Вылетает fallout 4 на рабочий стол без ошибки windows 11

With the popularity of the Fallout TV series, many audiences have become fascinated by the series of games, especially Fallout 4. Not only that, many veteran players have also regained the fun of Fallout 4. However, many of them encounter game crashes during gameplay.

If you also happen to encounter such a situation, please continue reading this article from EaseUS and try the solutions within it.

Картинка с сайта: www.easeus.com

How to Fix Fallout 4 Crashing — 9 Solutions

In the following sections, we will provide 9 feasible solutions to help you solve the Fallout 4 crashing on PC. Let’s fix the problem and return to the game as soon as possible.

1. Fix 1. Check System Requirements
2. Fix 2. Run Fallout 4 in Compatibility Mode
3. Fix 3. Disable All Mods
4. Fix 4. Disable Weapon Debris and Godrays
5. Fix 5. Verify Game Files
6. Fix 6. Restore INI Files
7. Fix 7. Check If Your SSD Is Corrupted
8. Fix 8. Update Drivers
9. Fix 9. Downgrade to Windows 10

Fix 1. Check System Requirements

First of all, you should make sure your PC meets the minimum system requirements to run Fallout 4. Running the game on low-end hardware is often one of the most possible reasons why the game keeps crashing and Steam games not launching. Here are the system requirements of Fallout 4:

Even though it says you need to run Fallout 4 on Windows 10/8/7, you can launch it on Windows 11. If you still have trouble running the game, share this informative page and check the next solution.

Fix 2. Run Fallout 4 in Compatibility Mode

Since Fallout 4 was released in 2015, it may not be able to run successfully on some systems. Therefore, you can try to run Fallout 4 in compatibility mode.

Step 1. Go to the installation folder of Fallout 4 (You may find it in C:\Program Files (x86)\Steam\steamapps\common\Fallout 4 (By default) or C:\Users\username\Documents\My Games\Fallout4.)

Step 2. Right-click the Fallout 4 executable and choose «Properties.»

Step 3. In the Compatibility tab, tick «Run this program in compatibility mode» and select Windows 8 or other older version of Windows.

Step 4. Tick the box beside «Run this program as an administrator» and click «Apply» > «OK.»

This usually resolves compatibility issues and crashes, including Balck Myth: Wukong blue screen and crashing problem:

Fix 3. Disable All Mods

As a game with a lot of freedom and allows players to install all kinds of mods, these mods are highly likely to be the culprits of game crashes. You can disable mods in your mod manager and try launching Fallout 4 again.

If you can run Fallout 4 without crashing after doing so, reinstall your mods one by one to identify any incompatible or corrupted mods causing crashes.

Fix 4. Disable Weapon Debris and Godrays

As I mentioned above, the game was released in 2015, so one of the most common reasons for the Fallout 4 crashing is inappropriate game settings, which can be incompatible with newer systems or hardware. But, many players reported that they have successfully fixed the crashing issue, game not launching, or black screen while gaming by disabling Weapon Debris and Godrays. Here’s how:

Step 1. Open Steam and start Fallout 4 to open its launcher.

Step 2. Go to «OPTIONS» > «Advanced.» Then, set both «Godrays Quality» and «Weapon Debris» as Off (best performance).

Картинка с сайта: www.easeus.com

Step 3. Click «OK» to confirm the changes, and then run Fallout 4.

Some users report the crash is related to fullscreen mode. If the problem remains, try changing the display mode to the borderless window and see if it works. Please share this article with other «survivors» to help them survive longer in the post-apocalyptic world.

Fix 5. Verify Game Files

Steam provides a built-in utility that allows gamers to verify the integrity of game files. If any files are found missing or corrupted, it will automatically restore or replace those files and eventually fix the game crash issue.

Step 1. Open Steam and locate Fallout 4 in your Library.

Step 2. Right-click on Fallout 4 and click on «Properties.»

Step 3. In the «Installed Files» tab, select «Verify integrity of game files» to check and repair any corrupt or missing files needed to run the game.

Картинка с сайта: www.easeus.com

Fix 6. Restore INI Files

Certain file corruption and conflicts with game settings can also lead to Fallout 4 crashing. You can try restoring the related .INI file to its default state to fix the problem.

Step 1. Go to the Fallout 4 directory location. (You may find it in C:\Program Files (x86)\Steam\steamapps\common\Fallout 4 (By default) or C:\Users\username\Documents\My Games\Fallout4.)

Step 2. Locate and select «Fallout4.ini,» «Fallout4Custom.ini» and «Fallout4Prefs.ini.» Then, delete these files to reset the game settings.

Картинка с сайта: www.easeus.com

Step 3. Launch Fallout 4, and Steam will replace these files automatically.

This will reset Fallout 4 settings to default and fix any issues with corrupted INI files.

