When you are enjoying your favorite song via Bluetooth headphones, the sound may sometimes be cut off without any reason. At this moment, you may feel infuriated and you may adjust your Bluetooth positions and angles, yet the Bluetooth audio stuttering continues to happen. Even though your Bluetooth headphones are fully charged, you cannot use them if it has any internal issues or if there are any incompatible audio settings on your Windows 10 computer. Don’t worry! You are not the only one who faces Bluetooth headphones stuttering Windows 10 issues. We have some effective amazing fixes for you that will bring your computer out of the trouble. So, continue reading.
Table of Contents
Here are some common reasons that cause Bluetooth audio stuttering issues on Windows 10. Analyze them deeply to find out the exact cause in your case.
- Bluetooth battery is running low.
- Bluetooth device is far away from the signal source.
- Signal mismatch.
- Human body is interfering with the Bluetooth signal.
- One or more Bluetooth devices are on at the same time.
- Outdated firmware.
- Outdated Operating System and incompatible audio drivers.
- Time to upgrade; headphones are age-old!
In this section, we have compiled a list of methods that help you troubleshoot Bluetooth headphones stuttering Windows 10 issues. Firstly check and fix the hardware problems and then move ahead to Windows troubleshooting methods as instructed below.
Method 1: Charge Bluetooth Battery
You may sometimes analyse when Bluetooth headphones lose charge, the audio may turn out choppy. In this case, you have to charge your Bluetooth device and always make sure there is a minimum level of power to avoid any audio problems.
In some latest Bluetooth devices, the battery level can be identified by colour code. For example, in the OnePlus Earbuds,
- Green – Indicates battery level is optimum for use.
- Red – Indicates battery level is very low and needs charging.
So, what if the battery level is adequate, but still facing Bluetooth headphones stuttering Windows 10? Check and try the following methods!
Method 2: Maintain Bluetooth Signal Range
Bluetooth devices make use of short wave radio signals and when you are out of range, you cannot hear the audio properly and the audio disconnects later. Your Bluetooth device manufacturer would have mentioned the signal range of your device on the package. Check it out or browse the internet to find out the coverage range. Then, maintain the same distance as mentioned. Check if this works.
Also Read: How to Install Bluetooth on Windows 10
Method 3: Avoid Cross Body Interference
You may sometimes face Bluetooth headphones stuttering Windows 10 when you are keeping one of the Bluetooth devices on your pant trousers or your palm and the other on your ear.
This may be due to the 70% + water content in your body. Bluetooth radio waves travel very bad over waterlogging substances, if you are in this situation, please change the position of Bluetooth devices.
Method 4: Remove Problematic Obstructions
Similarly, if there are any metallic interruptions, Bluetooth waves bounce out and you may face Bluetooth audio stuttering issue on your Windows 10 PC. Likewise, if there is any reinforced concrete (such as a wall) substance between your computer and Bluetooth device, you may face audio stuttering issues. You are advised to remove these obstructions and sit near your Bluetooth device and computer.
Method 5: Avoid Placing Devices with High Wi-Fi Range
Several modern wireless devices like smart bulbs, high range routers, cordless phones, Wi-Fi routers, and monitors employ high Wi-Fi range signals, and some may even work with 2.4 GHz – 2.5Ghz.
Also, if you are using a Bluetooth device, avoid Wi-Fi interferences in the transmission paths. In addition to this, remove extra Bluetooth connections connected to your computer and check if you face the problem again.
Method 6: Use USB Cable (For Bluetooth Dongle Users)
In some cases, electrical interference between the module of your motherboard and your Bluetooth device may cause Bluetooth audio stuttering issue. This problem can be resolved by increasing the distance between the USB dongle and the USB port on Windows 10.
Also Read: How to Rename Bluetooth Devices on Windows 10
Method 7: Reconnect Bluetooth
As of now, you have followed hardware troubleshooting methods to fix Bluetooth headphones stuttering Windows 10 issue. Still, if you did not attain any fix, then the problem is not with your hardware. To troubleshoot temporary problems associated with your Bluetooth device and your computer, turn off the Bluetooth and turn it on again after some time as instructed below.
