Mkvtoolnix for windows 7

AlmaLinux 9.x

I provide binaries for AlmaLinux 9.x. You can get RPMs for MKVToolNix from my repository. First you have to add that repository with the following command:

sudo rpm -Uhv https://mkvtoolnix.download/almalinux/bunkus-org-repo-2-4.noarch.rpm

Then you can install MKVToolNix with the following command:

sudo dnf install mkvtoolnix mkvtoolnix-gui

You can also browse the download directories where you can find packages for older versions of AlmaLinux: almalinux/.

Linux AppImage

I’m providing a distribution-agnostic AppImage for Linux. It should run on Linux distributions that come with glibc 2.28 or later.

You can download the current AppImage from here. Older releases and continuous builds can be
found here.

Don’t forget to make the downloaded file executable afterwards.

Starting the AppImage will launch MKVToolNix GUI. If you want to run one of the command-line tools, you can do so as well: by symlinking the AppImage to
the tool’s name. Here’s an example using mkvpropedit to change a movie’s title:

chmod u+rx MKVToolNix_GUI-78.0-x86_64.AppImage
ln -s MKVToolNix_GUI-78.0-x86_64.AppImage mkvpropedit
./mkvpropedit my-movie.mkv —set title=»Best movie ever»

If you need an AppImage that runs on even older version, get the AppImage for v77. Until that
version the AppImages were built on an older distribution with an older glibc (CentOS 7 with glibc 2.17).

Arch Linux

Giovanni Scafora is maintaining packages for
libEBML, libMatroska and MKVToolNix in
Arch’s [extra] repository. You can
install MKVToolNix with the simple command pacman -S
mkvtoolnix-cli mkvtoolnix-gui

You can also view the package sites for
libebml,
libmatroska and
MKVToolNix.

CentOS Stream/RedHat Enterprise Linux 9.x

I provide binaries for CentOS 9 Stream that might work on RedHat Enterprise Linux, too. You can get RPMs for MKVToolNix from my yum repository. First
you can add that yum repository with the following command:

sudo rpm -Uhv https://mkvtoolnix.download/centosstream/bunkus-org-repo-2-4.noarch.rpm

Then you can install MKVToolNix with the following command:

sudo dnf install mkvtoolnix mkvtoolnix-gui

You can also browse the download directories for packages for older versions of CentOS: centosstream/.

Debian packages

I provide i386/amd64/arm64/armhf binaries for MKVToolNix for Debian 12 «Bookworm» (the current stable). The arm64 and armhf binaries can be
used on Raspberry Pi OS (formerly Raspbian).

You first have to import my public GPG key because all of my pools are signed. Run this once:
sudo wget -O /etc/apt/keyrings/gpg-pub-moritzbunkus.gpg https://mkvtoolnix.download/gpg-pub-moritzbunkus.gpg

You can access the packages by adding the lines below to a file such as /etc/apt/sources.list.d/mkvtoolnix.download.list:

Now simply run sudo apt update followed by sudo apt install mkvtoolnix mkvtoolnix-gui.

A note on compiling for Debian 11: you have to install the clang package for the clang compiler which is used due to a
bug in the gcc version shipped with Debian 11.

Older Debian versions: the repositories for older releases still exist but aren’t updated anymore:

If you’re looking for older Debian or MKVToolNix releases, you can look through the repository directory yourself.

Docker

Jocelyn Le Sage is maintaining a Docker image for MKVToolNix GUI that can also be run on
machines such as Synology or Unraid NAS systems. Please see the full documentation Jocelyn
provides for details how to run the image and how to solve issues such as problems with file permission due to differing user IDs inside and outside the
container.

If you’re having issues with the Docker image, please file a bug report in Jocelyn’s GitHub repository. I
do not offer support for this Docker image myself.

Fedora 40–41

I host x86_64 packages for Fedora 40 & 41 of MKVToolNix in dnf repositories.

In order to add the repository all you have to do is to execute the following two commands:

sudo rpm -Uhv https://mkvtoolnix.download/fedora/bunkus-org-repo-2-4.noarch.rpm

Afterwards you can install MKVToolNix with the following command:

sudo dnf install mkvtoolnix mkvtoolnix-gui

My GPG key’s ID is 16D2F5DC 10C052A6, and the fingerprint is EB24 BCA1 4BA6 A24F 1427 6FEE 16D2 F5DC 10C0 52A6.

You can also browse the download directories for your version: Fedora 39, Fedora 40 & Fedora 41.

Fedora 13–39: I don’t provide updated binary packages for current MKVToolNix versions for these distributions anymore. However, older
binary packages can still be found in the download directories.

