The “Windows Sandbox Failed to Initialize” error is a message that users may encounter when attempting to launch the Windows Sandbox feature on their Windows operating system. Windows Sandbox allows users to run applications in an isolated and secure environment. When users see the “Windows Sandbox Failed to Initialize” error, it means that there is an issue preventing the proper startup of the Windows Sandbox environment. In this guide, we’ll fix the Windows Sandbox Failed to Initialize error on Windows 11/10, the causes behind this error, and straightforward solutions to get your Windows Sandbox back on track.
Page Contents
Here are common reasons for the Windows Sandbox failed to initialize error:
- Virtualization not enabled: Virtualization needs to be enabled in the BIOS/UEFI settings.
- Hyper-V conflicts: Hyper-V may conflict with Windows Sandbox. Ensure only one is enabled at a time.
- Windows Sandbox feature not installed: The Windows Sandbox feature must be installed through the Windows Features menu.
- Windows Update: Ensure the Windows operating system is up to date with the latest updates.
- Third-party software conflicts: Some third-party antivirus or security software may interfere with Windows Sandbox.
- Hardware requirements: Check if the system meets the hardware requirements for Windows Sandbox.
- Graphics driver issues: Outdated or incompatible graphics drivers can cause problems with Windows Sandbox.
Below are several effective solutions to fix the “Windows Sandbox Failed to initialize” error:
Solution 1: Run the Windows Services Required by Sandbox
1. Press the Windows key + R. Type “services.msc” and click OK.
2. Right-click on the “Hyper-V Remote Desktop Virtualization Service” option and select “Properties”.
3. Make the startup type “Automatic” and then click on the “Start” button.
4. Click OK followed by Apply.
Solution 2: Use Built-in Troubleshooting Tools
1. Open the Command Prompt and run as administrator.
2. Type the following command and press Enter:
msdt.exe -id DeviceDiagnostic
Press Enter.
3. This will open the Device Diagnostic troubleshooter. (See the below image)
Click Next.
Follow the on-screen instructions to troubleshoot the problem.
Solution 3: Restore Windows
1. Open the search bar and type “Create a Restore Point” and select “Best match“.
2. Under the System Protection tab, click on the “System Restore” option. Press Next.
3. Now, select “Show more restore points“.
4. Select the preferred restore point and then click Next.
5. Finally, click the “Finish” option.
Solution 4: Update Your Device
1. Open the Settings App and go to Windows Update.
2. Now, click on “Check for Updates“.
3. If there is any update available, then update your device.
Solution 5: Restart Hyper-V on Windows Features
1. Press the Windows key + R. Type “optionalfeatures” and press Enter.
2. Expand the Hyper-V option.
3. Uncheck the “Hyper-V Management Tools” and “Hyper-V Platform” options.
4. Click OK.
Solution 6: Repair Corrupted or Missing System Files
1. Open the command prompt and run as administrator.
2. Copy and paste the below command:
DISM /Online /Cleanup-Image /ScanHealth
Press Enter.
Wait for the command to execute.
3. Now, copy and paste the below command:
sfc /scannow
Press Enter.
4. Restart the PC after executing the above commands.
Solution 7: Disable/Re-Enable Windows Sandbox Tool
1. Press the Windows key + R. Type “optionalfeatures” and press Enter.
2. Uncheck the “Windows Sandbox” option. Click OK.
3. A dialog box will appear. Select the “Restart now” option.
4. When the device boots up, check the “Windows Sandbox” box.
5. Again, a dialog box will appear. Select the “Restart now” option.
That’s It!
RELATED ARTICLES
The Windows Sandbox tool acts as a temporary virtual desktop environment. However, while trying to use this tool, you might bump into the “Windows Sandbox failed to start” error. This post from MiniTool tells you how to fix it.
Windows Sandbox is helpful, especially when you download an executable file or an app from risky sources and install it in Sandbox. However, when you try to start Windows Sandbox on Windows 11, you may meet the “Windows Sandbox failed to initialize” issue or “Windows Sandbox failed to start” issue.
Tips:
Tip: It’s recommended to back up your important data in advance since the apps you download may be malware which could hurt your computer and lead to the “data loss” issue or even corrupt your Windows. To do that, you can try the professional backup software – MiniTool ShaodwMaker.
MiniTool ShadowMaker TrialClick to Download100%Clean & Safe
Besides, the issue always comes with different error codes, such as:
- Windows Sandbox failed to initialize. Error 0x80004001. Not implemented.
