Maintaining accurate time on your server is critical largely because many services and IT applications rely on accurate time settings to function as expected. These include logging services, monitoring and auditing applications, and database replication to mention a few.
Time skew in servers, and any client systems for that matter, is undesirable and usually causes conflict in time-critical applications. To maintain accurate time settings on your server and across the network by extension, it’s preferred to install and enable a NTP server on your server.
What is an NTP server?
NTP, short for Network Time Protocol, is a protocol that synchronizes time across network devices. It listens on UDP port 123 and always ensures that time inconsistencies across the server and client systems are mitigated and that client systems are always in sync with the server.
NTP server refers to a network device or a service that fetches time from an external time source and syncs the time across the network using the NTP protocol. This guide will focus on installing NTP service on Windows server 2019.
How Does NTP Work ?
Being a protocol, NTP requires a client-server architecture. The NTP client residing on a Windows PC, for example, initiates a time request exchange with the NTP server.
A time-stamp data exchange happens between the server and client and this helps in adjusting the clock on client’s systems to the highest degree of accuracy to match the time on the NTP server. In this guide, we will walk you through the installation and configuration of NTP server on Windows Server 2019.
There are several ways of setting up NTP server and we will look at each in turn.
In Windows Server environments, there is a special Windows time service that handles time synchronization between the server and the client systems. This is known as Windows Time service. PowerShell provides a command-line tool known as w32tm.exe and comes included in all versions of Windows from Windows XP and Windows Server 2008 to the latest versions of each OS.
Using the w32tm.exe utility, you can configure your Windows system to sync with online time servers. Usually, this is the tool of choice when setting up and monitoring time on your Windows Server system.
Using the command-line utility is quite straightforward.
For example, to set the Server to point to 2 different time servers, namely 0.us.pool.ntp.org and 1.us.pool.ntp.org , launch PowerShell as the Administrator and run the command below
w32tm /config /syncfromflags:manual /manualpeerlist:”0.us.pool.ntp.org 1.us.pool.ntp.org” /update
Then restart Windows Time service using the commands:
Stop-Service w32time
Start-Service w32time
Here’s a snippet of the commands.
You can thereafter confirm the values of NTP servers configured in the registry by running this command:
w32tm /dumpreg /subkey:parameters
Configure NTP Server on Windows Server 2019 using Registry editor
The second method of installing and configuring the NTP server is using the registry editor. If you are not a fan of the Windows PowerShell, then this will truly come in handy.
To get started, open the registry editor. Press ‘Windows key + R’ and type ‘regedit’ and hit ENTER. The windows registry will be launched as shown below.
Next, head over to the path shown below
Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\TimeProviders\NtpServer
On the right pane. Be sure to find & double-click the file labelled ‘Enabled’ in the diagram shown below.
Next, In the ‘value data’ text field, set the value to ‘1’ and click the ‘Ok’ button.
Next, head over to the path:
Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config
In the right pane, double click the ‘Announce Flags’ file.
Double-click the file and in the Value data text field, type the value ‘5’ and click ‘OK’.
For the changes to come into effect, you need to reboot the NTP server by heading to the services Window. To achieve this, press ‘Windows key + R’ and type ‘services.msc’. Scroll and find ‘Windows Time’, right-click on it and select the ‘Restart’ option.
Useful w32tm commands
Once you have set up your NTP server, you can use the following commands to verify various aspects of the server:
To check the status of the NTP server, run the command:
w32tm /query /status
To reveal the current NTP pool being used to sync time with execute:
w32tm /query /source
You can also display a list of NTP time servers along with their configuration status as shown.
w32tm /query /peers
To display NTP server configuration settings, run the command:
w32tm /query /source
This shows quite a wealth of information.
Final Take
We cannot stress enough how important it is to maintain accurate time and date settings on your server. As you have seen, setting up an NTP server on your Windows server instance is quite easy and straight forward.
Once you have configured the NTP service on your server, other domain controllers in your environment will sync with this server and the Windows clients in the domain will sync with the domain controllers. Hopefully, you can now install and configure NTP on Windows Server 2019.