Linux Flatpak images

Flatpak images are available over on FlatHub.org.

After installing Flatpak itself, you can download and run the current version with the following commands:

flatpak install flathub org.bunkus.mkvtoolnix-gui
flatpak run org.bunkus.mkvtoolnix-gui

If you want to run one of the command-line tools, you can do so as well. In general the syntax looks like this:

flatpak run org.bunkus.mkvtoolnix-gui <executable> <command line arguments>

The «executable» can be either the full name such as «mkvmerge» or their shortened form without the «mkv» prefix, e.g. «merge».

Running the command-line applications also works on headless servers without a graphical user interface even though the Flatpak’s name includes «gui» in its name.

Here’s an example using mkvpropedit to change a movie’s title:

flatpak run org.bunkus.mkvtoolnix-gui propedit my-movie.mkv --set title="This is super cool movie"

An alternative for versions prior to v65 is to specify the command to execute with flatpak’s --command=<executable> argument. Here’s the example from above with this syntax:

flatpak run --command=mkvpropedit org.bunkus.mkvtoolnix-gui my-movie.mkv --set title="This is super cool movie"

Arch Linux

Giovanni Scafora is maintaining packages for
libEBML, libMatroska and MKVToolNix in
Arch’s [extra] repository. You can
install MKVToolNix with the simple command pacman -S
mkvtoolnix-cli mkvtoolnix-gui

You can also view the package sites for
libebml,
libmatroska and
MKVToolNix.

FreeBSD

You can find MKVToolNix and its GUI as a port on

freshports.org.

Gentoo

Thanks to Martin Holzer Gentoo does already contain ebuilds for
MKVToolNix which you can simply install.

Linux Mint 21 «Vanessa», 22 «Wilma»

You first have to import my public GPG key because all of my pools are signed. Run this
once: sudo wget -O /etc/apt/keyrings/gpg-pub-moritzbunkus.gpg https://mkvtoolnix.download/gpg-pub-moritzbunkus.gpg

You can access the packages by adding the appropriate lines below to a file such as /etc/apt/sources.list.d/mkvtoolnix.download.list:

Now simply run sudo apt update followed by sudo apt install mkvtoolnix mkvtoolnix-gui.

macOS 13 «Ventura» and newer

Note: I don’t own a Mac. While I do provide binaries I do not offer support for macOS. I don’t use that platform, have no programming experience
with it whatsoever, and I have neither the time nor the motivation to hunt down issues on it.

At the moment you have two options apart from building the applications yourself:

1. Unsupported binaries by myself, a disk image of 92.0. Download it here.
2. The HomeBrew project offers a cask that downloads & installs the disk image I provide. It’s the exact same software and
   therefore unsupported as well. Using HomeBrew allows for easier updating, though.

Required macOS versions

Newer versions of MKVToolNix require newer versions of macOS to run due to Apple supporting certain required libraries only with certain macOS versions. Here’s a table listing the first MKVToolNix version that required a specific version of macOS:

MKVToolNix version	minimum required macOS version
90.0	13 «Ventura»
54.0.0	10.15 «Catalina»
42.0.0	10.14 «Mojave»
9.8.0	10.09 «Mavericks»

You can download all versions here.

Mageia

Götz Waschk is so kind as to build RPM packages for Mageia (formerly Mandriva). The current version is in
the Cauldron distribution. The repository for
the stable version might only contain an outdated version of MKVToolNix.

NetBSD

You can find MKVToolNix and its GUI in the pkgsrc tree as

multimedia/mkvtoolnix and

multimedia/mmg, maintained by Lubomir Sedlacik.

OpenIndiana

You can find MKVToolNix and its GUI in
official
«extra» repository. After adding the repository to
your list of publishers you can install MKVToolNix with pkg
install mkvtoolnix.

openSUSE Tumbleweed & Leap

Up to date packages of MKVToolNix for Tumbleweed & Leap are availalble on the Open Build Service. Usually
it only takes a couple of hours from the release of a new version until packages have been built there.

Raspberry Pi OS (formerly Raspbian) packages

You can use the Debian binaries on Raspberry Pi OS. They’re available for the armhf platform the Raspberry Pi uses as well.

Please note that I used to host a Raspbian-specific repository here. This repository was removed with release 68.0.0 in favor of the Debian repository.

Slackware

A way to get MKVToolNix running on the latest
Slackware is to download the build script available
on Slackbuilds.org and
running it. It will do everything for you. This script was provided
by Andrew Strong.

