Материнская плата asus windows 7 ready gpu boost

Картинка с сайта: www.manualsdir.com

ASUS M4A89GTD PRO Series

4-9

Chapter 4

4.3.7

ASUS GPU Boost

ASUS GPU Boost allows you to overclock the integrated GPU in WIndows

®

environment and

takes effect in real-time without exiting and rebooting the OS.

Refer to the CPU documentation before adjusting the integrated GPU voltage settings.

Setting a high voltage may damage the integrated GPU permanently, and setting a low

voltage may make the system unstable.

•

ASUS GPU Boost is available only when you install the GPU Boost driver from the

motherboard support DVD.

•

For system stability, all changes made in ASUS GPU Boost will not be saved to BIOS

settings and will not be kept on the next system boot. Use the Save Profile function

to save your customized overclocking settings and manually load the profile after

Windows starts.

•

When GPU Boost is enabled, ASUS EPU will be set to High Performance mode

automatically.

To launch ASUS GPU Boost

1.

Install the ASUS TurboV EVO utility from the motherboard support DVD.

2.

Install the ASUS GPU Boost driver from the motherboard support DVD.

3.

Click start > All Programs > ASUS > TurboV EVO > TurboV EVO.

4.

Click More Settings from the TurboV EVO main screen, and then click GPU Boost.

You can adjust the GPU Engine Clock and GPU Voltage simultaneously in the TurboV

Easy Mode.

Adjustment

sliders

Start-up values

Target values

Applies all changes immediately

Undoes all changes

without applying

Click to restore all start-up settings

На этой странице вы можете бесплатно скачать ASUS Tools GPU Boost Драйвер v.1.01.15

Похожие файлы:

Page
E7242
First Edition (V1) March
Chapter 1:
Product introduction Chapter 2:
Hardware information Chapter 3:
BIOS setup Chapter 4:
Software support 4.4.1System Requirements for Intel® 2012 Desktop responsiveness
Chapter 5: Multiple GPU technology support
A-1 A-2
Electrical safety
Operation safety How this guide is organized
Where to find more information Conventions used in this guide
Typography Chipset
Memory Graphics
Multi-GPUsupport Storage
USB
/2.0 ports at the mid-boardfor front panel support /2.0 ports at the back panel (blue)
-2 x USB 3.0 ports at the back panel (blue) *The USB 3.0 ports only support Windows 7® or later versions. UASP
Rear panel I/O
ports Internal I/O
connectors BIOS features
Page
Thank you for buying an ASUS® P8Z77-VLK motherboard Check your motherboard package for the following items
Chapter
1.3.1Product highlights
Intel® Smart Response Technology
SSD Speed with HDD Capacity Intel® Smart Connect Technology
Intel® Rapid Start Technology PCI Express® 3.0 Ready
1.3.2ASUS DIGI+ VRM Digital Power Design
1.3.3ASUS Exclusive Features MemOK
Any Memory is A-OK Network iControl
Real-TimeNetwork Bandwidth Control GPU Boost
1.3.4ASUS Quiet Thermal Solutions
1.3.5ASUS EZ DIY 1.3.6Other special features
Page
Page
2.2.1Motherboard layout
Layout contents
2.2.2Central Processing Unit (CPU)
2.2.3System memory
Memory configurations
P8Z77-VLK Motherboard Qualified Vendors Lists (QVL) DDR3 2400MHz capability P8Z77-VLK Motherboard Qualified Vendors Lists (QVL) DDR3 2250MHz capability
P8Z77-VLK Motherboard Qualified Vendors Lists (QVL) DDR3 2200MHz capability P8Z77-VLK Motherboard Qualified Vendors Lists (QVL) DDR3 2133MHz capability
P8Z77-VLK Motherboard Qualified Vendors Lists (QVL) DDR3 2000MHz capability P8Z77-VLK Motherboard Qualified Vendors Lists (QVL) DDR3 1866MHz capability
P8Z77-VLK Motherboard Qualified Vendors Lists (QVL) DDR3 1600MHz capability
P8Z77-VLK Motherboard Qualified Vendors Lists (QVL) DDR3 1333MHz
Page
Page
P8Z77-VLK Motherboard Qualified Vendors Lists (QVL) DDR3 1066MHz capability
2.2.4Expansion slots
IRQ assignments for this motherboard
2.2.5Jumper
2.2.6Onboard switches
2.GPU Boost switch
P8Z77-VLK GPU Boost switch 3.EPU switch
P8Z77-VLK EPU Boost switch 2.2.7Onboard LEDs
3.GPU Boost LED
P8Z77-VLK GPU Boost LED 4.EPU LED
P8Z77-VLK EPU LED 2.2.8Internal connectors
3.USB 2.0 connectors (10-1pin USB 3 ~ 10)
P8Z77-VLK USB2.0 connectors 4.Front panel audio connector (10-1pin AAFP)
AAFP P8Z77-VLK Front panel audio connector
5.Digital audio connector (4-1pin SPDIF_OUT)
P8Z77-VLK Digital audio connector 6.CPU, chassis, and power fan connectors (4-pinCPU_FAN, 4-pinCHA_FAN1/2/3)
P8Z77-VLK fan connectors 7.USB 3.0 connector (20-1pin USB3_34)
USB3_34 P8Z77-VLK USB3.0 Front panel connector
8.Intel® Z77 Serial ATA 3.0 Gb/s connectors (7-pin SATA3G_1–4[blue]) P8Z77-VLK SATA 3.0Gb/s connectors
9.ATX power connectors (24-pinEATXPWR; 8-pinEATX12V)
P8Z77-VLK ATX power connectors 11.System panel connector (20-8pin PANEL)
P8Z77-VLK System panel connector •System power LED (2-pinPLED)
•Hard disk drive activity LED (2-pinIDE_LED) •System warning speaker (4-pinSPEAKER)
2.3.1Additional tools and components to build a PC system
2.3.2CPU installation
Page
2.3.3CPU heatsink and fan assembly installation
To uninstall the CPU heatsink and fan assembly
2.3.4DIMM installation
2.3.5Motherboard installation
Page
2.3.6ATX Power connection
2.3.7SATA device connection
2.3.8Front I/O Connector
2.3.9Expansion Card installation
2.3.10Rear panel connection
* LAN port LED indications
** Audio 2, 4, 6, or 8-channelconfiguration 2.3.11Audio I/O connections
Page
1.After making all the connections, replace the system case cover
2.Be sure that all switches are off 5.Turn on the devices in the following order:
a.Monitor b.External SCSI devices (starting with the last device on the chain)
We recommend that you not change the default BIOS settings
EZ Mode Exit/Advanced Mode
3.2.1EZ Mode
3.2.2Advanced Mode
Menu bar Menu items
Back button Submenu items
Pop-upwindow Scroll bar
Security
Administrator Password
User Password The Ai Tweaker menu items allow you to configure overclocking-relateditems
Scroll down to display the following items: Ai Overclock Tuner [Auto]
BCLK/PEG Frequency [XXX] eXtreme Memory Profile
Turbo Ratio [Auto] Ratio Synchronizing Control [Enabled]
Memory Frequency [Auto]
iGPU Max. Frequency [xxx] EPU Power Saving MODE [Disabled]
EPU Setting [Auto] GPU Boost [OK]
DIGI+ VRM
CPU Load-LineCalibration [Auto] CPU Fixed Frequency [xxx]
CPU Power Phase Control [Standard] CPU Power Duty Control [T.Probe]
CPU Current Capability [100%] iGPU Load-lineCalibration [Auto]
iGPU Current Capability [100%] CPU Voltage [Offset Mode]
iGPU Voltage [Offset Mode]
iGPU Offset Voltage [Auto] iGPU Manual Voltage [Auto]
DRAM Voltage [Auto] VCCSA Voltage [Auto]
CPU PLL Voltage [Auto]
CPU Spread Spectrum [Auto] Page
3.5.1CPU Configuration
Intel Adaptive Thermal Monitor [Enabled] Active Processor Cores [All]
Limit CPUID Maximum [Disabled] Execute Disable Bit [Enabled]
Intel Virtualization Technology [Disabled] Hardware Prefetcher [Enabled]
Adjacent Cache Line Prefetch [Enabled] CPU Power Management Configuration
3.5.2PCH Configuration
High Precision Timer [Enabled] Intel(R) Rapid Start Technology
Entry on S3 RTC Wake [Enabled] Entry After [Immediately]
Intel® Smart Connect Technology
ISCT Configuration [Disabled] 3.5.3SATA Configuration
SATA Mode Selection [AHCI]
S.M.A.R.T. Status Check [Enabled] Hot Plug [Disabled]
3.5.4System Agent Configuration