- Windows Sandbox failed to initialize. Error 0x800700cb. The system could not find the environment option that was entered.
- Windows Sandbox failed to start. Error 0x80070015. The device is not ready.
- …
The following lists some reasons for the issue:
- Services are disabled
- System files are corrupt or missing
- System requirements don’t meet
- The Sandbox feature is not enabled
- Third-party antivirus software
- Outdated graphics driver
Here, we provide some solutions for the “Windows Sandbox failed to initialize” issue:
You can disable and re-enable the Windows Sandbox tool to fix the “Windows Sandbox failed to initialize” issue.
Step 1: Type Windows Features in the Search box.
Step 2: Locate Windows Sandbox and uncheck the box and click OK. Then, check it again and click OK.
Fix 2: Start Sandbox Services
The Sandbox error usually appears when some of Windows’ services are disabled. So, you can start them to fix the issue:
Step 1: Press Win + R to open the Run dialog box. Type services.msc and press Enter.
Step 2: Locate the Hyper-V Remote Desktop Virtualization Service, right-click it to select Properties.
Step 3: Next, go to the General tab and click the Startup type drop-down menu to select Automatic.
Step 4: Click the Start > Apply > OK to save these changes.
Fix 3: Restart Hyper V and Other Programs
It’s recommended to restart the Hyper V and other programs to fix the “Windows Sandbox failed to initialize” issue.
Step 1: Type Windows Features in the Search box.
Step 2: Find Virtual Machine Platform and Windows Hypervisor Platform, and check the boxes beside them.
Step 3: Click the OK button.
Fix 4: Try the Troubleshooter
If the Sandbox error is caused by hardware-related problems, you can fix it with the Hardware and Devices troubleshooter.
Step 1: Press Windows+ I to open Settings.
Step 2: Go to System, then click Troubleshoot and click Other troubleshooters.
Step 3: Select hardware or device and click Run. Follow the onscreen instructions and restart the computer.
Fix 5: Run SFC
You can also run SFC to fix the “Windows Sandbox failed to initialize” issue. Follow the guide:
Step 1: Launch Command Prompt as administrator.
Step 2: Type sfc /scannow and press Enter. This process may take you much time to scan, and you just need to wait patiently.
Fix 6: Restore Windows to the Previous State
If you have created a system restore point or system image backup with Windows snap-in tools, you can try using the restore point to restore your computer to fix the error message. Here are the steps:
Step 1: In the Search menu, input control panel and open it.
Step 2: Click Recovery and click Open System Restore to continue.
Step 3: In the Restore system files and settings interface, click Next to continue.
Step 4: Select a restore point and click Next to continue.
Step 5: You need to confirm the restore point and click Finish. After the system restore is finished, try to shut down your computer again.
Fix 7: Check for Updates
It’s recommended to update your Windows 11/10 to the latest version to remove the annoying issue. Follow the guide below:
Step 1: Press the Windows + I keys together to open Settings.
Step 2: Go to Updates & Security.
Step 3: Click the Windows Update section, and click the Check for updates button to check if there are any new updates. Then Windows will search for available updates. Just follow the on-screen instructions to finish the process.
Final Words
Here are all of the methods to fix the “Windows Sandbox failed to initialize” issue on Windows 11/10. You can try them one by one. I hope that this post can be useful to you.
Windows Sandbox is a temporary virtual machine offering a lightweight desktop environment to install and run apps in isolation. However, this feature is not available on the Home edition of the venerable OS.
Even if you have a compatible edition of the OS, say Windows 11 Pro, Windows Sandbox can still malfunction and stop working. If so, here are a few ways to troubleshoot and fix when the Windows Sandbox stops working on your Windows 11 computer.
1. Remember—Windows Sandbox Is Not Available on Windows 11 Home
Like many of the advanced Windows features, Windows Sandbox is not available on the Home edition of the operating system. Even if you install the necessary files to run Windows Sandbox on Windows 11 Home, you’ll encounter the «Windows Sandbox failed to initialize» error.
If you don’t know if you’re using Windows Home or not, you can find out in the About section of the Settings app. Follow these steps to do that:
- Press Win + I to open Settings.
- In the System tab, scroll down and open the About section.
- Expand the Windows specifications tab.
- Look for the Edition entry to know your OS edition.
If you are running the Home edition, and don’t want to upgrade, consider using an alternative. There are plenty of Windows Sandbox alternatives for Windows 11 that offer similar functionalities and additional features.