Fix 7. Check If Your SSD Is Corrupted

So I recently got an SSD hard drive now after moving fallout 4 to my new SSD drive the game just crashes on start up..Loads up, 5 seconds into the intro scene and crash, The game was working before on my normal harddrive I do have mods installed but turning them all off didnt fix it so it can’t be mods. from Steam Community

There are reports suggesting Fallout 4 starts to crash after being moved to SSD. If this is the same scenario as yours, you can download EaseUS Partition Master to check the file system and bad sectors for the SSD.

Faulty SSD may lead to programs being unable to launch correctly. Here’s how to fix it:

Step 1. Right-click the target partition that may have a problem.

Step 2. Choose «Check» > «Check File System».

Step 3. In the Check File System window, check the «Try to fix errors if found» option by clicking the «Start» button. 

Step 4. Please wait patiently. After the process, you can click the «Finish» button to exit the window. 

If this doesn’t fix the issue, you may have to transfer Fallout 4 back to HDD. The article below offers an easier way to move games between different drives and allow it to be able to launch directly.

Fix 8. Update Drivers

Outdated drivers can cause compatibility problems and crashes. Thus, make sure to update your graphics drivers to the latest version. You can download and install the corresponding GPU driver on the official websites. (NVIDIA / AMD / Intel)

Besides graphic drivers, it’s possible that other drivers can cause Fallout 4 to crash. You can use EaseUS DriverHandy to detect all outdated drivers on your computer. After that, you can use this tool to update these drivers automatically with one click.

Fix 9. Downgrade to Windows 10

Some players reported that they have trouble running Fallout 4 on their Windows 11 PC. This might be caused by the compatibility issue between Windows 11 OS and Fallout 4 game files.

To resolve Fallout 4 crashing on Windows 11, you can consider rolling the system back to Windows 10. The following page contains everything you need to perform the operation.

Conclusion

The most common causes of Fallout 4 crashes are corrupted game files, incompatible mods, inappropriate game settings, and outdated drivers. By following these troubleshooting steps, you should be able to identify and resolve the issue causing your game to crash on startup or during play.

Below are some other often-asked questions about Fallout 4 crashing by other players.

1. Why does Fallout 4 crash without mods?

If Fallout 4 crashes even if there’s no mods installed, it’s most likely caused by low-end hardware, inappropriate game settings or outdated drivers.

2. Why won’t Fallout 4 start after modding?

If you activate too many mods, Fallout 4 may experience issues such as slow loading or crashing at startup due to conflicts or cache issues with some of files.

3. How to fix Fallout 4 black screen?

To fix Fallout 4 black screen issue, you should:

1. go to C:\Program Files (x86)\Steam\steamapps\common\Fallout 4 (By default) and C:\Users\username\Documents\My Games\Fallout4.

2. Open «Fallout4Prefs.ini» and change its settings to the following:

• bTopMostWindow=0
• bMaximizeWindow=1
• bBorderless=0
• bFull Screen=1
• iSize H=1080 (Replace it with your own resolution height)
• iSize W=1920 (Replace it with your own resolution width)

3. Then, open the Nvidia control panel (if you are using it) and set the limit of Max Frame rate to 60 FPS.

When you try to open the game, Fallout 4 loads but closes immediately after the loading. Some gamers may notice that Fallout 4 doesn’t load at all when you manage to access it. The game closes unexpectedly and stops responding. You have no idea what happened.

Картинка с сайта: tencomputer.com

Sometimes, only a game like Fallout 4 and Age of Empires stops working, while you may also encounter the error that all Steam games close instantly after the startup. In this post, you can learn the solutions to fix the Fallout 4 opening then close on Windows 11 or Windows 10.

How to Fix “Fallout 4 Opens and then Closes” Error on Windows 11/10?

Normally, Fallout 4 loading failure or not working after loading issue results from various culprits. Different gamers may run into this game error due to different causes.

Mostly, the Fallout 2 game package, the Windows system, the compatibility issue between the game and the system, the graphics card driver, essential game components, and game cache are common causes that lead the game to open but then close immediately. Therefore, you may as well try to fix this problem from these aspects.

Solutions:

1. Check Fallout 4 Updates
2. Clean Boot Windows 11
3. Run Fallout 4 in Compatibility Mode
4. Check for Windows 11 Updates
5. Update Graphic Drivers and Other drivers
6. Download and Update Essential Game Components
7. Verify the Game’s Cache
8. Uninstall and Reinstall Fallout 4
9. Run a Full System Scan

Solution 1: Check Fallout 4 Updates

Normally, game developers will keep updating the game
to provide new features or fixes to get rid of bugs. In this way, you might as
well try to navigate to Steam’s official website to download the latest Fallout
4 version. If the Fallout crashing at startup originates from the game issues,
you may open and play it as normal after installing the latest game package.

Solution 2: Clean Boot Windows 11

A clean boot can allow users to boot up the system with minimal programs, so it is a perfect choice for users to do a clean boot on Windows 11 to solve various problems.

