Downloads
US-200
USB Audio/MIDI Interface (2 in / 4 out)
This product is dicontinued.
Manuals and specifications
Others
Supported Operating Systems
| Date | Language | Size | ||
|---|---|---|---|---|
Supported Operating Systems
|
07.03.2025 |
System Software / Firmware
Drivers
© 2003–2025 TEAC Europe GmbH · TEAC Corporation · All rights reserved.
Portable 2-in/4-out Audio/MIDI Interface
This model has been discontinued.
It has been replaced with the US-2×2.
TASCAM’s US-200 is a 2-in/4-out USB 2.0 Audio/MIDI Interface for Mac and Windows computers, housed in a lightweight, portable chassis. Audio can be recorded at up to 96kHz/24-bit resolution. Two high-quality XLR microphone inputs provide phantom power for condenser microphones. Four unbalanced RCA outputs are available on the rear panel, as well as a MIDI input and output for synths and drum machines.
A direct monitoring path is available on the US-200, for monitoring without the delay of going through computer software. The US-200 is buss-powered, meaning no additional power supply is required.
A copy of Cubase LE5 is included – the latest version of Steinberg’s 48-track workstation software. VST plug-in support, automated mixing and MIDI tracks allow you to craft large productions without adding any other software. If you want to use your own software, the US-200 supports most Mac and Windows software such as Logic Pro, Live, Nuendo, Digital Performer, Fruity Loops, and Pro Tools 9.
Whether you’re just starting out or simply need a great-sounding portable interface, check out the TASCAM US-200.
Spec description
| US-600 | US-200 | |
| Supported sampling frequency | 44.1/48/88.2/96kHz | |
| Supported bit rate | 24bit | |
| Analog audio Inputs | ||
| MIC IN | INPUT 1-4 | INPUT 1-2 |
| Connecter | XLR-3-31(1:GND, 2:HOT, 3:COLD), BALANCED | |
| Input impedance | 2.2k ohms | |
| Nominal input level | -14dBu(0.15Vrms) | |
| Minimum input level | -57dBu(0.001Vrms) | |
| Maximum input level | +2dBu(0.98Vrms) | |
| LINE IN | INPUT 1-4 | INPUT 1-2 |
| Connecter | 6.3mm(1/4″) TRS-jack(T:HOT, R:COLD, S:GND), BALANCED | |
| Input impedance | 15k ohms | |
| Nominal input level | +4dBu(1.23Vrms) | |
| Minimum input level | -39dBu(0.008Vrms) | |
| Maximum input level | +20dBu(7.75Vrms) | |
| INSTRUMENT IN | INPUT 1 | |
| Connecter | 6.3mm(1/4″) TS-jack(T:HOT, S:GND), UNBALANCED | |
| Input impedance | 1M ohms | |
| Nominal input level | -13dBV(0.22Vrms) | |
| Minimum input level | -56dBV(0.001Vrms) | |
| Maximum input level | +3dBV(1.41Vrms) | |
| Digital audio inputs | ||
| COAXIAL | INPUT 5-6 | — |
| Connecter | RCA pin-jack | — |
| Format | IEC60958-3(S/P DIF) | — |
| Analog audio outputs | ||
| LINE OUT | OUTPUT 1-2 | OUTPUT 1-4 |
| Connecter | RCA pin-jack, UNBALANCED | |
| Output impedance | 200ohms | |
| Nominal output level | -10dBV(0.316Vrms) | |
| Maximum output level | +6dBV(2Vrms) | |
| Digital audio inputs | ||
| COAXIAL | OUTPUT 3-4 | — |
| Connecter | RCA pin-jack | — |
| Format | IEC60958-3(S/P DIF) and IEC60958-4(AES/EBU) *Selectable in the Control Panel betwiin |
— |
| PHONES | ||
| Connecter | 6.3mm(1/4″) stereo phone jack | |
| Maximum output level | 18mW+18mW(32ohms loaded) | |
| MIDI | ||
| MIDI IN | DIN 5-pin | |
| MIDI OUT | DIN 5-pin | |
| USB | ||
| Connecter | USB B type 4-pin | |
| Format | USB 2.0 HIGH SPEED | |
| Power | USB bus powered (5V, Max 500mA) | 100V to 240V, 50/60Hz, Dedicated AC adapter (TASCAM PS-P520, included) |
| Power consumption | 2.5W | 5.0W |
| Dimensions | 172(W)×44(H)×164.3(D)mm | 221.5(W)×44(H)×164.3(D)mm |
| Weight | 480g | 580g |
| Bundle software | Cubase LE | |
| Accessories | CD-ROM (containing drivers), USB Cable, DVD-ROM (Cubase LE), Cubase LE Quick Start Guide, Warranty card, Owner’s manual | AC adaptor(TASCAM PS-P520), Power cord for AC adaptor, CD-ROM (containing drivers), USB Cable, DVD-ROM (Cubase LE), Cubase LE Quick Start Guide, Warranty card, Owner’s manual |
| Audio performance | |
| Frequency response | 20Hz to 20kHz, +0.5/-1.0dB(44.1/48KHz, JEITA) 20Hz to 40kHz, +0.5/-1.5dB(88.2/96KHz, JEITA) |
| S/N ratio | 98dB or more(LINE IN to LINE OUT with Gain knobs at minimum, 44.1kHz, JEITA) |
| THD | 0.0045% or less(LINE IN to LINE OUT with Gain knobs at minimum, 44.1kHz, JEITA) |
