Download Windows Speedup Tool to fix errors and make PC run faster
If you see the error message No physical memory is available at the location required for the Windows Boot Manager, The system cannot continue when you try to start your computer, then this post will help you. This issue mainly occurs if the motherboard’s BIOS gets corrupted. However, there are other reasons too that may cause this error.
If the System can not continue error keeps troubling you, follow these steps to fix it:
- Repair the Boot Manager
- Run Startup Repair Tool
- Troubleshoot using Safe Boot
- Roll Back Windows Update/Upgrade
- Update BIOS
Now, since you cannot boot Windows normally, you may have to try and boot in Safe Mode or into Advanced Startup options screen to be able to carry out the fixes. You will need to make use of the Command Prompt. For some strange reason if you can boot in Safe Mode but cannot access the Advanced Startup Options screen, when in Safe Mode, you may use the Command Prompt to boot Windows directly to Advanced Startup Settings screen.
1] Repair the Boot Manager
A damaged or corrupted Boot Manager is one of the main reasons why this error message may occur. Follow these steps to repair your Boot Manager.
Since you cannot boot Windows normally, you will need to press F8 while booting the system to the Windows Recovery Menu, then click on Troubleshoot > Advanced options to get into the Automatic Repair menu.
Click on the command prompt and type in the following commands, one after the other:
bootrec/fixmbr bootrec/fixboot bootrec/rebuildbcd
Exit and now go ahead and reboot your system. In some cases, you may need to run some additional commands:
bootsect /nt60 SYS or bootsect /nt60 ALL
2] Run Startup Repair tool
The Startup Repair Tool automatically diagnoses and repairs complex startup problems. These diagnostics include analyzing startup log files to determine the cause of the problem. Follow the steps mentioned above to reach the Advanced options screen and then click on Startup Repair.
Once done restart your PC and check if the issue is fixed.
3] Troubleshoot using Safe Boot
Performing a Safe Boot ensures the operating system loads with minimal system files and device drivers. No programs or add-ons run in Safe Boot mode. Here’s how you can perform a safe boot:
- Press the Windows key + R to open the Run dialog box.
- Type msconfig and hit Enter.
- Navigate to the Boot tab and check the Safe Boot option.
- Under Safe Boot, check the Network option as you’ll need internet to run Virtual Machine.
- Click on Apply and then Ok to save the changes.
- Restart your computer; once done, it will now boot into the Safe Boot mode.
- Now open Task Manager and check which services and startup programs are loading.
4] Roll back Windows Update/Upgrade
If the issue occurred after Windows Updates, you might consider uninstalling the Update. To uninstall an update, follow these steps:
- Press the Windows key + R to open the Run dialog box.
- Type appwiz.cpl and hit Enter.
- In the Uninstall or view a program page click on View Installed Updates.
- Right-click on the recently installed update and select Uninstall.
5] Update BIOS
If none of the above steps were able to help you, update the Motherboard’s BIOS. It’s possible an outdated or corrupted BIOS is the real culprit. On updating the BIOS, your PC should start functioning normally.
Fix: Error 0x80370102 The Virtual machine could not be started because a required feature is not installed
How do you fix not enough physical memory is available to power on this virtual machine with its configured settings?
To fix this, you need to shut down unnecessary applications and services. Doing so will free up enough memory to launch Virtual Machine. But if you could switch on the virtual machine in the past, try rebooting the host computer. Rebooting the host device can allow you to use more memory than specified.
Read: The Virtual Machine Management service encountered an error while configuring the hard disk.
How do I fix insufficient physical memory?
As we know, insufficient physical memory can lead to slow performance on VMWare Virtual Machine. These are usually caused by memory shortages, updated configuration, and system glitches. You can fix these by running VMware as an administrator and update it to the latest version.
Shubham is a graduate in Information Technology who likes to write about Windows Troubleshooting as well as Gaming Tips. He’s always engaged with new tech and gadgets. When not writing, he enjoys reading books, watching movies, and exploring new technologies.