1. Press the Windows key and type Bluetooth settings, then hit Enter key.
2. Now, toggle off the Bluetooth icon as shown.
3. Wait for a while and toggle ON the same setting again.
Check if you have fixed Bluetooth audio stuttering issue on Windows 10.
Method 8: Select Correct Audio Output
When you are using more than one audio output device, you have to confirm whether Bluetooth device is used up as an output device. To check the audio output in your Windows 10 PC, follow the below-mentioned steps.
1. Click on the Speakers icon at the right corner of the Taskbar.
2. Now, click on the arrow icon to expand the list of audio devices connected to the computer.
3. Then, select the audio device (your Bluetooth device) and make sure the audio is playing through the selected device.
If this method doesn’t help you, move ahead to the next one.
Also Read: How to Fix Bluetooth problems in Windows 10
Method 9: Run Bluetooth Troubleshooter
Your Windows 10 computer has a built-in troubleshooter to fix many common problems arising from it. Likewise, you can fix Bluetooth headphones stuttering Windows 10 issue by running Bluetooth troubleshooter as instructed below.
1. Press the Windows key, type Troubleshoot settings, and click on Open.
2. Scroll down to the Find and fix other problems section.
3. Here, select Bluetooth and click on Run the troubleshooter option.
4. Windows will start Detecting problems. If there are any problems detected then follow on-screen instructions to Apply the fix.
Method 10: Change Wi-Fi Bands
As discussed earlier, Bluetooth audio stuttering happens due to interference between two different wireless devices using the same frequency. To confirm this, you can take a simple hack of turning off your Wi-Fi router. After your Wi-Fi router is completely turned off check if you can fix Bluetooth headphones stuttering Windows 10 issue. If so, the problem is due to Wi-Fi and Bluetooth signal interferences. In this case, you can try switching between 2.4GHz and 5GHz Wi-Fi bands on your Windows 10 computer as instructed below.
1. Hit the Windows key, type device manager, and click on Open.
2. Double-click on Network adapters to expand the network drivers.
3. Then, right-click on your Wi-Fi adapter and click on Properties.
4. Now, search for the Band or Preferred Band option in the Property menu and click on it.
5. Now, expand the drop-down menu of the Value field and set the value as Prefer 5GHz band as shown. Then, click on OK to save the changes.
Note: If the value is already set to Prefer 5GHz band, then change the value to Prefer 2.4GHz and click on OK.
6. Finally, restart your PC and check if you have fixed Bluetooth audio stuttering issue.
Also Read: Fix Bluetooth can’t turn off on Windows 10
Method 11: Re-enable Bluetooth Sound Card
You can easily resolve Bluetooth headphones stuttering Windows 10 issue by restarting the Bluetooth sound card as instructed below.
1. Hit the Windows key and type Device Manager, then click on Open.
2. Then, expand the Bluetooth section by double-clicking on it.
3. Then, right-click on your Bluetooth sound card and select the Disable device option.
4. Now, confirm the prompt by clicking on Yes and reboot your PC. Then, repeat Steps 1-2.
5. Next, right-click on your Bluetooth sound card and select the Enable device option.
6. Now, try playing any sound on Bluetooth device and check if the issue is resolved or not.
Method 12: Repair Corrupt Files
For perfect audio quality services, a few essential files and programs must be functioning on your PC. But, if they are corrupt or misconfigured, you will face Bluetooth audio stuttering issues. Fortunately, all these corrupt misconfigured files can be repaired by using the inbuilt utilities of your Windows 10 PC namely, System File Checker and Deployment Image Servicing and Management. Read our guide on How to Repair System Files on Windows 10 and follow the steps as instructed to repair all your corrupt files.
Wait for the commands to be executed and check if you have fixed bluetooth issue on your PC.
Also Read: Fix Bluetooth Driver Error in Windows 10
Method 13: Restart Bluetooth Audio Services
A few essential Windows audio services will help you prevent Bluetooth audio stuttering issues in your Windows 10 PC. If in case, if these services are turned off, you may face several conflicts. Hence, you are advised to restart a few essential audio services as instructed below steps.