2. Check if Windows Sandbox Is Enabled
Some advanced features on Windows 11 are disabled by default, including Windows Sandbox. You’ll need to manually enable Windows Sandbox from the Windows Features dialog to use the feature.
Alternatively, you can also use Windows PowerShell and the Command Prompt to install the virtual desktop environment. If Windows Sandbox is already enabled, try to disable and re-enable it to see if that helps resolve the issue.
To re-enable Windows Sandbox:
- Press Win + R to open Run.
- Type optional features and click OK.
-
In the Turn Windows features on or off dialog, scroll down and uncheck the Windows Sandbox option.
- Click OK and wait for Windows to uninstall and disable the feature.
- Next, restart your PC to apply the changes.
- After the restart, open the Turn Windows Features on or off dialog. Locate and select the Windows Sandbox option and click OK. Wait for the installation process to complete, and then restart your computer.
3. Check if the Windows Sandbox Associated Services Are Running
Windows Sandbox needs the Hyper-V Host, Hyper-V Time Synchronization and the Virtual Disk service to be running to work. If one or more services are stopped, it may fail to start.
Using the Windows Services snap-in, you can verify the status and restart the services if necessary. Follow these steps to know how to do it.
To restart Windows Sandbox-related services:
- Press Win + R to open Run.
- Type services.msc and click OK to open the Services snap-in.
- Next, locate the Network Virtualization Service.
- Right-click on the service entry and Stop. If you get an error, skip to the next step.
- Once stopped, right-click on the service once again and select Restart.
-
Next, perform a similar stop-and-start action for the following services:
Virtual Disk
Hyper-V Host Computer Service
Container Manager Service
Hyper-V Time Synchronization - After restarting all the services, close the Services snap-in and open Windows Sandbox to see if it’s working.
4. Disable Any Active VPN Connections and Firewalls
If Windows Sandbox cannot access the internet, check if you are using a VPN, as it may cause issues with Windows Sandbox. Check and turn off any VPN clients open on your computer to see if that resolves the issue.
Alternatively, press Win + I to open the Settings app and go to Network & Internet > VPN. Here, click disconnect to turn off any active VPN connection.
In addition, a third-party firewall may be triggering the issue. So, temporarily disable any third-party antivirus and firewall on your computer.
5. Change Windows Sandbox Security Settings
Changing the Windows Sandbox security setting and allowing the app to have full control may fix any issues triggered due to permission problems.
To edit Windows Sandbox security settings:
- Press the Win key and type Windows Sandbox.
-
Right-click on the app name and select Open File Location.
-
In File Explorer, right-click on the Windows Sandbox icon and select Properties.
- In the Properties dialog, open the Security tab.
-
Click the Edit button. Click Yes if prompted by UAC.
-
Next, select the Allow option for Full Control.
- Click Apply and OK to save the changes.
- Close the Properties dialog and open Windows Sandbox to see if the issue is resolved.
6. Additional Troubleshooting Steps You Can Try
If the issue persists, it may be a case of corrupt or damaged system files. You can use the built-in system repair tools or perform a system restore to undo recent changes to your system to fix the problem.
Let’s look at additional troubleshooting steps to help you fix issues with Windows Sandbox.
1. Install Windows Updates – If it is a known bug, check if a new hotfix is available via Windows updates. To check for new Windows updates:
- Press Win + I to open Settings.
- Open the Windows updates tab.
- Click on Check for updates. Install all the critical updates and check for any improvements.
2. Repair corrupted system files – You can run the built-in command-line utility to repair damaged or missing Windows system files. Use the System File Checker and Deployment Image Servicing and Management (DISM) tool to find and fix critical system issues.
3. Uninstall a recently installed Windows update – Keeping your computer updated with the latest Windows patches is always recommended. However, some updates can cause crashes and issues with system apps. If you have installed an update recently, try to manually uninstall the Windows 11 update to see if it resolves the error.
4. Perform a system restore — If you have made any changes to your computer recently and determine it has caused Windows Sandbox issues, perform a system restore.
Depending on your System Protection configuration, you can perform a system restore to undo recent changes to revert your system to an earlier point to recover from malfunctions.
7. Reset or Reinstall Windows 11
If all else fails, a reset may be necessary to fix issues causing the Sandbox to malfunction. Windows offers multiple reset options.
First, there is a repair reinstall option. By using a bootable drive or mounted ISO image, you can reinstall Windows 11. This is preferable as it allows you to reinstall Windows without deleting apps and data.