Home » OS’s » Windows » Set NTP Server Windows 2016 or Windows 2019
There is no question about it, having accurate time in your environment set in critical infrastructure systems is a must. Many business-critical applications and infrastructure systems rely on accurate time synchronized between them to ensure the system functions as expected. Time skew can cause all kinds of weirdness when it is misconfigured or out of sync between different servers/systems. This is especially true in a Windows Server Active Directory domain. Having accurate time between a client computer and domain controllers is essential. Let’s take a look at how to set ntp server Windows 2016 or Windows 2019 to see how this can be easily carried out.
What is NTP?
Wen it comes to synchronizing time in most enviornments, Network Time Protocol (NTP) is the protocol that is used to ensure accurate time across your environent. In most environments, NTP servers, special time servers, are configured that provide an external time source for which your internal servers can synchronize with.
There are several widely known NTP IP addresses on the Internet that provide reliable time sources for your network. The NTP.org servers are one such set of time servers that provide an NTP source for configuration.
There are a few NTP values to be aware of:
- NTP Server – This is a specialized server that is able to detremine the precise time from an external timing reference such as GPS and passes these precise time values on to your network
- Offset – This is the difference in time between the external time server and the time on a local client computer. The larger the offset, the more inaccurate the timing source is.
- Delay – This is the value of the round-trip time (latency) of the timing message between the client to the server and back again.
How Time is synchronized in a Windows Server domain
In a Windows domain, Microsoft has default configuration in place that takes care of a good portion of the NTP configuration. Starting with Windows 2000 Server, Windows clients are configured as NTP Clients. When configured as an NTP client, Windows computers only attempt to contact the domain controller for NTP synchronization or a manually specified NTP server.
Microsoft has made the domain controller the default in a Windows domain since it makes sense that clients already have a secure channel established with DCs for other types of communications. Additionally, accurate and synchronized time between domain controllers and clients is especially important for all kinds of things such as logins, group policy synchronization and other tasks/operations.
The order of operations or hierarchy in a Windows domain is as follows:
- Domain members attempt to synchronize time with any domain controller located in the domain
- Domain controllers synchronize with a more authoritative domain controller
- The first domain controller that is installed in the environment is automatically configured to be a reliable time source.
- Other than the first domain controller installed, the PDC emulator (if role has been moved from the first DC installed) generally holds the position of best time source.
An important point to consider and that comes into play when thinking about why we set ntp server in Windows 2016 or Windows 2019 is the authoritative domain controller must have a reliable source to synchronize with as well. This is generally an external time server outside of the domain hierarchy.
Now that we know how the domain hierarchy for time is configured, how is the external time source configured on your domain controller that is configured as the reliable source of time?
Configuring Windows Time Service with W32tm.exe
When it comes to Windows Server environments like Windows Server 2016 or Windows Server 2019, there is a special Windows service that controls the time synchronization of your Windows hosts. This is the Windows Time Service.
Microsoft provides a command line tool to interact with the Windows Time Service called W32tm.exe. This has been included in Windows operating systems since Windows XP/Windows 2003 and later. It can be used to configure Windows Time service parameters as well as diagnose time service problems. This is generally the tool of choice when it comes to configuring, monitoring, and administering Windows Time.
Using the W32tm.exe utility is fairly straightforward. It can be used from a normal command prompt as well as from a PowerShell prompt. There are several command parameters included that allow not only configuring the NTP servers you want to query, but also parameters that allow viewing the low level registry configuration as well as the synchronization status.
You can read the official Microsoft KB on the Windows Time service and the W32tm.exe utility here:
- https://docs.microsoft.com/en-us/windows-server/networking/windows-time-service/windows-time-service-tools-and-settings
However, there are a few commands I would like to show you for the purposes of configuring your Domain controller that is to be the reliable time source (PDC Emulator) for your domain.
The first command is the command line entry to specify your NTP servers, which in this case I am using the NTP.org servers to set as the source of my NTP synchronization.
w32tm /config /syncfromflags:manual /manualpeerlist:"0.us.pool.ntp.org 1.us.pool.ntp.org 2.us.pool.ntp.org 3.us.pool.ntp.org" /update Stop-Service w32time Start-Service w32time
If you want to view the status of the NTP synchronization on your server after you have configured the values and restarted the w32time service, you can use the following command:
w32tm /query /status
You can also check the values configured in your registry key hkey local machine system currentcontrolset services w32time config using the commands below. You can drill into the configuration parameters using the /dumpreg /subkey command.
w32tm /dumpreg w32tm /dumpreg /subkey:parameters
Final Thoughts
As shown, you can easily set NTP Server Windows 2016 or Windows 2019 using the w32tm command utility that allows interacting with the time service in Windows Server.