24.10 «Oracular Oriole», 24.04 «Noble Numbat», 25.04 «Plucky Puffin»

I offer packages for the following architectures: amd64 (all releases), armhf & arm64.

You first have to import my public GPG key because all of my pools are signed. Run this
once: sudo wget -O /etc/apt/keyrings/gpg-pub-moritzbunkus.gpg https://mkvtoolnix.download/gpg-pub-moritzbunkus.gpg

You can access the packages by adding the appropriate lines below to a file such as /etc/apt/sources.list.d/mkvtoolnix.download.list:

Now simply run sudo apt update followed by sudo apt install mkvtoolnix mkvtoolnix-gui.

Ubuntu 22.04 «Jammy Jellyfish», Ubuntu 20.04 «Focal Fossa» & 18.04 LTS «Bionic Beaver»: you can still get versions up to v88.0 (for 22.04), v81.0 (for 20.04) & v53.0.0 (for 18.04) from my repositories.

If you’re looking for older Ubuntu or MKVToolNix releases, you can look through the repository directory yourself.

Windows

Download

The current version v92.0 is available as an installer and as a portable 7zip archive. Supported Windows versions are Windows 10/Windows Server 2016 and newer.

Checksum verification

If you want to verify the integrity of the downloads please use the checksums that I provide for the binaries in the table above. Alternatively you can
download the files containing the checksums for all Windows binaries here: SHA-256
& SHA-512.

Microsoft Store

MKVToolNix is available on the Microsoft Store for a small fee. This is a way for you to
support the development financially while getting automatic updates in return. Please note that due to Microsoft’s Store policies you cannot run the
command-line tools of the Store edition of MKVToolNix yourself; you can only run the GUI. Otherwise the Store edition & the non-Store ones are
functionally identical. If you have more questions, please see
this FAQ entry.

Chocolatey

If you’re using the Chocolatey package manager, you can also install or upgrade MKVToolNix with Chocolatey by
running choco install mkvtoolnix respectively choco upgrade mkvtoolnix from the PowerShell. They’re usually pretty quick to
update.

Older versions

All Windows builds for older versions are available on my site.

Zenwalk Linux

Frédéric Boulet is maintaining packages for
libEBML, libMatroska and MKVToolNix in
Zenwalk’s [extra]
repository. You can install MKVToolNix with the simple
command netpkg mkvtoolnix or with the graphical
utility xnetpkg.

Others

Unfortunately I do not have access to other distributions and cannot
provide binaries for other distributions. If you’re interested in providing
binary packages for other distributions then please contact me. You’ll find
my email address on the contact page.

# Version 92.0 «Everglow» 2025-04-26

## New features and enhancements

* mkvmerge: FLAC reader: pictures embedded into the FLAC file were already handled as attachments, but they were left in the codec initialization data as well. They’re now removed from the codec initialization data. See #6079.
* mkvmerge: FLAC reader: padding metadata blocks will now be removed from the codec initialization data. See #6079.
* mkvmerge: FLAC reader: embedded Vorbis comments will now be converted into Matroska comments or track/global header fields when available (e.g. `TITLE` will become the segment title & track’s name, `LANGUAGE` will become the track’s language). Copying of Vorbis comments that are converted into actual Matroska tags can be prevented with the usual options, e.g. `—no-track-tags`. The comments will also be removed from the codec initialization data. Implements #6079.
* mkvmerge, MKVToolNix GUI’s chapter editor: when reading simple (OGM-style) chapter files & no character set is given for the file, mkvmerge will try UTF-8 first before falling back to the system’s default encoding. Implements #6084.
* MKVToolNix GUI: multiplexer: the special drag & drop zones added in v91 are now shown by default in new installations.
* MKVToolNix GUI: in new installations the main window will now be sized at 75% of the screen’s resolution initially with a certain minimum initial size. This improves initial readability on high DPI screens that use screen scaling factors such as 150%.

## Bug fixes

* mkvmerge: Ogg reader: during identification the track tags are now reported properly.
* MKVToolNix GUI: multiplexer: within the «additional options», both track-specific ones & the global ones on the «Output» tab, it wasn’t possible to specify empty (zero-length) arguments. With the intended syntax of two consecutive single or double quotation marks the empty arguments were simply skipped. This was fixed, and it is now possible to specify e.g. `—title «»` in the global «Additional options» in order to force no title to be written ever. Fixes #6087.

## Build system changes

* Windows build: the `packaging/windows/populate_installer_dir.sh` now expects the user to pass the Saxon-HE’s JAR file name to be passed with the `-s` or `—saxon-jar` parameter instead of the base directory for Saxon-HE. This allows newer versions of Saxon-HE to be used.