1. Press the Windows key, type Services, and click on Run as administrator.
2. Now, scroll down and double-click on the Bluetooth Support Service.
3. Now, in the new pop-up window, select the Startup type to Automatic, as depicted.
Note: If the Service status is Stopped, then click on the Start button. If the Service status is Running, click on Stop and Start it again.
4. Click on Apply > OK to save the changes.
Method 14: Disable Audio Enhancements
If you find your audio working well for other multimedia resources, but the sound seems to be of low quality or noisy, you are advised to change the sample rate. A low-frequency sample rate will cause Bluetooth audio stuttering issue, yet you can select a higher frequency sample rate by following the below-mentioned steps.
1. Right-click on the Speakers icon at the bottom right corner of the screen and select the Sounds option.
2. Then, switch to the Playback tab and select the default Bluetooth audio device followed by the Properties button as shown.
3. Then, switch to the Advanced tab and from the drop-down menu under Default Format, make sure you select the highest frequency range (16 bit, 44100 Hz).
4. Now, switch to the Enhancements tab and check the box corresponding to Disable all enhancements as shown.
5. Click on Apply and then OK to save the changes. Check if you face Bluetooth audio stuttering issue again. If so, adjust different levels of frequency ranges by repeating these steps and confirm which range solves the problem.
Also Read: Fix Windows 10 Audio Crackling
Method 15: Disable Remote Control and Hands-free Telephony
Hands-free telephony is a Windows service that is used to enable your Bluetooth device to answer phone calls. But, it sometimes reduces the sound quality of your voice signal contributing to Bluetooth audio stuttering issue. Similarly, the Remote Control feature also has its own disadvantages. If you wonder how to fix Bluetooth stuttering amidst these features, here are a few troubleshooting instructions.
1. Hit the Windows key and type Control Panel, then click on Open.
2. Now, click on the View devices and printers link as shown.
3. Now, right-click on your Bluetooth device and click on Properties as shown.
4. In the next window, switch to the Services tab and uncheck the boxes, Hands-free Telephony and Remote Control as depicted.
5. Finally, click on Apply > OK to save the changes.
Method 16: Adjust Roaming Aggressiveness Settings
The Roaming Aggressiveness settings in your computer change the signal strength threshold at which Wi-Fi network adapters scan for other Access Point candidates to offer a better signal connection. But, when this setting is fixed to the highest setting, you will face Bluetooth headphones stuttering Windows 10 issue. You are advised to turn off the setting as instructed below.
1. Launch the Device manager from Windows Search.
2. Double-click on Network adapters to expand the network drivers.
3. Then, right-click on your Wi-Fi adapter and click on Properties.
4. Now, search for the Roaming Aggressiveness option in the Property list and click on it.
5. Now, set the Value to Lowest and click on OK.
Check if you have fixed Bluetooth audio stuttering issue.
Also Read: Fix Windows 10 Bluetooth Mouse Lag
Method 17: Disable Bluetooth Collaboration (If Applicable)
Broadcom Network adapter is software that helps your Bluetooth device to be connected to the internet. But this setting may interfere with your device settings causing the discussed problem. If you want to know how to fix Bluetooth stuttering by turning off this setting, please follow the below-listed instructions.
1. Open Device Manager and go to Network adapters, then right-click on your network driver and select Properties.
2. Now, switch to the Advanced tab and click on Bluetooth Collaboration under the Property list.
3. Then, expand the Value drop-down list and click on Disabled.
4. Finally, click on OK to save the changes and check if you have fixed the issue.
Method 18: Update Bluetooth Drivers
Outdated and incompatible Bluetooth drivers will always result in Bluetooth headphones stuttering Windows 10 issue. Always ensure you use an updated version of drivers and if your computer lacks the latest drivers, you are advised to update them as instructed in our guide How to Update Realtek HD Audio Drivers in Windows 10.
Note: Make sure you follow the same steps for Bluetooth Audio drivers as depicted below.
Once you have updated your Bluetooth drivers to the latest version.
Also Read: What is a Device Driver? How Does It Work?