In a Windows domain, you want to configure your authoritative time source domain controller, which by default is the PDC Emulator, to pull time information from an authoritative source like NTP.org or some other reliable NTP time server.
After configuring the time source, the other domain controllers will synchronize with this server and then the Windows clients joined to the domain will synchronize with the domain controllers that have the corrected time from the authoritative server.
Brandon Lee is the Senior Writer, Engineer and owner at Virtualizationhowto.com, and a 7-time VMware vExpert, with over two decades of experience in Information Technology. Having worked for numerous Fortune 500 companies as well as in various industries, He has extensive experience in various IT segments and is a strong advocate for open source technologies. Brandon holds many industry certifications, loves the outdoors and spending time with family. Also, he goes through the effort of testing and troubleshooting issues, so you don’t have to.
Windows Server 2019 provides an option to configure an NTP (Network Time Protocol) server on a domain controller. NTP is a protocol used to synchronize the time on network devices and ensure accurate timekeeping. By configuring your domain controller as an NTP server, you can ensure that all devices within your network have synchronized time. This tutorial will guide you through the steps of configuring an NTP server on a Windows 2019 domain controller.
Step 1: Open the Command Prompt as an Administrator.
To begin, open the Command Prompt with administrator rights. You can do this by right-clicking on the Start button and selecting «Command Prompt (Admin)» from the context menu.
Step 2: Check the current time settings.
Before configuring the NTP server, it’s important to check the current time settings on your domain controller. To do this, type the following command in the Command Prompt and press Enter:
«`
w32tm /query /status
«`
This command will display the current time settings, including the time source.
Step 3: Configure the NTP server.
Next, you need to configure your domain controller as an NTP server. In the Command Prompt, enter the following command, replacing `time.windows.com` with the NTP server of your choice:
«`
w32tm /config /syncfromflags:manual /manualpeerlist:«time.windows.com«
«`
This command tells the domain controller to synchronize time from the specified NTP server.
Step 4: Restart the time service.
To apply the changes made in the previous step, you need to restart the time service. Enter the following command in the Command Prompt and press Enter:
«`
net stop w32time && net start w32time
«`
This command stops and starts the time service, ensuring that the changes take effect.
Step 5: Verify the NTP server configuration.
Finally, you can verify that the NTP server configuration was successful. Run the following command in the Command Prompt:
«`
w32tm /query /status
«`
Check the output to ensure that the «Source» field displays the NTP server you configured.
Pros | Cons |
---|---|
1. Provides accurate time synchronization for all devices within your network. | 1. Requires administrative privileges to configure the NTP server. |
2. Improves network security by ensuring consistent time timestamps. | 2. Relies on the availability and reliability of the chosen NTP server. |
3. Helps prevent issues with authentication, auditing, and file replication across network devices. | 3. Incorrectly configuring the NTP server may cause time synchronization problems. |
By following these steps, you can easily configure an NTP server on a Windows 2019 domain controller. Having synchronized time across your network devices is crucial for various operations, including authentication, auditing, and file replication. Take advantage of this feature to ensure accurate timekeeping in your IT infrastructure.
Video Tutorial:Does Active Directory use NTP?
How to set NTP time on domain controller?
Setting NTP (Network Time Protocol) time on a domain controller is an essential task to ensure accurate time synchronization across the network. Follow these steps to set NTP time on a domain controller:
1. Log in to the domain controller with administrative privileges.
2. Open the Command Prompt with administrative rights. Right-click on the Command Prompt icon and choose «Run as administrator.«
3. Type the following command to set the NTP server:
`w32tm /config /syncfromflags:manual /manualpeerlist:«pool.ntp.org«`
This command specifies that the time synchronization will be manually configured using the NTP server pool.ntp.org. You can replace pool.ntp.org with any other reliable NTP server address.
4. Press Enter to execute the command.
5. Next, type the following command to update the configuration:
`w32tm /config /reliable:yes`
This command ensures that the time service will start automatically and remain reliable.
6. Press Enter to execute the command.
7. Now, restart the Windows Time service to apply the changes. Use the following command:
`net stop w32time && net start w32time`
This command stops and starts the Windows Time service.
8. Finally, check if the time synchronization is working correctly. Open the Command Prompt and enter:
`w32tm /query /status`
This command displays the detailed status of the Windows Time service.
