Windows Server Restart Apache
Apache is an open-source web server that is widely used to host websites on Windows and Linux servers. While Apache is a reliable and stable web server, there may be instances when the server needs to be restarted. In this article, we’ll be discussing how to restart Apache on a Windows Server.
Why Restart Apache on a Windows Server?
There are several reasons why you may need to restart Apache on your Windows server. Some of these reasons include:
- To apply new configurations that have been made to your server.
- To free up resources that may have been consumed by Apache processes.
- To resolve issues with the server, such as crashes or slow performance.
How to Restart Apache on a Windows Server
Restarting Apache on a Windows server is a pretty straightforward process. Here are the steps to do it:
- Open the Start menu and type in “services.msc”. Press enter to open the Services tool.
- Scroll down to locate the Apache service. The name of the service may vary based on the version of Apache you’re running.
- Right-click on the Apache service and select “Restart”.
- Wait for a few seconds for the service to restart. You can check the status of the service to see if it has successfully restarted.
- If the service status is “Running”, then Apache has successfully restarted.
Conclusion
Restarting Apache on a Windows server is a simple process that can be done in just a few clicks. Whether you need to apply new configurations, free up resources, or resolve issues with the server, restarting Apache is a good solution to all these problems. If you encounter any issues while restarting Apache or if the server does not start properly, you may need to seek the help of a server administrator or a technician to resolve the issue.
Windows Server Restart Apache: Как это сделать?
Apache – это кроссплатформенный веб-сервер, который изначально был создан для Unix-подобных операционных систем. Однако, за последние годы, Apache также стал доступен для Windows. Если вы используете Apache на Windows, то, возможно, вам придется остановить и перезапустить его по разным причинам.
Когда может понадобиться перезапустить Apache?
- Вы внесли изменения в конфигурационные файлы Apache и хотите внести их в действие.
- Apache начинает работать медленнее из-за большого количества запросов.
- Apache не отвечает на запросы и вы обнаружили, что веб-сервер не работает.
К счастью, в Windows есть несколько способов остановить и перезапустить Apache. Рассмотрим несколько из них.
Как остановить Apache на Windows?
Прежде чем остановить Apache, необходимо убедиться, что вы обладаете правами администратора. Если у вас есть административные права, вы можете использовать любой из следующих способов:
Способ 1: Остановка Apache через диспетчер задач Windows.
Правой кнопкой мыши щелкните иконку диспетчера задач в нижней части экрана и выберите «Диспетчер задач». В диспетчере задач найдите процесс httpd.exe и щелкните правой кнопкой мыши по этому процессу. Выберите «Завершить задачу». Это остановит Apache.
Способ 2: Остановка Apache через командную строку.
В Windows можно использовать команду net stop для остановки службы Apache. Откройте командную строку с помощью сочетания клавиш Win + R. Введите cmd и нажмите клавишу Enter. В командной строке введите команду:
net stop Apache
Убедитесь, что вы вводите команду от имени администратора.
Как перезапустить Apache на Windows?
Как только Apache остановлен, вы можете перезапустить его, используя любой из следующих способов:
Способ 1: Перезапуск Apache через диспетчер задач Windows.
Правой кнопкой мыши щелкните иконку диспетчера задач в нижней части экрана и выберите «Диспетчер задач». В диспетчере задач найдите процесс httpd.exe и щелкните правой кнопкой мыши по этому процессу. Выберите «Завершить задачу». Это остановит Apache.
Способ 2: Перезапуск Apache через командную строку.
В Windows можно использовать команду net start для перезапуска службы Apache. Откройте командную строку с помощью сочетания клавиш Win + R. Введите cmd и нажмите клавишу Enter. В командной строке введите команду:
net start Apache
Убедитесь, что вы вводите команду от имени администратора.
Итог
В этой статье мы рассмотрели, как остановить и перезапустить Apache на Windows. Наиболее простыми способами являются остановка и перезапуск через диспетчер задач Windows или командную строку.
Обратите внимание, что если веб-сервер работает в качестве службы Windows, то вы можете использовать утилиту служб Windows для остановки и перезапуска Apache. Однако, это может сделать процесс более сложным и требовательным к времени.
Windows Server Restart Apache: Как выполнить перезагрузку сервера и остановить и запустить Apache?
