Windows sandbox гипервизор не найден

Let us take a closer look at the error Windows Sandbox No Hypervisor Found error. With the support of our server management support services, we will give you a complete overview of the error.

Error: Windows Sandbox No Hypervisor Found error

Windows Sandbox is a useful tool for testing untrusted programs and data in a safe virtual environment.

The installation of Windows Sandbox is rather simple. When we try to open the program, however, we will receive the “No Hypervisor was discovered code 0XC0351000” issue.

According to the problem notice, Windows Sandbox was unable to recognize Hypervisor. This can occur for a variety of reasons, including improperly set up virtual machine-related capabilities under Windows Features.

To troubleshoot this problem on the Windows PC, follow the methods in the article below.

1. Check and Enable Virtualization Technology in BIOS

To function, all virtualization-based tools require hardware virtualization to in the BIOS.

Check Task Manager to see if the hardware virtualization is set up if not done. If not, we may enable it in BIOS to support virtualization tools manually. This is the first step in Windows Sandbox No Hypervisor Found error management.

To verify the state of virtualization, do the following:

• Open Task Manager by right-clicking on the Start button.
• Open the Performance tab in Task Manager.
• Next, ensure that the CPU tab is chosen.
• Navigate to the Virtualization section. Skip to the next method if Enabled.
  Follow the instructions below to activate hardware virtualization on the machine if it is not active.

We’ll now go through how to activate Hardware Virtualization in BISO on an HP machine. The steps for enabling hardware virtualization may differ depending on the manufacturer of the machine.

1. 1. Turn off the computer.
   2. To access the Start menu, hit the Power button and then begin pressing the Esc key.
   3. To enter BIOS Setup, press F10.
   4. Use the right-left arrow keys to navigate to and open the Configuration tab in the BIOS Setup Utility.
   5. Then, using the down and up arrow keys, pick Virtualization Technology or something similar.

With the option underlined, hit Enter and choose Enabled from the menu.

• state of the Virtualization Technology will now be active.
• F10 once more to save the changes and exit BIOS.

Allow the computer to reboot. To view the Virtualization status under the CPU tab, use Task Manager. Whether it shows “Enabled,” try opening Windows Sandbox and seeing if it works without the error.

2. Enable Virtual Machine Platform Features

Windows Sandbox is an optional feature that we may enable via the Windows Features dialog. Similarly, we may need to activate a few extra optional capabilities in order to correctly execute the virtualization program.

Virtual Machine Platform and Windows Hypervisor Platform are the two optional features we must activate. These utilities provide virtual machine platform support and offer the API required to run virtualization software on Windows.

To activate virtualization features, do the following:

1. To open Settings, press Win + I.
2. To launch Control Panel, type appwiz.cpl and press OK.
3. Turn Windows features on or off in the left pane.
4. Scroll down in the Windows Features dialog to find Virtual Machine Platform and Windows Hypervisor Platform.
5. Click OK after selecting both choices.
6. Windows will begin to install the required files. So, just wait for the procedure to finish. After that, click Restart Now to restart the system and implement the changes.

3. Set Hypervisor to Run at System Startup

If the Hypervisor fails to launch on system startup, Windows Sandbox may not function properly. To resolve this issue, we can alter the Boot Configuration Data (BCD) file to automatically activate Hypervisor upon system startup.

To configure Hypervisor to launch upon system boot:

1. Enter cmd into the Win key. Right-click Command Prompt and choose Run as admin.
2. Enter the following command into the Command Prompt window:

   BCDEDIT /Set {current} hypervisorlaunchtype auto

3. Wait for the success notification before restarting the computer.
4. After restarting the computer, launch Command Prompt as administrator and type the following command:

   bcdedit

5. Scroll down to the Hypervisorlaunchtype entry and make sure the mode is Auto.
6. Launch Windows Sandbox to see whether the No Hypervisor Found problem has been addressed.

Please note consider that we chose the Hypervisor to launch at boot. Virtual machines running on third-party virtualization solutions such as VMWare may not function properly.

In the elevated Command Prompt, run the following command to disable Hypervisor upon startup:

bcdedit /set hypervisorlaunchtype off

After that, restart the computer to have the modifications take effect.

