Все изученные нами случаи появления синего экрана смерти WDF_VIOLATION непосредственно связаны с драйверами. Это могут быть устаревшие или плохо совместимые драйвера устройств. Чаще всего жалуются на данный BSOD те, у кого есть какая-то периферия Apple или используются различные док-станции USB-C. Также в наибольшей зоне риска владельцы HP, хотя и у пользователей Lenovo проблема может появиться. Встречаются жалобы и у тех, кто не подпадает под перечисленные критерии.
Как убрать BSOD WDF_VIOLATION?
Основная задача – найти виновника BSOD. С высокой долей вероятности речь идет об одном из последних установленных или обновленных драйверов. Есть и более точный способ диагностики с помощью программ. Например, BlueScreenView. Это простой инструмент, который может указать, какой именно драйвер виновен. Только программа давно не поддерживается, поэтому нет гарантий, что это сработает.
Путем тестирования, возможно, даже поштучного перебора, должно получиться найти виновника. Нам известно, что порой BSOD вызывают драйверы клавиатуры Apple, а также драйверы Realtek. Их следует попробовать обновить или переустановить. Еще стоит удалить файлы драйверов HpqKbFiltr.sys, wdfilter.sys и MacHALDriver.sys, которые находятся в папке Windows/System32/drivers. Достаточно просто переименовать файл для исправления ошибки. В этом случае можно будет всегда восстановиться.
Все то, что удалось в сети, свидетельствует о проблеме с драйверами. Код остановки WDF_VIOLATION появляется либо из-за поврежденных, либо устаревших драйверов. Остается только найти проблемный элемент и проблема будет решена. При чем, если даже автоматически система не находит обновление, следует зайти на официальный сайт и проверить.
Blue Screen of Death is one of the most common Windows errors that abruptly crashes the entire system and negatively impacts your productivity. Many Windows 11/10 users are currently facing the BSOD error with the WDF_VIOLATION stop code. The error code indicates that Kernel-Mode Driver Framework has detected issues with the Framework-Based Drivers.
Recently, one of our team members was also repeatedly experiencing the same problem. After attempting different troubleshooting methods, they fixed this error from the roots. To check those tried and tested solutions, read this article and you should be able to resolve the WDF_VIOLATION error in your Windows 11/10 PC.
What Causes WDF_VIOLATION Error in Windows 11/10?
Here are some sources that are likely to cause the BSOD WDF_Violation error.
- Faulty Hardware
- Corrupted System Files
- Inaccurate BIOS Settings
- Outdated Drivers
- Less RAM
- Fault In Bluetooth Drivers
- Issues With USB Ports
- Third-Party Software
- Malware or Virus
Fix WDF_VIOLATION Error in Windows 11/10
Here in this section, we have mentioned over twelve most working solutions to help you login back into your system without interruption.
1. Rename Faulty HP Keyboard Driver
Many HP laptop users reported that a driver named, HpqKbFiltr.sys developed this issue on their machines. They also added that this particular driver was installed on their HP laptop through Windows Cumulative Update. Hence, this could be the same in your case if you are using an HP laptop. One of the ways to fix this issue is renaming the driver. You can follow along to rename the driver.
1. Open the Settings app by pressing Win + I.
2. Search for the Recovery section and click on it.
3. Click on Restart now to get access to advanced startup options.
4. You will now see various options on the Choose an option window. Click on Troubleshoot from the given options.
5. Now, click on Advanced options in the Troubleshoot menu.
6. Click on Command Prompt once you enter the Advanced options window.
7. Execute the below-mentioned commands in CMD to rename HpqKbFiltr.sys keyboard driver.
C:cd C:\Windows\System32\driversren HpqKbFiltr.sys HpqKbFiltr.sys.bak8. Reboot the PC after executing the mentioned command. Your PC should now start properly without the BSOD WDF_VIOLATION error.
2. Remove the Faulty HP Keyboard Driver
If renaming the HpqKbFiltr.sys driver doesn’t solve the problem, you can now try removing the HP keyboard driver. Don’t fret. Removing a malfunctioned driver doesn’t affect your system’s performance. Your system will automatically install the missing driver when needed. We have explained the process of removing the HpqKbFiltr.sys driver in the below-mentioned steps.
