Tascam us 122mkii драйвер для windows 10 — Ваш верный помощник с OS Windows

Bus-powered USB 2.0 audio interface

This model has been discontinued.

It has been replaced with the US-2×2.

TASCAM has refreshed its best-selling USB interface with better audio specs and a fresh new look for the US-122mkII. The US-122mkII starts with two great-quality XLR microphone preamps with phantom power for condenser microphones. There’s also a pair of balanced line inputs and a guitar-level in for direct recording of electric guitar or bass. The stereo signal is sent to your computer at up to 96kHz/24-bit audio quality.

The US-122mkII connects to Mac or Windows computers using USB 2.0, and the unit is powered over the USB cable. Zero-latency monitoring is available for recording without the delay going to a computer and back. MIDI input and output jacks allow connection of synths and drum machines. Connect the US-122mkII to monitors through the line output or use headphones with the front-mounted stereo 1/4″ jack. The US-122mkII makes a perfect portable interface with metal components and solid construction built for the road.

The US-122mkII includes a copy of Cubase LE4 from Steinberg. This full-featured recording software captures up to 48 tracks of audio with another 64 MIDI tracks. You can edit your tracks to perfection using a variety of modes and tools. Automated mixing is included to create the perfect master. Cubase LE4 supports VST effect and instrument plug-ins, which an assortment included with the application.

Whether you’re getting started with computer recording or adding a portable interface to your road rig, the TASCAM US-122mkII is the affordable choice for professional results.

Also available is the US-144mkII, which adds an additional line output control, plus S/PDIF digital in and out.

Spec description

	US-144MKII	US-122MKII
Supported sampling frequency	44.1/48/88.2/96kHz
Supported bit rate	16/24bit
Analog audio Inputs
MIC IN
Connecter	XLR-3-31(1:GND, 2:HOT, 3:COLD), BALANCED
Input impedance	2.2k ohms
Nominal input level (INPUT:MAX)	-58dBu
Nominal input level (INPUT:MIN)	-14dBu
Maximum input level (INPUT:MIN)	+2dBu
LINE IN
Connecter	6.3mm(1/4″) TRS-jack(T:HOT, R:COLD, S:GND), BALANCED
Input impedance
MIC/LINE	15k ohms
GUITAR	1M ohms
Nominal input level
MIC/LINE	-40dBu to +4dBu
GUITAR	-51dBV to -7dBV
Maximum input level
MIC/LINE	+20dBu
GUITAR	+9dBV
Analog audio outputs
LINE OUT
Connecter	RCA pin-jack
Output impedance	200ohms
Nominal output level	-10dBV
Maximum output level	+6dBV
Digital audio inputs
COAXIAL
Connecter	RCA pin-jack	—
Format	IEC60958-3(S/P DIF)	—
Digital audio inputs
COAXIAL
Connecter	RCA pin-jack	—
Format	IEC60958-3(S/P DIF) and IEC60958-4(AES/EBU) *Selectable in the Control Panel betwiin	—
PHONES
Connecter	6.3mm(1/4″) stereo phone jack
Maximum output level	18mW+18mW(32ohms loaded)
MIDI
MIDI IN	DIN 5-pin
MIDI OUT	DIN 5-pin
USB
Connecter	USB B type 4-pin
Format	USB 2.0 HIGH SPEED/USB 1.1 FULL SPEED
Power	USB bus powered (5V, Max 500mA)
Power consumption	2.5W
Dimensions	135.4(W)×47(H)×179(D)mm
Weight	0.7kg
Bundle software	Cubase LE
Accessories	CD-ROM (containing driver and manuals), USB cable, DVD-ROM (Cubase LE), Insert sheet for Cubase LE, Warranty card, Owner’s manual

Audio performance
Frequency response	20Hz to 20kHz, +0.5/-1.0dB(44.1/48KHz, MIC IN to LINE OUT) 20Hz to 40kHz, +0.5/-1.5dB(88.2/96KHz, MIC IN to LINE OUT)
S/N ratio
ADC to DAC	98dB(When INPUT knob is set to LINE, 20kHz LPF + A-weighted)
Monitor	107dB(When INPUT knob is set to LINE, 20kHz LPF + A-weighted)
THD
ADC to DAC	0.0045% or less(When INPUT knob is set to LINE, 1kHz +20dBu input, 20kHz LPF)
Monitor	0.002% or less(When INPUT knob is set to LINE, 1kHz +20dBu input, 20kHz LPF)

