It is very disappointing to find that msvcr110.dll is missing because when this happens, you cannot run some certain programs. But luckily, it is not hard to fix, and this post from MiniTool Solution has collected multiple methods to deal with this issue.
About Msvcr110.dll and Msvcr110.dll Is Missing
What is msvcr110.dll? It is a Windows Dynamic Link Library file, which is needed by some certain programs. The msvcr110.dll file is usually located in the C:\Windows\System32 folder and it is a necessary file for the Visual C++ on your computer.
Sometimes, when msvcr110.dll is missing, then you will receive some error messages and some of them are listed below:
- The program can’t start because msvcr110.dll is missing from your computer.
- The file msvcr110.dll is missing.
- This application failed to start because msvcr110.dll was not found. Re-installing the application may fix this problem.
- Cannot start {APPLICATION}. A required component is missing: msvcr110.dll. Please install {APPLICATION} again.
So when will the msvcr110.dll missing error message appear? The error message may occur when you use or install certain applications, when you turn on or turn off your Windows, or even when you install Windows.
Then you may wonder how to fix the msvcr110.dll missing error? All methods are listed below. While all the screenshots were taken on Windows 10, most of these methods are applicable to different versions of the Windows system.
Before you try the methods below, you should log on to your computer as an administrator and confirm that the Internet is stable. And if you cannot access Windows normally, then you should boot your computer into Safe Mode.
Method 1: Check the Recycle Bin
If you try to delete some unnecessary files on your computer, but you delete the msvcr110.dll file by accident, then you should check the Recycle Bin.
If the msvcr110.dll file is in the Recycle Bin, then you can just right-click it to choose Restore. Then relaunch the application that causes the error to see whether the error is fixed.
But if the files in the Recycle Bin have been cleaned up by Storage Sense, or you have emptied all the contents yourself, then you should read this post – To Complete Recycle Bin Recovery, This Is What You Should Know.
Method 2: Reinstall the Program That Uses the Msvcr110.dll File
When you try to use or install certain programs, then you may meet the error message saying that the file msvcr110.dll is missing. Therefore, you should try to reinstall the program to solve the problem and then start the program again to check if the error still persists.
Method 3: Copy the Msvcr110.dll File in the System32 Folder
If neither of the methods has solved the problem, you can copy the msvcr110.dll file in the system32 folder from another computer that runs the same operating system as yours and then paste it to the same path (C:\Windows\System32) on your computer.
Tip: You need to have an external storage device such as a USB flash drive and jump drive to perform this method.
And you should notice that the versions (Windows 10/8/7) and the architectures (32-bit/64-bit) of both operating systems must be the same. If you don’t know whether your computer is 32-bit or 64-bit, then you should read this post – Is My Computer 64 Bit or 32 Bit? Try the 5 Ways to Judge out.
After you have pasted the msvcr110.dll file into your computer, try to relaunch the program and the msvcr110.dll missing Windows 10 error should be fixed.
Method 4: Download the Visual C++ Redistributable for Visual Studio 2012 Update 4
You can also try to download the Visual C++ Redistributable for Visual Studio 2012 Update 4 package and install it to get rid of the “msvcr110.dll was not found Windows 10” error. By doing this, the msvcr110.dll file will be replaced or restored with the latest copy provided by Microsoft.
Method 5: Run a Full Virus/Malware Scan
You can meet the msvcr110.dll not found error because of malware or viruses. As you know, malware and viruses could trigger a large number of problems, so you can run a full virus/malware scan on your computer to fix the error.
You can use any third-party antivirus software to do this, and this part takes Windows Defender as an example. Here is a quick guide:
Step 1: Click Start and then click Settings. Then choose Update & Security.
Step 2: Go to the Windows Security tab and then choose Virus & threat protection under Protection areas.
Step 3: Click Scan options and then check Full scan. Click Scan now.
Step 4: Wait for the process to complete, then you can know whether there is any virus or malware. If there is, use Windows Defender to fix it.
Method 6: Update Windows
If there is any available update for your system, then you should update your Windows. And if you don’t know whether there is any update, then follow the instructions below to do that:
Step 1: Open Settings and then select Update & Security.
Step 2: Choose Windows Update and then click Check for updates on the right panel.
Step 3: If there are available updates, your system will download them automatically. After downloading the updates successfully, reboot your PC to perform the installation process. Then check if the error appears again.
Method 7: Test Your Memory
If there is something wrong with your memory, then the file msvcr110.dll could be missing. Thus, you are supposed to test your computer’s memory. There are two ways you can take to test your memory:
Physically Check
Step 1: Plug in and out your RAM to make sure that you have installed it properly and firmly.
