Issue: I’ve been getting “App Container profile failed with error 0x800700B7” error during every boot, after upgrading to 1703 build. Is someone encountering the same problem?
Solved Answer
“App Container profile failed with error 0x800700B7 because it was unable to register the AppContainer SID.” That’s an error message that many Windows 10 users received at Windows boot in Event Viewer.[1] We have found some threads related to 0x800700B7 error that has been created before Windows 10 Creators Update (V1703) release. Nevertheless, most of the computers affected by this bug were recently upgraded to Creators Update.[2]
Luckily, the “App Container profile failed with error 0x800700B7” error does not have negative effect on system’s performance. However, “littered” Event Viewer can annoy some users and they might want to clean it. Besides, the error may also be accompanied by “The request is not supported” error when trying to start the CldFlt service.[3]
Microsoft community is fussing about “App Container profile failed with error 0x800700B7” error and casting anxiety due to Microsoft’s unresponsiveness. It seems that this time the company’s support team is not even going deep about the “App Container profile failed with error 0x800700B7” error because the recently created thread has been moved to the Windows Update discussion topic, which is not relevant.
Nevertheless, Microsoft is working hard on every issue, so it can be expected that the upcoming patch will fix the 0x800700B7 error. If, nevertheless, you are not willing to wait for the official fixes, you can try these methods:
Perform a Clean Boot
Clean Boot requires minimal set of drivers and startup programs to run Windows OS. By performing it, you will be able to isolate the software conflicts that may occur on the system and trigger the issues like “App Container profile failed with error 0x800700B7” bug.
- Press Windows key + R, type msconfig, and press Enter.
- Open Services tab and check the Hide all Microsoft services box.
- Click Disable all.
- Now open Startup tab again and select Open Task Manager.
- Disable all startup items and close Task Manager.
- Click OK and restart the system.
If the error disappeared, then you should enable startup items and processes one-by-one to see which application causes problems.
Run Registry Editor
Fix it now!
To repair damaged system, you will have a 24hr Free Trial and the ability to purchase the licensed version of the Fortect.
- Press Windows key + R, type regedit, and press Enter.
- Use the left pane to navigate to the Computer\\HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Services\\CldFlt directory.
- Find the Start registry DWORD (REG_DWORD) on the right side of the CldFlt key.
- Double-click on it and set the value from 2 to 3.
- Click OK and close Registry Editor.
- Finally, reboot the system. You may need to reboot it twice to clean the Even Viewer completely.
Repair your Errors automatically
ugetfix.com team is trying to do its best to help users find the best solutions for eliminating their errors. If you don’t want to struggle with manual repair techniques, please use the automatic software. All recommended products have been tested and approved by our professionals. Tools that you can use to fix your error are listed bellow:
do it now!
Download Fix
Happiness
Guarantee
Compatible with Microsoft Windows
Still having problems?
If you failed to fix your error using Fortect, reach our support team for help. Please, let us know all details that you think we should know about your problem.
Fortect will diagnose your damaged PC. It will scan all System Files that have been damaged by security threats. To repair damaged system, you will have a 24hr Free Trial and the ability to purchase the licensed version of the Fortect malware removal tool.
Access geo-restricted video content with a VPN
Private Internet Access is a VPN that can prevent your Internet Service Provider, the government, and third-parties from tracking your online and allow you to stay completely anonymous. The software provides dedicated servers for torrenting and streaming, ensuring optimal performance and not slowing you down. You can also bypass geo-restrictions and view such services as Netflix, BBC, Disney+, and other popular streaming services without limitations, regardless of where you are.
Don’t pay ransomware authors – use alternative data recovery options
Malware attacks, particularly ransomware, are by far the biggest danger to your pictures, videos, work, or school files. Since cybercriminals use a robust encryption algorithm to lock data, it can no longer be used until a ransom in bitcoin is paid. Instead of paying hackers, you should first try to use alternative recovery methods that could help you to retrieve at least some portion of the lost data. Otherwise, you could also lose your money, along with the files. One of the best tools that could restore at least some of the encrypted files – Data Recovery Pro.
