Поиск сетей wifi windows 10

If you have a problem with Windows 10 not showing Wifi networks in the available networks list, it can be due to several issues.

There are several solutions to this problem. We discuss 9 ways to fix Windows 10 not showing Wifi networks in this article.

Restart the WiFi network adapter

Network adapter caches have been known to cause problems in the network’s performance in Windows 10. Sometimes they need to be cleared or reset in order for them to perform as usual.

1. Right-click on the WiFi icon in the Notification Tray in the bottom-right corner of the screen, and click on open network and internet settings.
2. Under Advanced network settings click Change adapter options.
3. Now a network connections window will popup. Right-click the WiFi network adapter and click disable on the context menu.
4. Wait for about 5 seconds, right-click the disabled WiFi network adapter again, and now click Enable.

The network adapter has now been restarted, without rebooting the computer. Check to see if the issue has been resolved.

Reset the computer network

Previously we had discussed restarting the network adapter, but now let us see how we can reset the entire computer network configuration. Resetting refers to reverting all the settings back to their original state, hence any VPN configurations might need to be re-done as they will be deleted after performing this step.

1. Navigate to the following:
   Start Menu -> Settings -> Network & Internet
2. Now scroll to the bottom of the screen and click on Network Reset.
3. On the confirmation screen, click reset now, and the computer will not reboot.

This will first uninstall your network adapters and then reinstall them again, using the same drivers, and revert all settings back to the way they used to be. Check if the WiFi tab is now displaying the available networks or not. If not, continue down this thread to look for alternate fixes.

Also check out: Reset network settings in Windows 10

Run the network troubleshooter

Windows 10 comes with a nifty utility to troubleshoot the different features and components. It can also be used to troubleshoot any problems the users are facing with their networks.

1. To run the troubleshooter, navigate to the following:
   Start Menu -> Settings -> Update & Security -> Troubleshoot -> additional troubleshooters
2. From here, click on the following two troubleshooting options, and then click on Run the troubleshooter:
   • Internet connections
   • Network adapter
3. Go through with the troubleshoot window and perform any necessary suggested actions to fix the problem.

This should fix any known misconfigurations of the adapters which are preventing your computer from discovering new networks.

Enable Network Discovery on Private network profile

Windows 10 now only allows its users to enable Network Discovery on private network profiles. However, there is a workaround to enable it on other profiles as well, which will be discussed later.

Network Discovery allows the computer to be discovered by other devices on the same network, including the router. Hence this could be a problem why WiFi networks won’t display on your computer.

1. Navigate to the following location to enable Network Discovery on Windows 10:
   Start Menu -> Settings -> network & Internet -> Network & Sharing center -> Change advanced sharing settings
2. Expand the Private network profile, under Network Discovery, select Turn on network discovery, and also check the box next to Turn on automatic setup of network connected devices.
   

   Картинка с сайта: www.itechtics.com

3. Click on Save changes.

Now check if the issue has been resolved.

Enable Network Discovery on other network profiles

The Windows 10 settings do not allow its users to enable Network Discovery when they are connected to insecure networks. However, as mentioned before, there is a way to enable Network Discovery on all networks. This can be achieved by creating a rule through a firewall, using the Command Prompt.

1. Open the Command Prompt with Administrative rights by searching for it in the Start Menu, and then launch it by pressing the Ctrl + Shift + Enter shortcut keys. Here is how you can always run Command Prompt in Administrative mode.
2. Now enter the following command:
   netsh advfirewall firewall set rule group="Network Discovery" new enable=Yes

Once the command executes, close the Command Prompt and check if the error has been eliminated. If not, then Network Discovery might not be the problem.

Update network adapter driver

Drivers are what run the hardware through the operating system and let the two communicate with one another. There is a chance that the driver may have been corrupted, or is simply not compatible with the update that you have recently installed on your Windows 10.

First, you need to check what adapter your computer is hosting in order to download the right driver.