Note: Before implementing the below-mentioned steps, ensure that your PC is booted into Safe Mode. If not, you can check above steps to do so.
1. Boot your PC into Safe Mode and open Command Prompt.
2. Execute the mentioned command in CMD.
For 32-bit System:
dism /Image:C\ /Remove-Driver /Driver: C:\Windows\System32\DriverStore\FileRepository\hpqkbfiltr.inf_x86_f1527018cecbb8c2\HpqKbFiltr.infFor 64-bit System:
dism /Image:C:\ /Remove-Driver/Driver: c:\Windows\System32\driverstore\FileRepository\hpqkbfiltr.inf_amd64_714aca0508a80e9a\HpqKbFiltr.inf3. That’s it. The faulty keyboard driver must be removed now. Reboot your PC normally and check the status of the issue.
3. Try Disconnecting USB Peripherals
Faults in your system’s hardware could also lead to issues like this. We are referring Hardware to USB Peripherals attached to the PC. Many Windows 11/10 users encountered the error because of faulty USB peripherals or USB ports.
We suggest disconnecting all the USB peripherals one by one and rebooting the PC simultaneously. If the error gets fixed after disconnecting a specific USB device, we recommend replacing that particular accessory with a new one to avoid the same problem in the future.
4. Use Windows Driver Verifier Tool
One of the reasons for the WDF_VIOLATION error is an issue with the Framework-Based Drivers. But, there isn’t a straightforward method to detect the malfunctioned driver. You must first enable Minidumps and use the Driver Verifier Tool to continuously monitor all Kernel-Mode Drivers and Graphics Drivers. Follow the mentioned steps to use the Driver Verifier Tool to find out the culprit of the issue.
1. Press Win + R to open the Run program and type sysdm.cpl.
2. Head to Advanced > Startup & Recovery > Settings.
3. Uncheck the Automatically Restart option.
4. Select the Small memory dump (256 KB) option from the drop-down list under the Write debugging information section.
5. Make sure to set the Small dump directory to %SystemRoot%\Minidump.
6. Click on OK to save the changes and reboot the PC.
7. Run Command Prompt as administrator.
8. Type verifier in CMD and press Enter.
9. You will now see the Driver Verifier Manager window. Choose the Create custom settings (for code developers) option.
10. Check all the present in-the-box options, except Randomized low resources simulation and DDI compliance checking.
11. Click on the Select driver names from a list option.
12. Once done, select all the drivers that aren’t related to Microsoft Corporation. You can identify this by checking the Provider’s name.
13. Lastly, click on the Finish button to save the changes.
That’s it. Now, wait for the next crash and the system to automatically create a DMP file. You can simply read the DMP file using the BlueScreenView tool.
5. Update Bluetooth Drivers
Some Windows 11/10 users used the method mentioned above to create a DMP file. A few users reported that their DMP file declared Bluetooth drivers as the culprit of the issue. Fortunately, updating the Bluetooth drivers fixed the problem for them, and you can try the same. Follow the below-mentioned steps to update Bluetooth drivers from the Device Manager.
1. Press Win + R and type diskmgmt.msc in the search box.
2. Click on Bluetooth to get a list of all Bluetooth drivers.
3. Right-click on the Bluetooth driver and click on the Update driver.
4. Follow the same steps with other Bluetooth drivers.
5. In the end, reboot the PC to see if the PC restarts normally or is still facing the same issue.
6. Scan For Viruses
It could be possible that your system has some infected files and applications that created this issue. We suggest running a Quick and later Detailed Scan to ensure everything on your system is safe. For this, You can use Windows’s Microsoft Defender Antivirus tool.
1. Press the Windows key.
2. Type Virus & threat protection and open it.
3. Click on the Quick scan.
4. Wait until the scan completes and see the results. If the scanner finds something infected, you can cross-check it and remove it.
5. Click on the Scan options.
6. Select the Microsoft Defender Antivirus (offline scan) option.
7. Click on the Scan now to run a detailed scan.
7. Run Windows Memory Diagnostic
BSOD error appears for many reasons, and one of the most common causes is defective hard drives. It could be possible that there are some issues with your hard drive. You can use the Memory Diagnostic tool to ensure your hard drives are in the perfect and working state. This tool will help you find and fix all problems related to the applications and memory with ease. You can follow the mentioned steps to use the Memory Diagnostic.