Get Set With the Sandbox Again

Sandbox is an amazing lightweight virtualization option for testing dangerous files and programs on the PC. It is only accessible on the Pro, Enterprise, and Education editions of Windows 10 and 11.

If this virtualization option is not accessible, consider Sandboxie-Plus, a Windows Sandbox alternative. It is free to use and compatible with all versions of Windows.

[Need assistance with similar queries? We are here to help]

Conclusion

To sum up we have now gone through how to manage the Windows Sandbox No Hypervisor Found error. With the support of our server management support services, we have now learned to remove the error.

However, when trying to launch the application, you may get the error «No Hypervisor was found code 0XC0351000».

The error message says Windows Sandbox cannot detect the Hypervisor. This can happen for a variety of reasons, including incorrectly configured virtual machine-related features in Windows Features.

Follow the steps in the article below to fix this error on your Windows PC.

1. Check and enable Virtualization Technology in BIOS

Картинка с сайта: tipsmake.com

All virtualization-based tools need hardware virtualization support in the BIOS to work. If you have not configured your hardware virtualization, check that it is enabled in Task Manager. If not, you can manually enable it in the BIOS to support virtualization tools.

To check the virtualization status:

1. Right-click Start and open Task Manager.

2. In the Task Manager , open the Performance tab.

3. Next, make sure that the CPU tab is selected.

4. Locate the Virtualization section. If the feature is already enabled, move on to the next method.

5. If disabled, follow the steps below to enable hardware virtualization on your computer.

Now, the article will introduce how to enable Hardware Virtualization in BISO on HP computers. Instructions for enabling hardware virtualization may vary depending on the computer manufacturer. You can find specific instructions on your computer manufacturer’s website or see how to enter the BIOS in Windows 10/11.

1. Turn off the PC.

2. Press the Power button then start pressing the Esc key to see the Start menu.

3. Press F10 to enter BIOS Setup.

Картинка с сайта: tipsmake.com

4. In the BIOS Setup Utility , use the right-left arrow keys to locate and open the Configuration tab.

5. Next, use the down arrow keys to select Virtualization Technology or anything with a similar term.

Картинка с сайта: tipsmake.com

6. With the option highlighted, press Enter and select Enabled from the options. Now, the Virtualization Technology status will show as Enabled.

7. Press F10 again to save the changes and exit the BIOS.

Wait for your computer to restart. Open the Task Manager to see the Virtualization status in the CPU tab. If it says «Enabled» , try opening Windows Sandbox to see if it works without errors.

2. Enable Virtual Machine Platform Features

Windows Sandbox is available as an optional feature that you can install from the Windows Features dialog, and TipsMake showed how to do this in a guide on how to enable and set up Windows Sandbox in Windows 11 Similarly, you may need to enable some additional optional features required to run the virtualization tool successfully.

The two optional features you need to enable are Virtual Machine Platform and Windows Hypervisor Platform . These tools enable platform support for virtual machines and provide the APIs needed to run virtualization software on Windows.

To enable virtualization features:

1. Press Win + I to open Settings.

2. Enter appwiz.cpl and click OK to open Control Panel.

Картинка с сайта: tipsmake.com

3. In the left pane, click Turn Windows features on or off .

Картинка с сайта: tipsmake.com

4. In the Windows Features dialog , scroll down and find Virtual Machine Platform and Windows Hypervisor Platform .

5. Select both options and press OK.

6. Windows will start installing the necessary files. So wait for the process to complete. Once done, click Restart Now to reboot your system and apply the changes.

3. Set Hypervisor to run at system startup

Windows Sandbox may not work if the Hypervisor is not running during system startup. To work around this problem, you can modify the Boot Configuration Data (BCD) file to automatically run the Hypervisor at system startup.

