Python for windows 2000

Pick a software title…
to downgrade to the version you love!

Python 2.6  Change Log

Python 2 Builds

• Python 3.3.0
• Python 3.2.3
• Python 3.2.2
• Python 3.2.1
• Python 3.2
• Python 3.1.4
• Python 3.1.3
• Python 3.1.2
• Python 3.1.1
• Python 3.1
• Python 3.0.1
• Python 3.0
• Python 2.7.3
• Python 2.7.2
• Python 2.7.1
• Python 2.7
• Python 2.5.2

OldVersion.com Points System

When you upload software to oldversion.com you get rewarded by points. For every field that is filled out correctly, points will be
rewarded, some fields are optional but the more you provide the more you will get rewarded!

So why not upload a peice software today, share with others and get rewarded! click here to upload software>>

Contents

• Python on Windows FAQ
  • How do I run a Python program under Windows?
  • How do I make Python scripts executable?
  • Why does Python sometimes take so long to start?
  • Where is Freeze for Windows?
  • Is a *.pyd file the same as a DLL?
  • How can I embed Python into a Windows application?
  • How do I use Python for CGI?
  • How do I keep editors from inserting tabs into my Python source?
  • How do I check for a keypress without blocking?
  • How do I emulate os.kill() in Windows?
  • Why does os.path.isdir() fail on NT shared directories?
  • cgi.py (or other CGI programming) doesn’t work sometimes on NT or win95!
  • Why doesn’t os.popen() work in PythonWin on NT?
  • Why doesn’t os.popen()/win32pipe.popen() work on Win9x?
  • PyRun_SimpleFile() crashes on Windows but not on Unix; why?
  • Importing _tkinter fails on Windows 95/98: why?
  • How do I extract the downloaded documentation on Windows?
  • Missing cw3215mt.dll (or missing cw3215.dll)
  • Warning about CTL3D32 version from installer

How do I run a Python program under Windows?¶

This is not necessarily a straightforward question. If you are already familiar
with running programs from the Windows command line then everything will seem
obvious; otherwise, you might need a little more guidance. There are also
differences between Windows 95, 98, NT, ME, 2000 and XP which can add to the
confusion.

Unless you use some sort of integrated development environment, you will end up
typing Windows commands into what is variously referred to as a “DOS window”
or “Command prompt window”. Usually you can create such a window from your
Start menu; under Windows 2000 the menu selection is . You should be able to recognize
when you have started such a window because you will see a Windows “command
prompt”, which usually looks like this:

The letter may be different, and there might be other things after it, so you
might just as easily see something like:

D:\Steve\Projects\Python>

depending on how your computer has been set up and what else you have recently
done with it. Once you have started such a window, you are well on the way to
running Python programs.

You need to realize that your Python scripts have to be processed by another
program called the Python interpreter. The interpreter reads your script,
compiles it into bytecodes, and then executes the bytecodes to run your
program. So, how do you arrange for the interpreter to handle your Python?

First, you need to make sure that your command window recognises the word
“python” as an instruction to start the interpreter. If you have opened a
command window, you should try entering the command python and hitting
return. You should then see something like:

Python 2.2 (#28, Dec 21 2001, 12:21:22) [MSC 32 bit (Intel)] on win32
Type "help", "copyright", "credits" or "license" for more information.
>>>

You have started the interpreter in “interactive mode”. That means you can enter
Python statements or expressions interactively and have them executed or
evaluated while you wait. This is one of Python’s strongest features. Check it
by entering a few expressions of your choice and seeing the results:

>>> print "Hello"
Hello
>>> "Hello" * 3
HelloHelloHello

Many people use the interactive mode as a convenient yet highly programmable
calculator. When you want to end your interactive Python session, hold the Ctrl
key down while you enter a Z, then hit the “Enter” key to get back to your
Windows command prompt.

You may also find that you have a Start-menu entry such as that results in you
seeing the >>> prompt in a new window. If so, the window will disappear
after you enter the Ctrl-Z character; Windows is running a single “python”
command in the window, and closes it when you terminate the interpreter.