Владельцы веб-сайтов и веб-разработчики знают, что настройка веб-сервера Apache на сервере может иногда вызывать проблемы. Это может произойти, когда Apache не отвечает на запросы клиентов или когда происходит сбой в работе сервера. В этой статье мы рассмотрим, как перезагрузить Windows сервер и остановить и запустить Apache.
Перезагрузка сервера в Windows
Перезагрузка сервера – это стандартная процедура, которая позволяет решить множество проблем, связанных с работой сервера. В Windows сервере процесс перезагрузки выполнить несложно.
- Изначально, нажмите на кнопку «Пуск» и выберите «Выключить компьютер».
- Далее, выберите опцию «Перезагрузить» и нажмите кнопку «OK».
- Сохраните все данные и данные будут автоматически сохранены, пока сервер будет перезагружаться.
Будьте внимательны, если на сервере есть процессы, которые необходимы для работы, они могут быть автоматически закрыты и перезагрузка может занять больше времени.
Остановка и запуск Apache
Остановить и затем запустить сервер Apache, должно выполняться правильным образом. Вот пошаговая инструкция:
- Войдите в панель управления сервера и найдите административную консоль Apache.
- В консоли, нажмите на кнопку «Stop» или «Остановить».
- Когда Apache остановился, чтобы запустить его снова, просто нажмите кнопку «Start» или «Запустить».
Теперь вы можете проверить работоспособность Apache, введя адрес своего веб-сайта в браузере. Если он работает нормально, то проблем не будет.
Итог
Если у вас возникли проблемы с веб-сайтом, которые связаны с сервером, используйте эти простые инструкции для перезагрузки Windows сервера и остановки и запуска Apache.
Хорошая работа сервера Apache – это одна из ключевых вещей, от которой зависит успех вашего веб-сайта. Помните, что перезагрузка сервера является стандартной процедурой и может помочь избежать многих проблем, связанных с работой сервера.
REMEMBER: Хайпить всех подряд – не красиво. NatGeo people, no wars and NSFW.
- How do i restart apache in windows sysstem
- How to restart Apache server from shell
- How do I restart Apache on Windows? «Apache -k restart» gives error «No
- Support Network
- Powershell script to restart Apache Process
- Apache: Starting, Stopping, and Restarting
How do i restart apache in windows sysstem
If the service exists, but has a custom name such as «My Awesome Apache
Service», then you have to specify that name when you want to send it any
signal. So, if you have installed it with. httpd.exe -k install -n «My Awesome
Apache Service». you have to restart it with. httpd.exe -k restart -n «My
Awesome Apache Service».
httpd -k install
httpd.exe -k restart -n "MyServiceName"
httpd.exe -h install
httpd.exe -k restart
httpd.exe -k install -n "My Awesome Apache Service"
httpd.exe -k restart -n "My Awesome Apache Service"How to restart Apache server from shell
You need to restart your Apache server when you change settings in php.in,
httpd.conf or some other config file. You need to restart the server because
the changes which you made will only effect after the restart. To restart your
server, simply type the following command in your shell.
;type the following command in your shell
/etc/init.d/httpd restartHow do I restart Apache on Windows? «Apache -k restart» gives error «No
installed service named «Apache2»
There is a small application Apache installs, usually displayed in the system
tray from where you can restart Apache. You can restart a service with many
utilities, like sc.exe, but just using the shell, use. net stop Apache2.2-Zend
&& net start Apache2.2-Zend In my case, the name of the service is
Apache2.2-Zend.
net stop Apache2.2-Zend && net start Apache2.2-Zend
iireset/stop
services.mscSupport Network
You might need to restart Apache® when you want changes that you make take
effect, or when you need to bring Apache’s resource use back to a normal
range. However, sometimes Apache fails to restart. This article shows you how
to check your configuration settings and restart Apache when it fails.