Memory Remap Feature [Enabled] Graphics Configuration
Primary Display [Auto] iGPU Memory [64M]
3.5.5USB Configuration
Legacy USB Support [Enabled] Legacy USB3.0 Support [Enabled]
Intel xHCI Mode [Smart Auto] EHCI Hand-off[Disabled]
3.5.6Onboard Devices Configuration
HD Audio Controller [Enabled] Front Panel Type [HD]
SPDIF Out Type [SPDIF] PCI Express X16_3 slot (Black) bandwidth
Realtek LAN Controller [Enabled]
Realtek PXE OPROM [Disabled] ASmedia USB 3.0 Controller [Enabled]
ASmedia USB 3.0 Battery Charging Support [Disabled] Serial Port Configuration
3.5.7APM
Restore AC Power Loss [Power Off] Power On By PS/2 Keyboard [Disabled]
Power On By PCIE/PCI [Disabled] Power On By Ring [Disabled]
RTC Alarm Date (Days)
— Hour / — Minute / — Second 3.5.8Network Stack
Page
CPU Temperature / MB Temperature [xxxºC/xxxºF]
CPU Fan Speed [xxxx RPM] or [Ignore] / [N/A] Chassis Fan 1/2/3 Speed [xxxx RPM] or [Ignore] / [N/A]
CPU Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage CPU Q-FanControl [Enabled]
Chassis 1/2/3 Q-FanControl [Enabled]
Chassis 1/2/3 Fan Speed Low Limit [600 RPM] Chassis 1/2/3 Fan Profile [Standard]
Anti Surge Support [Enabled] Bootup NumLock State [On]
Full Screen Logo [Enabled] Wait For ‘F1’ If Error [Enabled]
Option ROM Messages [Force BIOS] Setup Mode [EZ Mode]
UEFI/Legacy Boot [Enable both UEFI and Legacy] PCI ROM Priority [Legacy ROM]
Boot Option Priorities Boot Override
ASUS EZ Flash 2 Utility
ASUS O.C. Profile Save to Profile
Load from Profile ASUS SPD Information
Load Optimized Defaults
Save Changes & Reset Discard Changes & Exit
ASUS EZ Mode Launch EFI Shell from filesystem device
3.10.1ASUS Update utility
Launching ASUS Update Updating the BIOS through the Internet
Updating the BIOS through a BIOS file
3.10.2ASUS EZ Flash 2 utility
3.10.3ASUS CrashFree BIOS 3 utility
Recovering the BIOS 3.10.4ASUS BIOS Updater
Before updating BIOS Booting the system in DOS environment
Updating the BIOS file
4.2.1Running the support DVD
4.2.2Obtaining the software manuals
4.3.1AI Suite
Installing AI Suite Using AI Suite
4.3.2TurboV EVO
TurboV Using Advanced Mode
More Settings Allows you to manually adjust the CPU ratio
1.Click Manual Mode, and then click the CPU Ratio tab 2.Click the ON button to activate CPU Ratio
4.Drag the adjustment bar upwards or downwards to the desired value
Auto Tuning
Using Fast Tuning 4.3.3DIGI+ VRM
4.3.4EPU
Launching EPU 4.3.5FAN Xpert+
Launching FAN Xpert+ Using FAN Xpert+
Fan setting 4.3.6Probe
Launching Probe Configuring Probe
4.3.7USB 3.0 Boost
Launching USB 3.0 Boost Configuring USB 3.0 Boost
4.3.8MyLogo2
Using MyLogo Click on
Auto Tune 3.You can click on Booting Preview to preview the boot image. Then click Next
4.Click on Flash to start updating the image to the boot logo At BIOS File
4.3.9Audio configurations
A. Realtek HD Audio Manager for Windows® 7™ B. Realtek HD Audio Manager for Windows XP
4.4.1System Requirements for Intel® 2012 Desktop responsiveness technologies
SSD Capacity Requirements
SSD Partition Capacity Requirements
Intel® Rapid Start storage
4.4.2Intel® Smart Response Technology
Installing Intel® Smart Response Technology Using the Intel® Smart Response Technology
4.4.3Intel® Rapid Start Technology
Creating a partition 4.If your SSD is not initialized and unformatted:
Right click the disk that you want to create the partition, and select Initialize
Right click the unallocated volume, select New Simple Volume
To launch the disk partitioning tool, click
Start > Programs > Accessories > Command Prompt 7.Type diskpart and press Enter
Select the RAW volume which has the same size as the shrinked volume, type select volume
Enabling and disabling the Intel® Rapid Start Technology under the
Recovering the partition
Type
, press Enter
and select the partition where the Intel Rapid Start Technology is installed by typing
4.4.4Intel® Smart Connect Technology
Installing the Intel® Smart Connect Technology Using the Intel® Smart Connect Technology
Advanced tab. To reset to defaults, click Reset All to Defaults
Help About
Topics 4.5.1RAID definitions
4.5.2Installing Serial ATA hard disks
4.5.3Setting the RAID item in BIOS 4.5.4Intel® Rapid Storage Technology Option ROM utility
Creating a RAID set
RAID 0: 128KB
RAID 10: 64KB RAID 5: 64KB
Create Volume CREATE VOLUME
Deleting a RAID set
Exiting the Intel® Rapid Storage Technology Option ROM utility 4.6.1Creating a RAID driver disk without entering the OS
4.6.2Creating a RAID driver disk in Windows® 4.6.3Installing the RAID driver during Windows® OS installation
4.6.4Using a USB floppy disk drive
7.Use Notepad to open the file
Find the and
sections in the file
5.1.1Requirements
5.1.2Before you begin 5.1.3Installing two CrossFireX™ graphics cards
5.1.4Installing the device drivers
5.1.5Enabling the ATI® CrossFireX™ technology Launching the ATI Catalyst Control Center
Enabling Dual CrossFireX technology 5.2.1Requirements
5.2.2Installing two SLI-readygraphics cards 5.2.3Installing the device drivers
5.2.4Enabling the NVIDIA® SLI™ technology Launching the NVIDIA Control Panel
Personalize
Advanced Settings Enabling SLI settings
5.3.1Installing LucidLogix® Virtu MVP™
5.3.2Setting up your display
i-Mode d-Mode
5.3.3Configuring LucidLogix® Virtu MVP™
Main Performance
Applications
Federal Communications Commission Statement
IC: Canadian Compliance Statement Canadian Department of Communications Statement
VCCI: Japan Compliance Statement VCCI Class B Statement
KC: Korea Warning Statement REACH
ASUSTeK COMPUTER INC
Address Telephone
+886-2-2894-3447 Fax