-
Home
-
Partition Magic
- Fixed: No Physical Memory Is Available at the Location Required
By Yamila | Follow |
Last Updated
What if no physical memory is available at the location required for the Windows Boot Manager? If you wonder about that, you are in the right place. In this post, MiniTool Partition Wizard introduces how to solve this issue in detail. Just have a look.
When you are trying to boot your Windows, you may fail and receive an error message that says: no physical memory is available at the location required for the Windows Boot Manager. This error can be caused by various reasons, such as the wrong boot order, damaged CMOS battery, improper BIOS settings, and so on.
If you encounter the “no physical memory is available at the location required” issue like others, you can follow the solutions in this post to work your problem out.
Solution 1: Modify the Boot Sequence
If the boot order is set wrongly, you may run into the “no physical memory is available at the location required” issue as well. To fix it, you should enter BIOS and make sure the hard drive you use to boot the system is the primary boot device. Here’s a guide on how to change the boot order: How To Change Boot Order Safely On Windows Device.
Solution 2: Change the CMOS Battery
The “no physical memory is available at the location required” issue may happen due to the corrupted CMOS battery. If it’s the reason, you should replace the CMOS battery with a new one to see if this issue disappears.
Solution 3: Use the Startup Repair
When the “no physical memory is available at the location required for the Windows Boot Manager” issue happens, another way you can try is to run a startup repair. To execute this, you should boot your PC into WinRE (Windows Recovery Environment) and then go to Troubleshoot > Advanced options > Startup Repair.
Solution 4: Reset the BIOS Settings to Default
Incorrect BIOS settings may also lead to the “no physical memory is available at the location required” issue. To fix it, you’d better reset the BIOS settings to default.
Step 1: Boot your PC into the BIOS.
Step 2: Find the Setup Defaults option. It might be named Load Default, Load Setup Defaults, Load Default Settings, Load BIOS Defaults or Load Optimal Defaults. Select the specific option and press Enter to open the Setup Confirmation window.
Step 3: After that, click Yes to confirm the operation. Then your PC will restart.
Solution 5: Update the BIOS
Updating the BIOS may help you get rid of the “no physical memory is available at the location required” issue too. You can follow this guide to complete the update: How to Update BIOS Windows 10 | How to Check BIOS Version.
Solution 6: Repair the Boot Manager
The damaged Boot Manager is another possible reason for the “no physical memory is available at the location required for the Windows Boot Manager” issue. On this occasion, you need to repair your Boot Manager with the given steps.
Step 1: Boot your PC into WinRE and then go to Troubleshoot > Advanced options > Command Prompt.
Step 2: Type the following commands in Command Prompt and press Enter after each.
- bootrec/fixmbr
- bootrec/fixboot
- bootrec/ scanos
- bootrec/rebuildbcd
- bootsect /nt60 SYS (or bootsect /nt60 ALL)
Step 3: After the process ends, restart your PC to see if the issue is resolved.
Further reading:
When faced with a Windows Boot Manager error caused by corrupted MBR, you can try to fix it with the bootrec/fixmbr command line or a third-party program like MiniTool Partition Wizard. It’s professional disk partition software that enables you to repair MBR in its bootable version and perform many other tasks related to your partitions and disks.
You don’t need to worry about any issues while using MiniTool Partition Wizard to repair MBR because it’s a reliable and secure program. If you are interested in this program, you can click the button below to download it on your PC and follow this guide to repair your corrupted MBR: Step-by-Step Guide to Repair and Fix MBR Windows 7/8/8.1/10.
MiniTool Partition Wizard DemoClick to Download100%Clean & Safe
Bonus Tip: Fix VirtualBox No Physical Memory Is Available at the Location Required
What can you do if you get stuck in the “VirtualBox no physical memory is available at the location required for the Windows Boot Manager” issue? Well, the most effective method you can try is to delete the problematic virtual machine and then create a new one.