Step 2: Make sure that there is no dust in your RAM and the RAM slot.
Step 3: Reboot your computer to check if the error still appears.
Run Windows Memory Diagnostics Tool
Step 1: Press the Win + R keys at the same time to open the Run box.
Step 2: Enter mdsched.exe and then click OK to open the Windows Memory Diagnostic.
Step 3: Click Restart now and check for problems (recommended).
Step 4: Wait for the process to finish, then it will show if there is something wrong with your RAM. If there is, replace the RAM and then restart your computer to check whether the error is gone.
Method 8: Test Your Hard Drive
You should also test your hard drive when the error message “msvcr110.dll is missing” appears. Here is the tutorial:
Step 1: Type cmd in the Search bar and then right-click Command Prompt to choose Run as administrator.
Tip: If you cannot see the Search bar, then you should read this post – Windows 10 Search Bar Missing? Here Are 6 Solutions.
Step 2: Press Enter after typing chkdsk C: /f /r. (C is the letter of the drive where you save your operating system.)
Note: If there is a message saying that “Chkdsk cannot run because the volume is in use by another process. Would you like to schedule this volume to be checked the next time the system restarts” in the Command Prompt windows, then type Y on the keyboard.
Step 3: Wait for the process to complete, then reboot your PC to see if the error happens again.
Method 9: Run a Startup Repair
Running a startup repair could help you fix the problem that the file msvcr110.dll is missing. Here is a quick guide:
Step 1: Open Settings and then choose Update & Security. Go to the Recovery tab and then click Restart now under the Advanced startup section.
Step 2: Click Troubleshoot and then click Advanced options.
Step 3: On the Advanced options screen, click Automatic Repair or Start-up Repair.
Step 4: Wait for the process to finish and then restart your computer to check if the error is fixed.
Method 10: Perform System Restore
If you made a change to an important file or configuration recently, then the file msvcr110.dll may disappear. Therefore, if you have created a system restore point in advance, then you can run System Restore to undo the system changes.
If you don’t know how to do this, then you can read this post – Make The Most Of System Restore In Windows 10: Ultimate Guide.
Method 11: Run a Clean Installation of Windows
The last method you can try to fix the problem that msvcr110.dll is missing is to run a clean installation of Windows. Obviously, you will lose all the files, folders and settings related to your system on your computer if you try this method. So backing up your important data is necessary before trying this method.
Back up Your Important Files
Which backup tool should I try? It is highly recommended to use MiniTool ShadowMaker. It is a piece of useful and professional backup and restore software.
You can use this software to back up files and folders, disks and partitions and even the system. And it is easy to use the Restore feature to restore the backup images are easy. The Sync feature is also very useful when you want to sync files and folders to different locations. At the same time, the Clone Disk is good at making a bootable external hard drive.
Another reason you should try MiniTool ShadowMaker is that the software lets you use it for free within 30 days.
MiniTool ShadowMaker TrialClick to Download100%Clean & Safe
Here are the instructions to use MiniTool ShadowMaker to back up your data:
Step 1: Install and launch MiniTool ShadowMaker, then click Keep Trial.
Step 2: Choose Connect under This Computer to enter the main interface.
Step 3: Go to the Backup page. Click Source and then select Files and Folders.
Note: By default, MiniTool ShadowMaker backs up the operating system and selects the destination.
Step 4: Check all the files and folders that you need and then click OK.
Step 5: Click Destination to choose where you want to save the backup image and then click OK.
Note: You can save your backup image to four different locations: Administrator, Libraries, Computer, and Shared. And it is recommended to save the backup image to the external hard drive.
Step 6: After you have chosen the backup source and destination, then click Back up Now to start to back up files and folders.
Tip: You need to start the task on the Manage page if you click Back up Later.
Step 7: Wait for MiniTool ShadowMaker to finish backing up files and folders.
Reinstall Your System
After you have finished backing up all the important data on your computer, then you can begin to run a clean installation of Windows. Follow the instructions below to do that:
Step 1: Download the Media Creation Tool from Microsoft on a USB flash drive with at least 8 GB storage space and then create a USB bootable drive using this tool.
Note: All the data on the USB flash drive will be removed.
Step 2: Insert the USB bootable drive to your computer and then boot your computer from the USB (change the boot order).
Step 3: Click Install Now and then follow the onscreen instructions to perform a clean installation.