Method 19: Reinstall Bluetooth Drivers
Incompatible drivers must be reinstalled to resolve all audio related problems. You are advised to reinstall device drivers only if you cannot attain any fix by updating them. Steps to reinstall drivers are very easy and you can do so by using a third-party application or by implementing the steps manually as instructed in our guide How to Uninstall and Reinstall Drivers on Windows 10. Follow the steps corresponding to Bluetooth drivers as depicted.
After reinstalling the audio drivers, check if you can hear the audio on your Bluetooth device.
Method 20: Roll Back Bluetooth Driver Updates
Sometimes, the current version of audio drivers may cause any audio conflicts and in this case, you have to restore previous versions of installed drivers. This process is called rollback of drivers and you can easily roll back your computer drivers to their previous state by following our guide How to Rollback Drivers on Windows 10.
Wait until the previous versions of drivers are installed on your Windows 10 PC. Once done, check if you have fixed the issue.
Method 21: Update Windows
If there are any new Microsoft updates pending to be installed on your PC, a few bugs and problems cannot be resolved on your computer. As suggested by many users, updating Windows 10 computers will help you resolve Bluetooth audio stuttering issue. Follow our guide How to Download and Install Windows 10 Latest Update to update your Windows 10 computer.
After updating your Windows Operating System, check whether you can access audio on Bluetooth device.
Also Read: How to Boost the Bass of Headphones and Speakers in Windows 10
Method 22: Reset Bluetooth Device
Still, if you are thinking about how to fix Bluetooth stuttering issue even after trying all these troubleshooting steps, then you must try factory resetting your device. The resetting process of many headphones involves pressing the power button for a particular extent of time. The steps to reset your device depends on the model you are using and for detailed instructions, follow the below-mentioned steps.
Note: Ensure you are within the Bluetooth signal range. Remove all other wireless devices connected to your computer, especially Wi-Fi devices.
1. Disconnect your Bluetooth device from Windows 10 PC.
2. Now, press and hold the Power button of your Bluetooth device for about 7 to 10 seconds.
3. A flash occurs (probably blue light) about 4 times.
4. Now all the settings and pairing information will be removed from your device.
5. Pair your device again and check if Bluetooth headphones stuttering Windows 10 issue is fixed now.
Note: Ensure you are within the Bluetooth signal range. Remove all other wireless devices connected to your computer, especially Wi-Fi devices.
Method 23: Update Device Firmware
Firmware updates are released to resolve the problems and struggles reported on Bluetooth devices. You can update the firmware via apps and there are so many online platforms to support you in this process. If you have bought your Bluetooth device, seek professional support via email, since that’s the only means you can go for. On the other hand, if you have bought your Bluetooth device from a retail store, take your shoes and run to seek help from the retailer.
Recommended:
- Fix Minecraft Black Screen in Windows 10
- Fix Logitech Unifying Receiver Not Working in Windows 10
- How to Mute an App on Windows 10
- Fix Windows 10 Audio Error 0xc00d4e86
We hope that this guide was helpful and you could fix bluetooth headphones stuttering on Windows 10. Feel free to reach out to us with your queries and suggestions via the comments section below.
Solved bluetooth audio stuttering / drop outs in windows 10 bootcamp
Hopefully this will help others, it worked for me after trying almost everything on the internet.
Make sure you’re on a 5gHz WiFi and not 2,5!!
In windows:
Go to settings —>devices —>Devices and printers (on the far right!)
Rightclick your headphones.
properties.
Services tab
Turn OFF Hands free Telephony.
—
Hopefully this works for you as well.
MacBook Pro 15″,
macOS 10.14
Posted on Jun 17, 2020 6:25 AM
Similar questions
-
Bluetooth in Bootcamp
Bluetooth in Bootcamp is not functional. It does not allow for more than one wireless controller to connect at a time and, when using wireless headphones, audio cuts in an out the moment a second Bluetooth device is connected.In device manager, I do not have anything titled «Apple Broadcom Built-in Bluetooth» nor do I have an option for bluetooth collaboration under advanced settings for Broadcom Network Adapter. I have tried using version .3 and .4 of broadcom driver to no avail. Below are screenshots from device manager.
I was on the phone with Apple Support and they say that they are not responsible for fixing this, and that I should talk to Microsoft. Microsoft was also unable to help me. I have tried updating windows, updating Bootcamp, reinstalling Bootcamp drivers from usb, and fresh install of Windows. Nothing’s worked.