Besides, you can power down the specific virtual machine, click the Settings icon, go to System, and then change Base Memory by dragging the sliding handle. That may solve the “VirtualBox no physical memory is available at the location required for the Windows Boot Manager” issue as well.
Following the above solutions may fix the “no physical memory is available at the location required” issue. For any problems with this issue, leave a message in the comment part below.
About The Author
Position: Columnist
Yamila is a fan of computer science. She can solve many common issues for computer users by writing articles with simple and clear words. The very aspect that she is good at is partition management including create partition, format partition, copy disk and so on.
When she is free, she enjoys reading, doing some excerpts, listening to music and playing games.
Readers help support Windows Report. We may get a commission if you buy through our links.
Read our disclosure page to find out how can you help Windows Report sustain the editorial team. Read more
Booting errors are one of the frustrating things that occasionally plague Windows users. One such error is that no physical memory is available at the location required for the Windows boot manager.
We’ve also noticed a lot of complaints from our readers on this and similar issues like not enough physical memory in VMware. So, this guide will examine the likely causes and solutions.
Why do I encounter no physical memory available at the location required?
The following are some of the reasons why you’re experiencing no physical memory available at the location required:
- Hard drive failure – If the hard drive has been recently damaged, your system won’t be able to boot up. Also, Windows may refuse to boot with the second hard drive if that’s what you are using.
- Corrupted modules – If the memory modules on your computer are not fitted properly, the system might not boot up.
- Damaged CMOS battery – CMOS batteries have about 4 – 5 years’ lifespans. If they’re way past their valid life cycle, it might be the reason you’re experiencing this error.
- BIOS error – You might have accidentally triggered an error if you’ve recently changed the configuration settings of your BIOS. This may also cause Windows to skip BIOS.
Irrespective of the causes, any of the solutions below should fix it.
What can I do if there’s no physical memory at the location required?
Troubleshooting is the only way to resolve system errors. However, users should ensure that they’ve performed the following preliminary checks:
- If you’ve experience handling disk drives, open up the system unit to check if the hard drives and memory modules are tightly fitted. Sometimes, hard disks can be slightly displaced when they experience forceful external contact.
- You can also try narrowing down the problems by inserting your current hard disk into another working computer. This will help you determine if the fault is from the hard disk or your system.
Here are a couple of things you can do to help you resolve this error.
1. Adjust your Boot Sequence
- Hit the power button to turn on the computer.
- To enter the BIOS, hit the F2 or Del button. (Depending on the system’s manufacturer)
- In your BIOS setup, click the Boot tab.
- Reorder the Boot sequence to the following by clicking the + or - keys:
Hard Drive > CD > Removable devices
- Click on the Exit tab and select Exit Saving changes or Save changes.
Your computer will restart once you save your changes and exit the BIOS setup. Try the fixes here should your laptop ignore the boot order on Windows 11.
2. Replace your CMOS Battery
- Disconnect your system’s power cable or remove the battery if it’s a laptop.
- Press and hold the power button to discharge residue electricity.
- Locate the CMOS battery (It looks like a quarter; you can find it on the motherboard.) Hold the motherboard firmly to ensure that you only remove the damaged CMOS battery.
- Replace the battery with a new version of the current cell.
BIOS settings will be erased when you replace a CMOS battery. However, it will fix the no physical memory is available at the location required for the Windows boot manager.
- D3dx11_42.dll Not Found: How to Fix it
- Windows 11 Shutdown After Inactivity: 4 Ways to Stop it
- Windows Shuts Down Instead of Restarting: 4 Ways to Fix it
- Error no Ace Condition 804 (0x324): Fix it With 4 Steps
- Windows 11 Shutdown But User Stays Logged in: How to Fix it
3. Reinstall Windows
- Go to Windows Insider’s download page, select the version you want to download, and click on Confirm.
- Now click on 64-bit Download.
- Press the Windows + E keys to open File Explorer. By default, the file should be in the Downloads folder.