1. Press the Windows key and type Memory Diagnostic in the Search Box.
2. Click on Windows Memory Diagnostic.
3. Select Restart now and check for problems.
4. Your system will now reboot, and the tool will automatically start scanning for issues.
8. Use Disk Cleanup Tool
There is a possibility that the system isn’t getting ample storage to execute essential tasks, resulting in this issue. If this is the case, it can be easily fixed by freeing up some storage. Windows has an integrated Disk Cleanup tool that lets you clean unnecessary files in a few steps. Follow along to free up some space using the Disk Cleanup tool.
1. Press the Windows key and search Disk Cleanup.
2. Click on the Disk Cleanup.
3. Select Downloaded Program Files, Temporary Internet Files, Thumbnails, and Temporary Files.
4. And finally, click on Clean up system files.
9. Uninstall Recent Updates
Several Windows 11/10 users reported that they started facing this issue after installing a Windows Cumulative Update. If you also started this error after the new update, then the culprit of the entire issue is in front of you. You can instantly fix the issue by uninstalling the update. You can follow along to do so.
Note: It is necessary to enter into Boot Mode before uninstalling recent updates. We recommend doing this to be on the safer side.
1. Open the Settings App and move to the Recovery settings.
2. Click on the Restart now button.
3. On the Choose an option window, click on Troubleshoot.
4. Then, click on Advanced options and head to Startup Settings.
5. Press F5 to enter into Safe Mode with the Internet.
6. Your PC will now restart only with essential drivers and applications. Press the Windows key and search Windows Update Settings.
7. Head to the Update history section in the Windows Update settings.
8. Scroll down and click on Uninstall Updates.
9. Click on Uninstall next to the recently installed Windows update.
10. Uninstall Recently Installed Applications
If you are getting WDF_VIOLATION issue after installing a new application, then uninstalling that recently installed app would be an ideal solution. We have explained the same in the below-mentioned steps.
1. Press Win + R, type appwiz.cpl, and hit Enter.
2. Try to remember the recently installed application/s and find them in the list of given applications.
3. Once found, right-click on the app and select Uninstall.
11. Run DISM, SFC Scan
In case the issue doesn’t fix after trying all the major solutions, then corrupted system files are expected to be the reason behind the issue. You can quickly find all the corrupted files by running a DISM and SFC scan. Follow the below-mentioned steps to do the same.
Run DISM Scan To Check for Files Integrity
1. Open CMD or Terminal as administrator.
2. Execute the mentioned command and press the Enter key: DISM.exe /Online /Cleanup-image /Restorehealth
3. Once the scan completes, restart the PC.
Quick SFC Scan To Fix Corrupted Files
1. Execute the mentioned command: SFC /scannow
2. Press the Enter key.
3. Restart the PC
12. CHKDSK Repair Command
Besides, we also suggest running the CHKDSK repair command to fix all errors related to your hard drive.
1. Run Command Prompt as administrator.
2. Copy and paste the mentioned command in the CMD and press Enter key: chkdsk /f C:
3. Restart the PC.
4. Open Event Viewer after the PC restarts.
5. Expand the Windows Logs section and click on Application.
8. Search for Wininit and double click on it to open Event Properties windows.
10. On the Event Properties windows, you will see the errors found during the scan.
13. Reset BIOS Settings To Default
Putting BIOS settings to default could also fix the WDF_VIOLATION issue. However, not many users tried and suggested it. But, we found it useful because resetting the BIOS setting will make everything fresh. Hence, there are chances that this issue might disappear after doing this. Below are the steps to reset the BIOS settings in Windows 11.
1. Press Win + I to open the Settings window.
2. Open the Recovery section and click on the Restart now button under the Recovery options.
3. You will now be entered into the boot settings. Click on Troubleshoot on the Choose an option screen.
5. Select Advanced Options and then choose UEFI Firmware Settings.
7. Click on Restart to open the BIOS mode settings.
8. Press F9 to open Setup Defaults.
9. Lastly, select Yes using the keyboard arrow keys.
14. Reset the PC
If none of those mentioned above solutions works, the last option is to reset the PC and get everything back to the default state. We have mentioned the entire process of resetting the Windows 11/10 PC below.