Any help would be appreciated.
Background info:
MacBook Pro 16″: Core-i9 2.3GHz, 32GB Memory, Radeon Pro 5500M 8GB1790
6
-
Bluetooth under bootcamp Win10 : Wifi with Headset and mouse unstable
Hello, i have a problem under windows10+bootcamp with mouse Logitech m535 and headset beats studio 3.
I have notice that if both it’s connected audio is stutter . I just solved the problem with wifi interference using 5GHz Wifi for network… but if I connect mouse audio on the beats studio stutter .I have try everything on google . I don’t know why (actually..worst windows driver?)under macosx it’s everything PERFECT.
1167
12
-
MacBook Pro MV912LL/A Bluetooth sound issues windows 10
I just purchased a new MacBook Pro MV912LL/A. I installed windows 10 using bootcamp and I paired a bluetooth soundbar but I am noticing it cuts off every 20-25 seconds where as it works fine with other windows laptops. It even works fine when I boot into Mac partition.
941
9
Jun 17, 2020 8:56 AM in response to grottloffe
Some users need to stay on 2.4G, because their access points do not offer 5G. The BT/WiFI interference is meant to be automatically managed in the 2018 and later Macs. Older drivers (7.35 series) allow setting it manually.
If macOS works properly, then the issues are related to the Windows drivers.
This thread has been closed by the system or the community team.
You may vote for any posts you find helpful, or search the Community for additional answers.
Solved bluetooth audio stuttering / drop outs in windows 10 bootcamp
Купил себе Bose NC 700. Сами по себе наушники замечательные. Шумодав прекрасный, наушники удобные, всё супер. С телефоном по Bluetooth работает прекрасно, как и с моим Linux ноутбуком.
Однако, когда я подключаю их к моему ПК на Windows — начинаются прерывания. Сидишь, смотришь такой видосик на ютубе спокойно, в друг раз — звук прервался на пол секунды, потом захрипел немножко, потом ещё минуту всё нормально, потом снова. Это происходит абсолютно в рандомные моменты времени, и ТОЛЬКО с моим ПК на винде (Из чего делаю вывод, что сами уши в порядке)
Пробовал отключать их от моего телефона, с которым он работает в режиме Multipoint — не помогает. Пробовал сбрасывать их — безуспешно. Сносил и заново устанавливал драйвера — не помогает. Ставил Alternative A2DP Driver — пробовал выбирать разные кодеки и разные настройки — ничего не меняется.
Грешил на слабый Bluetooth у компа — но он работает отлично (Комп стоит над столом, приёмник и наушники находятся в прямой видимости, да и выход в другие комнаты ничего не меняет — как прерывалось в рандомные моменты, так и прерывается, что в 40 см от компа, что за дверью + двумя бетонными стенами)
Так же, отключал другие bluetooth устройства поблизости — ситуацию это не меняет ни сколько.
Кто-нибудь сталкивался с такой проблемой? Есть версии, что ещё можно попробовать, чтобы винда наконец начала нормально работать?
UPD.
Покупка нового Bluetooth донгла помогла. Дело было в Bluetooth модуле, вшитом в мтеринку
Say you’re watching a movie or playing a game on your Windows PC. The visual quality is top-notch, and everything looks great. Except for one thing: there’s an annoying delay in audio output to your Bluetooth speaker. You reload a rifle, but your Bluetooth headphones produce the sound effect some seconds (or microseconds) later. There’s no audio-visual agreement, and everything is out-of-sync. How do you fix this?
First, check whether Airplane Mode is disabled or turned off. You could also try restarting your computer. If the Bluetooth device’s audio production is still not in sync with the on-screen visual, try the six (6) troubleshooting solutions listed below. We’re confident that at least one of them will help resolve the Bluetooth delay issue on your Windows 10 PC.
1. Troubleshoot Proximity & Interference Issues
Distance plays an important role in determining audio quality with wireless Bluetooth devices. Make sure your computer and the Bluetooth audio device are both within range. You should also check that there isn’t any form of physical obstruction (a wall, for example) between your PC and the audio device. This could interfere with the Bluetooth connection and result in an audio delay.
