Если подключить Bluetooth-наушники к компьютеру на macOS или ПК, звук из них может быть ужасным как у затычек из перехода за 100 рублей. От проблемы никто не застрахован, но она решается в несколько кликов.
Когда столкнулся сам, пришлось копаться по англоязычным сайтам: на русском нашёл помощь только для macOS.
Вот инструкция, что делать в обоих случаях. Поможет всем, у кого гарнитура с Bluetooth.
Наушники записывают и воспроизводят звук одновременно
В AirPods есть два режима: прослушивания и разговора. Во втором случае качество звука падает, потому что наушники работают на вход и на выход сразу.
Это происходит, когда что-то прямо сейчас пытается записать звук. Например, открытый в фоне Shazam или зафиксированная запись аудиосообщения в мессенджере.
Windows 10 может прикрутить к гарнитуре дополнительный функционал вроде «телефонной связи», как отключить который опишу ниже.
Как улучшить звук AirPods (Pro) на macOS
Сверьте и закройте программы, у которых есть доступ к микрофону:
1. Выберите меню Apple () -> Системные настройки
2. Нажмите Защита и безопасноть -> Конфиденциальность
3. Щелкните в списке слева на пункт Микрофон. Справа будут программы, которые могут записывать звук. Тут ничего не меняйте
4. Выберите меню Apple () -> Завершить принудительно…
5. Закройте все открытые программы, которые есть в списке из пункта 4.
Важно. В окне Завершить пиринудительно… не отображаются все открытые приложения. Если звук всё ещё плохой, закройте программы из пункта 4 в Строке состояния macOS (где часы и заряд).
Переподключите источник вывода аудио, если закрыть программы не помогло:
1. Выберите меню Apple () -> Системные настройки
2. Нажмите Звук -> Выход
3. В списке выберите Встроенные динамики, затем снова свои AirPods.
Меню Вход в этих же настройках включает микрофон выбранного устройства. Поэтому нажатие на этот пункт сразу понижает качество воспроизводимого звука. Убедитесь, что меню закрыто.
Как улучшить звук AirPods (Pro) на Windows 10
Отключите «телефонную связь» устройства:
1. Зайдите в Панель управления. Для этого на рабочем столе нажмите Win + R -> введите «control panel» и нажмите Ок
2. Выберите Оборудование и звук -> Устройства и принтеры
3. Найдите в списке устройств ваши наушники и зайдите в их Свойства через ПКМ
4. Щелкните на Службы
5. Убедитесь, что на Беспроводная телефонная связь галочки нет
Сверьте и закройте программы, которые используют микрофон, если отключить телефонную связь не помогло:
1. Выберите Пуск -> Параметры
2. Нажмите Конфиденциальность -> Микрофон
3. Пролистайте до начала списка приложений с доступом к микрофону. Тут ничего не меняйте
4. Откройте Диспетчер задач сочетанием клавиш Ctrl + Shift + Escape
5. Закройте все открытые программы, которые есть в списке из пункта 4.
По итогу мы просто выключили микрофон
Пока это заметный недостаток технологии Bluetooth: наушники звучат отлично только до тех пор, пока есть правильные условия.
Исходящий звук будет ухудшаться во время записи, потому что меняются режимы передачи данных. Из-за этого для ПК-гарнитуры всё ещё советуют использовать проводные варианты.
После выключения программ, которые используют микрофон, ваши наушники замолчат на несколько секунд, а затем к ним вернётся качественный звук.
Если этого не случилось, не бойтесь обращаться в поддержку. Она помогает.
(59 голосов, общий рейтинг: 4.76 из 5)
iPhones.ru
Ситуация с macOS описана даже у Apple, но проблемы могут быть и на обычном ПК.
Павел
@novrapture
У меня 4 новых года: обычный, свой, WWDC и сентябрьская презентация Apple. Последний — самый ожидаемый, и ни капли за это не стыдно.