To set the Hypervisor to launch at system startup:

1. Press the Win key and type cmd. Then right click on Command Prompt and select Run as administrator .

2. In the Command Prompt window, type the following command and press Enter :

BCDEDIT /Set {current} hypervisorlaunchtype auto

3. Wait for the success message and restart the PC.

4. After rebooting, open Command Prompt with admin rights and run the following command:

bcdedit

5. Next, scroll down to Hypervisorlaunchtype and make sure it is set to Auto.

6. Try to launch Windows Sandbox and check if the No Hypervisor was found error is fixed.

Note that with the Hypervisor set to launch at startup, virtual machines running on third-party virtualization tools such as VMWare may not function correctly.

To disable Hypervisor at startup, enter the following command into Command Prompt with admin rights:

bcdedit /set hypervisorlaunchtype off

Once done, restart your computer to apply the changes.

With Windows 10 Microsoft introduced the Windows Sandbox feature for Professional and Enterprise users, that designed to run untrusted applications inside a lightweight isolated environment running independently from your main installation. That means every time you launch the feature, it runs a new clean installation of Windows 10. Any software installed in Windows Sandbox stays only in the sandbox and cannot affect your host and Once Windows Sandbox is closed, all the software with all its files and state are permanently deleted. By default, the Windows sandbox feature not enabled and you need to manually enable Windows sandbox from Windows features.

Overall it’s a great addition to test unknown applications, check out websites that seem suspicious, unfamiliar browser extensions and add-ons, and other items you might not want to run in your regular Windows environment. But few users report while trying to launch the Sandbox feature they meet error no hypervisor was found. please enable hypervisor support. (0xc0351000). 

As the error message shows virtualization technology required for launching and using the Sandbox feature is either not supported by the system or is disabled in the BiOS. If you are also struggling with similar problem “No hypervisor was found. Please enable hypervisor support” While opening Windows Sandbox apply the solutions below.

Check CPU virtualization enabled

• Open the task manager,
• move to the performance tab then select CPU on left,
• Now check the virtualization shows enabled (refer to the image below)

If Virtualization is disabled, you need to head over to the BIOS or UEFI of your system to activate the feature.

Before this open command prompt, type systeminfo and hit enter key this will display whether your system supports virtual technology or not.

Restart your system and boot into the BIOS mode using the del key (Note:  Refer to the documentation for your computer’s motherboard model for the exact instructions to access BIOS)

• Most of the manufacturers support del, F10 or F2 key to access BIOS setup,
• Once you enter BIOS head over to system configuration using the arrow key on the keyboard,
• Here select the virtualization Technology and enable the option

• Save these settings by hitting F10 on the keyboard.
• Exit the BIOS mode and boot into the Windows 10 OS and Check if the issue is resolved.

Enable Hyper-V ‘Turn Windows features on or off

If processor virtualization is enabled, then it would be strange to encounter the “No hypervisor found” error message. In such cases, you need to make sure the Hyper-V is enabled on Turn Windows features are on or off. If it is already enabled we recommend disabling the feature and re-enabling the same again.

On the start menu search type Windows Features and select Turn Windows feature on or off from the search results, Now scroll down and look the following features are enabled.

• Windows Sandbox
• Virtual machine platform
• Windows hypervisor platform

If not checkmark on them and click ok to enable these features. Restart your PC and check if this helps to fix no hypervisor was found. please enable hypervisor support. (0xc0351000) on Windows 10.

Add a BCD entry

Here is another solution users suggest on the Microsoft forum, adding an entry to the Boot Configuration Data (BCD) helps to fix the issue.

• Open the command prompt as administrator,
• Type command BCDEDIT /Set {current} hypervisorlaunchtype auto and hit the enter key.
• you will get a message The operation was completed successfully
• Close the command prompt and restart your PC,
• Again open the command prompt and run command bcdedit and press Enter.
• Here look at the hypervisorlaunchtype status showing Auto, That means the hypervisor is successfully configured to run at startup and You are now ready to go Launch Windows Sandbox

Also read:

• Solved: Headphones not recognized (Not working) on Windows 10
• How to Clear the Pagefile at shutdown on Windows 10, 8.1 and 7
• How to Reset, and Reinstall Microsoft Edge Browser in Windows 10
• How to Repair or rebuild Master Boot Record (MBR) on Windows 10/8.1
• How to Reset Windows 10 password without any Software