If the python command, instead of displaying the interpreter prompt >>>,
gives you a message like:

'python' is not recognized as an internal or external command,
operable program or batch file.

or:

then you need to make sure that your computer knows where to find the Python
interpreter. To do this you will have to modify a setting called PATH, which is
a list of directories where Windows will look for programs.

You should arrange for Python’s installation directory to be added to the PATH
of every command window as it starts. If you installed Python fairly recently
then the command

will probably tell you where it is installed; the usual location is something
like C:\Python23. Otherwise you will be reduced to a search of your whole
disk … use or hit the Search
button and look for “python.exe”. Supposing you discover that Python is
installed in the C:\Python23 directory (the default at the time of writing),
you should make sure that entering the command

starts up the interpreter as above (and don’t forget you’ll need a “CTRL-Z” and
an “Enter” to get out of it). Once you have verified the directory, you need to
add it to the start-up routines your computer goes through. For older versions
of Windows the easiest way to do this is to edit the C:\AUTOEXEC.BAT
file. You would want to add a line like the following to AUTOEXEC.BAT:

For Windows NT, 2000 and (I assume) XP, you will need to add a string such as

to the current setting for the PATH environment variable, which you will find in
the properties window of “My Computer” under the “Advanced” tab. Note that if
you have sufficient privilege you might get a choice of installing the settings
either for the Current User or for System. The latter is preferred if you want
everybody to be able to run Python on the machine.

If you aren’t confident doing any of these manipulations yourself, ask for help!
At this stage you may want to reboot your system to make absolutely sure the new
setting has taken effect. You probably won’t need to reboot for Windows NT, XP
or 2000. You can also avoid it in earlier versions by editing the file
C:\WINDOWS\COMMAND\CMDINIT.BAT instead of AUTOEXEC.BAT.

You should now be able to start a new command window, enter python at the
C:\> (or whatever) prompt, and see the >>> prompt that indicates the
Python interpreter is reading interactive commands.

Let’s suppose you have a program called pytest.py in directory
C:\Steve\Projects\Python. A session to run that program might look like
this:

C:\> cd \Steve\Projects\Python
C:\Steve\Projects\Python> python pytest.py

Because you added a file name to the command to start the interpreter, when it
starts up it reads the Python script in the named file, compiles it, executes
it, and terminates, so you see another C:\> prompt. You might also have
entered

C:\> python \Steve\Projects\Python\pytest.py

if you hadn’t wanted to change your current directory.

Under NT, 2000 and XP you may well find that the installation process has also
arranged that the command pytest.py (or, if the file isn’t in the current
directory, C:\Steve\Projects\Python\pytest.py) will automatically recognize
the ”.py” extension and run the Python interpreter on the named file. Using this
feature is fine, but some versions of Windows have bugs which mean that this
form isn’t exactly equivalent to using the interpreter explicitly, so be
careful.

The important things to remember are:

1. Start Python from the Start Menu, or make sure the PATH is set correctly so
   Windows can find the Python interpreter.

   should give you a ‘>>>’ prompt from the Python interpreter. Don’t forget the
   CTRL-Z and ENTER to terminate the interpreter (and, if you started the window
   from the Start Menu, make the window disappear).

2. Once this works, you run programs with commands:

3. When you know the commands to use you can build Windows shortcuts to run the
   Python interpreter on any of your scripts, naming particular working
   directories, and adding them to your menus. Take a look at

   if your needs are complex.

4. Interactive mode (where you see the >>> prompt) is best used for checking
   that individual statements and expressions do what you think they will, and
   for developing code by experiment.

How do I make Python scripts executable?¶

On Windows 2000, the standard Python installer already associates the .py
extension with a file type (Python.File) and gives that file type an open
command that runs the interpreter (D:\Program Files\Python\python.exe «%1»
%*). This is enough to make scripts executable from the command prompt as
‘foo.py’. If you’d rather be able to execute the script by simple typing ‘foo’
with no extension you need to add .py to the PATHEXT environment variable.

On Windows NT, the steps taken by the installer as described above allow you to
run a script with ‘foo.py’, but a longtime bug in the NT command processor
prevents you from redirecting the input or output of any script executed in this
way. This is often important.