Look for the «Source:» field, which should show the NTP server address you configured previously.
That’s it! You have successfully set NTP time on the domain controller. Ensure that the NTP server you choose is reliable and widely used for accurate time synchronization.
How do I know if my domain controller is NTP?
To determine if your domain controller is configured as a Network Time Protocol (NTP) server, you can follow these steps:
1. Open the command prompt on your domain controller. You can do this by pressing Windows Key + R, typing «cmd,» and pressing Enter.
2. In the command prompt, type the following command and press Enter:
«`
w32tm /query /configuration
«`
This command will display the configuration settings of the Windows Time service.
3. Look for the line that starts with «NtpServer.» If it includes the domain controller’s IP address or a valid NTP time server address, it means your domain controller is configured to synchronize time using NTP.
4. Check the «Type» field in the output. If it shows «NT5DS» or «NTP«, it indicates that the domain controller is using NTP as the time source.
5. Additionally, you can use the following command to check the NTP peers that your domain controller is synchronized with:
«`
w32tm /query /peers
«`
This command will display a list of NTP peers along with their status. If you see valid NTP server addresses in the output, it confirms that your domain controller is configured to synchronize time using NTP.
Remember, NTP synchronization is crucial for maintaining accurate time across your network and domain controllers. Ensuring proper time synchronization helps with security, authentication, and overall system integrity.
Configuring Network Time Protocol (NTP) in Windows Server 2019 is important for ensuring accurate time synchronization across domain-joined computers. Here are the steps to configure NTP in Windows Server 2019:
1. Open the command prompt with administrative privileges by right-clicking on the Start button and selecting «Command Prompt (Admin)«.
2. Start by checking the current time synchronization settings by running the command: `w32tm /query /status`
3. Identify the existing time source(s) listed under «Source» and note them down. If there are no time sources listed, it means the server is not configured for time synchronization.
4. Configure the NTP server by specifying the reliable time source(s) you want to use. For example, if you want to use «pool.ntp.org» as the time source, run the command: `w32tm /config /syncfromflags:manual /manualpeerlist:«pool.ntp.org» /reliable:yes`
5. Restart the Windows Time Service by running the command: `net stop w32time && net start w32time`
6. Finally, synchronize the time immediately by running the command: `w32tm /resync`
7. To verify the new configuration, run the command: `w32tm /query /status` again and check if the «Source» reflects the newly configured time source(s).
By following these steps, you can successfully configure NTP in Windows Server 2019 and ensure accurate time synchronization within your network.
How do I know if my domain controller is NTP server?
Determining if a domain controller is functioning as an NTP server involves checking various settings and configurations. Here’s a step-by-step guide to help you identify if your domain controller is serving as an NTP server:
1. Log in to your domain controller using administrative credentials.
2. Open the Command Prompt or PowerShell as an administrator.
3. Use the following command to check the NTP settings on your domain controller:
«`
w32tm /query /configuration
«`
This command will display the current configuration of the Windows Time service, including the NTP server settings.
4. Look for the «NtpServer» parameter in the command output. If the NtpServer parameter is present and configured, it means your domain controller is acting as an NTP server. The NtpServer value will indicate the NTP server address.
5. Optionally, you can use the following command to verify the time synchronization status between your domain controller and the configured NTP server:
«`
w32tm /stripchart /computer: /samples:
«`
Replace « with the NTP server address obtained in the previous step, and « with the desired number of time samples to be obtained.
By following these steps, you can determine if your domain controller is functioning as an NTP server and verify the time synchronization status.
Can you use domain controller as NTP server?
Yes, you can use a domain controller as an NTP (Network Time Protocol) server. The NTP is used to synchronize clocks on a network to a reference time source, ensuring that devices maintain accurate time and coordinate activities effectively.
Here are the steps to set up a domain controller as an NTP server:
1. Verify the domain controller’s time synchronization source: Before configuring the domain controller as an NTP server, it’s important to ensure that it is already synchronizing time with a reliable external time source. This could be an external NTP server or an authoritative time server on the internet.