If not, you can perform a factory reset to reinstall the Windows OS. This will remove all your installed apps but won’t affect your personal files and other data. There is an option to completely wipe your computer and start from scratch.
To perform a reset:
- Press Win + I to open Settings.
-
With the System tab selected, scroll down and select Recovery.
-
Next, click on Reset PC.
- Select the Keep my files option to reinstall the OS while keeping your personal files. This will delete your apps and settings.
-
Select the Remove everything option to remove everything and reinstall the OS.
- Next, you’ll see two more options. Cloud download will download a fresh copy of Windows OS and perform a reinstall. If you don’t want to wait or don’t have a reliable Internet connection, select Local Reinstall.
- Next, follow the on-screen instructions to complete the reset process.
8. Perform a Clean Install
A clean install is necessary when your system encounters a critical issue resulting in malfunctioning. You can create a bootable Windows 11 USB drive to perform a clean install. However, the easiest way to reinstall Windows 11 is by using the Windows 11 media creation tool. Here’s how to do it.
Before you proceed, here are a few things to remember before your clean install Windows. This includes backing up your important data as a clean install will wipe clean your system. Once you have a backup and take other precautions, follow these steps to perform a clean install.
- Go to the Microsoft Windows 11 download page and download the Windows 11 Media Creation Tool.
- Connect a USB flash drive you intend to use as a bootable drive. Make sure it has at least 8GB of space. If you don’t have a USB drive, make sure your installation drive (C:\) has at least 8GB of space to download the ISO file.
- Next, run the mediacreationtool.exe file and click Accept.
- Uncheck the Use the recommended options for this PC option if you want to change the language and edition. Click Next.
- Next, select a USB flash drive or ISO file from the media option.
- Click Next.
- Once you have the bootable drive or ISO image, you can perform a clean install of Windows 11 with a few more steps.
Restore the Windows Sandbox on Windows 11
Windows Sandbox can stop working due to several reasons. To fix the problem, check the app’s security settings, disable your firewall, and review if the essential services are running. As a last resort, you may need to perform a repair, reinstall, or clean install to get the testing environment working again.
Windows 11 Pro and Enterprise come with the Sandbox tool that lets you run, download, install, and run unknown & untested programs in an isolated environment on your computer. No doubt, it’s a great functionality and, most of the time, works properly. But sometimes, it starts acting strangely.
For instance, it doesn’t open on the computer and shows the “Error 0x80070015: Windows Sandbox failed to start—the device is not ready” error message. If you’re getting the same error message or experiencing some other issue with the Sandbox tool on your Windows 11 PC, follow us to fix them in this in-depth guide.
Why Is Sandbox Not Working on Your Windows PC?
Below listed could be one of the reasons for the Sandbox not working issue on your Windows 11 PC:
- Sandbox Isn’t Enabled
- Not Using Windows 11 Pro or Enterprise
- Enabled VPN
- Third-Party Firewall
- Required Windows Services Aren’t Working
- Hyper-V Isn’t Working
- Corrupted or Missing System Files
- Misconfigured Security Properties
- Bugs & Glitches in the Device
- Outdated Windows PC
Fix Sandbox Not Working in Windows 11
Several solutions can fix the Sandbox not working issue on your Windows 11 PC or laptop. But below, we’ve mentioned some most effective yet working workarounds to fix it:
1. Make Sure Sandbox Is Enabled
This may look a bit neglected. But it could be possible that the Sandbox functionality isn’t enabled on your PC. As a result, it isn’t working on your Windows 11 PC and causing this issue.
Thus, we suggest you make sure that the Sandbox tool is enabled on your Windows PC. You can follow the below prompts to know how to check the same on your PC same with ease:
1. Open the Settings app on your Windows 11 PC and select Apps from the left pane menu.
2. Click the Optional features option and then select More Windows features at the bottom.
3. In the next window, search for the Windows Sandbox option in the list of available options.
4. Lastly, make sure the checkbox next to Windows Sandbox is checked. If not, then check it.
2. Ensure You’re Using Windows 11 Pro or Enterprise Edition
It’s quite basic, and you should know that the Windows Sandbox tool only comes with Windows 11’s Pro and Enterprise editions. So it could be possible that you’re using Windows 11 Home edition, due to which you aren’t getting the Sandbox functionality. If you don’t know which Windows 11 edition you’re using, follow the steps to know the same:
1. Launch Settings on your Windows 11 PC or laptop and proceed to the About section of it.
2. Go to Windows specifications and look for the Windows 11 edition you’re currently using.
If your Windows 11 edition isn’t Pro or Enterprise, upgrade it to them to use this functionality.