The incantation for making a Python script executable under WinNT is to give the
file an extension of .cmd and add the following as the first line:

@setlocal enableextensions & python -x %~f0 %* & goto :EOF

Why does Python sometimes take so long to start?¶

Usually Python starts very quickly on Windows, but occasionally there are bug
reports that Python suddenly begins to take a long time to start up. This is
made even more puzzling because Python will work fine on other Windows systems
which appear to be configured identically.

The problem may be caused by a misconfiguration of virus checking software on
the problem machine. Some virus scanners have been known to introduce startup
overhead of two orders of magnitude when the scanner is configured to monitor
all reads from the filesystem. Try checking the configuration of virus scanning
software on your systems to ensure that they are indeed configured identically.
McAfee, when configured to scan all file system read activity, is a particular
offender.

Where is Freeze for Windows?¶

“Freeze” is a program that allows you to ship a Python program as a single
stand-alone executable file. It is not a compiler; your programs don’t run
any faster, but they are more easily distributable, at least to platforms with
the same OS and CPU. Read the README file of the freeze program for more
disclaimers.

You can use freeze on Windows, but you must download the source tree (see
http://www.python.org/download/source). The freeze program is in the
Tools\freeze subdirectory of the source tree.

You need the Microsoft VC++ compiler, and you probably need to build Python.
The required project files are in the PCbuild directory.

Is a *.pyd file the same as a DLL?¶

Yes, .pyd files are dll’s, but there are a few differences. If you have a DLL
named foo.pyd, then it must have a function initfoo(). You can then
write Python “import foo”, and Python will search for foo.pyd (as well as
foo.py, foo.pyc) and if it finds it, will attempt to call initfoo() to
initialize it. You do not link your .exe with foo.lib, as that would cause
Windows to require the DLL to be present.

Note that the search path for foo.pyd is PYTHONPATH, not the same as the path
that Windows uses to search for foo.dll. Also, foo.pyd need not be present to
run your program, whereas if you linked your program with a dll, the dll is
required. Of course, foo.pyd is required if you want to say import foo. In
a DLL, linkage is declared in the source code with __declspec(dllexport).
In a .pyd, linkage is defined in a list of available functions.

How can I embed Python into a Windows application?¶

Embedding the Python interpreter in a Windows app can be summarized as follows:

1. Do _not_ build Python into your .exe file directly. On Windows, Python must
   be a DLL to handle importing modules that are themselves DLL’s. (This is the
   first key undocumented fact.) Instead, link to pythonNN.dll; it is
   typically installed in C:\Windows\System. NN is the Python version, a
   number such as “23” for Python 2.3.

   You can link to Python in two different ways. Load-time linking means
   linking against pythonNN.lib, while run-time linking means linking
   against pythonNN.dll. (General note: pythonNN.lib is the
   so-called “import lib” corresponding to pythonNN.dll. It merely
   defines symbols for the linker.)

   Run-time linking greatly simplifies link options; everything happens at run
   time. Your code must load pythonNN.dll using the Windows
   LoadLibraryEx() routine. The code must also use access routines and data
   in pythonNN.dll (that is, Python’s C API’s) using pointers obtained
   by the Windows GetProcAddress() routine. Macros can make using these
   pointers transparent to any C code that calls routines in Python’s C API.

   Borland note: convert pythonNN.lib to OMF format using Coff2Omf.exe
   first.

2. If you use SWIG, it is easy to create a Python “extension module” that will
   make the app’s data and methods available to Python. SWIG will handle just
   about all the grungy details for you. The result is C code that you link
   into your .exe file (!) You do _not_ have to create a DLL file, and this
   also simplifies linking.

3. SWIG will create an init function (a C function) whose name depends on the
   name of the extension module. For example, if the name of the module is leo,
   the init function will be called initleo(). If you use SWIG shadow classes,
   as you should, the init function will be called initleoc(). This initializes
   a mostly hidden helper class used by the shadow class.

   The reason you can link the C code in step 2 into your .exe file is that
   calling the initialization function is equivalent to importing the module
   into Python! (This is the second key undocumented fact.)

