You may encounter an error with a code of 1603 when you are attempting to install something on your Windows. The error message is basically something like “Error: -1603 Fatal error during installation.” It usually occurs when you are using a Windows Installer package to install the program.
You can try the methods below that can be help you fix the error.
1) Change installation location
2) Completely uninstall the same program installed
3) Start and re-register Microsoft Installer service
4) Acquire full permissions on the drive for installation
1) Change installation location
You may encounter an error 1603 because the installation location is you choose is not available due to various reasons — such as being encrypted. You can use another installation folder to install the program and see if the error is gone.
2) Completely uninstall the same program installed
If you have previously installed the same program (or its earlier version), the error can occur when you try to install the application again. If you want to install your program successfully, you need to perform a clean uninstall of the one installed on your computer. This means you need to remove all the temporary files and preferences it leaves in addition to the major program.
Sometimes you may lose the desktop shortcut of a program due to some reasons and therefore you may forget that you have installed it. In this case you can go to Control Panel to check if it is still on your computer:
Press Win + R, and enter “control“;
Find and open Programs and Features;
Then you can check if the application is listed here. If it is, uninstall it.
3) Start and re-register Microsoft Installer service
There may be something going wrong with Microsoft Installer service and therefore resulting in error 1603. You can fix the problem by (re)starting and re-registering Microsoft Installer service.
To start Windows Installer service:
a) Press Win + R and enter “services.msc“;
b) Find and double click on Windows Installer;
c) Hit Start button under Service status and hit OK. (If its service status is running, you should click on Stop first and then hit Start.)
To re-register Windows Installer service:
a) Press Win + R, type “msiexec /unregister” and hit Enter.
b) Press Win + R again and enter “msiexec /regserver“.
4) Acquire full permissions on the drive for installation
It is possible that the error 1603 occurs because you don’t have full permissions on the file location. Try getting the permissions on the drive you are installing your application to and see if this fixes the problem.
a) Open File Explorer, right click on the drive containing the installation location and select Properties.
b) Go to Security tab and click on Edit.
c) Single click on SYSTEM and ensure that the Allow box of every item in Permissions for SYSTEM is checked (if it is checkable). Do the same check for Administrators.
d) Click on OK to go back to Properties dialog. Then click on Advanced.
e) Click on Change Permissions.
f) On Permissions tab, double click on Administrators.
g) Select This folder, subfolders and files for Applies to field and tick all the available basic permissions. After that hit OK.
h) Do the same operation above for SYSTEM.
i) Click on OK all the way out. Now you have acquired full permissions on this drive. Try installing your application and see if the issue is fixed.
94
94 people found this helpful
You may encounter the Installation Error 1603 when installing something on your operating system. This is a common error among Windows users.
This post will help you know why the Windows Installer error 1603 occurs and how to fix it.
Note: Don’t wait for your PC to encounter errors such as the Error Code 1603. You can keep your computer clean and functioning optimally using Outbye PC Repair tool. This tool will clean, optimize, and speed up your computer to give you a pleasant user experience.
Download PC Repair
Symptoms of the Installation Error 1603
A number of users report encountering the Error Code 1603 when they try to install something on their Windows OS. Most of them reported that it might have to do with the Windows Installer package. Meanwhile, other users said they met the error during the installation of Google Backup and Sync on Windows 10.
When the installation error 1603 occurs, it appears with a message displaying:
“Error 1603: A fatal error occurred during installation.”
Once the error occurs, if you click the OK message box, you’ll notice that the installation rolls back.
Why Does Installation Error 1603 Occur?
When the Error 1603 occurs, it mostly indicates that one of the common custom actions in the MSI failed. Here are the causes of the issue:
- When Windows Installer is trying to install a Windows application that already exists on your computer
- When the drive containing the destination folder of the Windows Installer package or any other application you’re installing is accessed as a substitute drive
- When the destination folder of the application (Windows Installer Package) you’re trying to install is encrypted
- When you don’t have the Full Control permissions of the System account or destination folder where you’re installing the Windows Installer package
- If the Windows Temp folders are full
Note: The causes of Installation Error 1603 mentioned in this list are not the only ones; they’re just the common ones reported by many users. There could be other reasons depending on your system or device.
