В этом видеоуроке показана последовательность действий для создания из дисков стандарта SATA/ SAS, подключенных к контроллеру LSI/ Avago, RAID-массива уровня RAID-10 с помощью MSM
Контроллеры фирмы LSI/ Avago поддерживают создание RAID-массивов из подключенных к ним SSD или HDD дисков с интерфейсом SATA или SAS.
Рассмотрим создание RAID-массива через приложение MegaRAID Storage Manager под Windows.
- Запустим инсталляцию программы. Согласимся на установку расширения Visual C++ Redistributable Manager
- В дальнейшем процессе все предлагаемые параметры оставляем по умолчанию, кроме раздела LDAP Logon Information — выбираем No.
- Откроем MegaRAID Storage Manager. Он обнаружит контроллер в списке Remote Servers с локальным адресом 127.0.0.1.
- Для входа в него используем тот же User Name/Password, что и для самого Windows Server.
- На закладке DashBoard выберем Create Virtual Drive. Выберем вариант Advanced, затем — RAID 10.
- В правом меню Drive groups возникнет Spanned Drive Group 1 и под ней — Span 0
- С помощью Add >> перенесем туда два диска, создадим еще один Span 1 кнопкой Create Span и добавим в него оставшиеся два диска.
- Нажмем на кнопку Create Drive Group. Выберем Next.
- На последнем шаге поправим прочие параметры нового массива, поменяем, при необходимости, имя, размер сектора, политику записи, и окончательно закрепим созаднное кнопкой Create Virtual Drive.
- Массив необходимо инициализировать. Выберите в закладке Logical по имени только что созданный RAID массив, правой кнопочкой мыши выведите контекстное меню и задайте команду Start Initialization.
- Прогресс будет виден либо в DashBoard, либо в отдельном окошке, которое открывается по ссылке More details.
Все модели серверов WIT VV | Конфигурация сервера из этого видеоурока | Консоль MegaRAID Storage Manager для Windows Server
MegaRAID Storage Manager мне нужен для того, чтобы воткнуть в свой комп RAID контроллер и прошить его перед установкой в сервер. Прикрепляю к статье интерактивное руководство. MegaRAID Storage Manager есть под разные операционные системы. Будем устанавливать версию для Windows.
Ссылки
Интерактивное руководство В хроме подглючивает, открываете через Firefox.
Avago MegaRAID SAS 9380-8i8e
Более новая софтина: LSI Storage Authority Software
Установка MegaRAID Storage Manager
Качаем MegaRAID Storage Manager.
https://www.broadcom.com/products/storage/raid-controllers/megaraid-sas-9380-8i8e#downloads
Я скачал версию 7.05.00.02.
Данная версия поддерживает контроллеры:
- RAID
- MegaRAID SAS 9362-4i
- MegaRAID SAS 9362-8i
- MegaRAID SAS 9361-4i
- MegaRAID SAS 9361-8i
- MegaRAID SAS 9363-4i
- MegaRAID SAS 9380-8e
- MegaRAID SAS 9381-4i4e
- MegaRAID SAS 9361-8iCC
- MegaRAID SAS 9380-8eCC
- MegaRAID SAS 9364-8i
- MegaRAID SAS 9340-8i
- MegaRAID SAS 9341-8i
- MegaRAID SAS 9341-4i
- MegaRAID SAS 9270-8i
- MegaRAID SAS 9271-4i
- MegaRAID SAS 9271-8i
- MegaRAID SAS 9271-8iCC
- MegaRAID SAS 9286-8e
- MegaRAID SAS 9286CV-8e
- MegaRAID SAS 9286CV-8eCC
- MegaRAID SAS 9265-8i
- MegaRAID SAS 9285-8e
- MegaRAID SAS 9240-4i
- MegaRAID SAS 9240-8i
- MegaRAID SAS 9260-4i
- MegaRAID SAS 9260CV-4i
- MegaRAID SAS 9260-8i
- MegaRAID SAS 9260CV-8i
- MegaRAID SAS 9260DE-8i
- MegaRAID SAS 9261-8i
- MegaRAID SAS 9280-4i4e
- MegaRAID SAS 9280-8e
- MegaRAID SAS 9280DE-8e
- MegaRAID SAS 9280-24i4e
- MegaRAID SAS 9280-16i4e
- MegaRAID SAS 9260-16i
- MegaRAID SAS 9266-4i
- MegaRAID SAS 9266-8i
- MegaRAID SAS 9285CV-8e
- MegaRAID SAS 8704ELP
- MegaRAID SAS 8704EM2
- MegaRAID SAS 8708ELP
- MegaRAID SAS 8708EM2
- MegaRAID SAS 8880EM2
- MegaRAID SAS 8888ELP
- MegaRAID SAS 8308ELP*
- MegaRAID SAS 8344ELP*
- MegaRAID SAS 84016E*
- MegaRAID SAS 8408E*
- MegaRAID SAS 8480E*
- MegaRAID SATA 300-8ELP*
- HBA
- LSI SAS 9211
- LSI SAS 9212
- LSI SAS3041E-R
- LSI SAS3041X-R
- LSI SAS3080X-R,
- LSI SAS3081E-R
- LSI SAS3442E-R
- LSI SAS3442X-R
- LSI WarpDrive SLP-300
- 9212 4i4e-R spec
- 9211-8i/4i-R spec
- LSI Nytro WarpDrive WLP4-200
- LSI Nytro WarpDrive WLP4-400
- LSI Nytro WarpDrive BLP4-400
- LSI Nytro WarpDrive BLP4-800
- LSI Nytro WarpDrive BLP4-1600
- LSI Nytro XD BLP4-400
- LSI Nytro XD BLP4-800
- LSI SAS 9207-4i4e
- LSI SAS 9217-4i4e
- LSI SAS 9207-8i
- LSI SAS 9217-8i
- LSI SAS 9207-8e
- LSI SAS 9201-16e
- LSI SAS 9200-8e
* Контроллеры предыдущих версий должны работать, но не тестировались.