Apple users love using AirPods as it provides an amazing audio experience. However, when connected to the PC, the sound quality of these AirPods is compromised making the users wonder what has happened to AirPods. The device working fine with iPhone, Mac, and other Apple devices suddenly started giving issues when connected to the PCs. Worry not. This happens because of certain settings on Windows PCs. In this guide, we will explain how to modify this setting and make other tweaks to fix the “AirPods are not sounding right on the PC.”
Why Does AirPods Sound So Bad On PC
The AirPods have bad sound quality on PC because of the mode the user selects. When an AirPod user connects to the PC, they can choose between two modes: Stereo and Hands-Free.
The Stereo mode delivers high sound quality, generally preferred while listening to music, playing games, or watching a movie. This mode resolves the “AirPod sounds extremely low on PC” issue but does not allow users to use the AirPod’s built-in microphone.
Whereas the Hands-Free mode allows using the microphone and listening to the sound simultaneously. When this mode is used, users face “Bad Airpod sound quality on PC” issues.
Therefore, to use Stereo mode so that the sound quality works fine and the microphone is not affected, users need to tweak certain Windows Audio Settings. Here, we will explain how to do that.
How To Fix AirPods Sounding Bad
There are a few ways to fix the “AirPods sound quality” issue. You can try each step and check the results. If the issue is fixed after executing a troubleshooting method, you can ignore the rest.
Fix 1: Alter AirPod Mode
You can get the best sound quality if you choose the Stereo mode, hence switch the audio mode to Stereo. Here is how to do that:
Step 1: Expand the Playback Device list by clicking the Speaker icon in the taskbar.
Step 2: Choose Stereo from the list.
If you were already in the Stereo mode or want to use the mic along with sound, move to the next fix.
Fix 2: Update The Bluetooth Adapter Driver
Your AirPods connect to your PC using the Bluetooth adapter driver. If the driver is outdated, missing, or corrupted, you will face issues like “AirPod sounds extremely low on PC.” To fix this, we need to update the drivers, and there are three ways of doing this.
Method 1: Download Bluetooth Driver From The Manufacturer’s Website
To update the driver directly from the manufacturer’s website visit the official website and search for the resources available for your PC model. Look for Bluetooth drivers and download/install them. Once the drivers are updated, restart the PC and connect the AirPods. You will no longer find the AirPods sound issues on PC.
Method 2: Download Bluetooth Driver Using The Device Manager
If the above method is too technical, we have a fairly easier way to update Bluetooth drivers. Here are the steps to use the Device Manager to update Bluetooth drivers:
Step 1: Press Win + X and choose Device Manager.
Step 2: Double-click the Bluetooth category to check the list of connected devices.
Step 3: Right-click on the Bluetooth device and choose Update Driver.
Step 4: Select the “Search Automatically For Drivers” option next.
Step 5: If you get the message that “The best drivers for your device are already installed,” move to the next method to update drivers, as this can happen if Windows does not have the latest driver in its database.
Note : If you cannot update drivers via the Device Managers, that implies that the latest drivers have not yet been uploaded to the Microsoft Servers, and you will have to rely on the OEM website or third-party driver updater software.
Method 3: Download Bluetooth Driver Via Advanced Driver Updater
Advanced Driver Updater is a third-party driver updater tool that scans your PC, identifies driver anomalies, and fixes them by updating the drivers to the latest version available on the internet. There are no restrictions in the scope of search for drivers, and it is very easy to use with an intuitive interface that requires a few mouse clicks to do the job. Here are the steps:
Step 1: Download and Install Advanced Driver Updater using the Download link below.
Step 2: Launch the app and click the Start Scan Now button to scan your PC.
Step 3: Locate the Bluetooth driver from the list of driver issues displayed on your screen and click the Update link next to it.
Step 4: The App will find and update your PC’s latest compatible Bluetooth driver.
Step 5: Restart your PC and reconnect your AirPods to check if the sound issue persists.