1. Open the Settings app.
2. Head to the Recovery settings.
3. Click on Reset PC.
4. Select the Keep my files option.
5. Your system will now return to the default state.
Frequently Asked Questions
How Do I Permanently Fix Blue Screen on Windows 10?
There are several ways to fix the blue screen error on Windows 10. One of the best ways is by uninstalling the recently installed Windows updates. You can also try using the Windows Driver Verifier tool to find the main culprit and rectify it accordingly.
How Do I Fix Blue Screen in Safe Mode?
You need to first open your system Settings app by pressing Win + I. Afterwards, head to the Recovery options and select Restart to open BIOS settings. First, click on Troubleshoot and then select Advanced options. Now, click on Command Prompt on the Advanced options screen. You can now try uninstalling recently installed third-party applications, recent updates, and Bluetooth drivers.
Can Not Fix Blue Screen of Death?
Blue Screen of Death mainly emerges due to hardware issues. Your PC might be having some hardware issues. In this situation, you can try hardware troubleshooting methods, such as fixing hard driver errors, clearing RAM sticks, etc.
Can RAM Cause Blue Screen?
Sometimes flaws in the RAM also lead to BSOD error. You can fix this error by trying different hardware and software troubleshooting methods.
Does BSOD Damage Your Computer?
Blue Screen of Death (BSOD) doesn’t damage your computer. It doesn’t affect your system files, applications, and anything else.
Final Words
You are working or playing, and everything suddenly stops due to a system crash. It ends up with a blue screen with an error code, WDF_VIOLATION. Getting this error could be frustrating and ruin your entire mood and day. We suggest trying the above-mentioned solutions to fix the WDF_VIOLATION Error in Windows 11/10.
WDF_VIOLATION in Windows 10 typically means that Windows has discovered a flaw in a framework-based driver. WDF stands for Windows Driver Framework and it’s a driver issue.
It is less likely that your hardware is to be blamed for this problem. As a result, finding solutions to this issue is not too difficult. Let’s dig deeper into the article and look at the causes of this malicious BSOD error and how you can fix it.
How to try a solution if the PC won’t boot up?
To try the solutions in the article, you must log into Windows on the faulty PC. If you cannot boot into Windows, power on and off your computer three times to do a hard reboot and restart it in Safe Mode before attempting these methods.
We will also mention how to boot your PC in Safe Mode. So if your PC does not turn on, look at the solutions to find out how to boot Windows with minimal drivers.
How to fix WDF_Violation Blue Screen Error on Windows 11
1. Update Device Drivers
As was already mentioned, the WDF_Violation Windows 10 is typically brought on by specific drivers’ corruption, most commonly the display or video driver. Updating your PC’s drivers is, therefore, the simplest thing for you to do. You can update your device drivers either manually or automatically.
To update manually:
- Type device manager into the taskbar’s search box, click on Device Manager.
- To see the names of the devices, choose a category, right-click the device you want to update, then select Update Driver.
- Choose Search automatically for drivers.
- You can attempt to find a new driver on the device manufacturer’s website and follow their instructions if Windows cannot do so automatically.
To update automatically with third-party software:
Third-party apps can automatically update your drivers if you lack the time, patience, or computer skills to do so manually. The apps will automatically detect your system, locate proper drivers for it and your specific version of Windows 10, download, and install them.
You can see a list of the best third-party driver update apps below:
- Driver Easy
- DriverFix
- IOBit Driver Booster 9
- DriverMax
Here’s how to update the drivers using the app:
- Install one of the apps listed above.
- Launch the app and press the Scan button. The application will then scan your computer for problematic or outdated drivers.
- The drivers will be downloaded automatically when you click the Update button next to the marked devices, and the application will install them for you.
- Alternatively, you can click Update All to automatically download and install all your system’s outdated or missing drivers.
Note: Since this is a general how-to and these steps will direct you to use four different applications, the options and buttons named above may have different names in the application.
2. Use Driver Verifier
Microsoft offers a Driver Verifier tool to monitor Windows drivers and graphics drivers to find any unauthorized actions that could harm the system. To use Driver Verifier, you must be a member of the computer’s Administrators group.
