Многие люди довольны тем, что Microsoft предложила бесплатный переход на Виндовс 10, при условии, если у них уже есть действующая лицензия. При выпуске в 2015 году, многие пользователи воспользовались этой возможностью и приняли предложение. Здесь используется цифровая лицензия из предыдущей версии операционной системы — она применяется автоматически, и пользователям не нужно ничего делать.
К сожалению, это создает некоторые проблемы, и код ошибки активации 0xC004F213 является одной из них. Пользователи утверждали, что они получили уведомление внезапно, хотя в большинстве случаев это результат аппаратного изменения последнего обновления Windows. 0xC004F012 — очень похожая ошибка, с которой пользователи могут столкнуться при аналогичных обстоятельствах.
В других случаях некоторые заявили, что столкнулись с ключом ошибки 0xC004F213 во время процесса обновления Windows. Независимо от обстоятельств, ошибка также может возникнуть у тех, кто использовал не цифровую лицензию, а ключ продукта для Windows 10 или Windows 11. Проблема универсальна, однако, в обоих случаях пользователи получают уведомление, которое гласит:
Windows сообщила, что на вашем устройстве не был найден ключ продукта.
Код ошибки: 0xC004F213
Важно отметить, цифровая лицензия описывает систему активации, хотя сама по себе она не является лицензией — она не может полностью заменить ключ продукта. Следовательно, чтобы устранить код ошибки 0xC004F213, пользователям необходимо применить ключ, который использовался для активации вашей исходной копии ОС Windows. Так же вы можете купить новый оригинальный ключ активации Windows 10 или Windows 11 в нашем магазине по удивительно низкой стоимости.
Некоторые пользователи сообщали, что они также видят дополнительные ошибки при использовании Windows, к примеру сбои Blue Screen of Death. Если это так, возможно, системные файлы Windows повреждены, поэтому система не способна правильно идентифицировать вашу лицензию. Давайте рассмотрим варианты исправления ошибки.
Исправление 1. Установите все доступные обновления Виндовс 10 или Виндовс 11, смотря какая ОС у вас установлена.
Проверьте: установлены ли все обновления для вашей операционной системы:
1. Кликните правой кнопкой мыши по пункту «Пуск» в нижней левой части экрана, выберите «Настройки» либо «Параметры».
2. Переместитесь в раздел «Обновление и безопасность»
3. Здесь нажимаем: «Проверить наличие обновлений» и ждём. Если обновления будут найдены, появится кнопка «Загрузить и установить», а также «Просмотреть все необязательне обновления». Выберите установку всего доступного, включая накопительные обновления, обновления безопасности и дополнительные обновления, путем нажатия на кнопку «Просмотреть все необязательне обновления». Затем жмем «Загрузить и установить».
4. После этого перезагрузите вашу систему.
Исправление 2. Запустите средство устранения неполадок активации.
Встроенные средства устранения неполадок могут решить многие проблемы, в том числе связанные с процессом лицензирования.
1. Откройте «Настройки» либо «Параметры» > «Обновление и безопасность», как описано выше, в первом пункте.
2. В левом меню выберите «Активация».
3. Под сообщением об ошибке вы должны увидеть несколько ссылок, по которым можно щелкнуть — выберите «Устранение неполадок».
4. Следуйте инструкциям на экране и примените предложенные исправления.
Исправление 3. Используйте встроенную команду в командной строке, чтобы проверить свой ключ.
Вы можете использовать следующие команды, чтобы проверить, какой у вас ключ активации (инструкции для цифровой лицензии).
1. Нажимаем левой клавишей мыши на «Пуск» внизу слева вашего экрана. Начинаем просто набирать на клавиатуре «cmd» без кавычек, либо «Командная строка«, также без кавычек. Как только увидите отобразившуюся утилиту, кликните правой клавишей мыши на нее, нажмите: «Запуск от имени администратора».
2. Если появится Контроль учетных записей пользователей, нажмите «Да».
3. Когда откроется командная строка, скопируйте и вставьте следующую команду:
slmgr / xpr
И далее «Enter».
4. Используйте командную строку для валидации.
Для тех у кого есть действующий код продукта, воспользуйтесь следующими инструкциями:
1. Кликните правой клавишей мыши «Пуск» и далее «Windows PowerShell» (Admin). Выбирать необходимо именно тот пункт, где указано «(Администратор)».
2. Когда появится новое окно синего цвета, скопируйте и вставьте следующую команду:
wmic path softwarelicensingservice get OA3xOriginalProductKey
Нажмите «Enter».