| Operating system requirements | |
| Windows | |
| OS | Windows XP:32bit SP3 or more, 64bit SP2 or more Windows Vista:32bit SP2 or more, 64bit SP2 or more Windows 7:32bit, 64bit Windows 8:32bit, 64bit |
| CPU | Pentium 4 1.4GHz or more, ADM Athlon 1.4GHz or more |
| Memory | 1GB or more |
| Driver | ASIO 2, WDM(MME) |
| Macintosh | |
| OS | Mac OS X Tiger(10.4.11), Mac OS X Leopard(10.5.6), Mac OS X Snow Leopard(10.6.8), OS X Lion(V10.7), OS X Mountain Lion(V10.8) |
| CPU | Intel Processor 1GHz or more, Power PC G4 1GHz or more |
| Memory | 1GB or mor |
| Driver | Core Audio, Core MIDI |
Manuals
Documents
Firmware
Windows Drivers
Mac Drivers
FAQs
In case that 24 bit is being selected at the setting of «Select the sample rate and bit depth to be used when running in shared mode» on Windows, PC is re-booted up when system sound on Windows is played.
Please check here for how to avoid it.
Cubase LE is authorized on the Steinberg website. Go to this page to get started.
According to Apple, OS X 10.9.5 includes heightened security measures that will also be part of OS X 10.10. These security measures will affect some TASCAM audio interfaces, so users are advised to be aware, and hold off on updating until further information is available
These products use Apple’s built in CoreAudio driver. The Settings Panel installer is fully compliant with Apple’s latest security measures.
- US-2×2
- US-4×4
The latest drivers are compliant, but testing is ongoing for these products:
- US-322
- US-366
- US-1200
- UH-7000
The OS X 10.9 public beta drivers can continue to be used for these interfaces:
- US-122mkII
- US-144mkII
- US-200
- US-600
- US-1641
- US-1800
- US-2000
Cannot be used with the current driver (public or beta):
- IF-FW/DMmkII: Development is on-going and a version that is compliant with the new security measures will be made available as soon as possible. Please keep your system at 10.9.4 or earlier if you wish to continue to use the IF-FW/DMmkII.
- TASCAM Mixer Companion: Gatekeeper Security must be set to «allow all» for TMCompanion to be installed. It can be reverted to higher security settings after installation.
- Other audio interface products not mentioned are no longer supported.
Pro Tools 9 for Windows must be run from the administrator’s account for MIDI to function. Launch Pro Tools in ‘run this program as an administrator’ mode.
The latency setting must be the same in Pro Tools and in the US-series control panel. Change this in Pro Tools’ Hardware Setup window, and in the US-series control panel.
Please be aware that this activation system is designed and controlled by Steinberg and not TASCAM.
- Install Cubase LE 4 or Cubase LE 5
- Make sure that your computer has a working Internet connection. This connection is necessary to activate the license because the eLicenser Control Center (eLCC) needs to register with our license server.
- Make sure that you have the latest version of the eLCC installed. Click here to download
- Open the eLicense Control Center (eLCC) software and make a note of your Soft-eLicenser number
- Create a user account in the MySteinberg area. If you already have one, please go to step 7.
- The «My Steinberg» area can be found on the Steinberg home page
- Check your email and activate your user account by clicking the link in the confirmation email
- Log in to your MySteinberg account, and click on «Activation & Reactivation», choose «Cubase LE 4» or «Cubase LE 5» and select «Permanent Activation». Enter your Soft-eLicenser and choose your hardware manufacturer
- You will receive an email containing the activation code
- Launch the eLicenser Control Center software. Click the «Enter Activation Code» button to download the license for your Steinberg product to the Soft-eLicenser. To do this, enter the required activation code into the corresponding field. Follow the instructions on screen.
The process above is taken directly from the Steinberg website. Cubase LE4 Cubase LE5
If you are still having problems after following the above instructions, consider posting a message on the Cubase.Net forum
This interface was tested with Windows 8 and no problems were found. It is approved for use with Windows 8.