Fix 3: Turn Off the Hands-Free Telephony Option
According to several forums, the Hands-free Telephony feature causes Bluetooth audio stuttering issues on PCs, including with AirPods. Disabling this feature resolves the problem entirely. To determine if this solution works for you, too, follow these steps:
Step 1: Press Win + I to open the Settings box.
Step 2: Click on the Bluetooth & devices tab in the left pane and the Devices option in the right section of the box.
Step 3: Next, choose the More devices and printer settings option.
Step 4: Locate your AirPods and right-click on it to choose Properties.
Step 5: In the new box, choose Services and remove the check mark next to Hands-free Telephony.
Step 6: Click on Apply, followed by OK.
Fix 4: Use a Separate USB Bluetooth Dongle
Most PCs have a built-in Bluetooth adapter that helps users to connect devices via Bluetooth. However, when this inbuilt adapter has some bugs, you face issues. It is not easy to replace it, and it will constantly trouble you with the “AirPods muffled sound” issue. In this case, as an alternative, we recommend you purchase a USB Bluetooth Dongle and attach it to one of your USB ports. Also, you must disable the default Bluetooth adapter by going to the Device Manager as explained above and choosing Disable instead of Update Drivers.
Fix 5: Use A Different Microphone
If you are not able to fix the AirPods sound issue using the above methods, we suggest you switch the AirPods to Stereo mode and use a different Microphone to communicate. This way, you will not have to face low volume while using AirPods and will be able to talk to others via your PC.
AirPods Quality Is Bad On PCs – Fixed
To summarize, if you are okay with listening only through AirPods, try using the Stereo mode. However, if you wish to use the mic as well, know that the sound quality will be slightly reduced. To fix it, change the settings as explained above and update the drivers. If that doesn’t work, then you will have to invest in a new Bluetooth adapter or a new microphone device.
Hope this helps.
Recommended :
Bluetooth Headphones Keep Cutting Out – How to Stop it from Disconnecting
Airpods Pro — это Bluetooth-наушники, разработанные и произведённые технологическим гигантом Apple. В первую очередь, они предназначены для всех устройств производителя, включая настольные компьютеры / ноутбуки MacOS, iPhone, iPad и т. д. Однако? многие их используют вместе с компьютерами с Windows 10.
Несмотря на то, что гарнитура отлично работает на компьютерах Mac, а также с любой системой, в которой включена функция Bluetooth (Android, Linux и т. п.), многие пользователи жалуются на плохое качество звука на ПК с Windows. Таким образом можно сделать вывод, что проблема заключается именно в конфигурации и совместимости этой системы.
Одна из основных причин, по которой возникают эти несовместимости и аналогичные проблемы с наушниками Bluetooth, связана с тем, как Windows обрабатывает эту технологию. Система настраивает два отдельных устройства — одно для наушников, а другое для гарнитуры. После подключения качество звука устанавливается на 1 канал, 16 бит, 8000 Гц, это является качеством, сравнимым с телефонной связью.
Как исправить плохое качество звука Airpods Pro в Windows
Чтобы исправить плохое качество звука Airpods Pro, необходимо зайти в настройки конфигурации Windows и сделать соответствующие изменения. Также важно отметить, что плохое качество звука может быть связано с другими проблемами на самом ПК, включая несовместимые или повреждённые звуковые драйверы, нарушенные системные файлы и другие проблемы.
Прежде чем начинать вносить правки в систему, рекомендуется выполнить диагностику специализированными программами, чтобы выявить возможные проблемы с ОС и автоматически исправить их всего за несколько минут. Ну, а далее можно приступать к ручным методам.
Способ 1. Обновите драйверы
Качество звука может сильно пострадать, если на устройстве установлены устаревшие драйверы. Поэтому сначала следует попробовать обновить звуковые и аудиодрайверы:
- Щелкните ПКМ по значку Пуск и выберите «Диспетчер устройств».
