Uefi bios utility ez mode как выйти на рабочий стол windows 10

If your PC is stuck in BIOS utility EZ mode and you can’t move forward from the BIOS screen, you simply can’t do anything else with your system since you have to move from there to start your computer.

The BIOS helps you boot up your computer, so if you’re having a problem and stuck on its screen, you need help fast.

The BIOS is an important part of all motherboards as it allows users to troubleshoot their computers. As an acronym, it stands for Basic Input Output System.

This article will show you how to solve this problem, so pay close attention.

What to do if the PC is stuck on the BIOS screen
Recover data when PC is stuck on BIOS screen

Going straight to the gist of this article, learn what to do if your PC gets stuck at the BIOS screen:

Restore default BIOS settings

First, you need to access the BIOS settings before resetting them. Follow the steps below to do this:

Start your computer, and while it is still loading, continuously press the key that will take you to the BIOS.

On the screen, you can get tips on the exact key to press, which is mostly “F2”, although it’s “DEL” for some laptops. Whichever is, your computer will load the BIOS settings when you press the correct key enough times.

Now that you’re in, launch the “Load Default Options” prompt by pressing the F9 key and pressing “Yes” to ensure that the default settings are set in the BIOS. BIOS resetting can also be accomplished under “security” settings.

Although the menu options are different for different motherboards, an option will always be listed to reset the BIOS.

Click to “Save” > “Exit”

Clear the CMOS (BIOS)

All the default settings are usually relived once the BIOS is cleared. The steps to do this are outlined below:

Turn off any devices that are externally connected to your computer
Disconnect the computer system’s power cable from its mains power source
Remove the computer case cover
Locate the CMOS battery on the motherboard. You can find the battery in a vertical/horizontal battery mount on the motherboard. Alternatively, you can see it connected via a cable to an installed integrated header.

Now, remove the battery and if it’s in a holder, make a note of its – and + orientation. Take your time removing the battery from whatever connects it. If a cable connects it, unplug the cable.

Wait one minute to five minutes before reinserting the battery into the motherboard.
Cover the computer with its case again
Reconnect all peripheral devices that you initially disconnected from the computer
Turn on your PC

Confirm the order of your boot by using UEFI boot

Newer versions of computer systems have replaced BIOS with UEFI. UEFI stands for Unified Extensible Firmware Interface. This replacement is because UEFI is faster than BIOS and its security features are better enhanced than BIOS.

So it makes sense that one of the ways you can fix a PC stuck at the BIOS screen is to use UEFI to check your boot order.

Now to do this, go to the BIOS as shown in solution (1) above, then do the following:

Scroll to the “Boot” section and tap to enable the “UEFI Boot” option
Check your boot order. Set your SSD or hard drive as the device that will boot first. Then press “Enter”

Now restart your computer

Repair your computer with the help of Windows 10 bootable media

To use a bootable installation USB or DVD media to repair or boot your computer, follow the steps below and perform advanced troubleshooting:

Step 1: Acquiring or Downloading an ideal ISO window:

Buying or downloading an ideal ISO window 11/10 is pertinent as it should be in line with the version currently in use by the PC. Download the same ISO version of Windows installed on your PC.

Note that this is not required but can be useful when you need to do a fresh install of Windows. The ISO file for your version of Windows helps store all the setup files you might need for this new Windows installation.

Step 2: Create the bootable USB or DVD drive

Use any of the tools available online to create a bootable USB stick. You can also create a repair bootable USB on a working computer by following these steps:

Connect the USB drive to the working computer; Check that it is detected.
Type “Recovery drive” and search. On the result, select “Create a recovery drive”
Check the box next to the “Back up system files to the recovery drive” instruction. Go to the next window.
Choose a USB flash drive and select “Next” again
Start the operation by selecting “Create”
Boot into your PC’s UEFI or BIOS and arrange the boot order so that the USB comes first, then the hard drive.