[[email protected] ~]$ httpd –S
Syntax OK
Syntax error on line 51 of /etc/httpd/conf/httpd.conf:
Invalid command 'erverRoot', perhaps misspelled or defined by a module not included in the server configuration
tail –f /var/log/httpd/error_log
# For RHEL/CentOS 6
[[email protected] ~]$ sudo /etc/init.d/httpd restart
# For Ubuntu 14/Debian 8
[[email protected] ~]$ sudo /etc/init.d/apache2 restart
# For RHEL/CentOS 7+
[[email protected] ~]$ sudo systemctl restart httpd
# For Ubuntu 16+/Debian 9+
[[email protected] ~]$ sudo systemctl restart apache2
Stopping httpd: [FAILED]
Starting httpd: httpd: Could not reliably determine the server's fully qualified domain name, using 2001:4801:7824:103:9ed:a5a8:3301:d53a for ServerName
[Wed Sep 10 20:48:11 2014] [warn] NameVirtualHost *:443 has no VirtualHosts
[Wed Sep 10 20:48:11 2014] [warn] NameVirtualHost *:80 has no VirtualHosts
(98)Address already in use: make_sock: could not bind to address [::]:80
(98)Address already in use: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs
[[email protected] ~]$ sudo netstat –plnt
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 5272/sshd
tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 1581/master
tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 5835/mysqld
tcp 0 0 :::80 :::* LISTEN 5272/sshd
tcp 0 0 ::1:25 :::* LISTEN 1581/master
httpd dead but subsys locked, but pid exists
# For RHEL/CentOS based distributions
[[email protected] ~]$ sudo rm /var/lock/subsys/httpd
# For Ubuntu/Debian based distributions
[[email protected] ~]$ sudo rm /var/lock/subsys/apache2
# For RHEL/CentOS 6
[[email protected] ~]$ sudo /etc/init.d/httpd restart
# For Ubuntu 14/Debian 8
[[email protected] ~]$ sudo /etc/init.d/apache2 restart
# For RHEL/CentOS 7+
[[email protected] ~]$ sudo systemctl restart httpd
# For Ubuntu 16+/Debian 9+
[[email protected] ~]$ sudo systemctl restart apache2Powershell script to restart Apache Process
A better way is to use httpd -k restart to restart it gracefully. So, for
those that might need something like this, instead of 3 lines above (stop-
service, start-service), replace them with call to your httpd.exe like this:
C:\your\path\to\Apache\bin\httpd.exe -k restart -n «YOURSERVICENAME» -f
«C:\your\path\to\Apache\conf\httpd-YOURNAME.conf
$Threshold = 200 * 1024 * 1024; # Bytes (209,715,200 bytes = 0.195GB)
$ServiceName = my service name;
Get-WmiObject -ComputerName "localhost" -Class Win32_PerfFormattedData_PerfProc_Process | where { $_.Name -like "httpd*" } | foreach {
$procobj = $_;
if($procobj.workingset -gt $Threshold)
{
stop-Service $ServiceName;
start-Service $ServiceName;
$stamp = Get-Date
echo $($stamp + " Started service: " + $ServiceName);
#sleep 5; //Do I need this and if so, where should it be placed?
}
}
$Threshold = 200 * 1024 * 1024; # Bytes (209,715,200 bytes = 0.195GB)
$ServiceName = my service name;
Get-WmiObject -ComputerName "localhost" -Class Win32_PerfFormattedData_PerfProc_Process | where { $_.Name -like "httpd*" } | foreach {
$procobj = $_;
if($procobj.workingset -gt $Threshold)
{
stop-Service $ServiceName;
start-Service $ServiceName;
$stamp = Get-Date
echo $($stamp + " Started service: " + $ServiceName);
break;
}
}Apache: Starting, Stopping, and Restarting
If you are running Apache as a console application, you will launch it from
the Start menu, in the Apache submenu. This will open up a console in which
you will see an indication that Apache is running. To shutdown Apache, or
restart it, the recommended method is to open another console, and type the
commands. apache -k shutdown.
% apachectl help
usage: /usr/local/bin/apachectl (start|stop|restart|
fullstatus|status|graceful|configtest|help)
start - start httpd
stop - stop httpd
restart - restart httpd if running by sending a SIGHUP or start if
not running
fullstatus - dump a full status screen; requires lynx and mod_status enabled
status - dump a short status screen; requires lynx and mod_status enabled
graceful - do a graceful restart by sending a SIGUSR1 or start if not running
configtest - do a configuration syntax test
help - this screenWelcome to our informative guide on how to windwos restart Apache server. Whether you’re a website owner or a server administrator, it’s essential to know how to restart Apache to ensure your website runs smoothly. In this article, we’ll cover everything you need to know about windwos restarting Apache server, including its advantages and disadvantages, FAQs, and more.