Работает в ОС 32 и 64 бит:
- Windows* 2000
- Windows* 2003
- Windows* XP
- Windows* Vista
- Windows* 2008
- Windows* 7
- Windows* 8
Распаковываем архив:
Запускаем setup.exe.
Запускается инсталлятор.
Install. Требуется C++ пакет.
Условия установки соблюдены. Открывается окно мастера установки.
Next.
Принимаем лицензионное соглашение. Next.
Я выбираю установку для всех пользователей. Next.
Можно сменить папку установки. Next.
Выбираю обычную установку. Next.
Предлагают настроить LDAP, забиваю. Next.
Указываем размер ключа. Поскольку я на своей же машине буду шить контроллер, то эта опция — по барабану. Next.
Вот тут я подвис и оставил значение по умолчанию. Это настройка диапазона времени, за которое выводить уведомления. Мне оно не нужно. Next.
Эта страница предназначена только для того, чтобы нажать кнопку Install или не нажать. Идиотизм.
Начинается установка.
Установка завершена. Finish.
На рабочем столе появляется иконка MegaRAID Storage Manager. Для работу нужна java.
LSI MegaRAID Storage Manager (MSM) v14.11.01.00 for Windows 7 64 bit,
Windows Server 2008 R2 64 bit, Windows 8 64 bit, Windows Server 2012 64
bit, Windows 8.1 64 bit, Windows Server 2012 R2 64 bit.(Requires
Microsoft Visual C++ 2012 Redistributable (x86) 11.0.51106)
LSI
MegaRAID Storage Manager (MSM) v14.11.01.00 for RHEL 5 UP10/UP11
x86_64, RHEL 6 UP4/UP5/UP6 x86_64, RHEL 7 x86_64, CentOS 5 UP10 x86_64,
CentOS 6 UP4/UP5 x86_64, CentOS 7 x86_64, Ubuntu 13.10/14.04 amd64, SLES
11 SP2/SP3 x86_64 bit, SLES 12 x86_64 bit.
—
i was recently looking for this version of the Linux MSM so that i could run it from a Live CD to fix an issue on my Dell R200 server that has a PERC H200 RAID card.
while you can download a recent version from Broadcom, this wasn’t suitable for my purposes and i specifically needed an older release.
i found it very hard to find this anywhere online so once i was able to get a copy i’ve uploaded it here to archive.org for historical preservation purposes.
I have come across many questions about these challenges and stumbled over them repeatedly myself. As tech evolves, this information may be fading but is also relevant for many who still uses these a bit older RAID cards, like myself.
Please observe!
The intended usage of this document is all owners of LSI based RAID cards, rebranded or not, that may want an interface on their Windows machine.
For supported devices see the MSM/ReadMe.txt included in the package.
ReadMe.txt has installation instructions, this text below is an alternative that may be simpler to follow and more pedagogical to read.
ReadMe.txt gives a list of supported devices, but that list is, in my experience, not complete, since I personally run this on a machine with a card (a rebranded Huawei SAS3108) that is not on that list.
This document is provided as-is with no warranties.
There are alternate solutions, there are other configurations of Java, you can have several Java versions on the same system, this text assumes you are not a Java developer or have programmatical knowledge that may lead you to implement other solutions. Feel free to do that, but do not claim the path described here is wrong or flawed in doing so.
Required files download here.
Instructions
Megaraid Storage Manager and Java should not have been installed on the target system. Make sure you don’t have anything that may conflict. I do not know how an upgrade of previous MSM version will work, it has not been tested.
Install Oracle Java i586 (32 bit version).
(My OS is x64, but I could not get the x64 version of Java to work.)
You can always get an updated version from Oracle site but I have included the one I used inside my package.
Choose a destination folder without any spaces in the name, during the Java installation.
In my case I chose C:\OracleJRE32:
After the Java installation is done, set an environment variable to aforementioned folder, call it JRE_HOME and link it to the folder you used to install java, like in my example C:\OracleJRE32
Environment variables are set in System Properties > Environment variables.
See more info in this Microsoft post.
Same is valid for most Windows versions.
Reboot the computer.
Test with a CMD, type: java -version, it should give you the installed Java environment info. Remember the dash before version; “- version”.
Now copy the file [javax.activation.services] in to your Java /bin/ folder, in my example C:\OracleJRE32\bin\
Install MSM
(Yes, it’s the 17.05.06.00 version…)
I selected NO here.
Don’t have a running LDAP
This setting made me try twice, it worked both with 2048 and 1024:
I had no reason to select anything but default here:
Installation successful.
No additional reboot needed.
The file [javax.activation.jar] that is mentioned above and in ReadMe.txt as a separate download is NEEDED as far as I have seen and included in my package.
Lacking this file will cause MSM to not find the server.