- В новом окне разверните раздел «Аудиовходы и аудиовыходы».
- Нажмите правой кнопкой по доступной гарнитуре и выберите «Обновить драйвер».
- Далее нажмите на пункт «Автоматический поиск драйверов» и обновите их.
- После этого разверните раздел «Звуковые, игровые и видеоустройства» и обновите драйверы тем же способом.
- Дождитесь загрузки и установки драйверов, а затем перезагрузите компьютер.
Способ 2. Используйте двухдиапазонный адаптер
Одна из основных причин плохого качества звука Airpods Pro в Windows заключается в том, как работает технология Bluetooth — она просто не обеспечивает достаточной пропускной способности для эффективной работы наушников. В этом случае может помочь двухдиапазонный адаптер — он хорошо работает с диапазонами 2,4 и 5 ГГц, обеспечивая гораздо лучшее качество передачи для вашей гарнитуры.
Проблема в том, что адаптер — это дополнительное оборудование, которое придётся покупать отдельно. Однако те, кто готов потратить немного лишних денег на удобство, будут довольны лучшим качеством звука.
Способ 3. Установите Airpods Pro в режим наушников
Этот метод самый эффективный, хотя он не позволит вам использовать микрофон. Однако, если это не требуется, то проблема решается всего в несколько кликов. На панели задач, внизу экрана, рядом со временем и датой есть значок динамика. Щёлкнув по нему при подключённых Airpods отобразится список устройств воспроизведения:
- Гарнитура (Airpods Pro Hands-Free AG Audio)
- Наушники (AirPods Pro Stereo)
Всё, что нужно сделать, это выбрать наушники (AirPods Pro Stereo), нажав на них один раз. На случай, если понадобится микрофон, придётся подключать отдельное устройство. Также на ноутбуках есть встроенный микрофон.
Apple Footer
-
This site contains user submitted content, comments and opinions and is for informational purposes
only. Apple may provide or recommend responses as a possible solution based on the information
provided; every potential issue may involve several factors not detailed in the conversations
captured in an electronic forum and Apple can therefore provide no guarantee as to the efficacy of
any proposed solutions on the community forums. Apple disclaims any and all liability for the acts,
omissions and conduct of any third parties in connection with or related to your use of the site.
All postings and use of the content on this site are subject to the
Apple Support Community Terms of Use.
See how your data is managed…
Copyright ©
Apple Inc. All rights reserved.
Are you experiencing choppy audio when using your AirPods Pro with Windows 10? If so, you’re not alone. Many users have reported that ther AirPods Pro sound great when connected to their iPhone, iPad, and Android devices but not when they connect them to a Windows 10 computer. The good news is there are some steps you can take to fix this issue and get your AirPods Pro working properly with Windows 10.
The first step is to make sure your audio driver is up to date. To do this, open the Device Manager on your PC and look for the “Sound, video and game controllers” category. Right click on the audio driver and select “Update Driver”. This will search for any available updates, if any are found it will install them automatically.
Another potential caue of AirPods Pro choppiness on Windows 10 could be due to too many applications running in the background which can slow down performance or interfere with the Bluetooth connection that your AirPods need. To check for this, open the Task Manager (Ctrl + Alt + Del) and look at the list of running applications. If there are too many applications running at once it might be worth closing some of them down so that more resources are available for your AirPods Pro connection.
Audio enhancements can also cause problems with AirPods Pro connections on Windows 10 machines which can lead to choppy audio. To check for this, open up Control Panel > Sound > Enhancements tab and make sure none of these options are enabled; they can interfere with Bluetooth connections over long distances or if they’re turned on while uing other wireless devices like keyboards or mice.
Finally, it’s worth checking that all necessary drivers are up-to-date as older versions may not always work smoothly with current versions of Windows 10 which could lead to audio issues such as stuttering or dropouts while using your AirPods Pro. To update drivers manually visit each device manufacturer’s website and download any available updates then install them as required. Alternatively thre are software programs such as Driver Booster which can do all this for you automatically by searching for new updates online and installing them in one go – just be sure to back up any important data before undertaking any major driver update tasks like this one!