1. Open Run and type devmgmt.msc to launch the Device Manager.
2. Now expand Network Adapters and look for the device name.
3. Now navigate to the manufacturer’s website, look for a matching network adapter, and download its latest available driver.
4. Once downloaded, return to the Device Manager and right-click the network adapter, then click update driver from the context menu.
   

   Картинка с сайта: www.itechtics.com

5. In the update driver popup window, click on Browse My Computer for drivers and then navigate to the downloaded driver.
   

   Картинка с сайта: www.itechtics.com

Once the driver is updated, your problem of not being able to view the available networks should go away. If not, proceed to the following steps:

Run dependency services

The visibility of WiFi networks in the vicinity depends upon several services in which the Operating System is running. We must ensure that they are up and running on your device as well.

1. Type in services.msc in Run to view the Services.
2. Now double-click on Network Location Awareness and set the Startup type as automatic from the drop-down menu:
   

   Картинка с сайта: www.itechtics.com

3. Click on Apply and Ok.
4. Now set the Startup type for the following services as mentioned beside them, just as the one above:
   • Network List Service –> Manual
   • Network Event Log –> Automatic
   • Windows Update –> Manual

When done, check to see if the issue is still there.

Remove outdated VPNs

This step is only for those who have any old and outdated VPNs configured on their machines, as it might be a reason why the WiFi won’t display any available networks.

First, you need to check if you have any such VPN configurations.

1. Open Command Prompt by typing in cmd in Run.
2. Enter the following command:
   netcfg -s n
   This command will list all the network adapters, network protocols, and services currently running on your computer.
   

   Картинка с сайта: www.itechtics.com

3. Check to see if the list includes DNI_DNE entry. If it does, it means you have an outdated VPN on your computer which needs to be removed.
4. Now run the following command to remove its existence from the System Registry.
   reg delete HKCR\CLSID{988248f3-a1ad-49bf-9170-676cbbc36ba3} /va /f
   Note that you should create a system restore point before messing around in the registries.
5. Now enter the command:
   netcfg -v -u dni_dne
6. Reboot the computer.

You should now be able to view and connect to any WiFi network in your vicinity.

Install any pending updates

If the issue still remains, you should simply restart the computer to install any pending updates which might be altering the behavior of your Operating System. Simply check for updates by navigating to the Start Menu -> Settings -> Update & Security -> Check for updates. If any are downloaded and installed, restart the computer and you’re done!

Sometimes even the simplest of things can be the reason for a system malfunction. Which one of these fixes worked for you?

Problems with WiFi and the internet connection are probably the most common issues Windows 10 users face. And we’ll agree that there’s nothing more annoying for an average user than Wi-Fi issues while browsing the internet.

There are various Wi-Fi errors that can eventually occur, and in this article, we’ll try to address as many as possible.

There are literally tens if not hundreds of various Wi-Fi issues you can encounter while using Windows 10. Here are some of the most common issues:

• Windows 10 won’t show available networks – This error shows up when a network problem prevents available WiFi networks from showing.
• Windows 10: No connections are available – This error shows up when no connections are available to connect to. It tends to show up, even if you know there are actually some available connections.
• Can’t connect to this network in Windows 10 -This error shows up when you cannot connect to a certain WiFi network. We have an article dedicated to this issue so that you can combine solutions from that article with solutions from this article. Hopefully, you’ll find a proper solution.
• Windows 10: No WiFi icon – This error appears when there’s no WiFi icon in the taskbar at all.
• Windows 10: WiFi quit working – This error appears when your WiFi connection stops working suddenly.
• Windows 10: WiFi won’t turn on – This error means you can turn WiFi on from your taskbar.
• Windows 10: WiFi yellow triangle – This problem tells us there’s something wrong with the connection itself. You can connect to it, but the bandwidth is usually the problem.
• Windows 10: WiFi freeze greyed out – This problem prevents you from doing anything with your WiFi connection. You can’t turn it on, access settings, etc.

I can’t see my wireless network on the list

This is a rather peculiar case, but not impossible to tackle. While for some users, their Windows 10 laptops can’t find WiFi at all, for others, the issue is contained at their home network level.