4. In short, you can use the following code to initialize the Python interpreter
   with your extension module.

   #include "python.h"
   ...
   Py_Initialize();  // Initialize Python.
   initmyAppc();  // Initialize (import) the helper class.
   PyRun_SimpleString("import myApp") ;  // Import the shadow class.
   

5. There are two problems with Python’s C API which will become apparent if you
   use a compiler other than MSVC, the compiler used to build pythonNN.dll.

   Problem 1: The so-called “Very High Level” functions that take FILE *
   arguments will not work in a multi-compiler environment because each
   compiler’s notion of a struct FILE will be different. From an implementation
   standpoint these are very _low_ level functions.

   Problem 2: SWIG generates the following code when generating wrappers to void
   functions:

   Py_INCREF(Py_None);
   _resultobj = Py_None;
   return _resultobj;
   

   Alas, Py_None is a macro that expands to a reference to a complex data
   structure called _Py_NoneStruct inside pythonNN.dll. Again, this code will
   fail in a mult-compiler environment. Replace such code by:

   return Py_BuildValue("");
   

   It may be possible to use SWIG’s %typemap command to make the change
   automatically, though I have not been able to get this to work (I’m a
   complete SWIG newbie).

6. Using a Python shell script to put up a Python interpreter window from inside
   your Windows app is not a good idea; the resulting window will be independent
   of your app’s windowing system. Rather, you (or the wxPythonWindow class)
   should create a “native” interpreter window. It is easy to connect that
   window to the Python interpreter. You can redirect Python’s i/o to _any_
   object that supports read and write, so all you need is a Python object
   (defined in your extension module) that contains read() and write() methods.

How do I use Python for CGI?¶

On the Microsoft IIS server or on the Win95 MS Personal Web Server you set up
Python in the same way that you would set up any other scripting engine.

Run regedt32 and go to:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W3SVC\Parameters\ScriptMap

and enter the following line (making any specific changes that your system may
need):

.py :REG_SZ: c:\<path to python>\python.exe -u %s %s

This line will allow you to call your script with a simple reference like:
http://yourserver/scripts/yourscript.py provided “scripts” is an
“executable” directory for your server (which it usually is by default). The
-u flag specifies unbuffered and binary mode for stdin — needed when
working with binary data.

In addition, it is recommended that using ”.py” may not be a good idea for the
file extensions when used in this context (you might want to reserve *.py
for support modules and use *.cgi or *.cgp for “main program” scripts).

In order to set up Internet Information Services 5 to use Python for CGI
processing, please see the following links:

Configuring Apache is much simpler. In the Apache configuration file
httpd.conf, add the following line at the end of the file:

ScriptInterpreterSource Registry

Then, give your Python CGI-scripts the extension .py and put them in the cgi-bin
directory.

How do I keep editors from inserting tabs into my Python source?¶

The FAQ does not recommend using tabs, and the Python style guide, PEP 8,
recommends 4 spaces for distributed Python code; this is also the Emacs
python-mode default.

Under any editor, mixing tabs and spaces is a bad idea. MSVC is no different in
this respect, and is easily configured to use spaces: Take , and for file type “Default” set “Tab size” and “Indent
size” to 4, and select the “Insert spaces” radio button.

If you suspect mixed tabs and spaces are causing problems in leading whitespace,
run Python with the -t switch or run Tools/Scripts/tabnanny.py to
check a directory tree in batch mode.

How do I check for a keypress without blocking?¶

Use the msvcrt module. This is a standard Windows-specific extension module.
It defines a function kbhit() which checks whether a keyboard hit is
present, and getch() which gets one character without echoing it.

How do I emulate os.kill() in Windows?¶

Prior to Python 2.7 and 3.2, to terminate a process, you can use ctypes:

import ctypes

def kill(pid):
    """kill function for Win32"""
    kernel32 = ctypes.windll.kernel32
    handle = kernel32.OpenProcess(1, 0, pid)
    return (0 != kernel32.TerminateProcess(handle, 0))

In 2.7 and 3.2, os.kill() is implemented similar to the above function,
with the additional feature of being able to send CTRL+C and CTRL+BREAK
to console subprocesses which are designed to handle those signals. See
os.kill() for further details.

cgi.py (or other CGI programming) doesn’t work sometimes on NT or win95!¶

Be sure you have the latest python.exe, that you are using python.exe rather
than a GUI version of Python and that you have configured the server to execute

for the CGI execution. The -u (unbuffered) option on NT and Win95
prevents the interpreter from altering newlines in the standard input and
output. Without it post/multipart requests will seem to have the wrong length
and binary (e.g. GIF) responses may get garbled (resulting in broken images, PDF
files, and other binary downloads failing).