3. В случае, если система отобразила вам доступный OEM ключ, следуйте по пути: правой кнопкой мыши на «Пуск», затем «Настройки» или «Параметры» , «Обновления и безопасность», «Активация», «Изменить ключ продукта» и введите его там.
Исправление 4.
Зачастую серверы Windows бывают очень загружены. И при обновлении операционной системы сразу же появился код ошибки виндовс 0xC004F213, вам следует подождать несколько дней, если серверы не работают или заняты. Если это не сработает, попробуйте применить другие предложения, перечисленные здесь.
Исправление 5. Активируйте Windows по телефону.
Если по какой-либо причине вы не можете активировать Windows, но у вас есть рабочий ключ продукта, вы можете провести оффлайн активацию.
1. Подготовьте ключ продукта Windows
2. Посмотрите выше пункт с названием «Исправление 3«. Воспроизводим оттуда пункты 1 и 2.
3. После открытия командной строки копируем текст строкой ниже и вставляем его
slmgr -ipk XXXXX-XXXXX-XXXXX-XXXXX-XXXXX (где «Х» — это ваш ключ)
Жмем «Enter», далее нажимаем «ОК»
4. Затем вводим следующую команду:
slui 4
и нажимаем «Enter».
5. В открывшемся окне выберите свою страну и нажмите «Далее». Вам будет предоставлен бесплатный телефонный номер — наберите его.
Если вы из России, и указанный системой, номер, недоступен, попробуйте набрать этот номер: +7 (495) 916-70-41
6. Следуйте дальнейшим инструкциям автоответчика.
Надеемся, мы помогли решить вашу проблему. А если вы не имеете действующего ключа продукта, вы можете приобрести его в нашем магазине с огромной скидкой. Выбирайте вашу версию Windows в верхнем меню и активируйте операционную систему буквально за 2 минуты без каких либо проблем.
Для решения проблемы с активацией, можно получить предустановленный ключ продукта через PowerShell и повторно активировать систему. Можно запустить средство устранения неполадок или войти в свою официальную учетную запись.
Что такое ошибка 0xC004F213
Данная ошибка возникает после замены материнской платы или при обновлении системы до Windows 10 Pro.
Определяем лицензию предустановленного продукта Виндовс для решения проблемы с 0xC004F213
- Жмем сочетание клавиш «Wind + R». Водим «powershell» и жмем «Ctrl + Shift + Enter», чтобы открыть команду Powershell (администратор).
- В ответ на запрос UAC (Контроль учетных записей пользователей) выбираем «Да». Диалог запуска: «powershell», затем «Ctrl + Shift + Enter»
- Вводим команду «wmic path softwarelicensingservice get OA3xOriginalProductKey» и жмем
- После открытия предустановленного ключа продукта запишите его или скопируйте в буфер обмена.
- Закрываем окно «PowerShell».
- Давим сочетание клавиш «Wind + R» Вводим «ms-settings: activate» в текстовое поле и жмем Enter.
- На вкладке «Активация» выбираем «Изменить ключ продукта», затем вводим номер, который ранее нашли.
Запускаем средство устранения неполадок активации Виндовс для устранения 0xc004f213
- Нажимаем сочетание клавиш «Win + R». Затем вводим «ms-settings: activate» и нажмите
- На вкладке «Активация», переходим на правую панель, затем прокручиваем вниз до меню «Активировать Windows» и выбираем «Устранение неполадок».
- Ждем завершения сканирования.
- Если утилите удается найти проблему, которую она может исправить автоматически, выбираем «Применить это исправление», а затем следуем инструкциям на экране, чтобы применить рекомендуемое исправление.
- После завершения процесса перезагрузите компьютер и посмотрите, будет ли проблема устранена при следующем запуске компьютера.
Обращение к агенту Microsoft для решения проблемы 0xc004f213
Что бы связаться с Microsoft Live Agent, нужно открыть страницу контактов, нажать «Получить помощь» и дождаться, когда в чат приедет агент и поможет вам.
Как приобрести новую лицензию Виндовс и убрать ошибку 0xC004F213?
Что бы купить новую лицензию делаем следующее:
- Переходим в«Настройки» → «Обновление и безопасность» → «Активация».
- Выбираем «Перейти в магазин».
Получаем новый код и вводим его на компьютере.
Загрузка…
Статья подготовлена при участии
-
Home
-
News
- Windows 11/10 Can’t Activate with Error Code 0xC004F213? 5+ Fixes!