One user has reported the following: laptop not detecting my WiFi but detecting others. Don’t worry, the solutions below will also work when Windows 10 does not show all WiFi networks available.

So, let’s get to it, shall we?

What can I do if my computer/laptop can’t find the WiFi network?

1. Update network drivers

Another common solution for various network issues is to update your WiFi driver. In case you don’t know how to do that, follow these instructions:

1. Right-click the Start button and open the Device Manager.
2. Locate and expand Network Adapters.
3. Right-click your network adapters and click Update driver software. Make sure to do it with both LAN and WLAN adapters.
   

   Картинка с сайта: windowsreport.com

4. Wait for the process to finish, restart your PC, and try connecting.

If Windows can’t automatically find and download new drivers, read our complete guide on manually doing that.

If the problem is still there, go back to Device Manager > Network Adapters, and do the following:

1. Right-click Network Adapters and open Properties.
2. In the driver tab, click Uninstall.
3. Now, open the Details tab and locate Hardware Ids in the drop-down list.
4. Copy the first line and paste it into the browser.
5. Find proper drivers provided by the official hardware manufacturer.
6. Download and install those drivers for both LAN and WLAN respectively.
7. Restart your PC and check the connection again.

In addition, another helpful way to resolve driver issues is with the help of specialized programs. You can thus update drivers automatically after scanning your PC and see which drivers are out of date and which are not.

In order to do so, you can rely on a third-party solution that will do it for you in minutes. Driver issues are the perfect task for a powerful solution.

Keeping the network drivers up to date can help you prevent other network connectivity issues like no network connectivity in Safe mode with networking.

2. Reset TCP/IP

1. Go to Search, type cmd, right-click it and run the Command Prompt (Admin).
   

   Картинка с сайта: windowsreport.com

2. In the command line, type the following commands and press Enter after each one:
   • netsh int ip reset
   • netsh int tcp set heuristics disabled
   • netsh int tcp set global autotuninglevel=disabled
   • netsh int tcp set global rss=enabled
3. Reboot your PC and try to connect. If the problem is still there, make sure to try out the remaining steps below.

Can’t access TCP/IP on Windows 10? Check out this quick guide to fix the issue.

The first thing we’re going to try is resetting the TCP/IP stack. This is, indeed, one of the most common solutions for network problems in Windows, and can be helpful with other internet issues.

3. Change the wireless SSID and password on your modem

Картинка с сайта: windowsreport.com

Another solution that’s quite common when troubleshooting WiFi and network issues are changing the wireless SSID and password of your modem.

Even though we’re talking about resolving the problem with your wireless network, for this workaround you’ll have to connect your computer to the modem using the Ethernet cable.

Since changing the SSID varies from modem to modem, we can’t tell you what to do precisely. Therefore, we recommend you check your modem’s manual or look online for more info.

4. Check for malware

Contrary to the previous workaround, some malware may corrupt your connection. So, it would be a good idea to run your security scan once again.

If your computer has connection-blocking malware, your antivirus will surely eliminate it.

Choosing a powerful antivirus that can eliminate advanced types of malware is highly recommended. Hence, to secure your system more, you can choose from the best antivirus software available for Windows 10 PC.

5. Reset your modem (and more)

Картинка с сайта: windowsreport.com

Now, let’s switch to more basic solutions, which are probably the first thing you’ll do anyway. Here are some of the actions you need to do to troubleshoot your modem/router:

• Shut down your router or modem. Wait a minute and power it on.
• Disable the modem/router’s built-in firewall temporarily.
• Reset the modem/router to factory settings
• Make sure your router/modem isn’t overheating. Place it far from temperature sources.

Once again, if you’re not sure how to do any of this, check your router/modem manual for more detailed instructions.

You can also try to update your router’s firmware. If you don’t know how to do that, we’ve prepared a nifty guide that will help you.

6. Use the Internet Connection troubleshooter

1. Go to Settings.
2. Open Update & Security.
3. Navigate to Troubleshoot.
4. Click on the Internet Connection Troubleshooter.
   