- Expand the Windows 11 ISO file to mount it and double-click on setup.exe.
- Click Next on the welcome screen.
- Once the updates are downloaded, click Accept.
- Choose the Keep personal files and apps option and click Next to proceed.
- Follow the instructions on the screen to complete the process.
Reinstalling Windows will wipe out your entire system files. We recommend you have a working backup before reinstalling Windows.
You should note that this error isn’t similar to the not enough memory in Windows 11. So, you can check our guide to get solutions for that. Further, you can look at what to do if your computer is low on memory.
Let us know in the comment section if you have any other suggestions or solutions.
Loredana Harsana
Windows Software Expert
Loredana is a passionate writer with a keen interest in PC software and technology. She started off writing about mobile phones back when Samsung Galaxy S II was on top of the world and she fell in love with tech of all sorts.
Whenever she’s not at her work desk, you’ll find her enjoying refreshing tea flavors, spilling stories on paper, and listening to the radio.
Windows 10: No physical memory is available at the location required for the windows boot manager. The…
Discus and support No physical memory is available at the location required for the windows boot manager. The… in Windows 10 Software and Apps to solve the problem; It works most of the time but occasionally when I shut down the PC and turn it on again it comes up with this error. If I leave it overnight it usually…
Discussion in ‘Windows 10 Software and Apps’ started by JamesG1585, Apr 1, 2022.
-
No physical memory is available at the location required for the windows boot manager. The…
It works most of the time but occasionally when I shut down the PC and turn it on again it comes up with this error. If I leave it overnight it usually works fine the next day.
-
The avilable physical memory is much lower than my total physical memory ….
- The Physical Available Memory I have is much lower than the Total Physical Memory
-
I have a 8 GB PC running but when I open the task manger for example android studio is taking about 1.855 GB and it’s written above that this is 80% of the memory ….. I thinked that another program is consuming in the background so I switched the view
method in the memory so every program is written in front of it the memory usage percentage and I was shocked when I saw that android studio is consuming about 70% !!!! so the computer is just using 2.83 GB out 8 GB of my memory !!!! - I searched a little bit online till I found that i can see something called the physical available memory … and the total physical memory
- the total physical memory was 8 as expected and available physical memory was about 2.59 GB !!!
- A lot of articles online said that a part of your memory is being consumed by hardware parts like the graphics card ….. but not as much as mine
- I tried a lot of solutions but non of them worked in my case …. But I noticed Something a little bit weird …. every time I restart the device the physical available memory changes …. sometimes 6 sometimes 4 … some times 1.5 !!!!!
- I tried also to reinstall my windows an installed a fresh new windows 10 education ..
- has any one face this problem before ?! or any solutions ??
-
free up available physical memory
hello, i have
Installed Physical Memory (RAM) 4.00 GB
Total Physical Memory 3.91 GB
Available Physical Memory 1.61 GB
Total Virtual Memory 8.79 GB
Available Virtual Memory 6.48 GB
Page File Space 4.88 GB
Page File C:\pagefile.sys
system type 64-bit operating system, x64-based processor
i have installed bluestacks emulator it takes 2GB RAM on my PC and again i have uninstalled without opening it at least one time also due to not working properly. But my available physical memory is only 1.61GB. i think my data lost by that bluestacks emulator.
what i have to do to increase physical memory size in my PC.please help me to increase my physical memory size!!
-
No physical memory is available at the location required for the windows boot manager. The…
High physical memoryThank you for the information you’ve provided.
To eliminate what is causing of high physical memory usage, we suggest performing a
clean boot.Feel free to post back with the result for further assistance.