Your computer might crash in the middle of the session. You must, therefore, only try this solution after you have backed up all your crucial data and files.
- Press the Windows and X keys simultaneously on your keyboard, and then select Command Prompt (Admin) or Windows Terminal (Admin).
- Click Yes when asked to grant administrator permission.
- In the Command Prompt window, type verifier and press Enter.
- To proceed, select Create standard settings and then click Next.
- Choose Automatically select all drivers installed on this computer. The verification will then begin after you click Finish.
After the detection process is complete, simply follow the directions to fix the stop code WDF_Violation blue screen error.
3. Repair system files
System files on your computer that are missing, corrupt, or damaged may be the root of the WDF_Violation blue screen error. You need to run a Windows repair to see if this is the situation. Windows has a useful System File Checker (SFC) that scans your system files and fixes any missing or damaged system files (including those related to BSOD).
To start the SFC scan:
- Press the Windows logo key and type cmd on your keyboard. Then, on the Command Prompt menu, select Run as administrator.
- When prompted to confirm, select Yes.
- Type sfc /scannow into the command prompt window and press Enter.
- Restart your computer for the changes to take effect.
4. Boot the Windows in Safe mode
When booting the system in the safe mode, the operating system launches in diagnostic mode instead of normal operating mode. It is primarily used to troubleshoot systems that have crashed, failed to boot properly, or are unstable after installing an update, a device driver, or a new software.
To isolate issues causing system instability, such as WDF_Violation, the operating system loads just a minimal set of drivers and services in this mode. To boot the system in safe mode:
- In the bottom-left corner, click the Windows icon.
- Click Restart after selecting the Power icon while holding down the Shift key.
- After restarting, a blue screen with the title Choose an option will appear. Select Advanced options after choosing Troubleshoot.
- After selecting Startup Settings, click Restart. Your computer will switch on and off.
- When the screen reappears, the system will give you a few choices. Press either 4 or 5 to start your computer in Safe Mode with internet access.
Unnecessary device drivers or startup programs may cause the issue if you don’t experience it again after starting in Safe mode.
5. Reset Windows
You can reset your Windows, which will cause the system to install a set of new drivers and potentially fix the WDF_Violation BSOD problem. But you should remember that resetting your PC will delete all your files, so you need to create a backup before attempting to reset Windows.
- Go to the search field in your taskbar and type reset, click on Reset this PC.
- Select Get started or Reset this PC.
- You will have a choice between two possibilities. To restore the computer to its “new” state, select Remove everything.
- Click Confirm or Next on the next few windows.
- Your PC will restart a few minutes later with a completely new set of drivers.
There is also another method that will not only recover the files without a backup but also retain your files even when your PC can’t boot up due to the WDF_violation stop code.
Stellar Data Recovery Professional for Windows will recover your lost files from the chosen hard drive. You can also create bootable media, which will recover your files from your unbootable PC. Both procedures are presented below with their step-by-step how to:
To recover files from a hard drive:
- Install the Stellar Data Recovery Professional.
- Open the application, select the type of data you want to recover, and click Next.
- Select the folder location or drive volume and click Scan.
- Select files after the scan and click Recover to save recovered data.
To recover files from an unbootable PC:
- Connect the USB drive to an operational Windows computer. You need an empty USB flash drive for this (at least 1GB size).
- Launch Stellar Data Recovery Professional after downloading and installing it.
- In the top-right corner of the Select What to Recover screen, select the Waffle Menu.
- Choose the option to Create Recovery Drive.
- Use the drop-down list to select the USB drive from the Create Recovery Drive dialog box.
- To start the procedure, select Create Recovery Drive and OK.
- A new Activation window appears after the procedure. After purchasing the product, enter the Activation Key you received via email in the box provided and press the Activate button.
- Connect the bootable USB media to your Windows computer that has crashed or won’t boot.
- Turn on your computer, then start pressing the F12 boot option key to view any connected bootable USB media. For more information, consult the manufacturer’s support website for your laptop or motherboard.
- Using the arrow down button, move the selection to a bootable data recovery media, then press Enter to boot the computer.
- You will see the interface for Stellar Data Recovery software once the computer has booted from USB media.