Step 3: Boot from bootable media and repair your computer

Boot your computer from the bootable media you created. A Windows 10 installation process will begin, but do not click “Next” to continue, as this will only terminate the installation of another Windows operating system.

Instead, you need to go to the bottom of the screen and choose “Repair your computer” to proceed to the Advanced Recovery itself.

Step 4: Troubleshoot it using advanced recovery

Click the “Advanced Options” button.
Move to click “Troubleshoot”
Select “Startup Repair” from the list of options in the “Advanced Options” window. A set of instructions will guide you to solve the problems that prevent you from starting your computer; make sure you follow them.
Next, a screen will appear with the name of your administrator account.
Click on this account and verify that the account is yours by entering the password associated with your email.
Once this is done, your computer will go through diagnostics, and any boot-related issues will be resolved.
You can now reboot your computer, knowing that it will work properly and not get stuck at the BIOS screen.

Ensure data Recovery if the BIOS screen is stuck

When your PC gets stuck on the BIOS screen, and you urgently need some important system data, there is a way to access it; refer to Recoverit Data Recovery software.

You can harness this tool in recovering data from crashed, formatted or damaged systems. This can be your SD cards, drives, internal hard drives, or any other file storage system.

You don’t need special training to be able to use this tool.

So, follow the steps below and recover data from your PC if it is stuck on the BIOS screen:

Step 1 – Create a bootable media

To start, you need another computer that works well. While it’s still working, identify the USB/DVD/CD that worked for you in solution (4) mentioned earlier and plug it into the computer.

Create a bootable media to help you gain access to your drive so that Recoverit can help you recover your data.

Once the CD/DVD or USB is connected, download and install Recoverit Data Recovery. Select the “Broken Computer Recovery” option under the “Advanced Recovery” tab, then select “Start”.

The next window is where you can create the bootable media. Select any USB/CD/DVD and hit “click” on the screen. There would be a prompt for you to format it if you selected the USB option.

Click “Format” > “Create“.

Recoverit will download the necessary firmware to create the bootable media in the next window. It will accomplish the formatting of your PC drive, after which it will create bootable Media.

Once this is complete, you will be notified, and your next action is the ejection or unplugging of a USB/ DVD/CD.

Step 2 – Start the computer with bootable media

Go to the BIOS setup of the computer stuck on the BIOS screen. The computer has to switch on from the drive – USB/CD/DVD; so give your computer the needed push by changing the boot order.

Reboot your faulty computer; now you can get access. Also, connect an external drive that you can use as storage for the data you are about to recover.

Step 3 – Select recovery mode

You will be presented with two recovery mode options: “Data Recovery” and “Hard Drive Copy“. Choose “Data Recovery” mode.

Navigate to the Drive where the files were kept initially; identify and click on the files. Once you choose “Start“, Recoverit will scan the drive and recover all your files.

Step 4 – Recover and save

You can preview your files even while they are being recovered, one after another. Once the scan is finished and all your data is recovered, select the external drive you connected in step (2) above as the location where you want to save your files.

Select “Recover” and the recovered data will be saved to the drive.

Conclusion

You can no longer get stuck on the BIOS screen when you boot up your computer because now you know what to do if you face such a situation.

All the steps that have been described are practical and easy to follow.

Don’t forget to use Recoverit Data Recovery professional if you are in a hurry to use data from a PC stuck on the BIOS screen.

Learn more

Patrick Johnson is a tech enthusiast & blogger; currently living in Florida, United States. He loves to write about Laptop Tips, Guides, configurations, features, and Accessories. Quora is where you will also find him. No matter what questions you have in your mind regarding the laptop, he may already have the answer.