Operating system requirements
Windows
OS	Windows XP:32bit SP3 or more, 64bit SP2 or more Windows Vista:32bit SP2 or more, 64bit SP2 or more Windows 7:32bit, 64bit Windows 8:32bit, 64bit
CPU	Pentium 4 1.4GHz or more, ADM Athlon 1.4GHz or more
Memory	1GB or more 512MB or more for Windows XP 32bit and Windows Vista 32bit)
Driver	WDM, ASIO, GSIF2
Macintosh
OS	Mac OS X Leopard(10.5.6), Mac OS X Snow Leopard(10.6.8), OS X Lion(V10.7), OS X Mountain Lion(V10.8)
CPU	Intel Processor 1GHz or more, Power PC G4 1GHz or more
Memory	512MB or mor
Driver	Core Audio

Manuals

Documents

Firmware

Windows Drivers

Mac Drivers

FAQs

In case that 24 bit is being selected at the setting of «Select the sample rate and bit depth to be used when running in shared mode» on Windows, PC is re-booted up when system sound on Windows is played.

Please check here for how to avoid it.

Cubase LE is authorized on the Steinberg website. Go to this page to get started.

According to Apple, OS X 10.9.5 includes heightened security measures that will also be part of OS X 10.10. These security measures will affect some TASCAM audio interfaces, so users are advised to be aware, and hold off on updating until further information is available

These products use Apple’s built in CoreAudio driver. The Settings Panel installer is fully compliant with Apple’s latest security measures.

US-2×2
US-4×4

The latest drivers are compliant, but testing is ongoing for these products:

US-322
US-366
US-1200
UH-7000

The OS X 10.9 public beta drivers can continue to be used for these interfaces:

US-122mkII
US-144mkII
US-200
US-600
US-1641
US-1800
US-2000

Cannot be used with the current driver (public or beta):

IF-FW/DMmkII: Development is on-going and a version that is compliant with the new security measures will be made available as soon as possible. Please keep your system at 10.9.4 or earlier if you wish to continue to use the IF-FW/DMmkII.
TASCAM Mixer Companion: Gatekeeper Security must be set to «allow all» for TMCompanion to be installed. It can be reverted to higher security settings after installation.
Other audio interface products not mentioned are no longer supported.

Pro Tools 9 for Windows must be run from the administrator’s account for MIDI to function. Launch Pro Tools in ‘run this program as an administrator’ mode.

The latency setting must be the same in Pro Tools and in the US-series control panel. Change this in Pro Tools’ Hardware Setup window, and in the US-series control panel.

Please be aware that this activation system is designed and controlled by Steinberg and not TASCAM.

Install Cubase LE 4 or Cubase LE 5
Make sure that your computer has a working Internet connection. This connection is necessary to activate the license because the eLicenser Control Center (eLCC) needs to register with our license server.
Make sure that you have the latest version of the eLCC installed. Click here to download
Open the eLicense Control Center (eLCC) software and make a note of your Soft-eLicenser number
Create a user account in the MySteinberg area. If you already have one, please go to step 7.
The «My Steinberg» area can be found on the Steinberg home page
Check your email and activate your user account by clicking the link in the confirmation email
Log in to your MySteinberg account, and click on «Activation & Reactivation», choose «Cubase LE 4» or «Cubase LE 5» and select «Permanent Activation». Enter your Soft-eLicenser and choose your hardware manufacturer
You will receive an email containing the activation code
Launch the eLicenser Control Center software. Click the «Enter Activation Code» button to download the license for your Steinberg product to the Soft-eLicenser. To do this, enter the required activation code into the corresponding field. Follow the instructions on screen.

The process above is taken directly from the Steinberg website. Cubase LE4 Cubase LE5

If you are still having problems after following the above instructions, consider posting a message on the Cubase.Net forum

This interface was tested with Windows 8 and no problems were found. It is approved for use with Windows 8.

Источник

Downloads

US-122MKII

USB 2.0 Two-channel Audio/MIDI Interface

This product is dicontinued.

Manuals and specifications

Others

Supported Operating Systems

	Date	Language	Size
	Supported Operating Systems Windows: Windows 10 (May 2019, version 1903), Windows 8.1, Windows 8, Windows 7, Windows Vista, Windows XP Mac: macOS Mojave (10.14), macOS High Sierra (10.13), macOS Sierra‎ (10.12), OS X El Capitan (10.11), OS X Yosemite (10.10), OS X Mavericks (10.9), OS X Mountain Lion (10.8), OS X Lion (10.7), OS X Snow Leopard (10.6), OS X Leopard (10.5.6), OS X Tiger (10.4.11)	07.03.2025

System Software / Firmware

Drivers

Applications

Источник

Drivers /
Universal Serial Bus controllers /
TASCAM /
US-122 MKII

Device information

Name

US-122 MKII

Manufacturer

TASCAM

Type

Universal Serial Bus controller

Hardware ID

USB\VID_0644&PID_8021

Show all

Driver Fusion

Automatically update and back up drivers

Learn more

Download now

tascusb2.inf

Windows 11, 10, 8.1, 8, 7
x64

Источник

Hello!