- Choose the file type(s) you want to recover from the Select What To Recover screen and press Next.
- Click Scan after selecting the Windows drive from which you want to recover data.
- Select all the files you want to recover after the scan. Additionally, you can preview files to ensure they are undamaged and retrievable.
- Click Recover to save the files.
- To save the recovered data, click Start Saving at the end.
What should I do if none of the fixes worked?
Taking the PC to a technician will be the last resort, but before doing that, you can recover the files from the computer in case, the technician decides to clean wipe your drives or change the storage.
Technicians have the knowledge to fix such problems daily; thus, using their services can save time and other concerns.
Get rid of the BSOD once and for all!
Corrupt drivers, faulty hardware, excessive heat, RAM problems, or the stress of applications on the system’s capabilities are the usual causes of blue screen errors. However, in this instance, the error code for the violation shows that the drivers are at fault.
This is good news because software fixes are much simpler and less expensive than replacing hardware, which can be expensive.
Overall, the WDF_Violation is one of the less serious BSOD errors that the user can usually fix; if not, Stellar Data Recovery Professional, a Professional data recovery software, has you covered.
FAQ
What type of files can Stellar Data Recovery Professional software recover?
Stellar Data Recovery can retrieve a wide variety of file types. Files in various formats, such as documents, emails, photos, audio files, and videos, can all be recovered.
How can I be sure that the Stellar Data Recovery tool will return my data?
The likelihood of data recovery and success depends on several variables, including the drive’s condition, the cause of data loss, and the amount of time that has passed since the user first used Stellar Data Recovery Professional to recover lost data.
Therefore, as soon as possible, after a data loss occurs, use the Stellar Data Recovery Professional program if you want to recover up to 100% of the data on your Windows PC or external storage media.
Can I select a specific file to recover?
You can right-click on a specific file and choose to recover when the application has finished scanning your drive and presents the files in a list-like view.
Was this article helpful?
YES0
NO
The Blue Screen of Death (BSOD) is a term that strikes fear into the hearts of Windows users. Among the many types of BSOD errors, the WDF Violation error, which refers to the Windows Driver Framework, can be particularly frustrating. This error is usually followed by the message «WDF_Violation» and can occur due to driver issues, software conflicts, or even hardware malfunctions. If you’re facing this problem on Windows 10 or 11, don’t worry. This comprehensive guide will walk you through eight effective methods to fix the WDF Violation BSOD error.
Understanding WDF Violation Error
Before diving into the solutions, it’s essential to understand what the WDF Violation error signifies. The Windows Driver Framework is a set of tools provided by Microsoft to facilitate the development of driver software. When there’s a problem in how these drivers interact with the operating system—this can happen due to outdated drivers, corrupted files, or conflicts with other software—the WDF_Violation error can be triggered.
This BSOD can lead to unexpected crashes and loss of unsaved data, making it important to address the issue promptly. Here are eight ways you can troubleshoot and fix this error.
1. Update Your Drivers
One of the most common causes of the WDF Violation error is outdated or incompatible drivers. If your hardware is running on outdated drivers, it might be unable to communicate effectively with the operating system, resulting in a BSOD.
Steps to Update Drivers:
- Press
Windows + Xand select Device Manager. - Look for devices with a yellow triangle icon—they indicate driver issues.
- Right-click on the problematic device and select Update driver.
- Choose Search automatically for updated driver software. Allow Windows to search and install the latest drivers.
- Restart your computer to apply changes.
If Device Manager does not find a new driver, consider visiting the manufacturer’s website to manually download and install the latest driver.
2. Roll Back Drivers
If you started experiencing the WDF_Violation error after updating a specific driver, the update may have caused compatibility issues. In this case, rolling back the driver to a previous version may help.
Steps to Roll Back Driver:
- Open Device Manager.
- Navigate to the device whose driver you want to roll back.
- Right-click and select Properties.
- Go to the Driver tab and click on Roll Back Driver.
- Follow the prompts to complete the rollback, then restart your computer.
3. Run Windows Update
Sometimes, the underlying cause of driver-related issues may be addressed in a system update. Therefore, checking for Windows updates is always a good practice.
Steps to Run Windows Update:
- Go to Settings by pressing
Windows + I. - Click on Update & Security.