App Container Profile Failed Error 0x800700b7 is an Event Viewer mess up that comes into existence in the Windows 10 system equipped with Creators Update. This message does not leave any negative effect on user experience or system’s performance. But if you prefer to declutter Event Viewer, you may like to get rid of this issue.
On every startup of Windows 10, users notice the following error message in the Event Viewer – “App Container profile failed with error 0x800700B7 because it was unable to register the AppContainer SID”. Though the Windows Stop code is not harmful, however, in some cases, it coordinately relates to CldFlt startup issue. So, the workaround is to perform a Registry hack that helps you to bypass this issue in Windows 10. Also, executing a clean boot helps you to find out the culprit program that leads to the pop-up of this specific message in Event Viewer.
How to Fix App Container Profile Failed Error 0x800700b7 in Windows 10
Solution 1 – Registry Editor
Step 1 – First and foremost, open Registry Editor to solve App Container Profile Failed Error 0x800700b7. To do so, type regedit on Cortana and choose the same command on the top.
Step 2 – This leads to the UAC prompt on the screen, so click Yes to proceed.
Step 3 – In the left sidebar of the Registry, navigate to the below-mentioned key.
HKEY_LOCAL_MACHINE => SYSTEM => CurrentControlSet => Services => CldFlt
Step 4 – Shift to the corresponding right pane of CldFlt key and locate a DWORD namely Start. To modify its Value data, execute a double-click on this specific Start DWORD.
Step 5 – Now, assign its new Value as 3 and click OK to save the modifications. Lastly, restart Windows 10 PC and you then you notice that there is no such error as App Container Profile Failed Error 0x800700b7 in the Event Viewer.
Solution 2 – Do a Clean Boot
Step 1 – Type msconfig on taskbar text box and choose System Configuration that appears underneath Best match.
Step 2 – Stay on the General tab in the window that opens up. Click Selective startup, the last dot as shown in the given picture.
Step 3 – Moving on, deselect the option Load startup items.
Step 4 – Now, switch to the Services tab on the top. Here, you can see various checkboxes, however, tick mark the last one namely “Hide all Microsoft services“. After doing so, click the button Disable all as you can see in the below image.
Step 5 – Now, shift to the Startup tab and click the only visible option “Open Task Manager“.
Step 6 – Once it opens up, deselect all the Startup items one after the other. Lastly, exit from Task Manager and click OK on the System Configuration box.
Step 7 – Reboot the PC and see if the error got disappeared from Event Viewer. If so, then enable startup items one by one and try to find out which one is causing the error.
Conclusion
Microsoft did not come forward with any solution but these workarounds are helping out users to get rid of App Container Profile Failed Error 0x800700b7 error in Windows 10. If you have a few more ways to deal this specific issue of Event Viewer, write them to us in the comments form.
Иногда может произойти что современные приложения Windows 10 не работают так как хотелось бы. Один из вариантов Перерегистрировать это приложение. И даже перерегистрируя его вы можете потерпеть неудачу из — за различных причин. Когда процесс завершается неудачно, вы получаете детальное сообщения об ошибке, красным цветом.
Add-AppxPackage : Сбой развертывания с HRESULT: 0x80073CF6, Не удалось зарегист
рировать пакет.
Merge Failure: ошибка: 0x80070003: не удается зарегистрировать пакет Microsoft.
WindowsStore_2015.23.23.0_x64__8wekyb3d8bbwe( имя пакета * ) так как произошел сбой объединени
я следующего файла: C:\Program Files\WindowsApps\Microsoft.WindowsStore_2016.23 (* Имя исполняемого файла )
.23.0_neutral_split.language-ru_8wekyb3d8bbwe\resources.pri
* Имя пакета и Имя исполняемого файла может изменятся в зависимости от приложения. Например, имя пакета может быть как Microsoft.WindowsStore_2016.8.3.0_x86__8wekyb3d8bbwe , ИМЯ исполняемого файла может быть C: \ Program……
Если вы получаете эту ошибку, необходимо проверить запись журнала для этого процесса, с помощью просмотра событий, который расскажет вам о причинах ошибки. В целом, следует отметить , что эта ошибка проявляется, если владелец ключа реестра в пакете приложения по какой то причине изменен. Если вернуть владелеца ключа реестра по умолчанию Система, то мы можем легко избежать проблему.