I am using Windows 10 Home, and US-122mkII.
All was working fine, until couple of days ago. I couldn’t get any sound out from the interface, so I went to Device Manager, and found a !-sign on top of US-122mkII… and it was there two times, listed under ‘other devices’. I tried to fix the error, but Windows couldn’t do anything. I tried to install it again directly from the Device Manager, but Windows said that there was an error. So only was to download the latest driver from Tascam page, and then installed it manually. After PC rebooted to finish the installation, and the interface was working again well.
But then, like in every evening, I closed my PC, and in the next day started Windows again, clicked the interface in to USB port, and BLAM! the same problem again! There was a pop-up window while connecting the port, saying ‘installing the driver’… but in Device Manager it’s like I told earlier. Very frustrating!!!
What can I do to fix this problem? I don’t like to install the driver every day again & again & again…

Because there was no help, not even from Tascam support (wrote them 2 times), I unistalled Windows 10 and installed Windows 7, as it was the system which came with my laptop.

Now I have still problem with this same interface. When I am playing music or watching video in internet, sometimes the media player stops. Only way to start it again, is to unplug the interface and then to plug it again. This happens daily about 3-5 times — so really not an ideal way. I have installed the driver again, but this doesn’t fix this bug. I have used the latest driver found from Tascam website.

In Windows Device Manager I see a note on Midi Device — I check that, it says ‘driver not installed’… I try to fix it, but Windows doesn’t fix the problem. Not sure if that Midi Device problem is connected to that media player problem…

Any ideas?

anyone not having the same problem? my media players are stopping at least once every 20 mins (or less)… I’ve contacted to Tascam UK support 4 times, but they are not answering at all. What kind of support is that??? They are doing their job.

Hi coconutz,

I had a similar problem yesterday. I also have windows 10 home.
First I uninstalled all my previous drivers (and uninstalled it in device manager).
Than I installed 2 drivers and a firmware update. This did the trick for me.

http://tascam.com/content/downloads/products/312/tascam_usb2_x64_2.02.zip
https://www.tascam.eu/sw/us-122l/TASCAM_USB2_x64_v202.zip
https://www.tascam.eu/sw/us-122l/US-122L_144_Win32_FW_v111.zip

Problem with the some of the drivers is that they are no longer compatible with Windows 10. But there is a solution for this.

Install old drivers procedure

2) In Control Panel/Programs/Programs and Features choose Run Programs Made for Previous Versions of Windows. It will open Program Compatibility Troubleshooter. Click Next.

3) Your US-122 driver will not be listed there, so choose Not Listed and browse for it your downloads folder. You need the .exe file — in my case it did not show .exe extension, but it will show up once you choose it (remember, upzip first!).

4) Program Compatibility Troubleshooter will ask you to select Troubleshooting Option. Click on Troubleshoot Program.

5) When asked «What problems do you experience?» click on first — «The program worked in earlier versions of Windows but won’t install or run now.»

6) When asked for previous version of windows, choose «I don’t know». Another window opens, asking your permission to install Tascam.

7) You will then have to install Tascam. Click Yes throughout.

Hope this helps!

Hello! Thanks for the reply!

Actually, I already installed Win 7 Home Premium, because I had too much problems with Win 10. I got an answer from Tascam support also… after the advices I did these things:

— latency from normal to very high
— checked the usb ports, all should be 2.0
— adjusted «processor scheduling» to «best performance for background services».
— background programs have been minimized

I never installed that firmware file, because I never knew what that… I still don’t know, but I installed it anyway. Someone could tell what’s that firmware thing is… for what? Now I just need to wait and see if my new settings are doing things better.

I see Lloyd, you didn’t install the latest drivers… or did you? I wasn’t sure what your links actually are, I thought some were older versions.

Thanks for the tips coconutz. I have a us 122L.
I got the drivers from the website. Think they are the most recent (those were the links it sent).
Are there newer versions out there?

thx

ah, that’s why it was confusing… I have US-122mkII, and you have US-122L. different drivers for sure

Hi there!