You can read this post – Windows 10 Reset VS Clean Install VS Fresh Start, Details Are Here! to get detailed instructions. And after performing a clean installation of your system, you should get rid of msvcr110.dll missing error.
It is very sad that the file msvcr110.dll is missing, but luckily, after reading this post, I have retrieved the file successfully.Click to Tweet
Final Words
The file msvcr110.dll is missing? Don’t worry! This post has offered you 11 methods to get rid of the problem. And in order to protect your data, you should use MiniTool ShadowMaker to back up your data.
If you have any confusion about the methods or have any better methods to solve the problem, leave a comment below or send an email to [email protected].
Msvcr110.dll Is Missing FAQ
How do I fix msvcr110 DLL missing in Windows 10?
- Check the Recycle Bin.
- Reinstall the program.
- Copy the file.
- Download the Visual C++ Redistributable Packages.
- Run a virus scan.
- Update Windows.
- Test your memory
- Test your hard drive.
- Start-up Repair.
- System Restore.
- Clean installation of Windows.
Where is msvcr110 DLL?
As a part of Microsoft Visual C++, msvcr110.dll is usually used to running applications developed with Visual C++. There are some games and programs that need the file in their installation folder, so you need to copy it from a Windows system folder to the programs’ installation folder.
Why is msvcr100 DLL missing?
The Msvcr100.dll file is missing because there is a Windows component that is not being present on the PC. In order to get it back, you can install the Microsoft 2010 C++ redistributable (x86) package from Microsoft’s website to your computer.
How do I fix missing msvcp100 DLL?
- Download the Microsoft Visual C++ 2010 Service Pack 1 Redistributable Package MFC Security Update.
- Make your Windows up to date.
- Run a full virus/malware scan.
- Run the System Restore.
- Test your memory and hard drive.
- Run a clean installation of Windows.
Проблемы с msvcr110.dl связаны с компонентом Visual C++. Он используется программистами для своих нужд. Ошибка возникает, если софт не находит DLL в системе или она по каким-то причинам не зарегистрирована в реестре. Но, чаще всего, библиотека отсутствует. Причиной неисправности может послужить неполный инсталляционный пакет, скачанный с торрент-трекера. «Перепаковщики» минимизируют размер установщика в надежде на то, что у пользователя уже установлен нужный Visual C++. Поэтому такие установочные пакеты не всегда содержат дополнительные библиотеки, которые нужны для работы.
Иногда нелицензионные игры модифицируют DLL, вследствие чего они перестают корректно работать. Прежде чем начать поиск отсутствующего файла, проверьте карантин антивируса. Возможно, библиотека находится там.
Способ 1: Загрузка msvcr110.dll
Чтобы без дополнительных программ решить проблему с msvcr110.dll, потребуется её загрузить и переместить в папку C:\Windows\System32 подходящим для вас методом или так, как показано на изображении.
Скачать msvcr110.dll
Путь установки DLL может меняться, он зависит от версии операционной системы и её разрядности. К примеру, Windows 7 64 бит потребует иной путь, чем та же ОС с разрядностью х86. Более детально о том, как и куда устанавливать DLL, написано в данной статье. Чтобы узнать, как правильно зарегистрировать файл, следует прочесть другую нашу статью. Эта операция требуется в нештатных случаях, обычно её проводить не нужно.
Способ 2: Скачивание Visual C++
Этот пакет добавляет в компьютер разные DLL, в том числе и msvcr110. Потребуется его загрузить и инсталлировать.
Скачать пакет Microsoft Visual C++ 2012
Попав на страницу для скачивания, понадобится:
- Выбрать язык установки как у вашей Windows.
- Кликнуть по кнопке «Скачать».
- Выбираем соответствующий вариант.
- Нажимаем «Next».
- Соглашаемся с лицензионными условиями.
- Нажимаем «Установить».
Далее потребуется выбрать вариант для конкретного случая. Имеются две разновидности — 32 и 64-битные. Чтобы узнать разрядность вашего компьютера, откройте «Свойства», нажав на «Компьютер» правой кнопкой мыши на рабочем столе. В открывшемся окне вы увидите необходимую информацию.
Далее запускаем установку.
DLL файл попадет в систему и ошибка устранится.
Тут потребуется отметить, что пакеты, вышедшие после версии 2015, могут не дать установить старый вариант. Тогда, воспользовавшись «Панелью управления», нужно будет их удалить и далее установить комплект 2015.
Один из способов должен помочь вам справиться с проблемой отсутствия файла msvcr110.dll.