   Картинка с сайта: windowsreport.com

5. Now, follow further on-screen instructions, and wait for the wizard to finish
6. Restart your computer

If you’re on at least Windows 10 version 1703 (Creators Update), you have a new troubleshooting option on the Settings app. This Troubleshooter can be used for resolving various problems within the system, including the WiFi issue we’re talking about.

If you’re having trouble opening the Setting app, take a look at this article to solve the issue.

7. Make sure DHCP is on

Now, let’s talk about DHCP. In short words, DHCP is a Windows process that assigns the IP address to your computer when you connect to a network.

So, if this process is disabled, your computer won’t be able to obtain the IP address, and therefore, you won’t be able to connect to the internet using your WiFi connection.

So, the first thing we’re going to do is make sure if this process is running. And here’s how to do that:

1. Open Network Connections.
2. Locate your network adapter, right-click it, and choose Diagnose.
   

   Картинка с сайта: windowsreport.com

3. Wait for the process to finish. If the DHCP process was disabled, this will enable it once again.

8. Set your IP address manually

1. Go to Settings and choose Network Connections.
2. Right-click your wireless network and choose Properties from the menu
3. Select Internet Protocol Version 4 (TCP/IPv4) and go to Properties.
4. Now, select the Use the following IP address option and enter the IP address, Subnet mask, and Default gateway.
   • We used settings that work for our configuration, but you might have to enter a different number (see the screenshot).
   • In addition, you’ll have to enter the DNS server manually.
   • In our example, we used Google’s Public DNS, but you can also use 192.168.1.1 as your Preferred DNS server.
     

     Картинка с сайта: windowsreport.com

5. After you’re done, click the OK button.

9. Change the number of DHCP users

And finally, the last solution that involves the DHCP process is changing the number of DHCP users. More precisely, you’ll have to increase the number of DHCP users in your router settings. Usually, the limit is 50 DHCP users, and if you go over, WiFi issues may occur. 

Once again, since the process of changing the number of DHCP users varies from router to router, it’s better to check the manual for detailed instructions.

10. Disable Windows Firewall temporarily

Картинка с сайта: windowsreport.com

Even though Windows Firewall is a useful feature for the overall security of your system, it can cause issues with your network connection. Because of that, we’re going to disable Firewall temporarily and see if there are any changes. Here’s how to do that:

1. Open Control Panel.
2. Go to System and Security.
3. Click on Windows Firewall.
4. Select Turn Windows Firewall on or off from the left side.
5. Turn off Windows Firewall for both Private and Public networks and confirm the selection.
6. Restart your computer.
7. Try connecting.

You can’t open Control Panel on Windows 10? Take a look at this step-by-step guide to find a solution.

11. Disable the Airplane mode

Картинка с сайта: windowsreport.com

As unlikely as it seems, many people have reported that the Airplane mode blocked their WiFi connection. So, make sure the Airplane mode is disabled.

You can find the Airplane mode icon in the Notification panel in the right corner of the taskbar. However, if the icon is missing, there’s an alternative way to disable it:

1. Open Settings.
2. Click the Network & Internet.
3. Click Airplane mode.
4. Toggle Airplane mode off.

12. Use ipconfig /release command

1. Go to Search, type cmd, and open Command Prompt (Administrator)
2. When Command Prompt starts, enter the following lines and after each line press Enter to run it:
   

   Картинка с сайта: windowsreport.com

   • ipconfig /release
   • ipconfig /renew
3. Restart your computer, and try to connect again.

13. Set the channel width to Auto

1. Right-click the Start Menu button and select Network Connections from the menu.
2. When Network Connections window opens, right-click your wireless connection and choose Properties from the menu.
3. Click the Configure button and go to the Advanced tab.
4. Locate 802.11n Channel Width for band 2.4 and set it to Auto.
   