Windows 11/10 Can’t Activate with Error Code 0xC004F213? 5+ Fixes!
By Vera | Follow |
Last Updated
There is nothing more frustrating than activating Windows 11/10 with error code 0xC004F213. No worries. This comprehensive tutorial from MiniTool will walk you through how to fix the activation error with several useful solutions.
On a PC, activating the system helps verify if your copy of Windows is genuine and that it hasn’t been used on more devices which violate the Microsoft Software License Terms. However, you may always have trouble activating Windows 11/10 such as error code 0xC004F213.
On the computer screen, a message says “Windows reported that no product key was found on your device. Error code: 0xC004F213”. Even though you use an authentic product key, you also suffer from such an issue.
When does 0xC004F213 occur? This is primarily because a Windows license is in connection with the device hardware. Once you make big hardware changes like replacing a motherboard, the system fails to find a matching license, resulting in 0xC004F213 activation error the next time you start the device.
1. Enter Your Product Key
According to Microsoft, a new license is required if Windows 11/10 was pre-installed and you have replaced the motherboard. To do this thing, go to Start > Settings, click System > Activation (Win11) or Update & Security > Activation (Win10). Then, choose Go to Microsoft Store.
But if you use a Windows product key before the motherboard change, hit the Change or Change product key button in the Activation window. Enter the product key and hit Next to continue. And then complete the activation process.
2. Use a Digital License
If you ever used a digital license to activate Windows 10/11, it is possible to log in using the Microsoft account that you used to purchase it. After finishing the login, Windows will be activated automatically as the digital license is automatically connected to your hardware and Microsoft account. Just hit Add an account from the Add a Microsoft account section to sign in.
To check if your Windows is activated, run Command Prompt as an administrator, type slmgr /xpr into the window, and press Enter.
3. Use a Preinstalled Key
When purchasing a PC, Windows may come on the device with a product key and the system may forget it, leading to error code 0xC004F213. So go to find the product key and activate Windows 11/10.
Usually, the key is located on the back of the computer, usually on a sticker. Or you can check the physical package and find it. Also, run PowerShell to get the product key by taking these steps.
Step 1: Type powershell and hit Run as administrator.
Step 2: Execute the command – wmic path softwarelicensingservice get OA3xOriginalProductKey.
Step 3: Copy the key and then go to Activation in Settings, activate the system without any error code.
4. Run Windows Activation Troubleshooter
When Windows activation error 0xC004F213 happens on Windows 11/10, you have another option to fix this issue – using the activation troubleshooter.
Step 1: Press Win + R, type ms-settings:activation and hit OK. This will take you to the Activation interface.
Step 2: The error code 0xC004F213 will show here, followed by a link/button named Troubleshoot. Just click on it to run the troubleshooter.
Step 3: Proceed with on-screen instructions to finish the troubleshooting process.
5. Update Windows
Make sure your Windows has installed the latest updates, which can sometimes resolve error 0xC004F213.
Tips:
Before proceeding, remember to back up your PC as a prevention tip since some potential issues could result in system breakdown or data loss. For PC backup, run MiniTool ShadowMaker.
MiniTool ShadowMaker TrialClick to Download100%Clean & Safe
Step 1: Move to Settings > Windows Update (Win11) or Update & Security > Windows Update (Win10).
Step 2: Check for updates and install any available updates.
Step 3: Activate Windows and see if you still see 0xC004F213.
Other Tips to Fix Error Code 0xC004F213
In case the above ways cannot fix Windows activation error 0xC004F213, take these additional steps:
- Make sure the Windows Edition you have installed matches your product key.
- Ensure your Internet connection is stable since the activation process requires connecting to Microsoft’s servers.
- You use a genuine copy of Windows rather than a cracked one.
- Clean install Windows 11/10. Also, back up your important data before proceeding using MiniTool ShadowMaker as this operation could erase files/folders. Then, download ISO, burn it to USB, boot Windows from USB, and install Windows from scratch. During the installation, enter your product key if prompted.
MiniTool ShadowMaker TrialClick to Download100%Clean & Safe
Final Words
How to fix error code 0xC004F213 in Windows 11/10 activation? Multiple workarounds have been introduced here and try them one by one. If all of them cannot work, go to contact Microsoft Support for help. Then, you can enjoy the system.
About The Author
Position: Columnist
Vera is an editor of the MiniTool Team since 2016 who has more than 7 years’ writing experiences in the field of technical articles. Her articles mainly focus on disk & partition management, PC data recovery, video conversion, as well as PC backup & restore, helping users to solve some errors and issues when using their computers. In her spare times, she likes shopping, playing games and reading some articles.