Чем асинхронная логика (схемотехника) лучше тактируемой, как я думаю, что помимо энергоэффективности — ещё и безопасность.

Hrethgir 14.05.2025

Помимо огромного плюса в энергоэффективности, асинхронная логика — тотальный контроль над каждым совершённым тактом, а значит — безусловная безопасность, где безконтрольно не совершится ни одного. . .

Многопоточные приложения на C++

bytestream 14.05.2025

C++ всегда был языком, тесно работающим с железом, и потому особеннно эффективным для многопоточного программирования. Стандарт C++11 произвёл революцию, добавив в язык нативную поддержку потоков,. . .

Stack, Queue и Hashtable в C#

UnmanagedCoder 14.05.2025

Каждый опытный разработчик наверняка сталкивался с ситуацией, когда невинный на первый взгляд List<T> превращался в узкое горлышко всего приложения. Причина проста: универсальность – это прекрасно,. . .

Как использовать OAuth2 со Spring Security в Java

Javaican 14.05.2025

Протокол OAuth2 часто путают с механизмами аутентификации, хотя по сути это протокол авторизации. Представьте, что вместо передачи ключей от всего дома вашему другу, который пришёл полить цветы, вы. . .

Анализ текста на Python с NLTK и Spacy

AI_Generated 14.05.2025

NLTK, старожил в мире обработки естественного языка на Python, содержит богатейшую коллекцию алгоритмов и готовых моделей. Эта библиотека отлично подходит для образовательных целей и. . .

Реализация DI в PHP

Jason-Webb 13.05.2025

Когда я начинал писать свой первый крупный PHP-проект, моя архитектура напоминала запутаный клубок спагетти. Классы создавали другие классы внутри себя, зависимости жостко прописывались в коде, а о. . .

Обработка изображений в реальном времени на C# с OpenCV

stackOverflow 13.05.2025

Объединение библиотеки компьютерного зрения OpenCV с современным языком программирования C# создаёт симбиоз, который открывает доступ к впечатляющему набору возможностей. Ключевое преимущество этого. . .

POCO, ACE, Loki и другие продвинутые C++ библиотеки

NullReferenced 13.05.2025

В C++ разработки существует такое обилие библиотек, что порой кажется, будто ты заблудился в дремучем лесу. И среди этого многообразия POCO (Portable Components) – как маяк для тех, кто ищет. . .

Паттерны проектирования GoF на C#

UnmanagedCoder 13.05.2025

Вы наверняка сталкивались с ситуациями, когда код разрастается до неприличных размеров, а его поддержка становится настоящим испытанием. Именно в такие моменты на помощь приходят паттерны Gang of. . .

Создаем CLI приложение на Python с Prompt Toolkit

py-thonny 13.05.2025

Современные командные интерфейсы давно перестали быть черно-белыми текстовыми программами, которые многие помнят по старым операционным системам. CLI сегодня – это мощные, интуитивные и даже. . .