Как исправить — Сбой развертывания с HRESULT: 0x80073CF6, Не удалось зарегистрировать пакет. Merge Failure: ошибка: 0x80070003: не удается зарегистрировать пакет Microsoft.
1. Нажмите Win + R и введите Regedit в диалоговом окне Выполнить, чтобы открыть редактор реестра. Нажмите кнопку ОК.
2. Перейдите в следующий раздел реестра:
HKEY_CURRENT_USER \ Software \ Classes \ Local Settings \ Software \ Microsoft \ Windows \ CurrentVersion \ AppModel \ Repository \ Packages \
* Имя Пакета*
* Имя пакета , который вы получили с ошибкой, например — Microsoft.WindowsStore_2016.29.13.0_x86__8wekyb3d8bbwe.
.jpg)
3. Теперь с помощью правой кнопкой мыши кликнув на ключе реестра с именем пакета выберите в контекстном меню Разрешения… . Нажмите кнопку Дополнительно в окне свойств (см скриншот ниже).
4. Далее, в Дополнительных параметрах безопасности, необходимо проверить владельца ключа. Так как вы столкнулись с ошибкой, владелец может быть любой другой, кроме Системы. Таким образом , необходимо установить Система по умолчанию в качестве владельца. Нажмите на ссылку Изменить.
5. Затем нажмите кнопку Дополнительно и перейдите в окно Выбор Пользователь или Группа.
6. Двигаясь дальше, в показанном ниже окне нажмите кнопку Поиск. Затем прокрутите вниз результаты поиска и выберите СИСТЕМА . Нажмите кнопку ОК .
Теперь вы должны увидеть Система в окне Выбор Пользователь или Группа. Нажмите кнопку ОК .
7. И, наконец, вы установили Система в качестве владельца ключа реестра. Проверьте чекбоксы, опции — Заменить владельца на подконтейнеров и объектов и Заменить все записи разрешений дочернего объекта наследуемыми от этого объекта, должны быть включены.
Нажмите Применить затем ОК . Нажмите кнопку OK в окне свойств , а также. Закройте редактор реестра .
Теперь перезагрузите компьютер и попробуйте повторно зарегистрировать приложение.
Это работает!
For no apparent reason all of the Bing based apps ( Maps, Weather, Sport, News etc.) that were working just fine yesterday now work for about 10 seconds and then crash. I went in the event viewer and I found this:
Log Name: Microsoft-Windows-AppModel-Runtime/Admin
Source: Microsoft-Windows-AppModel-Runtime
Date: 06/11/2012 02.10.49
Event ID: 22
Task Category: None
Level: Error
Keywords: AppContainer
User: ARTINS90\Artins
Computer: Artins90
Description:
DeleteAppContainerProfile failed for AppContainer Microsoft.BingWeather_8wekyb3d8bbwe with error 0x80070091.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-AppModel-Runtime" Guid="{F1EF270A-0D32-4352-BA52-DBAB41E1D859}" />
<EventID>22</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x2000000000000002</Keywords>
<TimeCreated SystemTime="2012-11-06T01:10:49.897767300Z" />
<EventRecordID>295</EventRecordID>
<Correlation ActivityID="{D997A6B0-BBB9-0002-50A9-97D9B9BBCD01}" />
<Execution ProcessID="3676" ThreadID="3096" />
<Channel>Microsoft-Windows-AppModel-Runtime/Admin</Channel>
<Computer>Artins90</Computer>
<Security UserID="S-1-5-21-1957507509-593973461-3772905561-1001" />
</System>
<EventData>
<Data Name="ErrorCode">2147942545</Data>
<Data Name="Context">Microsoft.BingWeather_8wekyb3d8bbwe</Data>
</EventData>
</Event>
[/CODE]
It looks like the apps try to delete my profile but fail and then crash with a 0x80070091 error the other apps are working just fine, I tried to reinstalling them, switching to a local accout, running a SFC /scannow and I ran a chkdsk but nothing helped, I guess I need to fiddle with the folder where the application is and delete the profile by myself but Microsoft decided to hide it so I have no clue about what to do please reply if you know how to fix this issue thanks in advance