We hope these tips have helped you troubleshoot any issues you may have been having with your AirPods Pro on Windows 10! If none of these steps work then it might be worth trying a different pair of headphones or reaching out directly to Apple support for further assistance in resolving the issue as there may be more complicated underlying causes at play here than just outdated drivers or application interference!
Troubleshooting AirPods Stuttering in Windows 10
AirPods stuttering in Windows 10 can occur due to a variety of reasons, including outdated audio drivers, Bluetooth interference, incompatible hardware settings and software conflicts. To troubleshoot the issue, you should start by updating your audio driver and checking the Bluetooth settings of your device. You can also check for any software conflicts or incompatible hardware settings that could be causing the issue. If all else fails, you may need to reset your AirPods or reset your entire system.
Troubleshooting Choppy Sound on AirPods
There are a few possible reasons why your AirPods may sound choppy. One possibility is that the audio source (e.g. laptop, phone, etc.) has too many apps running which can slow down its performance and interfere with the Bluetooth connection the AirPods require. Another possibility is that the necessary drivers on the audio source may be out-of-date and need an update. Finally, some audio enhancements in the audio source can cause audio cut outs. If none of these solutions work, try resetting your AirPods or replacing them if they are no longer under warranty.
Troubleshooting AirPods Audio Glitching on PC
The most common cause of audio glitching with AirPods on PC is a lack of sufficient bandwidth. This can happen when the device is too far from the Bluetooth receiver, or when there are too many oher Bluetooth devices connected at once. Additionally, if your computer’s Bluetooth chipset is not up to date, this could also be causing the issue. To resolve this problem, try reducing the distance between your AirPods and your computer, or disconnecting other Bluetooth devices that are connected. Additionally, make sure to check for any available updates for your computer’s Bluetooth chipset and install them if necessary.
The Causes of Choppy Bluetooth Connections
Bluetooth can become choppy if the signal is weak, or if it is being interrupted by other frequencies in the environment. You may also experience choppiness if too many applications are running at the same time on the connected device, or if the music being played has a high bit rate. To reduce choppiness, try to move closer to the Bluetooth device, close applications you’re not using, and switch to music with a lower bit rate.
Fixing Choppy Airpod Audio
If your AirPods are experiencing choppy audio, there are a few steps you can take to try and fix the issue. First, try cleaning the mesh on each earbud with a soft-bristled brush and some rubbing alcohol. This will help remove any debris that may be blocking the sound. You should also check that your AirPods are paired correctly with your device by going into Bluetooth settings and ensuring they’re connected. If they aren’t, try resetting them by putting both earbuds back in the charging case and pressing and holding the button on the charging case for 15 seconds. Lastly, try disabling any active noise cancellation or audio equalization settings on your device as this can cause choppy audio. If none of these steps resolve the issue, then it’s lkely a hardware problem and you should contact Apple for assistance.
Compatibility of AirPods with Windows 10
Yes, AirPods work well with Windows 10. They connect to your device wirelessly using Bluetooth, so you can easily pair them to any Windows computer or laptop. To do this, make sure your AirPods are powered on and wthin range of the Windows 10 device. Then enable Bluetooth on the device and select ‘AirPods’ from the list of available Bluetooth devices. Once connected, you can enjoy listening to music, making phone calls and more with your AirPods.
Conclusion
In conclusion, Bluetooth audio stuttering on Windows 10 can be caused by outdated audio drivers, too many apps running simultaneously, out of date drivers, or audio enhancements. Although Windows 10 does not provie enough bandwidth for both Airpods and Bluetooth to work effectively, updating the audio driver and disabling audio enhancements can help to reduce or eliminate the issue. Additionally, closing unnecessary apps will help to improve the performance of the audio source.