Did you recently get activation error 0xC004F213 suggesting that Windows 10 could not find any matching license? In this guide, we’ll explain why this error code occurs and how you can fix it.
What Is Windows 10 Activation Error 0xC004F213?
Error code 0xc004f213 indicates that no product key was found on your computer. As Microsoft explains, error 0xc004f213 usually occurs if you recently replaced your motherboard.
When you install Windows 10 on your device, the license key is automatically associated with your motherboard. If you replace the motherboard, you need to activate the license once again.
Error 0xc004f213 sometimes appears when you upgrade to Windows 10 Pro. And there’s a specific fix for this problem. We’ll list it below.
Contents
- 1 Solutions to Fix Windows 10 Error 0xC004F213
- 1.1 Enter Your Product Key Again
- 1.2 Run the Activation Troubleshooter
- 1.3 Use a Generic Key
- 1.4 Buy a New Windows License
Solutions to Fix Windows 10 Error 0xC004F213
Enter Your Product Key Again
Entering your Windows key again may refresh your license information and fix the problem.
- Navigate to Settings.
- Then select Update & Security.
- Click on Activation.
- Select Change product key.
- Enter the key you used before and check if re-validating it fixes the issue.
Discover how you can find your Windows 10 product key.
If You Have a Digital License
A digital license is an activation method that does not replace the Windows 10 product key. In other words, if Windows 10 was preinstalled on your machine, you still need to enter the key for activation.
To check if your computer key is activated:
- Launch Command Prompt as administrator.
- Then enter the slmgr /xpr command and hit Enter.
- If the key is not activated, and the machine is not permanently activated, go to the next step.
To view your Windows 10 preinstalled key:
- Launch PowerShell (administrator).
- Enter the following command: wmic path softwarelicensingservice get OA3xOriginalProductKey
- Copy the key.
- Then, go to Settings → Update & Security → Activation → Change product key.
- Enter your key for activation.
Run the Activation Troubleshooter
Additionally, the Activation Troubleshooter may help you to fix error 0xc004f213 in just a few minutes.
- Go to Settings
- Then select Update & Security
- Click on Activation
- Select the Troubleshooter and run it to detect and repair any activation issues.
Note: If you already activated your Windows key, the Troubleshooter is not visible.
Use a Generic Key
Error 0xc004f213 may occur after upgrading to Windows 10 Pro, and your computer installed Windows 10 Enterprise instead of the Pro edition. This is a known bug.
- Disconnect your computer from the Internet.
- Then go to Settings.
- Navigate to Update and Security.
- Next, select Activation.
- Click on the Change Product key option.
- Enter this key: VK7JG-NPHTM-C97JM-9MPGT-3V66T (this is a generic product key that will downgrade your computer from the Enterprise version to Windows 10 Pro).
- Click on the Activate Product button.
- Restart your computer. Your own license should activate automatically after this step.
- Repeat the process if the first attempt did not work.
Buy a New Windows License
If nothing worked, try purchasing a new Windows license. To do this:
- Go to Settings → Update & Security → Activation.
- Select Go to the Store.
- Get a new key and enter it on your computer.
There you go; we hope the annoying Windows activation error 0xc004f213 is gone now.
This activation error occurs when Windows is unable to find a product key associated with your hardware. This could happen after replacing hardware such as a motherboard. A product key is assigned to the motherboard firmware, so it cannot be used on multiple devices simultaneously.
To fix this error, you need either a product key or a digital license to reactivate your Windows install. If your computer or laptop comes with Windows preinstalled, then you can reactivate your Windows using a preinstalled product key.
Reactivating Windows will resolve this issue, especially if you recently changed your motherboard. However, if you don’t remember your product key, you may need to purchase one. Alternatively, you could also use the old motherboard to copy the product key if you want to save money.
The other main reason is Windows might forget the product key that comes in the preinstalled Windows with a new laptop or computer. If this situation is applicable to you, then you can activate your Windows with an old product key.
1. Activate Windows using a product key
The first method to fix this error is to activate Windows with a product key. This method requires the product key that you used to activate your Windows originally. If you don’t have it, you might need to buy it from the Microsoft store again. However, if you have a digital license, you can follow the other method.
- To activate Windows using a product key, right-click the Start Menu and select Settings from the listed options.
Opening Windows Settings - Once the Setting is opened, go to Activation. If you have Windows 10, go to Update and security, then go to Activation from the left pane.