In this case, you can try to clean start up the system to troubleshoot the Fallout not loading or closing immediately after the loading error. 

Solution 3: Run Fallout 4 in Compatibility Mode

After the Windows system upgrade, odds are that
Fallout 4 isn’t compatible with Windows 11 or Windows 10. Hence, you can manage
to run this game in compatibility mode to avoid Fallout 4 opening but exiting
automatically without loading.

1. Locate and right click Fallout 4 and then
select Properties.

2. Under the Compatibility tab, click Run this program in compatibility mode.

3. Select a Windows system like Windows 10.

In so doing, the game will run in compatibility mode.
When you try to access it again, you can find that Fallout 4 opens and runs as
before.

Solution 4: Check for Windows 11 Updates

Apart from the game package, Windows 11 is also likely
causing Fallout 4 not to respond after the loading. You need to check for
system updates to get the improved features to run the Steam game as normal.

1. In the search box, type in check for updates
and then hit Enter to move on.

2. Under Windows Update, on the right pane, try
to Check for updates.

If you have allowed the automatic system update, you
can observe Windows 11 is automatically checking for updates when you enter the
system settings.

Solution 5: Update Graphic Drivers and Other drivers

The display driver is closely associated with the game performance. In this case, if your graphics card driver is outdated, missing, or corrupt, chances are that Fallout 4 opens and closes automatically with no response.

Hence, you may as well try the professional and automatic driver tool, Driver Booster, to download and install the latest graphics driver or any other drivers like the network driver.

1. Download, install and run Driver Booster.

2. Click the Scan option.

3. In the result, find out Display adapters and then Update the graphics driver.

Картинка с сайта: tencomputer.com

You can find that the updated graphics driver may allow Fallout 4 to load and run smoothly. You can now enjoy the game as you wish.

Solution 6: Download and Update Essential Game

Apart from drivers like the display drivers, some game components like DirectX, OpenAL, and OpenGL are also likely to lead to Fallout 4 starts but crashes on Windows 11.

Especially, after you upgraded the game from Windows 7/10 to Windows 11, you can often hit upon various issues like game crashes.

Картинка с сайта: tencomputer.com

In this case, you can also rely on the professional tool, Driver Booster, to search for, download, and install the essential game components after the scan. Once the game components are downloaded and updated, restart Fallout 4 to check whether it responds at startup or after the loading.

Solution 7: Verify the Game’s Files

In case there are corruptions in the game files, you can also verify the integrity of files. Normally, gamers can check the status of the game files on the game platforms like Steam. Therefore, try the steps below to verify the game files.

1. Start Steam and then find out Library.

2. Locate Fallout 4 and right click it to open its Properties.

3. Under Local files, choose to Verify integrity of Game Cache.

Картинка с сайта: tencomputer.com

Wait until the platform automatically troubleshoots
problems with the game files. If the files are working well to support the game
to run, you can have to remove the problematic Fallout 4 now that it crashes at
startup. While verifying gaming files may help fix Fallout
4 crashing at startup on Windows 10, 8, and 7, according to user reports.

Solution 8: Uninstall and Reinstall Fallout 4

You may have to get rid of the Fallout 4 game when
noticing it opens and then closes immediately. After uninstalling the
problematic game application, you can go to the official website and then
download the latest game package.

1. In the search box, input the control panel
and then stroke the Enter key.

2. In Control Panel, go to Programs >
Uninstall a program.

3. In Programs and Features, locate and right
click Fallout 4 to Uninstall.

4. Reboot Windows 11.

After that, head to the Fallout or Steam official
website and search for the Fallout 4 package. Download and install it on your
Windows device. This time, you can see Fallout 4 opens and loads normally on
Windows 11.

Solution 9: Run a Full System Scan

Sometimes, viruses or malware can also lead to game crashes at startup on Windows 11/10. In this case, you should scan the whole system regularly to remove the virus or malware. That will protect your system, programs, files, and registries from threatening items. Advanced SystemCare, in this way, can be a highly efficient tool for you to automatically scan the system and fix various issues.

1. Download, install and run Advanced Systemcare.

2. Under Care, tick the box of Select all and then hit Scan.

3. Wait until the scan stops, and then click Fix.

Картинка с сайта: tencomputer.com

You can see the tool quickly removed all the viruses, malware, and corrupt files and registries. Fallout 4 may be running smoothly without any corrupt files or registries.

Summary:

If you find that Fallout 4 opens but closes immediately on Windows 11/10, you can try to fix it by dealing with the game package, system, game file, and game component errors. For most gamers, you can resolve this Fallout 4 not responding or loading after being launched.

More Articles:

Fixed: Fallout 4 Long Load Time on Windows 11, 10, 8 and 7

Solved: Fallout 4 Script Extender Not Working

Resolved: Skyrim Infinite Loading Screen Quickly and Effectively