How To Fix the Installation Error 1603
Use the following methods to fix the Windows installer error 1603:
Method #1: Change the Installation Location
In most cases, you may encounter the Error 1603 when the installation location is not available. This can happen because of various reasons, such as when it is encrypted or when temporary folders are full. You can switch the installation folder to a different location or disk and see if the Error 1603 is gone.
Method #2: Remove or Uninstall the Duplicate Program from Your Device
Do you have an earlier version of the program on your device? If so, then you’re likely to encounter error 1603 when installing the application again.
To install your program successfully, you may need to perform a clean uninstall. This process entails removing the program along with all the residual files and preferences that it may leave behind. To begin, follow the steps below:
- Right-click Windows start.
- Select Apps & Features.
- Check if the application is listed.
- If the application is listed, right-click on it and select uninstall.
Now you can try to install the application again and see if you’re still encountering the 1630 error.
Method #3: Start and Register the Microsoft Installer Service
Sometimes, the Microsoft Installer service could be experiencing an issue that is resulting in the Installation Error 1603. If there is a problem with the Microsoft installation service, you can fix it by (re)starting and re-registering it. Here’s how:
To start Microsoft installer service.
- Press Win + R Keys, then type
services.msc - In the Windows that pops up, locate Windows Installer.
- Double-click on the Windows Installer, then select Start under the Service status.
- Click OK.
- If the Windows installer service status is running, you’ll need to first click on Stop and then click Start.
To register Microsoft installer service:
- Press Win + R Keys. Then type
msiexec /unregisterand press Enter. - Again, Press Win + R Keys.
- Type
msiexec /regserver, then press Enter.
Now, check if you can install the application without encountering the Error 1603.
Method #4: Obtain Full Installation Permission on the Drive
It is possible that you’re encountering the Error 1603 because you don’t have the required full installation permissions on the destination file location. To fix this, you need to get the installation permissions on the application’s destination drive.
- Press Win + E Keys to open File Explorer.
- In File Explorer, right-click on the drive that has the installation location, then select Properties.
- Go to the Security tab, then click Edit.
- Click on SYSTEM.
- In the Permissions for SYSTEM, check and ensure that every box on the column of Allow is checked (if the box is checkable).
- Now, click Administrators and repeat Step 5.
- Next, click on OK, then go back to the Properties dialog and click Advanced.
- Now, click Change Permissions.
- On the Permissions tab, double-click on Administrators.
- Locate the “Applies to” field and select This Folder, Subfolders, and Files.
- In the Basic permissions, check all the boxes > then click OK.
- Now, click SYSTEM and do the same as you’ve done in Steps 10 and 11.
- Click OK until you return to File Explorer.
Now, you’ve obtained full permissions on the drive you needed to conduct the installation on. You can then try installing the application and see if you’re still encountering the Error 1603.
Setting up full permissions is a good move to solve error 0xc0000022. In case you face the error code 0x80070005 it is vital to give full control to a certain folder.
Method #5: Install the Package into a Drive that Is not Accessed as a Substitute Drive
Does the error message tell you that the you’re trying to install the Installer package in a substitute drive? If so, try installing it to a different drive. Otherwise, use other methods to fix the error.
Provide feedback
Saved searches
Use saved searches to filter your results more quickly
Sign up
Доброго времени всем присутствующим!
Господа, возникла проблема с установкой KES 10.3.0.6294 на компьютер после обновления системы с Win 7 Pro (х64) до Win 10 Корпоративная.
Последовательность действий было следующая:
Перед обновлением были удалены агент админ-яя и собственно KES. Также сделал очистку реестра прогой Wise Registry Cleaner 8.
Проведено обновление системы.
Установлен агент админ-я (NetAgent_10.5.1781).
Попытка установки KES 10.3.0.6294. И вот на этом все, сам KES устанавливаться не желает ни в какую. Ошибка:
«Установщик Windows выполнил установку продукта. Продукт: Kaspersky Endpoint Security 10 для Windows. Версия: 10.3.0.6294. Язык: 1049. Изготовитель: «Лаборатория Касперского». Установка завершена с состоянием: 1603.»
Чего я только не делал, чистил реестр тем же клеанером, чистил вручную, чистил временную папку и папку Temp, чистил диск С, сбросил разрешения файлов на диске С на дефолтные — эффекта нет, ошибка все та же.