Why doesn’t os.popen() work in PythonWin on NT?¶

The reason that os.popen() doesn’t work from within PythonWin is due to a bug in
Microsoft’s C Runtime Library (CRT). The CRT assumes you have a Win32 console
attached to the process.

You should use the win32pipe module’s popen() instead which doesn’t depend on
having an attached Win32 console.

Example:

import win32pipe
f = win32pipe.popen('dir /c c:\\')
print f.readlines()
f.close()

Why doesn’t os.popen()/win32pipe.popen() work on Win9x?¶

There is a bug in Win9x that prevents os.popen/win32pipe.popen* from
working. The good news is there is a way to work around this problem. The
Microsoft Knowledge Base article that you need to lookup is: Q150956. You will
find links to the knowledge base at: http://support.microsoft.com/.

PyRun_SimpleFile() crashes on Windows but not on Unix; why?¶

This is very sensitive to the compiler vendor, version and (perhaps) even
options. If the FILE* structure in your embedding program isn’t the same as is
assumed by the Python interpreter it won’t work.

The Python 1.5.* DLLs (python15.dll) are all compiled with MS VC++ 5.0 and
with multithreading-DLL options (/MD).

If you can’t change compilers or flags, try using Py_RunSimpleString().
A trick to get it to run an arbitrary file is to construct a call to
execfile() with the name of your file as argument.

Also note that you can not mix-and-match Debug and Release versions. If you
wish to use the Debug Multithreaded DLL, then your module must have an “_d”
appended to the base name.

Importing _tkinter fails on Windows 95/98: why?¶

Sometimes, the import of _tkinter fails on Windows 95 or 98, complaining with a
message like the following:

ImportError: DLL load failed: One of the library files needed
to run this application cannot be found.

It could be that you haven’t installed Tcl/Tk, but if you did install Tcl/Tk,
and the Wish application works correctly, the problem may be that its installer
didn’t manage to edit the autoexec.bat file correctly. It tries to add a
statement that changes the PATH environment variable to include the Tcl/Tk ‘bin’
subdirectory, but sometimes this edit doesn’t quite work. Opening it with
notepad usually reveals what the problem is.

(One additional hint, noted by David Szafranski: you can’t use long filenames
here; e.g. use C:\PROGRA~1\Tcl\bin instead of C:\Program Files\Tcl\bin.)

Missing cw3215mt.dll (or missing cw3215.dll)¶

Sometimes, when using Tkinter on Windows, you get an error that cw3215mt.dll or
cw3215.dll is missing.

Cause: you have an old Tcl/Tk DLL built with cygwin in your path (probably
C:\Windows). You must use the Tcl/Tk DLLs from the standard Tcl/Tk
installation (Python 1.5.2 comes with one).

Warning about CTL3D32 version from installer¶

The Python installer issues a warning like this:

This version uses CTL3D32.DLL which is not the correct version.
This version is used for windows NT applications only.

Tim Peters:

This is a Microsoft DLL, and a notorious source of problems. The message
means what it says: you have the wrong version of this DLL for your operating
system. The Python installation did not cause this – something else you
installed previous to this overwrote the DLL that came with your OS (probably
older shareware of some sort, but there’s no way to tell now). If you search
for “CTL3D32” using any search engine (AltaVista, for example), you’ll find
hundreds and hundreds of web pages complaining about the same problem with
all sorts of installation programs. They’ll point you to ways to get the
correct version reinstalled on your system (since Python doesn’t cause this,
we can’t fix it).

David A Burton has written a little program to fix this. Go to
http://www.burtonsys.com/downloads.html and click on “ctl3dfix.zip”.

The Python for Windows Extensions