Navigating to Activation Settings - Click Change next to the Change product key. For Windows 10. Just click the Change product key.
Proceeding to change a product key - Enter your product key and click Next.
Entering a product key - Then, click Activate.
- You will receive a message that your Windows is activated.
2. Activate Windows using a digital license
If you activated your Windows install with a digital license, then you just need to log in with the Microsoft account that you used to purchase it. Digital licenses are automatically associated with your hardware and your Microsoft account. So once you log in with your Microsoft account, your Windows will automatically be activated.
If this does not happen, make sure that you are logged in with the correct Microsoft account. If you are sure, then follow the next method.
To check if your Windows is activated or not, follow the steps:
- Once you have signed in, you need to check whether your system is activated or not. To do so, press the Windows + R keys together to launch the Run Window.
- Enter cmd in the input box and click OK.
Opening Command Prompt using Run Program - Once you open the command prompt, then enter the following command.
slmgr /xpr
Checking Windows activation status - If you did not receive the message saying “The machine is permanently activated.” then you have to follow the next method.
3. Run Windows Activation Troubleshooter
If you didn’t link your Microsoft account to the digital license before you upgraded the hardware, skip this method. However, if you did, then running the activation troubleshooter will activate your Windows. To do so, follow these steps:
- Press the Windows key and type Settings.
Opening Windows Settings from Start Menu - Open Settings and go to Activation. If you have Windows 10, navigate to Update & Security and select Activation.
Heading towards the Activation Settings - You will see the Troubleshoot option if you get any activation errors.
- Click on it to run the troubleshooter. You might see Windows can’t be activated on your device message.
- Select I changed hardware on this device recently, then click Next.
- Enter your Microsoft sign-in information and click Sign-in.
- After that, select This is the device I’m using right now and click Activate.
4. Use preinstalled product key
If you bought a new system and Windows comes preinstalled on it with the product key, Windows might forget it, causing this error. To fix this error, you will have to re-enter the product key. You will need to reveal and copy the product key first with the help of commands. To do so, follow these steps.
- Press the Windows key and type Windows PowerShell.
- Right-click on PowerShell and select Run as administrator
Launching Windows PowerShell - Once the PowerShell is launched, enter the following command.
wmic path softwarelicensingservice get OA3xOriginalProductKey
- Hit Enter to reveal the product key.
- Highlight the product key and press Ctrl + C to copy it to the clipboard.
- Now close the PowerShell. Press Windows + R keys together to open Run Window.
- Enter the following command to navigate into activation settings.
ms-settings:activation
Opening Activation settings - Click Change next to the Change product key option. If you have Windows 10, click on the Change product key.
- Paste the product key and click Next, then click Activate.
Activating Windows with a preinstalled product key - You will receive a Windows is activated message if your product key is valid.
5. Contact Microsoft support
If the problem persists, then the last solution is to contact a Microsoft support agent. To do that, follow the steps:
- Just visit the Microsoft contact page and type your issue in the search box, and press Enter.
- You will see some methods according to your issue. Skip them, as we have already listed all the possible scenarios in this article.
- Click Contact Support.
Contacting Microsoft Support - Choose Windows from the products and click Confirm.
Selecting Windows from the products list - Click Provide your phone number, and a support agent will call you.
- Enter your phone number and click Confirm.
Giving phone number to Microsoft support - Additionally, we recommend you give a screenshot of your issue by clicking the Add a file option.
6. Purchase a new product key
If all methods fail, ensure the product key you have been trying is not being used on other devices because this is against Microsoft policy. However, if that’s not the case, and you have tried all the methods listed in this article, you might need to purchase a new product key.
- To purchase a Windows 11 product key, you can use third-party websites to buy a product key at low prices, such as G2A. Once you have bought a product key, press the Windows + R keys together to launch the Run Window.
- Enter ms-settings:activation and click OK.
Opening Activation Settings using a Run Program - Click the Change button on the right side of the Change product key option. For Windows 10 users, click the Change product key.
Changing a product key - After that, paste the copied product key here, then click Next.
Pasting a copied product key - Click Activate. Once done, you will get a confirmation message Windows is activated.
Hamza Mohammad Anwar
Hamza Mohammad Anwar is an intermediate JavaScript web developer with a focus on developing high-performance applications using MERN technologies. His skill set includes expertise in ReactJS, MongoDB, Express NodeJS, and other related technologies. Hamza is also a Google IT Certified professional, which highlights his competence in IT support. As an avid problem-solver, he recreates errors on his computer to troubleshoot and find solutions to various technical issues.