В последнюю попытку включил логи установщика, он их создал, но там несколько десятков мегабайт и чего там искать я не знаю(
Помогите, если не трудно и знаете как, переустанавливать систему из-за одного антивируса никакого желания нет.
Заранее спасибо!
When you try to install a Microsoft Windows Installer package, you may receive the following error message: Error 1603: A fatal error occurred during installation. If you click OK in the message box, the installation rolls back.
Table of Contents
You may receive this error message if any one of the following conditions is true:
1. The folder that you are trying to install the Windows Installer package is encrypted.
2. The drive that contains the folder that you are trying to install the Windows Installer package is accessed as a substitute drive.
3. The SYSTEM account does not have Full Control permissions on the folder that you are trying to install the Windows Installer package too. You notice the Star Citizen Installer error message because the Windows Installer service uses the SYSTEM account to install the software. Read How to Install Software Without Admin Rights here.. Read How to Install Software Without Admin Rights here..
Fix Error 1603: A fatal error occurred during installation
For automatically fixing this issue use the fix it tool by Microsoft’s.
Now if the above didn’t work out for you then follow this guide:
1)Double click “This PC” on your desktop.
2)Right-click the drive where you want to install the program and Choose “Properties.“
3)Click the “Security” tab and then click the “Edit” button.
4)Check “Allow” next to “Full Control” under the subheading “Permissions” inside the user name “SYSTEM” and click “Apply” then “OK.”
5)If you can’t find “SYSTEM” there, then click “Add” and under object name write”SYSTEM” click “OK” and repeat the step 4.
6)Now go back to the Security tab and click on “Advanced.“
7)Check “Replace permission entries on all child objects with entries shown here that apply to child objects.” Click “OK.” Check “Reset permissions on all child objects and enable propagation of inheritable permissions” if you use other versions of Windows. Click “OK.”
8)Click “Yes” when prompted.
9)Double-click the installer package and you will no longer have any issues with it.
Method 2: Install Ownership Registry Hack
1.Download and unzip the files.
2.Double-click the InstallTakeOwnership.reg file.
3.Right-click the on the file which is giving the Error 1603 and select take Ownership.
4.Again try to install the installer package and the issue is successfully fixed.
5.If for some reason you want to delete the Install Ownership shortcut, just double click RemoveTakeOwnership.reg file.
Method 3: Restart the Windows Installer Service
1.Press Windows Key + R then type services.msc and hit Enter.
2.Find Windows Installer service then right-click on it and select Properties.
3.Click on Start if the service is not already running.
4.If the service is already running then right-click and select Restart.
5.Again try to install the program which was giving access denied error.
Method 4: Re-register Windows Installer
1.Press Windows Key + X then select Command Prompt (Admin).
2.Type the following command into cmd and hit Enter after each one:
%windir%\system32\msiexec.exe /unregister %windir%\system32\msiexec.exe /regserver %windir%\syswow64\msiexec.exe /unregister %windir%\syswow64\msiexec.exe /regserver
3.Reboot your PC to save changes.
4.If the issue is not resolved then press Windows key + R then type the following and hit Enter:
%windir%\system32
5.Locate the Msiexec.exe file then note down the exact address of the file which would be something like this:
C:\WINDOWS\system32\Msiexec.exe
6.Press Windows Key + R then type regedit and hit Enter to open Registry Editor.
7.Navigate to the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSIServer
8.Select MSIServer then in the right window pane double-click on ImagePath.
9.Now type the location of the Msiexec.exe file which you noted above in the value data field followed by “/V” and the whole thing would look like:
C:\WINDOWS\system32\Msiexec.exe /V
10.Boot your PC into safe mode using any of the methods listed here.
11.Press Windows Key + X then select Command Prompt (Admin).
12.Type the following command and hit Enter:
msiexec /regserver
%windir%\Syswow64\Msiexec /regserver
13.Close everything and boot your PC normally.
Recommended for you:
- How to fix BOOTMGR is missing Windows 10
- Fix Driver Power State Failure Windows 10
- Fix We couldn’t complete the updates, Undoing changes
- How to fix Automatic Repair couldn’t repair your PC
That’s it you have successfully fix Error 1603: A fatal error occurred during installation but if you still have any questions you can ask them in the comments section.