Explanation:
NEW SOFTWARE= New tool since your last visit
NEW VERSION= New version since your last visit
NEW REVIEW= New review since your last visit
NEW VERSION= New version

Latest version
Version number / Beta version number / Update version number and when it whas released.

Type and download
NO MORE UPDATES? = The software hasn’t been updated in over 2 years.
NO LONGER DEVELOPED = The software hasn’t been updated in over 5 years.
RECENTLY UPDATED = The software has been updated the last 31 days.
Freeware = Download Free software.
Freeware Trialware = Download Free software but some parts are trial/shareware.
Free software = Download Free software and also open source code also known as FOSS (Free and Open Source Software).
Free software Trialware = Download Free software and also open source code but some parts are trial/shareware.
Freeware Ads = Download Free software but supported by advertising, usually with a included browser toolbar. It may be disabled when installing or after installation.
Free software Ads = Free Download software and open source code but supported by advertising, usually with a included browser toolbar. It may be disabled when installing or after installation.
Trialware = Also called shareware or demo. Free Trial version available for download and testing with usually a time limit or limited functions.
Payware = No demo or trial available.

Portable version = A portable/standalone version is available. No installation is required.
v1.0.1 = Latest version available.
Download beta = It could be a Beta, RC(Release Candidate) or an Alpha / Nightly / Unstable version of the software.
Download 15MB = A direct link to the software download.
Win = Windows download version. It works on 32-bit and 64-bit Windows.
Win64 = Windows 64-bit download version. It works only on 64-bit Windows.
Mac = Mac download version. It works on 32-bit and 64-bit Mac OS.
Mac64 = Mac OS download version. It works only on 64-bit Mac OS.
Linux = Linux download version.
Portable = Portable version. No installation is required.
Ad-Supported = The software is bundled with advertising. Be careful when you install the software and disable addons that you don’t want!
Visit developers site = A link to the software developer site.
Download (mirror link) = A mirror link to the software download. It may not contain the latest versions.
Download old versions = Free downloads of previous versions of the program.

Download 64-bit version = If you have a 64bit operating system you can download this version.
Download portable version = Portable/Standalone version meaning that no installation is required, just extract the files to a folder and run directly.
Portable version available = Download the portable version and you can just extract the files and run the program without installation.
Old versions available = Download old versions of the program.
Version history available = Complete changelog on our site.
= Windows version available.
= Mac OS version available.
= Linux version available.
Our hosted software are virus and malware scanned with several antivirus programs using www.virustotal.com. (NOTE! Just one virustotal warning is 99.9% a false positive. And some software might receive 2-6 warnings but it’s if they are not all same virus/trojan then it’s 99% false positives.)

Rating
Rating from 0-10.

MKVToolnix для Windows 7 — мощный инструмент работы с видеодокументами формата MKV. Программа оснащена широким арсеналом для редактирования видеоряда: поворот кадров, извлечение и добавление звуковых дорожек или субтитров, объединение фрагментов или разбивание цельного видео на отдельные отрезки, конвертирование других форматов в MKV-разрешение.

Приложение имеет приветливый интерфейс и организованное расположение всех важных инструментов, что значительно упрощает ознакомление и работу с утилитой. Рекомендуем скачать MKVToolnix для Windows 7 на русском языке без регистрации и смс с официального сайта.

Информация о программеСКАЧАТЬ БЕСПЛАТНО

• Лицензия: Бесплатная
• Разработчик: Moritz Bunkus
• Языки: русский, украинский, английский
• Устройства: пк, нетбук или ноутбук (Acer, ASUS, DELL, Lenovo, Samsung, Toshiba, HP, MSI)
• ОС: Windows 7 Максимальная, Домашняя Базовая, Начальная, Профессиональная, Корпоративная, Home Basic, Ultimate
• Разрядность: 32 bit, 64 bit, x86
• Версия: последняя 2025, без вирусов

Картинка с сайта: win7programmy.com

Аналоги MKVToolnix

1. Avast
2. Fake Webcam
3. Acronis Disk Director Suite
4. HDD Master
5. BitMeter
6. Movavi Video Converter

Отзывы пользователей

Категории программ

• Программы для Windows 7
• Видео конвертеры
• Видеоплееры
• Удаление программ
• Торрент клиенты
• Создание видео
• Просмотр ТВ
• Прослушивание музыки
• Чтение книг
• Создание музыки
• Удаленный доступ
• Чтение FB2

ТОП-сегодня раздела «Конверторы»

Отзывы о программе MKVToolnix