Источник

Exiting the ASUS BIOS Utility EZ Mode on a Windows 11 device is a straightforward task that involves navigating through the BIOS interface using either your keyboard or mouse. Once inside the BIOS, you can quickly exit by locating the ‘Exit’ option, often found at the top of the screen or within a menu. Saving any changes you might have made is crucial, and typically, this involves selecting ‘Save & Exit’ or simply ‘Exit.’ This brief guide will walk you through these steps to ensure a smooth exit from the BIOS Utility.

Exiting the ASUS BIOS Utility EZ Mode is essential when you’re done making changes to your system’s settings. Here’s a step-by-step guide to help you get out of the BIOS and into Windows 11.

Step 1: Access the BIOS

Press the power button to turn on your device, then repeatedly press the ‘F2’ key (or ‘DEL’ key, depending on your model) to enter BIOS.

Entering the BIOS allows you to manage hardware settings and configurations, which is essential for optimizing your computer’s performance.

Step 2: Navigate to the Exit Menu

Once inside the EZ Mode, look for the ‘Exit’ menu option, typically located at the top or bottom of the screen.

The Exit menu contains options to save your changes or continue without saving, providing flexibility based on your needs.

Step 3: Select ‘Save & Exit’

In the Exit menu, choose ‘Save & Exit’ if you’ve made any changes you want to keep. Otherwise, just select ‘Exit.’

Saving your changes ensures that any adjustments to the system settings are applied.

Step 4: Confirm Your Selection

When prompted, confirm that you wish to save changes and exit, or simply exit without saving.

Confirmation prevents accidental changes that might affect your system’s performance negatively.

Step 5: Reboot into Windows 11

After exiting, your computer will reboot, bringing you back to Windows 11.

This allows you to seamlessly transition back to your everyday tasks on Windows 11.

Once you’ve completed these steps, your computer will restart and boot into Windows 11. Any changes made during your time in the BIOS will take effect, ensuring your system runs with the new configurations or settings you adjusted.

Tips for Exiting ASUS BIOS Utility EZ Mode

Ensure you only make necessary changes to avoid unintended system behavior.
Take note of the original settings before making changes so you can revert if needed.
Use the arrow keys for precise navigation if you’re unsure about using the mouse.
Always save your changes if you’re adjusting system settings for new hardware.
Familiarize yourself with keyboard shortcuts within the BIOS for quicker navigation.

Frequently Asked Questions

What is ASUS BIOS Utility EZ Mode?

ASUS BIOS Utility EZ Mode is a simplified interface for modifying BIOS settings, designed for users who prefer an easier navigation experience.

How do I enter ASUS BIOS Utility EZ Mode?

To enter, reboot your computer and press ‘F2’ or ‘DEL’ repeatedly as the system starts up.

What should I do if my changes don’t save?

Double-check that you’re selecting ‘Save & Exit’ and confirm your choice when prompted.

Can I exit BIOS without saving changes?

Yes, you can exit without saving changes by selecting the ‘Exit’ option and choosing not to save when prompted.

Is it possible to reset BIOS settings to default?

Yes, most BIOS interfaces offer an option to ‘Load Default Settings’ which can be found in the exit menu.

Summary

Access the BIOS with the ‘F2’ or ‘DEL’ key.
Navigate to the Exit menu.
Select ‘Save & Exit’ or ‘Exit.’
Confirm your selection.
Reboot into Windows 11.

Conclusion

Navigating through the ASUS BIOS Utility EZ Mode on Windows 11 is like finding your way through an old, familiar neighborhood. You may have to take a few turns, but with the right directions, you’ll be back on the main road in no time. Whether you’re tweaking your system’s settings or just exploring what options are available, knowing how to exit without a hitch is crucial. It’s akin to closing a book after a good read, ensuring that the bookmark is placed right where you left off. Your journey through BIOS can influence your device’s performance significantly, so handle those settings with care.

For those of you eager to dive deeper, consider exploring advanced BIOS settings or learning about overclocking. Just remember, like any great adventure, preparation is key. Keep this guide handy for a smooth exit every time you enter the ASUS BIOS Utility EZ Mode, and enjoy the seamless transition back to your Windows 11 experience.