3. Restart Your PC
It could be possible that issues with Sandbox are occurring due to some temporary glitches in the computer. In that case, we suggest you reboot your Windows 11 PC or laptop and see if Sandbox works afterward. Restarting the PC can fix the issues with it in one go, and they may not appear again. So try restarting your PC by following the below steps:
1. Press the Alt and F4 keys at the same time on your keyboard to get the Shut Down Windows prompt.
2. Select the Restart or Update and restart option from the dropdown in the box and press Enter.
3. Once the PC is restarted, try accessing Windows Sandbox again to check whether it’s working.
4. Disable & Re-enable the Windows Sandbox Tool
If restarting the PC doesn’t fix the issue, consider disabling the Windows Sandboad tool and re-enabling it on your Windows 11 PC. Doing so will fix all the temporary issues with it and make it work. You can easily try the same by following the below prompts:
1. Open the Settings app on your Windows 11 PC and move to the Apps section from the left.
2. Select Optional features and then click the More Windows features button on the next screen.
3. Search for the Windows Sandbox option in the Turn Windows features on or off prompt.
4. Untick the box next to Windows Sandbox, wait for a few minutes, and tick it again to re-enable it.
5. Disconnect VPN
Another possible reason for the Sandbox not working issue on your PC could be an enabled VPN. So, if you’re using a third-party VPN on your PC, we suggest you temporarily disable it. In case you’re using Windows integrated VPN, follow the below steps to disable it:
1. Open the Settings app on your Windows 11 PC and head to the Network & internet section.
2. Choose the VPN option and then look for the VPN connection you want to disconnect.
3. Click the Disconnect button to disconnect from the particular VPN connection and check the status of the issue.
6. Disable Third-Party Firewall
If you’re using a third-party antivirus on your PC, we suggest you temporarily disable it, as antivirus creates an additional firewall to prevent viruses from entering your Windows 11 PC or laptop and causing damage. But sometimes, it interferes with the system’s integral functions and breaks them. So try disabling or uninstalling it to see if it fixes the issue.
7. Run the Required Windows Services
The working of the Sandbox tool also depends on the working of various integral Windows services. For instance, you must ensure that the Hyper-V Host service is working properly on your PC.
Besides, there are a few more services that must be working for the proper working of the Sandbox functionality. So make sure that the mentioned services are working properly on your Windows 11 PC or laptop. You can make sure the same by trying the below steps:
1. Press the Windows + R keys at the same time to open Run and type Services.msc in it.
2. Press the Enter key to open the Services utility on your PC and look for the listed services:
- Hyper-V Host
- Hyper-V Time Synchronization
- Virtual Disk
3. Right-click on any of the mentioned services, and select the Properties option from the context menu.
4. Click the Start button to start the Windows service if it’s not working on your PC or laptop.
5. Once done, go to the Recovery tab and set the First failure option to Restart the Service.
6. Set the Second failure dropdown to Restart the Service and click the Apply button to save the changes.
7. Do the same with other listed services and check if the Sandbox not working issue is fixed.
8. Restart Hyper-V
To avoid the Sandbox not working issue on your PC, you must ensure that Hype-V is working on it. So make sure the same on your Windows PC by following the below-listed steps:
1. Open Settings on your Windows 11 PC and proceed to the Apps section of it from the left.
2. Select the Optional features option and then click More Windows feature on the next screen.
3. Search for the Hyper-V Platform option in the next prompt and untick the checkbox next to it.
4. Once done, tick the checkbox again to restart it and check if Sandbox is now working properly.
9. Repair Corrupted or Missing System Files
Another possible reason for the Sandbox not working issue on your Windows PC could be a corrupted system or missing files. Thus, we suggest you run a DISM scan on your computer to fix the corrupted Windows image. Once that’s done, execute the SFC scan to get the missing files back. You can follow the listed steps to know how to run both scans:
1. Open the Command Prompt utility on your Windows 11 computer with administrative rights.
2. Once Command Prompt is opened, run the below command in it to start the DISM scan.
DISM /online /cleanup-image /checkhealth3. Once the above command is executed, run the below-mentioned command in the same console:
DISM /online /cleanup-image /scanhealth4. After executing the DISM scan, run the sfc /scannow command to start the SFC scan on your PC.