Introduction
Before we dive into the details, let’s start with the basics. Apache is a widely-used web server software that runs on various operating systems, including Windows, Mac, and Linux. It’s an open-source software that’s free to use and provides a secure and stable environment for hosting websites.
However, like any other software, Apache server may encounter issues that require restarting at some point. Restarting the server can help resolve issues such as memory leaks, configuration changes, and security patches.
So, in this guide, we’ll show you how to restart Apache server on Windows OS step by step.
How to Restart Apache Server on Windows OS
Restarting Apache on Windows OS is a relatively easy process. You can follow the steps below to restart Apache server:
|
Steps |
Description |
|---|---|
|
Step 1 |
Open the XAMPP control panel |
|
Step 2 |
Click on the “Apache” module |
|
Step 3 |
Click on the “Stop” button to stop Apache server |
|
Step 4 |
Wait a few seconds for the process to complete |
|
Step 5 |
Click on the “Start” button to start Apache server again |
That’s it! Your Apache server is now restarted, and you can resume website access.
Advantages and Disadvantages of Restarting Apache Server
Advantages
Restarting Apache server can offer several advantages, including:
1. Resolves Memory Leaks
Over time, Apache server may consume a lot of memory due to various factors such as frequent requests, large files, and low capacity. Restarting the server can free up memory and improve its efficiency.
2. Allows Configuration Changes
Restarting Apache server allows you to apply changes to its configuration files, such as adding new virtual hosts, modifying security settings, or updating SSL certificates. The changes take effect immediately after restarting the server.
3. Helps with Security Updates
Restarting Apache server can help with implementing the latest security patches to address any vulnerabilities that could compromise your website’s security.
Disadvantages
While restarting Apache server can be beneficial, it also comes with a few drawbacks:
1. Downtime
Restarting Apache server means your website will be temporarily unavailable during the process. This can negatively impact user experience and potentially lead to lost revenue.
2. Loss of Session Data
When you restart Apache server, any session data stored in its memory will be lost. This means users may need to re-login to their accounts or lose any unsaved data.
3. Risk of Misconfiguration
Restarting Apache server can lead to misconfiguration issues if you forget to apply changes properly. This can cause errors that prevent your website from functioning correctly.
Frequently Asked Questions (FAQs)
1. What happens when you restart Apache server?
When you restart Apache server, it stops its processes, frees up memory, applies any configuration changes, and starts its processes again.
2. Is restarting Apache server necessary?
Restarting Apache server is necessary to resolve memory leaks, apply configuration changes, and implement security patches.
3. How often should you restart Apache server?
The frequency of restarting Apache server depends on your website’s traffic and usage level. In general, it’s recommended to restart Apache server every few weeks or once a month.
4. How long does it take to restart Apache server?
The time it takes to restart Apache server depends on various factors such as the server’s capacity and the number of requests. Generally, it takes a few seconds to a few minutes to restart Apache server.
5. Can restarting Apache server cause data loss?
Restarting Apache server can cause data loss if there’s any session data stored in its memory. Users may need to re-login and may lose any unsaved data.
6. Can restarting Apache server fix website errors?
Restarting Apache server can help fix website errors caused by memory leaks, configuration changes, or security patches. However, it may not resolve all website errors.
7. Can I restart Apache server on Linux OS using the same method?
Yes, you can restart Apache server on Linux OS using similar steps. However, the command syntax and software packages may differ slightly.
Conclusion
Restarting Apache server on Windows OS is a crucial task that website owners and server administrators must know how to do. By following the steps outlined in this guide, you can restart Apache server quickly and efficiently. Remember to weigh the advantages and disadvantages of restarting Apache server and consider how it may impact your website’s downtime and data loss.
Thank you for taking the time to read this informative guide. We hope it has provided you with valuable insights on how to windwos restart Apache server.
Disclaimer
The information provided in this guide is for informational purposes only. The author and publisher of this article are not responsible for any damages or losses that may occur as a result of following the instructions outlined in this guide. Always exercise caution when making changes to your website or server configuration.
Video:Windwos Restart Apache Server: Everything You Need to Know!
If you’re using Bitnami to manage your web server, you might need to restart Apache from time to time to apply changes to your .htaccess file. In this article, we’ll explore the process of restarting Apache on Bitnami instances, including how to use the command line interface and the Bitnami Manager tool. Stay tuned to learn more about managing your web server with Bitnami!