Speaking of interference, check that the audio device isn’t close to another device plugged to your PC’s USB 3.0 port. Microsoft warns that this could disrupt the transmission of the audio signal via Bluetooth. If, for example, you’re experiencing audio delay while using a Bluetooth speaker that’s nearby your PC’s USB port, move the speaker away and check if that fixes the issue.
We recommend checking out Microsoft’s official guide on fixing Bluetooth problems in Windows 10.
2. Reconnect Bluetooth Device
Launch the Bluetooth settings menu on your PC (Settings > Devices > Bluetooth & other devices) and toggle off Bluetooth. Wait for a couple of seconds, and toggle re-enable Bluetooth.
Alternatively, you could also disconnect the Bluetooth device manually. Click the Bluetooth device with audio delay issues and select Disconnect.
Reconnect the device to your PC (tap the Connect button) and check if that fixes the audio synchronization issue.
3. Troubleshoot Connected Device
If you’re experiencing audio delay, poor audio quality, and other related issues while playing audio via Bluetooth, the Windows Audio Troubleshooter could fix the issue.
Step 1: Launch the Settings menu and select System.
Step 2: Go to the Sound section and tap the Troubleshoot button.
That will launch the audio troubleshooter in a new window. Wait till the tool diagnoses your audio devices and proceed to the next step.
Step 3: Select the Bluetooth device with the audio delay issue and click Next.
The troubleshooter will further diagnose the device and immediately recommend solutions—if it detects any problem affecting its audio production and quality. Follow the recommended prompt, and see if that helps. Proceed to the next solution if the troubleshooter doesn’t find any problem with the Bluetooth device.
4. Run Bluetooth Troubleshooter
This is another built-in tool that can help detect and fix issues affecting your Windows PC’s Bluetooth performance.
Step 1: Launch the Windows Settings and select ‘Update & Security.’
Step 2: Go to the Troubleshoot menu.
Step 3: In the ‘Find and fix other problems’ section, select Bluetooth, and click the ‘Run the troubleshooter’ button.
That will launch the Windows Bluetooth troubleshooter. The tool will diagnose your PC and attempt to automatically fix any Bluetooth-related glitch it detects. Meanwhile, all active Bluetooth devices hooked to your PC will be disconnected (and reconnected). You don’t have to worry, though; this won’t mess with your device’s settings.
The troubleshooter will notify you of the Bluetooth problems it diagnosed and fixed. Try playing a media file (preferably a video) on your computer and check if the audio delay issue has been eliminated.
5. Check Bluetooth Device
Sometimes, the issues could be from the connected Bluetooth device, not your PC. If the device is battery-powered (perhaps a wireless headphone or portable speaker), check that it is sufficiently charged. You could also try restarting or resetting the device. Refer to the device’s instruction manual to learn how to troubleshoot connectivity and playback issues.
6. Disable Audio Enhancements
Tinkering with Audio Enhancements might help you get louder & better sound on your PC—for wired and wireless devices. However, these enhancements sometimes result in audio distortion, audio delay, and other issues. Follow the steps below to disable all Audio Enhancements for the affected Bluetooth device.
Step 1: Go to the Windows Sound settings menu (Settings > System > Sound).
Step 2: Check that the affected Bluetooth device is the selected Output device. Click Device properties to continue.
That will launch the Properties page for the Bluetooth device.
Step 3: Scroll to the bottom of the page and click ‘Additional device properties.’
Step 4: On the new window, navigate to the Enhancements tab. Check the ‘Disable all enhancements’ box and tap OK to save the changes.
Sync Things Up
To add to the solutions above, we recommend restarting the program/app you’re experiencing the audio delay on. If it’s a game, close and relaunch it. And if the issue is peculiar to videos, restart the media player or use an alternate app. Finally, you should also check that your PC’s Bluetooth driver and operating system are up-to-date.
Next up: Can’t find the Bluetooth icon/option on your Windows 10 PC? Read this tutorial linked below to learn 8 ways to fix Bluetooth missing from Device Manager issue.
Was this helpful?
Thanks for your feedback!