No physical memory is available at the location required for the windows boot manager. The…
-
No physical memory is available at the location required for the windows boot manager. The… — Similar Threads — physical memory available
-
No physical memory is available at the location required for the Windows Boot Manager. The…
in Windows 10 Gaming
No physical memory is available at the location required for the Windows Boot Manager. The…: I have a Dell Latitude E6530 laptop that somehow went south after a pulled a USB stick out of the computer while the BIOS screen was showing. All the data in all the partitions including Windows 10 PRO are intact. I can view all the files in the directories. The problem is… -
No physical memory is available at the location required for the Windows Boot Manager. The…
in Windows 10 Software and Apps
No physical memory is available at the location required for the Windows Boot Manager. The…: I have a Dell Latitude E6530 laptop that somehow went south after a pulled a USB stick out of the computer while the BIOS screen was showing. All the data in all the partitions including Windows 10 PRO are intact. I can view all the files in the directories. The problem is… -
No physical memory is available at the location required for the Windows Boot Manager. The…
in Windows 10 BSOD Crashes and Debugging
No physical memory is available at the location required for the Windows Boot Manager. The…: I have a Dell Latitude E6530 laptop that somehow went south after a pulled a USB stick out of the computer while the BIOS screen was showing. All the data in all the partitions including Windows 10 PRO are intact. I can view all the files in the directories. The problem is… -
No physical memory is available at the location required. The system cannot continue.
in Windows 10 Gaming
No physical memory is available at the location required. The system cannot continue.: Hello,I have a Dell Latitude E6530 laptop that somehow went south after a pulled a USB stick out of the computer while the BIOS screen was showing. All the data in all the partitions including Windows 10 PRO are intact. I can view all the files in the directories. The problem… -
No physical memory is available at the location required. The system cannot continue.
in Windows 10 Software and Apps
No physical memory is available at the location required. The system cannot continue.: Hello,I have a Dell Latitude E6530 laptop that somehow went south after a pulled a USB stick out of the computer while the BIOS screen was showing. All the data in all the partitions including Windows 10 PRO are intact. I can view all the files in the directories. The problem… -
No physical memory is available at the location required. The system cannot continue.
in Windows 10 Customization
No physical memory is available at the location required. The system cannot continue.: Hello,I have a Dell Latitude E6530 laptop that somehow went south after a pulled a USB stick out of the computer while the BIOS screen was showing. All the data in all the partitions including Windows 10 PRO are intact. I can view all the files in the directories. The problem… -
No physical memory is available at the location required for the windows boot manager. The…
in Windows 10 Gaming
No physical memory is available at the location required for the windows boot manager. The…: It works most of the time but occasionally when I shut down the PC and turn it on again it comes up with this error. If I leave it overnight it usually works fine the next day…. -
No physical memory is available at the location required for the windows boot manager. The…
in Windows 10 BSOD Crashes and Debugging
No physical memory is available at the location required for the windows boot manager. The…: It works most of the time but occasionally when I shut down the PC and turn it on again it comes up with this error. If I leave it overnight it usually works fine the next day…. -
Low available physical memory
in Windows 10 BSOD Crashes and Debugging
Low available physical memory: Hello!I have am HP gaming laptop with 8GB of installed memory, after fixing some other issues I had with it I launch Cities Skylines and notice the game was only using up to 4.5Gb of RAM, so I checked on system information and out of the 7.86Gb of the total physical memory…
I’m getting an error when trying to boot to the local hard disk. The error is: «No physical memory is available at the location required for the Windows Boot Manager. The system can not continue.». This is on an HP bl460c G8 blade server with an Emulex NIC.
I am using the sanboot trick. If I simply exit, iPXE exits the PXE ROM, and then the machine gives the RSOD (red screen of death) with Illegal Opcode.
I am running BIOS version 9/8/13.
Bizarrely, the same machine can boot WinPE (using wimboot) — but not the local disk.
I have another blade server — a bl465 G0 with a Broadcom NIC that will boot just fine.
I’ve also got a VMware VM that will boot just fine.
I wonder if I am trying to do too deep of a chain?
I am using undionly.kkpxe with an embedded script:
Code:
#!ipxe
dhcp
chain http://awebsite/boot.php
which returns
Code:
#!ipxe
sanboot --no-describe --drive 0x80
Thoughts? Suggestions?