When attempting to download HP Smart, the first step is to ensure that your device meets the operating system requirements for the application. After confirming that you meet these requirements, then you should access the official download webpage on either your mobile device or computer. There, you will be able to download and install HP Smart. Once installed, open up the application and follow any further instructions.
If you are experiencing problems with your Pantum M6550NW printer, be sure to check the manufacturer’s website for troubleshooting and support options. Additionally, you should make sure that the printer is up-to-date with the latest firmware version. Troubleshooting steps such as restarting both devices (printer & PC/Laptop) or checking cables can help in many scenarios too.
If you are having issues with the Pantum M6550nw driver, please go to https://www.pantum.com/download and select your printer model from the drop-down menu to download and install the correct driver for your system.
Troubleshooting Microsoft Issues can be a time-consuming and complicated process. The goal of this guide is to provide a step-by-step approach to troubleshoot any issues with Microsoft products. We’ll start by providing general advice for diagnosing the problem and then review troubleshooting techniques specific to different types of Microsoft services, such as Windows, Office, or Azure services. With this comprehensive roadmap in hand, you should find yourself better equipped to identify and resolve even complex issues quickly.
Realtek can cause a range of issues that can be difficult to troubleshoot without the right expertise. This comprehensive guide covers everything you need to know for troubleshooting Realtek problems so that you can get back on track quickly and easily.
software that may be blocking TeamViewer. Many firewalls and antivirus programs will block the connection unless you explicitly allow it.
Driver packs are collections of drivers that can be used to update outdated or missing device drivers. If you are having trouble with driver pack, the best thing you can do is use a trusted and reliable driver updater tool to automatically download and install the correct version of the required drivers for your PC. This will ensure all your devices are running on their latest available software.
If you are looking to download the driver for your Canon Pixma MG2500 printer, you can do so from the official Canon website. Simply go to their online support page and search for the model number of your printer. Once selected, click on ‘Drivers & Downloads’ tab and choose your operating system to get access to a list of all available downloads related to that particular model.
If you’re having issues with your Epson L4150 Printer software, try updating the software by downloading and installing the latest version from Epson’s website. You can also refer to their troubleshooting guide for more help on resolving any issues.
KMS Pico is a powerful tool that can be used to activate Windows 10. It works by emulating the Microsoft KMS server on your computer, allowing you to bypass activation processes and activate your copy of Windows for free. To fix this user query, simply download the latest version of KMS Pico from a trusted source and follow the installation instructions when prompted.
See all queries
Drivers /
Sound, video, and game controllers /
TASCAM /
US-200
Device information
Name
US-200
Manufacturer
TASCAM
Type
Sound, video, or game controller
Hardware IDs
MEDIA\US200_AUDIOADAPTER
USB\VID_0644&PID_8034&MI_00
Show all
Driver Fusion
Automatically update and back up drivers
Learn more
Download now
4 available drivers
Show all
US-200
Version:
1.1.4.0
Date:
19 April 2011
Size:
64 KB
INF file:
tus200_a.inf
Windows 11, 10, 8.1, 8, 7
x64
US-200 MIDI
Version:
1.1.4.0
Date:
19 April 2011
Size:
43 KB
INF file:
tus200_m.inf
Windows 11, 10, 8.1, 8, 7
x64
US-200 MIDI
Version:
1.0.4.0
Date:
9 December 2010
Size:
41 KB
INF file:
tus200_m.inf
Windows 11, 10, 8.1, 8, 7
x64
US-200
Version:
1.0.4.0
Date:
9 December 2010
Size:
64 KB
INF file:
tus200_a.inf
Windows 11, 10, 8.1, 8, 7
x64
-
-
#1
Is it possible to run US-200 on Windows 10 64bit or should this device be smashed with a sledgehammer?
I have latest HP Pavilion 15 laptop with Windows 10 64bit installed. I installed ASIO4All and US-200 latest drivers (tried also 1.02 and 1.01, same result). Device has latest firmware 1.01 installed.
I can clearly hear clicks and pops at any latency settings. I use tascam mainly to record guitars, so I need lowest latency setting. It also happens to be the best setting to hear and see this ASIO overload problem. The ASIO meter at Cubase goes like crazy at idle. In case I switch to ASIO4All drivers, the meters stays at 0 position and everything works smoothly. Tascam US-200 clearly doesn’t work as it should. Or does it?
Any advice would be appreciated. Provide some sledgehammer recommendations otherwise. Thanks in advance.
-
-
#2
The answer is Tascam US-200 doesn’t work well with Windows 10 64bit. It kind of works, but it’s very unstable. It’s not recommended to install drivers on Windows 10 64bit because they causes problems.
-
-
#4
Good for you. I tried them all and I had no luck to run it smoothly. Hopefully I can still use it with my other laptop.