   Картинка с сайта: windowsreport.com

5. Click OK to save changes.

14. Disable IPv6 on your computer and router

1. Open Network and Sharing Center.
2. Go to Connections and click your current connection.
3. The connection status window will open. Click the Properties button.
4. Find Internet Protocol Version 6 (TCP /IPv6) and uncheck it.
   

   Картинка с сайта: windowsreport.com

5. Click OK button to save the changes.
6. Restart your computer in order to apply the changes.

In some cases, enabling the IPv6 protocol solves internet issues, but sometimes this protocol can cause problems.

15. Delete your wireless profile

1. Go to Search, type cmd, right-click it and run the Command Prompt (Admin).
2. When Command Prompt stats enter netsh wlan delete profile name=WirelessProfileName and press Enter.
   • Be sure to replace WirelessProfileName with the actual name of your wireless connection.
     

     Картинка с сайта: windowsreport.com

3. When the process is finished, you need to reconnect and reconfigure your network, in order to establish the connection once again.

If your Wireless Profile got corrupted, the best way to get things back to where they used to be is to simply delete your Wireless Profile, and create it once again.

16. Disable the Family Safety feature

Картинка с сайта: windowsreport.com

1. Navigate to https://account.microsoft.com/family.
2. Sign in with your Microsoft account.
3. Locate the account that you want to remove and click the Remove button. To remove the adult account, be sure to remove all child accounts beforehand.

If there’s a need for the Family Safety feature, we don’t recommend disabling it. However, there’s a chance this very feature blocks your wireless connection. In that case, you have no other choice than to disable it.

17. Disable your antivirus software

You’ve probably heard about this one before. Windows 10 and its components and features don’t get along with third-party antivirus programs.

Because of that interference, various problems may occur. Including our problem with the WiFi network. So, go and temporarily disable your antivirus program and check if the connection is working.

If you’re able to normally connect to your WiFi network with your antivirus program disabled, consider changing your antivirus solution or switching to Windows Defender completely.

If you’re worried about the lack of antivirus, read this article to find out why Windows Defender is the only malware protection you’ll ever need.

18. Change the wireless network mode

1. Open Network and Sharing Center.
   

   Картинка с сайта: windowsreport.com

2. Click Change adapter settings, locate your wireless network adapter, right-click it and choose Properties from the menu.
3. When the Properties window opens, click the Configure button.
4. Go to Advanced tab and from the list select Wireless mode.
   

   Картинка с сайта: windowsreport.com

5. Now change the value of Wireless mode so it matches the value of Wireless mode on your router. In most cases, 802.11b (or 802.11g) should work, but if not, try experimenting with different options.

Your router and wireless adapter need to be on the same network mode to work seamlessly. If that’s not the case, you’ll experience problems with your WiFi connection.

So, you should check the wireless networking mode on your computer in order to make the connection work again.

19. Change Fiddler settings

Картинка с сайта: windowsreport.com

This one, obviously, only applies to Fiddler users. Some users suggest that changing Fiddler settings can also resolve this issue. Here’s how to do that:

1. Click Tools > Fiddler Options.
2. Navigate to the HTTPS tab.
3. Make sure that the text says Certificates generated by CertEnroll engine.
4. Click on Actions > Reset Certificates. Wait for the process to complete.
5. Accept all prompts.

20. Check that all required services for Internet connection sharing are Enabled

Картинка с сайта: windowsreport.com

To do so, go to Search > type services.msc > open Services. And now, just make sure these services are running:

• Plug And Play
• Application Layer Gateway Service
• Remote Procedure Call (RPC)
• Network Connections
• Network Location Awareness (NLA)
• Telephony
• Remote Access Connection Manager
• Remote Access Auto Connection Manager
• Windows Firewall

As mentioned in some previous solutions, the WiFi network requires certain services to work properly. So, you need to make sure each one of these services is running.

Users also reported that the laptop won’t connect to Wi-Fi but other devices will, however, we have a guide that tackles this issue.

That’s about it. We certainly hope at least one of these solutions helped you resolve the problem with your WiFi connection. If you have any additional comments, questions, or suggestions, please let us know in the comments below!