Matthew Burleigh has been writing tech tutorials since 2008. His writing has appeared on dozens of different websites and been read over 50 million times.

After receiving his Bachelor’s and Master’s degrees in Computer Science he spent several years working in IT management for small businesses. However, he now works full time writing content online and creating websites.

His main writing topics include iPhones, Microsoft Office, Google Apps, Android, and Photoshop, but he has also written about many other tech topics as well.

Read his full bio here.

Источник

Ну, раз вы вызвали меня, отвечу, как сам бы стал решать такую проблему.
Во-первых, найдётся ли поблизости ремонтно-восстановительная загрузочная флэшка LiveUSB? Хорошо бы, чтоб нашлась, это резко облегчит последующую работу. Годится также ремонтно-восстановительный диск LiveDVD, но тогда надо к нему добыть дисковод на USB-хвостике. Подключаете, обнаруживаете в BIOS в списке Boot priority новое устройство, и запускаетесь с него. После старта ремонтной операционной системы Windows PE можно делать некоторые ремонтные действия, и первым делом посмотреть встроенный HDD через обычный Проводник. Если содержимое диска наблюдается (читается и пишется) и выглядит как обычно, то делаем вывод — слетел загрузчик.Чтобы его восстановить, надо запустить утилиту BootICE или другую подобную (на ремонтных дисках они обычно есть).
Если диск в Проводнике не виден, тогда начинается во-вторых: с помощью тестовых утилит (и особенно Виктории) надо разобраться, что случилось с диском. Если слетела файловая система или разметка на разделы, то это тоже можно восстановить с использованием спец. утилит. Если это не получилось, то на крайняк можно попробовать чем-то наподобие программы Recuva вытащить пользовательские данные. Но это без гарантии успеха.

Источник

Exiting the ASUS BIOS Utility EZ Mode in Windows 11 is a straightforward process. Simply navigate to the «Exit» tab using the arrow keys and select the appropriate option to save or discard changes. This guide provides a detailed step-by-step tutorial to ensure you can exit the BIOS without any issues.

Exiting the ASUS BIOS Utility EZ Mode ensures you save configurations and return to your normal boot sequence. Follow these steps to smoothly exit the BIOS utility.

Step 1: Access the Exit Tab

Use the arrow keys to navigate to the «Exit» tab.

The Exit tab is typically located at the top-right corner of the BIOS utility interface. You’ll find it listed alongside other tabs like Main, Advanced, and Boot.

Step 2: Choose Exit Option

Select the appropriate exit option from the list.

You’ll see several options like «Exit & Save Changes,» «Exit & Discard Changes,» and «Load Setup Defaults.» Depending on whether you want to save the changes you’ve made, choose the corresponding option.

Step 3: Confirm the Action

Press Enter to confirm your selected exit option.

After selecting your desired exit option, you’ll be prompted to confirm the action. Pressing Enter will finalize your choice and begin the process of exiting the BIOS utility.

Step 4: Reboot the System

Wait for your system to reboot and load Windows 11.

Once you’ve exited the BIOS, your computer will restart automatically. It will then proceed to load your operating system, and you should see the Windows 11 loading screen.

After completing these steps, your computer will restart and boot into Windows 11, reflecting any changes you saved in the BIOS.

Tips for How to Exit ASUS BIOS Utility EZ Mode Windows 11

Always double-check your changes before saving to avoid any unintended system behavior.
Use the «Exit & Discard Changes» option if you’re unsure about the changes you’ve made.
The «Load Setup Defaults» option can be a lifesaver if your system isn’t behaving correctly after making changes.
Keep a copy of your current BIOS settings, just in case you need to revert.
If you’re not confident, consult the user manual or seek professional help.

Frequently Asked Questions

What is the ASUS BIOS Utility EZ Mode?