- Select Windows Update.
- Click on Check for updates. Allow any pending updates to install.
- Restart your computer if required.
Keeping your operating system up-to-date can ensure better performance and compatibility with installed applications and hardware.
4. Check System Files with SFC and DISM
Corrupted system files can lead to various issues, including BSOD errors. Using the System File Checker (SFC) and Deployment Image Servicing and Management (DISM) tools can help repair these files.
Steps to Run SFC:
- Press
Windows + Xand select Command Prompt (Admin) or Windows PowerShell (Admin). - Type
sfc /scannowand press Enter. This process may take some time to complete. - Once done, check if any integrity violations were found and if they were repaired.
Steps to Run DISM:
- Open Command Prompt or PowerShell as an administrator.
- Type
DISM /Online /Cleanup-Image /RestoreHealthand hit Enter. - Wait for it to complete. This may also take some time.
After running both tools, restart your computer and check if the WDF Violation error persists.
5. Perform a Clean Boot
Software conflicts can often lead to the WDF Violation BSOD. Performing a clean boot helps you start Windows with minimal drivers and startup programs, making it easier to identify the culprit.
Steps to Perform a Clean Boot:
- Press
Windows + R, typemsconfig, and hit Enter. - In the System Configuration window, go to the Services tab.
- Check Hide all Microsoft services, then click Disable all.
- Now, go to the Startup tab and click Open Task Manager.
- Disable all startup items.
- Close Task Manager and go back to the System Configuration window. Click OK and restart your computer.
After the reboot, check if the error persists. If it doesn’t, re-enable services and startup items one by one to identify the conflicting software.
6. Check for Hardware Issues
If you’ve tried all the software fixes and are still encountering the WDF Violation error, you might want to consider that the problem could be hardware-related. Faulty hardware components such as RAM, hard drives, or graphics cards can cause system instability.
Steps to Check for Hardware Issues:
-
Run Windows Memory Diagnostic:
- Type
Windows Memory Diagnosticin the search bar and open it. - Select Restart now and check for problems. The system will reboot and check for memory issues.
- Type
-
Check Disk Utility:
- Open Command Prompt as an administrator.
- Type
chkdsk /f /r C:and press Enter (replaceC:with your system drive if different). - Allow the disk check to complete and follow prompts.
7. Uninstall Recently Installed Software
If the WDF Violation error began after installing new software, uninstalling that software could resolve the issue. Sometimes software incompatibility can cause conflicts that trigger BSOD errors.
Steps to Uninstall Software:
- Press
Windows + Ito open Settings. - Click on Apps.
- Scroll through the list and find the recently installed application.
- Click on the application and select Uninstall.
- Follow the prompts to remove the software, and then restart your computer.
8. Restore Windows to an Earlier Point
If the WDF Violation error started recently and you can’t seem to fix it, using System Restore might be a viable solution. System Restore allows you to roll back your computer to a previous state without affecting your personal files.
Steps to Restore Windows:
- Type
System Restorein the Windows search bar and select Create a restore point. - Click on the System Restore button.
- Follow the prompts to select a restore point before the issue began.
- Confirm the restoration and allow the system to reboot.
Conclusion
The WDF Violation BSOD error can be daunting, but by following these eight methods, you can effectively troubleshoot and resolve the issue on your Windows 10 or 11 system. Start with the easier and less technical methods, such as updating or rolling back drivers, and gradually move towards more complex solutions like checking hardware.
Regardless of the method you choose, always remember to back up your important data regularly to prevent loss in cases of unexpected crashes. Whether through driver updates, system scans, or even a system restore, taking these proactive measures can help you maintain a stable and efficient computing environment. If all else fails, consider reaching out to a professional for help, as persistent issues might require deeper diagnostic investigations.
Learn how to troubleshoot and resolve the frustrating WDF_VIOLATION blue screen error on your Windows 11 system, restoring stability and functionality to your PC.
Published
3 min read
The WDF_VIOLATION blue screen error can be a frustrating experience for Windows 11 users. This error, which has a value of 0x0000010D, indicates that the Kernel-Mode Driver Framework (KMDF) has detected an issue with a framework-based driver. While it may seem daunting, there are several effective methods to resolve this problem and get your system back up and running smoothly.
