64 Version 23H2 Build 22631.3447




  • #8

Does not work. Cannot add that registry to the key.

To which user did you change Ownership of the parent Registry Key?
To which user / user group did you give change Permission for the parent Registry Key?Denis


My Computer



  • OS
    Windows 11 Home x64 Version 23H2 Build 22631.3447

Local time
4:16 AM
Posts
28
OS
win11




  • #9

first i tried to set it all to administrator. Then I used the run as software to run as trusted installer. The keys installed…but they did nothing. The WMI error in the log persists, and unable to delete the logs.


My Computer



  • OS
    win11

Try3

Well-known member

Local time
3:16 AM
Posts
3,342
Location

CurrentCounty

OS
Windows 11 Home x64 Version 23H2 Build 22631.3447




  • #10

If you set it to Administrator then you set it to the normally-disabled Built-in Admin account.
A more common & effective step would be to set it to Administrators [plural] because that is a User group to which all your Admin accounts belong.

If you change the ownership & permissions then you do not need to use that utility to run as TrustedInstaller.

I cannot advise you about your WMI error, I know nothing about that topic.
I only posted to help you with the Ownership & Permissions changes.

best of luck,
Denis


My Computer



  • OS
    Windows 11 Home x64 Version 23H2 Build 22631.3447




  • #11

Does not work. Cannot add that registry to the key.

Don’t bother adding the key. It gets overridden eventually. Besides, that error only appears if the journal is empty and not every time. I don’t bother because it has no impact on the O/S


My Computer



  • OS
    Windows 11 Pro
    Computer type
    PC/Desktop
    CPU
    Intel® Core™ i9-12900K Desktop Processor 16 (8P+8E)
    Motherboard
    Asus TUF Gaming Z790-PLUS WIFI D4
    Memory
    G.Skill Ripjaws V Series 32gb (2x16gb) DDR4 3200mhz
    Graphics Card(s)
    Asus Dual Geforce Rtx™ 3060 TI Edition 8gb Gddr6
    Monitor(s) Displays
    BenQ EW3270U 31.5” 3840×2160 UHD 16:9 HDR LED 4K LG 27UK850-W 27» 4K UHD IPS LED Monitor with HDR10
    Screen Resolution
    3840×2160
    Hard Drives
    Samsung 990 with heatsink PRO PCIe 4.0 Gen 4 NVMe® SSD 1TB
    WD_BLACK SN850X NVMe M.2 2280 1TB PCI-Express 4.0
    Crucial T500 2TB Gen4
    Samsung 970 Evo M.2 2280 2tb Pcie Gen3. X4
    PSU
    Corsair AXi Series AX860i Digital 860W 80 PLUS PSU
    Case
    Fractal Meshify C ATX Mid Tower Case
    Keyboard
    Logi MX Keys
    Mouse
    Logi M705
    Internet Speed
    400 mbs
    Browser
    Firefox
    Antivirus
    Eset NOD32
    Other Info
    Love fast boots

Local time
4:16 AM
Posts
28
OS
win11




  • #12

That’s fine but in the event viewer it pops up with this dialog when viewing the administrative summary custom log at the top. I suppose ignoring it is the only way but it didn’t pop up a few days ago so something happened which can’t be fixed.


My Computer



  • OS
    win11

Similar threads

  • Windows Support Forums

  • General Support

Источник

by


·

Published
· Updated

Error 4201 is an error on windows related to WMI data provider, which is a component of Windows. However people have reported a number of problems which are directly linked to the WMI provider. People have said that they have experienced the following error message:

Error 4201: The instance name passed was not recognized as valid by a WMI data provider.

What Causes The Error 4201

Normally these kinds of errors are caused because of the program that it relates to and so below are the main causes of the following error:

  • Specific Windows files and settings are damaged or corrupt
  • Registry keys cannot be found
  • Files have been removed

How To Fix The 4201 Error

Step 1 – Rename The WMI Folder

The “WMI” folder is basically what Windows uses to help load up a number of important pieces of software & data for your system. If you are experiencing the 4201 error, it generally means that the references to this folder are damaged and should be changed. Here’s how to do this:

  • Use msconfig to switch to safe mode boot
  • Boot to safe mode
  • Run cmd.exe as an administrator
  • Type “cd C:\Windows\System32\LogFiles\WMI”
  • Type “rename RtBackup RtBackup2”
  • Use msconfig to switch to normal boot mode
  • Reboot and find event viewer working

Step 2 – Clean Out The Registry

  • Download This Registry Cleaner

One of the big causes of the 4201 errors is through the “registry” database of your computer. This is a large database which stores vital information & settings for your PC, and is used continually to help Windows to read the files, settings & options that it needs to run. Although the registry is one of the most important parts of every Windows system, it’s continually causing a large number of problems thanks to the way it will often become corrupted and unreadable. This is the cause behind many 4201 errors, and needs to be resolved by using a reliable “registry cleaner” application.

This step is best completed by downloading RegAce System Suite, and letting it clean out any of the problems that your system may have inside.

Источник

Понравилась статья? Поделить с друзьями:
0 0 голоса
Рейтинг статьи
Подписаться
Уведомить о
guest

0 комментариев
Старые
Новые Популярные
Межтекстовые Отзывы
Посмотреть все комментарии
  • Генератор ssl сертификатов windows
  • Windows 10 увеличить шрифт в меню пуск windows
  • Free antivirus for windows server
  • Как устанавливать windows 10 по сети
  • Не форматируется dvd rw диск в windows 10