2. Configure the domain controller as an NTP server: Once the domain controller has a reliable time source, you can configure it to serve as an NTP server for other devices on the network. This can be done through the Group Policy Management Editor by creating a new Group Policy Object (GPO) or by modifying an existing one.
a. Open the Group Policy Management Editor.
b. Navigate to the desired GPO or create a new one.
c. Go to Computer Configuration > Policies > Administrative Templates > System > Windows Time Service > Time Providers.
d. Enable the «Enable Windows NTP Server» policy and specify the desired NTP server as either a DNS name or an IP address.
e. Apply the GPO to the targeted domain controllers or organizational units.
3. Configure NTP client devices to use the domain controller: Once the domain controller is set up as an NTP server, you need to configure the client devices on the network to use it for time synchronization. This can be done through Group Policy or manually on individual devices.
a. Use Group Policy: Follow a similar process as in Step 2 to configure the «NTP Client» policy under the same GPO, specifying the domain controller’s DNS name or IP address as the NTP server. Apply the GPO to the desired client devices or organizational units.
b. Manual configuration: On individual devices, modify the NTP client settings through the operating system’s control panel or settings menu. Set the domain controller’s DNS name or IP address as the preferred NTP server.
By following these steps, you can effectively use a domain controller as an NTP server, ensuring accurate time synchronization across your network.
Network Time Protocol (NTP) is a highly scalable internet protocol that determines the best time information and synchronizes accurate settings on a computer system. This guide explains how to set the time zone and configure NTP on a Windows Server.
This guide uses Windows Server 2019, but these instructions work on any machine with Server 2016 or later.
Prerequisites
Before you begin:
- Deploy a Vultr Windows Server.
- Connect to the server.
Set the Timezone
- Using the Windows Start Menu, open Server Manager.
- Locate Time zone in the local server properties section.
- Click the current timezone, which is UTC Coordinated Universal Timeby default.
- In the Date and Time window, click Change time zone.
- Expand the Time zone drop-down list.
- Select your preferred timezone. It’s recommended to set it to your server location.
- Click OK to save changes.
- Click Apply to load changes on the server.
- Re-open Server Manager, and verify the timezone change.
Optional: Set the Timezone using PowerShell
-
From the start menu, open Windows PowerShell, or open the run dialog (Win key + R), type
powershell
in the search bar, and click OK to start PowerShell. -
Run the following command to check the server timezone.
PS > Get-Timezone
-
View all available timezones.
PS> Get-Timezone -ListAvailable
To find your target timezone, use the following command to filter by name.
PS> Get-Timezone -ListAvailable | Where-Object {$_.displayname -like "*US*"}
> The command above displays all names containing the characters
US
. You can use a different string such as London. -
Change your timezone.
PS> Set-Timezone -Name "Central Standard Time"
You can also change the timezone by ID.
PS> Set-Timezone -Id "Central Standard Time"
Configure NTP
In addition to setting the timezone, you can also configure Windows to use NTP to synchronize the time.
-
Open the Run dialog window by pressing the Windows key (WIN) + R on your keyboard.
-
In the search bar, enter
regedit
and click OK to open Registry Editor. -
Expand the registry navigation tree:
HKEY_LOCAL_MACHINE -> SYSTEM -> CurrentControlSet -> Services
-
Expand W32Time.
-
Click Config.
-
Select AnnounceFlags
-
Enter
5
in the Value data field. -
Click OK to save changes.
-
In the left pane, click Parameters.
Optional: Change the NTP Server
By default, Vultr uses the time.constant.com
time server, located on our high-speed infrastructure. If you want to use a different time server, you can change the value of the NtpServer
parameter by following these steps.
-
Double-click NtpServer
-
Change the value data field to your preferred value. For example, to sync with the United States NTP pool, use:
us.pool.ntp.org
You can find a list of NTP Pool servers at the official website.
-
Expand TimeProviders.
-
Click NtpServer.
-
Double click Enabled, change the value data from
0
to1
, and click OK to save changes. -
Close the registry editor, open the start menu, and search the keyword
services
. -
In the services window, scroll through the list, select Windows Time, right-click, and select Restart to apply NTP changes.
Optional: Configure NTP Using PowerShell
If you prefer to use Powershell, you can use the following commands to configure NTP.
-
Open PowerShell with administrative privileges.
-
Check the NTP time synchronization status.
PS> w32tm /query /status
-
Enter the following command to set the time AnnounceFlags to
5
.PS> Set-ItemProperty -Path "HKLM:\SYSTEM\CurrentControlSet\services\W32Time\Config" -Name "AnnounceFlags" -Value 5
-
(Optional) If you want to use NTP pool servers instead of Vultr’s NTP server, run the following command.