The ASUS BIOS Utility EZ Mode is a simplified interface for configuring system settings, designed to make changes easier for less experienced users.

Can I exit the ASUS BIOS without saving changes?

Yes, you can choose the «Exit & Discard Changes» option to exit without saving any modifications.

How do I know if my changes were saved?

Your changes are saved if you selected «Exit & Save Changes» and confirmed the action. The system will use these settings upon reboot.

What happens if I load default settings?

Loading default settings will revert the BIOS to its original configuration, which can resolve issues caused by incorrect settings.

Is it safe to change BIOS settings?

While changing BIOS settings can improve performance and compatibility, incorrect settings can lead to system instability. Always proceed with caution.

Summary

Use the arrow keys to navigate to the «Exit» tab.
Select the appropriate exit option.
Press Enter to confirm the action.
Wait for the system to reboot and load Windows 11.

Conclusion

Exiting the ASUS BIOS Utility EZ Mode in Windows 11 is a vital skill for anyone looking to tweak their system settings. Whether you’re saving changes or simply exiting without making any adjustments, this guide ensures you’re well-equipped to handle the process. Always remember to double-check your settings before saving and exiting to avoid any unintended changes. If you’re new to BIOS configuration, it’s worthwhile to familiarize yourself with the options available and their implications on your system’s performance.

For further reading, you might want to explore ASUS’s official documentation or community forums for more advanced BIOS settings and troubleshooting tips. If you ever find yourself stuck, don’t hesitate to seek professional help to ensure your system remains in optimal condition.

Now that you know how to exit the ASUS BIOS Utility EZ Mode in Windows 11, you’re one step closer to mastering your computer’s configuration. So go ahead, dive in, and take control of your system!

Matt Jacobs has been working as an IT consultant for small businesses since receiving his Master’s degree in 2003. While he still does some consulting work, his primary focus now is on creating technology support content for SupportYourTech.com.

His work can be found on many websites and focuses on topics such as Microsoft Office, Apple devices, Android devices, Photoshop, and more.

Источник

Try the following and see if it resolves the problem: In the Aptio Setup Utility, select the “boot” menu and then select “Launch CSM” and change it to “enable”. Next select the “Security” menu and then select “secure Boot Control” and change to “disable”. Now select “Save & Exit” and press “yes”.

Press the F10 key to exit the BIOS setup utility.

How do I get out of UEFI mode?

How do I disable UEFI Secure Boot? Hold down the Shift key and click Restart. Click Troubleshoot → Advanced options → Start-up Settings → Restart. Tap the F10 key repeatedly (BIOS setup), before the “Startup Menu” opens. Go to Boot Manager and disable the option Secure Boot.

How do I fix a stuck ASUS BIOS?

Unplug power and remove battery, press and hold power button for 30 seconds to release all power from circuitry, plug back in and power up to see if any change.

How do I fix UEFI BIOS utility EZ mode?

How do I boot to Safe Mode in UEFI BIOS?

You can use start menu -> run -> MSCONFIG . Then, under the boot tab there is a checkbox which when checked, will reboot into safe mode on next reboot.

How do I get rid of UEFI BIOS utility EZ mode?

How do I get out of UEFI BIOS utility EZ mode? In the Aptio Setup Utility, select the “boot” menu and then select “Launch CSM” and change it to “enable”. Next select the “Security” menu and then select “secure Boot Control” and change to “disable”. Now select “Save & Exit” and press “yes”.

How do I get out of BIOS loop?

Unplug power cable from PSU. Press the power button for 20 seconds. Remove the CMOS battery and wait 5 minutes and insert CMOS battery back. Make sure to connect only the disk where Windows was installedif you installed Windows while having only one disk on your PC.

How do you get past a BIOS screen?

Disconnect all the peripherals; hard drives, sound card, cd drive, etc boot it off just the CPU, fans and one memory stick. If it boots and lets you into the BIOS, then shut down and add one component at a time until you find the culprit. if it still does not let you in the BIOS, try resetting it.