5. Once both scans are completed, restart your computer and check if the issue is resolved.
10. Edit Security Properties
The next possible solution to make the Sandbox work again is to modify Sandbox’s security properties. The best is that it has worked for some users. Thus, we suggest you do the same and check if it works for you. You can easily try the same by following the below steps:
1. Open the File Explorer utility on your PC and right-click on Windows Sandbox on the left.
2. Select the Properties option from the contextual menu and move to the Security tab of it.
3. Click Edit and tick the Full control checkbox under Permissions for Windows Sandbox.
4. Once done, click the Apply button and then OK to apply all the changes and fix the issue.
11. Run the Hardware and Devices Troubleshooter
Sandbox may not be working properly on your Windows 11 PC because of some hardware errors. So, we suggest you run the Hardware and Devices troubleshooter on your Windows 11 PC to eliminate all the hardware issues that are causing these issues. Follow the below-mentioned instructions to run this troubleshooter on your computer:
1. Press the Windows key, type cmd in it, and choose Run as administrator from the results.
2. Click Yes in the UAC prompt to open the Command Prompt utility with administrative rights.
3. Type the below command in it and press Enter to open the Hardware and Devices troubleshooter.
msdt.exe -id DeviceDiagnostic
4. Click Next in the Hardware and Devices prompt and let it detect issues with the system.
5. Follow the on-screen steps to resolve all the issues with your system’s hardware and fix this issue.
12. Update Your Device
Another common yet effective solution to make the Sandbox functionality work on your PC is to update it, as the temporary bugs & glitches in the PC could also be the reason for this issue. You can follow the mentioned steps to update your Windows 11 PC or laptop:
1. Open the Settings program on your Windows 11 PC and click Windows Update at the top.
2. Click Check for updates to scan for new updates and install them on your Windows 11 PC.
3. Lastly, click the Download & install all button to install the available updates on your PC.
Once the Windows PC is updated, restart your system and check whether Sandbox is working now.
13. Restore Windows
If the issue is still there, we suggest you revert your Windows 11 PC to a previously created restore point. Doing so will revert all the changes to the system that you had made after creating the particular restore point, which will also resolve the Sandbox not working issue. You can follow the below steps to know how to restore your Windows 11 PC:
1. Open Windows Search Box, type Create a restore point in it and select it from the search.
2. Click the System Restore… button and then click the Next > button in the window to go ahead.
3. Select the restore point you want to revert your system to and then click the Next > button.
4. Click Finish to begin the restoration process to revert the PC to the selected system restore point.
14. Reset the PC
Last but not least, if none of those mentioned above workarounds help you fix the malfunctioned Sandbox feature, then you’ve no other option left than completely resetting your PC.
Doing so will delete all the data stored on your PC, revert settings to default, and fix the issue. So, if you’re ready to try this fix, follow the below-mentioned instructions to apply it:
1. Proceed to the Recovery section of the Settings program and click the Reset PC button.
2. Select the Remove everything option and then choose Cloud download or Local reinstall.
3. On the Additional settings window, click the Next button and then again click the Next button.
4. Click the Confirm button and, finally, click the Reset button to start resetting your computer.
Hopefully, the Windows Sandbox not working issue is fixed on your Windows 11 PC or laptop.
FAQs
Does Windows Sandbox Work in Windows 11?
The Sandbox functionality only works in Pro & Enterprise editions of the current Windows 11.
How Do I Enable Windows Sandbox 11?
You can go to the below-mentioned path to enable Windows Sandbox on your Windows 11 PC:
Settings > Apps > Optional Features > View Features > More Windows Feature > Tick Windows Sandbox
Why Can’t I Turn On Windows Sandbox?
One of the most prevalent reasons for not being able to find or turn on the Windows Sandbox option isn’t using the required Windows 11 edition. Other possible reasons could be corrupted or missing system files, outdated Windows 11 OS, third-party VPN & firewall, etc.
How Do You Reset the Sandbox on Windows 11?
To completely reset the Sandbox on your Windows 11 PC, you must re-enable it from Settings.
Is Windows 11 Sandbox the Same As Hyper-V?
No. The Sandbox functionality in Windows 11 isn’t the same as the Hyper-v or VirtualBox function.
Final Note
Sandbox in Windows is indeed a great functionality. But some users are currently facing issues with Sandbox on their Windows 11 PC or laptop. A few users are experiencing internet issues with it.
At the same time, some are unable to run and test apps in it. In case you’re having similar issues with Sandbox on your Windows 11 PC, we hope they’re fixed now. If yes, then do let us know which mentioned fixes the Sandbox not working issue.