What Causes the WDF_VIOLATION Error?
The WDF_VIOLATION error is often triggered by faulty or outdated drivers, particularly the HP keyboard driver (HpqKbFiltr.sys) on certain HP computers. However, it can also be caused by corrupted system files, hardware issues, or conflicts with recently installed updates.
Method 1: Remove or Rename the Faulty HP Keyboard Driver
If you’re using an HP computer, the HpqKbFiltr.sys driver is likely the culprit behind the WDF_VIOLATION error. Here’s how to remove or rename this driver:
Step 1: Boot your computer into the Windows Recovery Environment (Windows RE). If your PC isn’t starting normally, restart it and press F11 repeatedly until you see the “Choose an option” screen.
Step 2: Select “Troubleshoot” > “Advanced options” > “Command Prompt”.
Step 3: In the Command Prompt, type the following command for 64-bit Windows and press Enter:
dism /Image:C:\ /Remove-Driver/Driver: c:\Windows\System32\driverstore\FileRepository\hpqkbfiltr.inf_amd64_714aca0508a80e9a\HpqKbFiltr.inf
For 32-bit Windows, use this command instead:
dism /Image:C\ /Remove-Driver /Driver: C:\Windows\System32\DriverStore\FileRepository\hpqkbfiltr.inf_x86_f1527018cecbb8c2\HpqKbFiltr.inf
Step 4: Exit the Command Prompt and restart your computer.
If you prefer to rename the driver instead of removing it, use these commands:
cd c:\windows\system32\drivers
ren HpqKbFiltr.sys HpqKbFiltr.sys_old
Method 2: Update Windows and Install Specific Patches
Microsoft has released patches to address the WDF_VIOLATION error, particularly for HP devices. Follow these steps to ensure your system is up-to-date:
Step 1: Open the Settings app by pressing Windows key + I.
Step 2: Navigate to “Windows Update” and click “Check for updates”.
Step 3: Install all available updates, including the KB4468304 patch if it’s listed.
Step 4: If KB4468304 isn’t available through Windows Update, you can download it manually from the Microsoft Update Catalog website.
Step 5: After installing the updates, restart your computer to apply the changes.
Method 3: Update or Roll Back Problematic Drivers
Outdated or corrupted drivers can cause the WDF_VIOLATION error. Here’s how to update or roll back drivers:
Step 1: Open Device Manager by right-clicking the Start button and selecting “Device Manager”.
Step 2: Expand the categories and look for devices with a yellow exclamation mark, which indicates a driver issue.
Step 3: Right-click on the problematic device and select “Update driver”. Choose “Search automatically for updated driver software”.
Step 4: If updating doesn’t solve the issue, right-click the device again and select “Properties”. Go to the “Driver” tab and click “Roll Back Driver” if available.
Step 5: Restart your computer after updating or rolling back drivers.
Method 4: Run Windows Memory Diagnostic Tool
Memory issues can sometimes cause blue screen errors. Use the Windows Memory Diagnostic tool to check for and repair memory problems:
Step 1: Press Windows key + R, type mdsched.exe, and press Enter.
Step 2: Choose “Restart now and check for problems”.
Step 3: Your computer will restart and run the memory diagnostic tool. This process may take several minutes.
Step 4: Once complete, your computer will restart automatically. Check for results by searching for “Event Viewer” in the Start menu, expanding “Windows Logs”, and clicking on “System”. Look for the “MemoryDiagnostics-Results” event to see if any issues were detected.
Method 5: Perform a System Restore
If the WDF_VIOLATION error started occurring after a recent change to your system, performing a System Restore can help:
Step 1: Press Windows key + R, type rstrui.exe, and press Enter.
Step 2: Click “Next” and choose a restore point from before the error started occurring.
Step 3: Follow the on-screen instructions to complete the System Restore process.
Step 4: After the restore is complete, check if the WDF_VIOLATION error persists.
By following these methods, you should be able to resolve the WDF_VIOLATION blue screen error on your Windows 11 system. Remember to always keep your system and drivers up-to-date to prevent similar issues in the future. If the problem persists after trying these solutions, consider seeking help from a professional technician or contacting Microsoft support for further assistance.