Наша группа в TelegramПолезные советы и помощь
DLL (Dynamic Link Library) errors are very frustrating and can appear even if you have the mentioned missing file on your computer. One such error is the Msvcr110.dll missing error which appears upon launching a program.
Fortunately, like most DLL errors, the Msvcr110.dll missing error can easily be cured. Here are all the working fixes that will help you eliminate the Msvcr110.dll error.
What Is the Msvcr110.dll Missing Error?
Most applications require DLL files to run on a Windows PC. When a particular DLL file is unavailable on your computer, the operating system will fail to fetch the information from the file and throw the DLL missing error.
Msvcr in Msvcr110.dll stands for Microsoft Visual C++ Redistributable, a very common format for Windows applications. You will see this error message when you try to launch a program that requires Microsoft Visual C++ Redistributable 2012.
The error appears when there’s corruption in the Msvcr110.dll file or if it is missing from your computer. Additionally, you can see this error due to misconfigured registry settings or infection caused by malware or viruses.
Now that you know briefly about the Msvcr110.dll missing error and the reasons behind it, let’s check out all the working fixes.
1. Reboot Your Computer
The first solution you must try is to restart your computer. Doing this will eliminate the possibility of a temporary glitch that might stop your application from getting the required information from the DLL file.
So, restart your computer, rerun the application, and check for the problem. If the issue continues, try the below fixes.
2. Run the SFC Scan
Another effective way to eliminate the Msvcr110.dll missing error is to run the System File Checker, also known as the SFC scan. The System File Checker is a useful command-line utility to scan and repair system files.
Running the SFC scan will replace your computer’s missing or corrupt DLL file. You can run the SFC scan by following the below steps:
- Open the Start menu by pressing the Win key.
- In the search bar, type Command Prompt and choose Run as administrator from the right pane.
-
In the elevated Command Prompt window, type sfc /scannow and press Enter.
Wait until the verification is completed. After the scan is complete, Command Prompt will display a message which tells what changes the scan has made to your computer. The message can also ask you to perform additional steps to repair the corrupt files.
You can get a detailed explanation of the actions you need to perform after the SFC scan on the Microsoft blog.
3. Recover the Missing Msvcr110.dll File
You might face the error message if you mistakenly delete the Msvcr110.dll file. If not you, the other person you share your computer with might have deleted it without your knowledge.
The solution, in this case, is to check and restore the file from the recycle bin. But if the file has been permanently deleted, you can use one of the best data recovery tools for Windows to retrieve it.
4. Download the Missing Msvcr110.dll File
The next solution on the list is to download the missing Msvcr110.dll file. If you fail to retrieve the deleted DLL file, you are more likely to find success with this fix.
To download the Msvcr110.dll file, visit the Visual C++ Redistributable for Visual Studio 2012 Update 4 page. Here you will find all the required information, including the installation instructions and system requirements.
5. Download the Latest Windows Update
The Msvcr110.dll missing error is associated with the Microsoft distributed library; thus, checking for Windows updates can eliminate the issue by downloading the newest version. This will be especially helpful if you have disabled installing updates for some time.
To download the latest Windows update, follow the below instructions:
- Open the Settings menu by pressing the Win + I hotkeys.
- Choose Windows Update from the left panel.
-
Click Check for updates.
Windows will all look for and download any available update. After that, restart your computer and check for the issue.
6. Install Driver Updates
If the Msvcr110.dll missing error appears with particular hardware, you must consider updating its driver. For instance, if you see the error every time you open the webcam, consider updating your webcam driver. And if the error appears upon launching graphics-intensive applications like Adobe Photoshop, try downloading the latest graphics Driver update.
You can download the latest graphics driver update by following the below steps:
- Open the Start menu, type Device Manager in the search bar, and press Enter.
- Expand Display adapters.
-
Right-click on the installed graphics driver and choose Update driver from the context menu.
- Click Search automatically for drivers.
Wait until Windows looks for and downloads the available graphics driver update. After that, launch the application and check for the problem. If it continues, try the next solution on the list.
7. Scan Your Computer for Malware
While the Msvcr110.dll missing error is not necessarily caused due to malware, it could be. It can be the case that an infection might have damaged the DLL file in the past or is interfering with one now.
There are various methods you can use to remove malware from your computer. You can scan your computer without buying an anti-virus app or try using Windows’ built-in security program Microsoft Defender.
8. Reset Windows
Are you still facing the problem? If yes, then you are left with no option other than to reset Windows.
Windows comes with a Reset this PC feature that allows you to reinstall a fresh copy of Windows without losing any of your personal data. But ensure you only follow this fix if none of the above solutions are helpful.