Restarting Apache in Bitnami: Best Practices for Efficient htaccess File Management
The article “Restarting Apache in Bitnami: Best Practices for Efficient htaccess File Management” discusses how to efficiently manage the .htaccess file in a Bitnami stack.
One important point the article makes is the need for proper backups before editing the .htaccess file. This ensures that if something goes wrong, you can easily restore the previous version.
Another key point is the need to test changes made to the .htaccess file before restarting Apache. This can be done by using online tools or a local testing environment.
When it comes to restarting Apache, the article recommends using the command line interface and verifying that the restart was successful. The command to restart Apache in Bitnami is:
sudo /opt/bitnami/ctlscript.sh restart apache
Overall, the article provides useful tips for effective management of the .htaccess file in a Bitnami stack, including proper backup procedures and thorough testing before restarting Apache.
Starting Spring Boot in less than 100ms startup time | Spring Native Example | GraalVM
How to Access phpMyAdmin using an SSH tunnel
What is the procedure to restart apache2 in Bitnami?
To restart Apache2 in a Bitnami environment, you can use the following command:
sudo /opt/bitnami/ctlscript.sh restart apache
This will stop and start the Apache2 server, which will reload any changes made to the .htaccess file or other configurations. You can also use start or stop instead of restart if you only want to start or stop the server.
What is the process to restart the Apache service?
To restart the Apache service after making changes to the .htaccess file, follow these steps:
1. Connect to your server using SSH or a terminal.
2. Type the command sudo systemctl restart apache2 (or sudo service apache2 restart on older systems).
3. Press enter to execute the command.
4. If prompted, enter your user password or root password.
This will restart the Apache service and apply any changes made to the .htaccess file immediately. It’s important to note that any syntax errors in the .htaccess file can cause the server to fail, so be sure to test the site after making changes.
How can I restart Apache httpd?
To restart Apache httpd, you can use the apachectl command. This command allows you to control and manage the Apache server.
To restart Apache httpd, follow these steps:
1. Open a terminal window or SSH into your server.
2. Type the following command: sudo apachectl restart.
3. Press enter.
This will restart the Apache server and any changes made to the htaccess file will take effect. It’s important to note that restarting the Apache server can cause a brief downtime for your website, so it’s recommended to schedule this during off-peak hours.
What is the command to restart Apache on Windows?
The command to restart Apache on Windows is “httpd.exe -k restart”. This will reload the configuration file, including any changes made to the htaccess file.
How can I restart Apache in Bitnami to apply changes made in my .htaccess file?
To restart Apache in Bitnami and apply changes made in your .htaccess file, you can follow these steps:
1. Connect to your server through SSH.
2. Navigate to the Bitnami installation directory:
“`
cd /opt/bitnami/
“`
3. Execute the following command to stop Apache:
“`
sudo ./ctlscript.sh stop apache
“`
4. Wait for Apache to stop completely.
5. Start Apache again using the following command:
“`
sudo ./ctlscript.sh start apache
“`
Note: Make sure to save your changes to the .htaccess file before restarting Apache. You can use a text editor or FTP client to modify the file.
Does restarting Apache in Bitnami cause any downtime for my website while the .htaccess file is being reloaded?
Restarting Apache in Bitnami may cause a brief downtime for your website while the .htaccess file is being reloaded. During the restart process, Apache will stop and then start again, which will result in a brief interruption of service. However, the amount of downtime will depend on the size and complexity of your website, as well as the hardware resources available on your server. It’s always a good idea to test any changes to your .htaccess file on a staging or development server before making them live on your production server to minimize any potential downtime.
Is it necessary to restart Apache in Bitnami every time I make changes to my .htaccess file or is there another way to apply them?
It is not always necessary to restart Apache in Bitnami every time you make changes to your .htaccess file. Some changes, such as redirects or authentication rules, will take effect immediately. However, certain settings, such as those related to caching, may require a restart of the Apache server to take effect.
If you need to restart Apache, you can do so by accessing the Bitnami console and running the following command:
“`
sudo /opt/bitnami/ctlscript.sh restart apache
“`
Note: Always remember to make a backup of your .htaccess file before making any changes to it.