How do I get into ASUS UEFI BIOS utility?

Press and hold the F2 button , then click the power button. DO NOT RELEASE the F2 button until the BIOS screen display.

What is UEFI mode?

The Unified Extensible Firmware Interface (UEFI) is a publicly available specification that defines a software interface between an operating system and platform firmware. UEFI can support remote diagnostics and repair of computers, even with no operating system installed.

How do I enable UEFI on ASUS BIOS?

ASUS UEFI BIOS Utility Go into the Advanced Mode (F7 or any other key as specified). Go into ‘Secure Boot’ option under the Boot section. ASUS UEFI BIOS Utility – Boot settings Ensure the proper OS Type is selected, and go into Key Management. Select ‘Save Secure Boot Keys’ and press enter.

How do I disable BIOS at startup?

Access the BIOS utility. Go to Advanced settings, and choose the Boot settings. Disable Fast Boot, save changes and restart your PC. Set your HDD as the primary booting device and confirm changes.

How do I change BIOS settings?

How to Configure the BIOS Using the BIOS Setup Utility Enter the BIOS Setup Utility by pressing the F2 key while the system is performing the power-on self-test (POST). Use the following keyboard keys to navigate the BIOS Setup Utility: Navigate to the item to be modified. Press Enter to select the item.

Why can’t I exit BIOS?

If you can’t exit BIOS on your PC, the issue is most likely caused by your BIOS settings. Enter BIOS, go to Security Options and disable Secure Boot. Now save changes and restart your PC. Enter BIOS again and this time go to Boot section.

What is ASUS UEFI BIOS utility?

The new ASUS UEFI BIOS is a Unified Extensible Interface that complies with UEFI architecture, offering a user-friendly interface that goes beyond the traditional keyboard- only BIOS controls to enable a more flexible and convenient mouse input.

What is a BIOS utility?

The BIOS Setup utility reports system information and can be used to configure the server BIOS settings. BIOS has a Setup utility stored in the BIOS flash memory. The configured data is provided with context-sensitive Help and is stored in the system’s battery-backed CMOS RAM.

How do I force my computer to start in Safe Mode?

Press Windows key + R (force Windows to start into safe mode every time you reboot the PC) Press the Windows Key + R. Type msconfig in the dialog box. Select the Boot tab. Select the Safe Boot option and click Apply. Choose Restart to apply the changes when the System Configuration window pops up.

How do you boot Windows 10 into safe mode?

From Settings Press Windows logo key + I on your keyboard to open Settings. Select Update & Security > Recovery . Under Advanced startup, select Restart now. After your PC restarts to the Choose an option screen, select Troubleshoot > Advanced options > Startup Settings > Restart.

How do I boot Windows 10 into safe mode?

Boot Windows 10 in Safe Mode: Click on Power button. You can do this on the loginscreen as well as in Windows. Hold Shift and click Restart. Click on Troubleshoot. Select Advanced Options. Select Startup Settings and click Restart. Choose 5 – Boot into safe mode with Networking. Windows 10 is now booted in Safe mode.

How do I get out of BIOS without saving changes?

On confirming, you save changes to the BIOS settings, save the settings to CMOS, and restart the system. Select this option to quit BIOS setup without making any permanent changes to the system configuration and reboot the computer.

How do I enable UEFI in Windows 10?

It’s assumed that you know what you’re doing. Open Settings. Click on Update & Security. Click on Recovery. Under the “Advanced startup” section, click the Restart now button. Source: Windows Central. Click on Troubleshoot. Click on Advanced options. Click the UEFI Firmware settings option. Click the Restart button.

What is EZ mode?

EZ Mode is used when you wish to connect your device directly to your wi-fi network / router. Connecting your device to your wi-fi router using AP Mode: In this mode, the device you are connecting adds and access point to your mobile.

Источник