If somebody suffers with the same problem as coconutz (and me), here it is the solution: whatch this youtube video and follow the instructions.
I don’t exactly which step helped me, but now everything goes smoothly under win 10 with US-122 MKII. I hope, this answer is not to late!

Hi coconutz,

I had a similar problem yesterday. I also have windows 10 home.
First I uninstalled all my previous drivers (and uninstalled it in device manager).
Than I installed 2 drivers and a firmware update. This did the trick for me.

http://tascam.com/content/downloads/products/312/tascam_usb2_x64_2.02.zip

https://www.tascam.eu/sw/us-122l/TASCAM_USB2_x64_v202.zip

https://www.tascam.eu/sw/us-122l/US-122L_144_Win32_FW_v111.zip

Problem with the some of the drivers is that they are no longer compatible with Windows 10. But there is a solution for this.

Install old drivers procedure

2) In Control Panel/Programs/Programs and Features choose Run Programs Made for Previous Versions of Windows. It will open Program Compatibility Troubleshooter. Click Next.

3) Your US-122 driver will not be listed there, so choose Not Listed and browse for it your downloads folder. You need the .exe file — in my case it did not show .exe extension, but it will show up once you choose it (remember, upzip first!).

4) Program Compatibility Troubleshooter will ask you to select Troubleshooting Option. Click on Troubleshoot Program.

5) When asked «What problems do you experience?» click on first — «The program worked in earlier versions of Windows but won’t install or run now.»

6) When asked for previous version of windows, choose «I don’t know». Another window opens, asking your permission to install Tascam.

7) You will then have to install Tascam. Click Yes throughout.

Hope this helps!

Thanks that worked for me. I was desperate

Источник

The HD Audio Function 01 component by AMD (Vendor ID: 1002, Device ID: AA01) features Subsystem ID 00AA0100 and Revision 1007, designed to deliver high-definition audio processing for enhanced system sound performance and compatibility.

Realtek HD Audio Manager Not Showing Up explores common reasons why the audio utility might be missing and provides step-by-step fixes. Learn how to troubleshoot driver issues, reinstall the software, adjust Windows settings, or restore access via the Control Panel. Discover quick solutions to resolve visibility problems and regain control over your audio configurations.

Step-by-step instructions for installing the Epson L3250 printer on your notebook. Learn to download drivers, connect via USB/Wi-Fi, configure settings, and troubleshoot issues for seamless setup. Start printing efficiently in minutes!

Learn how to download, install, or update Realtek HD Audio Driver on Windows 10/11 for optimal sound performance. This guide covers manual downloads from official sources, automatic updates via Device Manager, and troubleshooting common audio issues. Ensure your system’s compatibility and enjoy seamless audio quality with the latest Realtek drivers.

The Griffin PowerMate is a versatile, programmable USB controller designed to enhance productivity on Mac and Windows. Featuring a sleek aluminum scroll wheel and customizable buttons, it enables tailored shortcuts, macros, and app controls for creative workflows, audio editing, gaming, or automation. Intuitive software allows effortless setup, adapting to your unique needs for seamless, tactile control.

Learn how to set up your Epson L3250 printer quickly with this simple guide. Follow step-by-step instructions for unboxing, installing ink, connecting to Wi-Fi, and installing drivers for Windows or Mac. Troubleshoot common issues and start printing hassle-free!

Learn how to connect your Epson L3250 printer to Wi-Fi in a few simple steps. Start by turning on the printer, then navigate to the Wi-Fi setup via the control panel. Select your network, enter the password, and confirm the connection. Use the Epson Smart Panel app for troubleshooting or additional guidance. Stay wireless and print effortlessly!

Resetting your Epson L3110 printer can resolve errors, clear internal memory, or prepare it for a new setup. This guide provides step-by-step instructions, including using the printer’s physical buttons or Epson’s software tools. Learn how to safely reset settings, troubleshoot common issues, and restore default configurations for optimal performance. Always follow manufacturer guidelines to avoid damage.

Download Epson L3150 Printer drivers and software to set up your all-in-one inkjet printer effortlessly. Access official Epson resources for seamless installation, wireless connectivity, and optimal performance. Ensure compatibility with Windows, macOS, and other operating systems for printing, scanning, and copying tasks. Simplify setup with user-friendly tools and updates tailored for the L3150 model.

Learn how to create a bootable Windows 11 USB drive with this step-by-step guide. Follow simple instructions for preparing your USB, using Microsoft’s Media Creation Tool, and installing Windows 11 effortlessly. Perfect for clean installs, upgrades, or troubleshooting – simplify your setup process in minutes!

See all queries

Источник