Launch Programs Without Any Issues
It’s very frustrating to face error messages upon launching programs. The Msvcr110.dll missing error is one of the many issues you might face upon launching an application or using a hardware device installed on your computer. Luckily, you can quickly fix the error message by following the above success.
Meanwhile, you might be interested to know more about the Windows DLL files and their importance.
msvcr110.dll is considered a type of Dynamic Link Library (DLL) file. Dynamic Link Library files, like msvcr110.dll, are essentially a «guide book» that stores information and instructions for executable (EXE) files — like ApplicationRegistration.exe — to follow. These files were created so that multiple programs (eg. Sony Movie Studio 13) could share the same msvcr110.dll file, saving valuable memory allocation, therefore making your computer run more efficiently.
Unfortunately, what makes DLL files so convenient and efficient, also makes them extremely vulnerable to problems. If something happens to a shared DLL file, either it goes missing or gets corrupted in some way, it can generate a «runtime» error message. Runtime is pretty self-explanatory; it means that these errors are triggered when msvcr110.dll is attempted to be loaded either when Sony Movie Studio 13 is starting up, or in some cases already running. Some of the most common msvcr110.dll errors include:
- Access Violation at address — msvcr110.dll.
- msvcr110.dll could not be found.
- Cannot find C:\Windows\SysWOW64\msvcr110.dll.
- Cannot register msvcr110.dll.
- Cannot start Sony Movie Studio 13. A required component is missing: msvcr110.dll. Please install Sony Movie Studio 13 again.
- Failed to load msvcr110.dll.
- The application has failed to start because msvcr110.dll was not found.
- The file msvcr110.dll is missing or corrupt.
- This application failed to start because msvcr110.dll was not found. Re-installing the application may fix this problem.
Your msvcr110.dll file could be missing due to accidental deletion, uninstalled as a shared file of another program (shared with Sony Movie Studio 13), or deleted by a malware infection. Furthermore, msvcr110.dll file corruption could be caused from a power outage when loading Sony Movie Studio 13, system crash while loading msvcr110.dll, bad sectors on your storage media (usually your primary hard drive), or quite commonly, a malware infection. Thus, it’s critical to make sure your anti-virus is kept up-to-date and scanning regularly.
Каждый раз, когда я пишу об исправлении той или иной ошибки при запуске игр или программ, я начинаю с одного и того же: не ищите, где скачать msvcr110.dll (конкретно для этого случая, но касается любых других DLL). Прежде всего потому, что это: не решит проблему; может создать новые; вы никогда не знаете, что именно находится в загруженном файле, причем часто самостоятельно скармливаете Windows библиотеку командой regsvr32, несмотря на то, что система сопротивляется. Не стоит потом удивляться странному поведению ОС. См. также: ошибка msvcr100.dll, msvcr120.dll отсутствует на компьютере
Если при запуске программы или игры (например, Saints Row), вы видите сообщение об ошибке, что запуск программы невозможен, так как файл msvcr110.dll отсутствует на данном компьютере, не нужно искать, где скачать этот файл, идти на различные сайты с библиотеками DLL, достаточно просто узнать, составной частью какого программного компонента является эта библиотека и установить его на компьютер. После этого возникшая ошибка вас больше не потревожит. В данном случае, если вам нужно скачать msvcr110.dll, он является составной частью Microsoft Visual C++ Redistributable и, соответственно, загружать его нужно с сайта Microsoft, а не с каких-нибудь сомнительных сайтов DLL-files.
Что нужно скачать, чтобы исправить ошибку msvcr110.dll
Как уже сказано, для того, чтобы исправить ситуацию, вам потребуется Microsoft Visual C++ Redistributable или, по-русски — Распространяемый пакет Visual C++ для Visual Studio 2012, который можно скачать с официального сайта: http://www.microsoft.com/ru-ru/download/details.aspx?id=30679. Обновление 2017: указанную ранее страницу убрали с сайта, теперь скачать компоненты можно так: Как скачать распространяемые пакеты Visual C++ с сайта Майкрософт.
После загрузки, просто установите компоненты и перезагрузите компьютер, после этого запуск игры или программы должен пройти успешно. Поддерживаются Windows XP, Windows 7, Windows 8 и 8.1, x86 и x64 (и даже ARM-процессоры).
В некоторых случаях может оказаться, что пакет уже установлен, тогда можно порекомендовать удалить его из Панели управления — Программы и компоненты, после чего загрузить и установить заново.
Надеюсь, я кому-то помог исправить ошибку файла msvcr110.dll.