The article above may contain affiliate links which help support Guiding Tech. The content remains unbiased and authentic and will never affect our editorial integrity.
One of the biggest reasons people consider wired earphones over Bluetooth ones is that sometimes they experience sound delays. However, this problem can be easily fixed with some little settings tweaks. In this article, we will discuss all the possible solutions to fix Bluetooth sound delay in Windows 11/10.
These are the things you can do to fix Bluetooth sound delay in Windows 11/10:
- Clear all the obstructions
- Reconnect your Bluetooth device
- Run Troubleshooters
- Connect one device at a time
- Disable Audio Enhancements
- Update Bluetooth Drivers
- Restart Windows Audio Service
How to fix sound delay and audio lag on Bluetooth in Windows 11/10
1] Clear all the obstructions
Bluetooth signals are nothing but waves, it uses short-wavelength UHF radio waves to communicate. So, it is normal for it to get distorted because of obstructions.
Therefore, you need to make sure there is no obstruction between your computer (or the source to which Bluetooth is connected) and the Bluetooth device.
Another thing you need to consider is the distance between the computer and Bluetooth if it’s too long, you will experience a sound delay.
2] Reconnect your Bluetooth device
If the first solution didn’t apply to you then start from here. The simplest way to fix the issue would be to reconnect your Bluetooth device.
To do that, hit Win + X > Settings. Now, click on Devices, your Bluetooth device, and then Disconnect.
Now, click on the Connect button to reconnect your Bluetooth device. If the delay is because of any glitch then this will fix the issue for you.
You can even restart your computer’s Bluetooth by using the toggle from the same window.
Read: Bluetooth Headphones not working.
3] Run Troubleshooters
Microsoft has built one of the best troubleshooting software in the market and in this section, we are going to use that to our advantage.
To troubleshoot your audio device, hit Win + X > Settings. Now, click on Update & Security > Troubleshoot > Additional troubleshooters > Playing Audio > Troubleshoot.
A wizard will ask you to select the Audio Device, select, and click Next. Your problem will be detected and hopefully, fixed.
To troubleshoot Bluetooth, open Settings and click Update & Security > Troubleshoot > Additional troubleshooters > Bluetooth > Troubleshoot.
Finally, follow the on-screen instructions to run this fix the issue.
You may want to also run the Bluetooth Troubleshooter from the same page.
4] Connect one device at a time
Most of us have two or three devices paired to a single Bluetooth headset or speaker. And when we start our Bluetooth device, it connects to all the devices automatically. Because of this, you may experience audio lag. Therefore, you need to make sure that your Bluetooth is connected to one device at a time.
Read: Bluetooth devices not showing, pairing or connecting.
5] Disable Audio Enhancements
Even though, audio enhancements can improve your listening experience by enhancing certain notes. However, this feature can also make your audio distort and lag. Therefore, to fix the Bluetooth sound delay in Windows 10 we are going to disable Audio Enhancements.
To do that, follow the prescribed steps:
- Launch Settings by Win + X > Settings.
- Click System > Sound > Device properties> Additional device properties.
- Now, go to the Enhancements tab, tick Disable all enhancements and click Apply > Ok.
6] Update Bluetooth Driver
This solution can be applied to any Bluetooth-related problem. An outdated driver can cause a lot of trouble for you and Bluetooth sound delay is one of them. Therefore, we need to update our Bluetooth driver.
To do that, launch Device Manager from the Start Menu. Expand Bluetooth, right-click on your device, and select Update driver. A wizard will ask you to either select Search automatically for drivers or Browse my computer for drivers, select the former one if you want the computer to search the web for an updated driver, and latter if you have already downloaded the updated driver on your computer.
After updating the driver, try restarting your computer to fix the Bluetooth sound delay issue.
7] Restart Windows Audio Service
If you are still not able to fix the Bluetooth sound delay issue then try restarting Windows Audio Service.
To do that, launch Services from the Start Menu, scroll down a bit, right-click on Windows Audio, select Restart, and click Yes to confirm.
Finally, restart your computer, connect to the Bluetooth device and enjoy.
Read: Troubleshoot Windows Sound and Audio problems.
Hopefully, this has helped you fix the Bluetooth sound delay in Windows 11/10.