Все способы:
- Способ 1: Включение Windows Sandbox
- Способ 2: Активация виртуализации
- Способ 3: Переустановка компонентов Microsoft Visual C++
- Дополнительные решения проблемы
- Вопросы и ответы: 1
Способ 1: Включение Windows Sandbox
«Песочница» в Windows 10 представляет собой временную среду с рабочим столом для изолированного запуска сторонних приложений. По умолчанию она доступна только в таких редакциях, как Windows 10 Pro и Enterprise, но при желании ее можно активировать и в Домашней редакции операционки. Для этого потребуется специальный скрипт, за счет которого встроенная утилита DISM установит все необходимые программные компоненты в систему.
Перед тем как переходить к включению «Песочницы» через скрипт, отметим, что процедура не всегда завершается успешно, и гарантировать полную работоспособность невозможно. Лучше предварительно создать точку восстановления, чтобы была возможность откатить состояние системы в случае непредвиденных обстоятельств.
Подробнее:
Инструкция по созданию точки восстановления Windows 10
Откат к точке восстановления в Windows 10
Если ранее виртуальная среда уже включалась, то это могло произойти не совсем правильно, отчего возникают проблемы с использованием функции. Ниже мы предлагаем руководство по созданию скрипта, который должен работать:
- Запустите встроенный «Блокнот». Найти его можно в главном меню или с помощью строки системного поиска.
- В окне редактора вставьте такое содержимое:
@echo off
echo Checking for permissions
>nul 2>&1 "%SYSTEMROOT%\system32\cacls.exe" "%SYSTEMROOT%\system32\config\system"
echo Permission check result: %errorlevel%
REM --> If error flag set, we do not have admin.
if '%errorlevel%' NEQ '0' (
echo Requesting administrative privileges...
goto UACPrompt
) else ( goto gotAdmin )
:UACPrompt
echo Set UAC = CreateObject^("Shell.Application"^) > "%temp%\getadmin.vbs"
echo UAC.ShellExecute "%~s0", "", "", "runas", 1 >> "%temp%\getadmin.vbs"
echo Running created temporary "%temp%\getadmin.vbs"
timeout /T 2
"%temp%\getadmin.vbs"
exit /B
:gotAdmin
if exist "%temp%\getadmin.vbs" ( del "%temp%\getadmin.vbs" )
pushd "%CD%"
CD /D "%~dp0"
echo Batch was successfully started with admin privileges
echo .
cls
GOTO:menu
:menu
Title Sandbox Installer
echo Select Action
echo 1 Install
echo 2 Uninstall
echo 3 Exit
set /p uni= Enter your option:
if %uni% ==1 goto :in
if %uni% ==2 goto :un
if %uni% ==3 goto :ex
:in
cls
Title Install Sandbox
pushd "%~dp0"
dir /b %SystemRoot%\servicing\Packages\*Containers*.mum >sandbox.txt
for /f %%i in ('findstr /i . sandbox.txt 2^>nul') do dism /online /norestart /add-package:"%SystemRoot%\servicing\Packages\%%i"
del sandbox.txt
Dism /online /enable-feature /featurename:Containers-DisposableClientVM /LimitAccess /ALL /NoRestart
goto :remenu
:un
cls
Title Uninstall Sandbox
pushd "%~dp0"
Dism /online /disable-feature /featurename:Containers-DisposableClientVM /NoRestart
dir /b %SystemRoot%\servicing\Packages\*Containers*.mum >sandbox.txt
for /f %%i in ('findstr /i . sandbox.txt 2^>nul') do dism /online /norestart /remove-package:"%SystemRoot%\servicing\Packages\%%i"
del sandbox.txt
goto :remenu
:remenu
cls
echo Restart computer?
echo 1 Yes
echo 2 No
set /p uni= Input 1 or 2:
if %uni% ==1 goto :re
if %uni% ==2 goto :ex
:re
shutdown /r /t 0 /f
goto :ex
:ex
exit - Кликните по вкладке «Файл» в «Блокноте», затем выберите пункт «Сохранить как».
- В открывшемся окне укажите путь, куда будет сохранен будущий скрипт, затем в меню «Тип файла» выберите «Все файлы» и задайте имя документу, обязательно прописав его расширение —
.bat. - Запустите скрипт и дождитесь окончания установки необходимых компонентов. После потребуется перезагрузить компьютер и проверить, работает ли «Песочница» в данной редакции ОС.