In conclusion, the bitnami restart apache command is a handy tool for web developers who are working with the htaccess file. It allows you to quickly make changes to your configuration without having to restart your entire web server. This can save time and help prevent any downtime or interruptions to your website. Remember to use this command whenever you make changes to your htaccess file to ensure that they are properly implemented. By utilizing the bitnami restart apache command, you can streamline your workflow and improve the overall performance of your website.
Post Views: 1,243
If you don’t have Apache installed as a service, the window will remain visible until you stop Apache by pressing Control-C in the console window where Apache is running in. The server will exit in a few seconds.
- How do I turn off Apache in Windows 10?
- How do I stop all Apache processes?
- How do I restart Apache on Windows?
- How do I stop Apache httpd EXE?
- How do I shut down Apache?
- How do I know if Apache is running on Windows?
- How do I stop all servers?
- How do I stop Apache from starting automatically?
- How do I restart Apache on Windows 10?
- Why did Apache shut down unexpectedly?
- How do I disable Httpd in Windows?
- How do I start Apache Tomcat on Windows?
How do I turn off Apache in Windows 10?
Stopping apache:
- Log in as the application user.
- Type apcb.
- If apache was run as the application user: Type ./apachectl stop.
How do I stop all Apache processes?
In order to stop or restart the Apache HTTP Server, you must send a signal to the running httpd processes. There are two ways to send the signals. First, you can use the unix kill command to directly send signals to the processes.
How do I restart Apache on Windows?
2 Answers
- Click the start button and type CMD (if on Windows Vista or later and Apache is installed as a service make sure this is an elevated command prompt)
- In the command window that appears type cd C:\xampp\apache\bin (the default installation path for Xampp)
- Then type httpd -k restart.
How do I stop Apache httpd EXE?
Of course, Windows Task Manager can also be used to stop the Apache server. Select «httpd.exe» on Processes tab on Windows Task Manager, and click the «End Process» button. Then click «Yes» on the warning message to terminate «httpd.exe». Repeat the process again if see more than one instances of «httpd.exe».
How do I shut down Apache?
Debian/Ubuntu Linux Specific Commands to Start/Stop/Restart Apache
- Restart Apache 2 web server, enter: # /etc/init.d/apache2 restart. $ sudo /etc/init.d/apache2 restart. …
- To stop Apache 2 web server, enter: # /etc/init.d/apache2 stop. …
- To start Apache 2 web server, enter: # /etc/init.d/apache2 start.
How do I know if Apache is running on Windows?
- Bring up the task manager by pressing Ctrl + Shift + Esc .
- Go to the Processes tab and sort by Image Name. In Server 2012, go to the Details tab and sort by Name.
- Look for apache.exe (or httpd.exe) and check the User Name column.
How do I stop all servers?
To stop all Application Servers on the host, do one of the following:
- (Windows) Do one of the following: From the command line window where the Application Server is running, enter Ctrl-C . From the Windows Start menu, select Settings > Control Panel. …
- (UNIX) Enter the following: /etc/init.d/blappserv stop.
How do I stop Apache from starting automatically?
The procedure to stop Apache from starting at boot time on Linux is as follows:
- Open the terminal application.
- Login using ssh for remote server. …
- Use sudo systemctl disable httpd && sudo systemctl stop httpd on RHEL/CentOS/Oracle/Fedora Linux.
How do I restart Apache on Windows 10?
First you must bring the command prompt to the bin of Apache folder on your computer, i.e my Apache folder is in directory C:\Apache24\ . I used command cd C:\Apache24\bin and then used command httpd -k restart to restart the Apache service.
Why did Apache shut down unexpectedly?
The XAMPP error “Apache shutdown unexpectedly” is commonly caused by another program, such as Skype, using the default Apache port. … As we discussed in this article, the easiest way to fix this problem is to update XAMPP’s Apache configuration settings. You can do this by editing the httpd. conf file and the http-ssl.
How do I disable Httpd in Windows?
Running as a service should be preferred over running in a console window because this lets Apache end any current operations and clean up gracefully. But if the server is running in a console window, you can only stop it by pressing Control-C in the same window.
How do I start Apache Tomcat on Windows?
Starting the Apache Tomcat server
- Click the Start menu and right-click Computer and select Manage.
- Expand Configuration and click Services.
- Right-click the Tomcat service and select Start.