PS> Set-ItemProperty -Path "HKLM:\SYSTEM\CurrentControlSet\Services\w32time\Parameters" -Name "NtpServer" -Value us.pool.ntp.org
-
Enable NTP Server.
PS> Set-ItemProperty -Path "HKLM:\SYSTEM\CurrentControlSet\Services\w32time\TimeProviders\NtpServer" -Name "Enabled" -Value 1
-
Restart the Windows Time service.
PS> Restart-Service w32Time
-
Test NTP synchronization.
PS> w32tm /resync
Next Steps
You have successfully set the timezone and configured NTP on Windows Server 2019. If you plan to have other machines on a Vultr VPC use your NTP server, allow port 123
in the Windows Server Firewall. For further information, refer to the following guides.
- Official NTP Documentation
- List of database TimeZones
- Configure the Firewall on Windows Server 2019
- Create A Vultr Virtual Private Cloud (VPC)
In this article, you will learn-
- 1 Introduction
- 2 Stage 1: Open up Registry Editor
- 3 Stage 2: Go to the NtpServer Path
- 4 Stage 3: Enable NtpServer
- 5 Stage 4: Make the AnnounceFlags 5
- 6 • Step 5: Restart NtpServer
- 7
- 8 Configure NTP Server on Windows 2019 using PowerShell
- 9 For More Latest Articles Click on Below Link
- 10 https://www.worldofitech.com/category/microsoft-windows-server-2019/
Introduction
We should perceive how you can arrange NTP Server on Windows Server 2019. The Windows Time administration utilizes the Network Time Protocol (NTP) to help synchronize time over a system. NTP is an Internet time convention that incorporates the order calculations essential for synchronizing tickers
Stage 1: Open up Registry Editor
Snap-on the beginning symbol in your Server and quest for “Run” application. From the “Run” application, type in “Regedit” and hit “Enter”. This will start up our Registry Editor as shown below.
A Window similar to the one below will ensue
Stage 2: Go to the NtpServer Path
Follow the accompanying Registry tree to show up where our objective design lies. Computer>HKEY_LOCAL_MACHINE>SYSTEM>CurrentControlSet>Services>W32Time>TimeProviders>NtpServer.
The picture beneath shows us toward the finish of the tree. As should be obvious, the correct sheet has records which are what as are searching for.
Stage 3: Enable NtpServer
Double-click on the “Enabled” file which will open a little window. On the window, there is a section called “Worth information”. Change the incentive from 0 to 1 as shown below. Snap “ok” in the wake of evolving.
Stage 4: Make the AnnounceFlags 5
Inside this way: Computer>HKEY_LOCAL_MACHINE>SYSTEM>CurrentControlSet>Services>W32Time>, go into “Config”, that is: Computer>HKEY_LOCAL_MACHINE>SYSTEM>CurrentControlSet>Services>W32Time>Config.
While there, you will see a document named “AnnounceFlags” on the correct sheet as appeared above. As you can figure, double-tap on it. That will open a little window like the one in Step 3. Under “Value data”, change the value from a to 5.
From Microsoft, coming up next is the portrayal of all accessible AnnounceFlags:
Section controls whether this computer is set apart as a solid time server.
A computer isn’t set apart as dependable except if it is additionally set apart as a period server.
- 0x00 Not a time server
- 0x01 Always time server
- 0x02 Automatic time server
- 0x04 Always reliable time server
- 0x08 Automatic reliable time server
The default an incentive for space individuals is 10. The default an incentive for remain solitary customers and servers is 10.
• Step 5: Restart NtpServer
• Open up “Services” by hitting on the Windows key and scanning for Services. When open, search for “Windows Time”. Right-click on it and snap on “Restart”
Configure NTP Server on Windows 2019 using PowerShell
If you are a PowerShell person, then open up your Powershell as administrator and run the commands below and you will be good go.
Enable NtpServer
Set-ItemProperty -Path “HKLM:\SYSTEM\CurrentControlSet\Services\w32time\TimeProviders\NtpServer” -Name “Enabled” -Value 1
Make the AnnounceFlags 5
Set-ItemProperty -Path “HKLM:\SYSTEM\CurrentControlSet\services\W32Time\Config” -Name “AnnounceFlags” -Value 5
Restart NtpServer
Restart-Service w32Time