При активации функции Windows Sandbox в редакции Windows 10 Home нет гарантий, что она будет работать стабильно. В некоторых случаях все дело в самой операционке, и сделать с этим вряд ли что-то получится (разве что перейти на другую редакцию для использования инструмента). Иногда же проблема кроется в недостатке других компонентов либо в отключенных службах виртуализации. Если после создания и запуска скрипта у вас отобразилось сообщение, что «Песочницу» не удалось инициализировать, попробуйте воспользоваться нашими рекомендациями ниже, чтобы исправить ситуацию.
Способ 2: Активация виртуализации
В первую очередь проверьте, активна ли виртуализация. Делается это с помощью встроенных средств системы или через BIOS/UEFI компьютера. Но в ситуации с Windows 10 Home рекомендуем воспользоваться вторым вариантом, поскольку программный компонент Hyper-V, отвечающий за виртуализацию на основе гипервизора, попросту может отсутствовать в редакции Home. О том, как активировать виртуализацию для процессоров AMD и Intel, ранее мы писали более развернуто.
Подробнее: Включаем виртуализацию в BIOS
Если процессор не поддерживает виртуализацию, тогда запустить «Песочницу» в Домашней редакции «десятки» вряд ли получится.
Способ 3: Переустановка компонентов Microsoft Visual C++
Для корректной работы многим компонентов системы требуется наличие файлов библиотеки Microsoft Visual C++. Windows Sandbox – не исключение, поэтому проверьте, присутствуют ли нужные данные. Если нет, их потребуется дополнительно установить. Также дело может быть в том, что они повреждены. В любом случае после запуска инсталлятора будет предложено восстановить недостающие файлы.
- Если ранее компоненты библиотеки Microsoft Visual C++ были установлены, перед переустановкой их нужно удалить с компьютера, чтобы избежать возможного конфликта ПО. Если софт не инсталлировался, сразу переходите к Шагу 4 данной инструкции. Для начала потребуется открыть раздел «Программы и компоненты»: одновременно нажмите на клавиши «Win + R», затем введите команду
appwiz.cplи нажмите на кнопку «ОК». - Найдите строку «Microsoft Visual C++» с версией софта, выделите ее и нажмите на кнопку «Удалить». Если компонентов несколько, проделайте процедуру с каждым из них и перезагрузите компьютер.
- Перейдите по ссылке ниже, чтобы скачать инсталлятор библиотеки с официального сайта компании Microsoft. Причем загружать нужно тот файл, который соответствует разрядности вашей системы.
Скачать Microsoft Visual C++ с официального сайта
Читайте также: Определяем разрядность используемой ОС Windows 10
- Далее останется запустить скачанный файл и установить нужное программное обеспечение, следуя инструкциям пошагового мастера.
Если же установщик нашел файлы библиотек, но оказалось, что они повреждены, он предложит их восстановить.
Дополнительные решения проблемы
Если предлагаемые выше способы не помогли, тогда следует проверить целостность системных файлов, поскольку при их повреждении системные функции и компоненты могут работать некорректно. Для этого в Windows предусматривается специальная утилита, которая запускается через консоль «Командная строка». Более детально о способах восстановления данных системы мы писали в отдельном материале.
Подробнее: Как проверить целостность системных файлов в Windows 10
Также можете проверить наличие актуальных версий драйверов для устройств и программных компонентов системы, от чего во многом зависит и работа самой операционки. В этом помогут как встроенные возможности «десятки», так и сторонние приложения для проверки и обновления ПО.
Подробнее: Как проверить обновления драйверов в Windows 10
В качестве альтернативного варианта, если так вышло, что в Windows 10 Home не удалось установить «Песочницу», которая свойственна другим редакциям системы, есть смысл воспользоваться виртуальной машиной VirtualBox или VMWare. Установите на нее Виндовс 10, после чего запустите подозрительный софт. Принцип будет тем же — вы откроете приложение в безопасной для основной ОС среде, поскольку действия, совершаемые внутри виртуалки, не влияют на хостовую Windows. Добавим, что такие эмуляторы требуют виртуализации, поэтому ваш процессор должен ее поддерживать.
Подробнее: Включение виртуализации в Windows 10 через виртуальную машину
Несмотря на то что такой метод кажется довольно трудоемким, иногда он является единственным выходом.
Подробнее: Как установить Windows 10 в VirtualBox
Наша группа в TelegramПолезные советы и помощь