-
-
#1
Just thought I would start this off here first.
Has anyone got Civ3 working on windows 10. I have just upgraded from 8.1 and it no longer works. 10 keeps asking me to try running as administrator ,it makes no difference, tried their compatibility options no joy.
Graham
-
-
#2
you have been registered since 2006 and this is your very first post?
t_x
-
-
#3
Where did you install CivIII?
-
-
#4
To answer the first reply, I have run Civ3 on every version since windows 98 without any problems so have had nothing much to say.
As for the second, not sure what you need , anyway its installed on the C drive of an Asus x550c laptop . What I did notice with 8.1, civ seemed to run as a virtual program. I don’t seem to be able to access any of these files now 10 is loaded, considering going back to 8.1 unless someone far cleverer than me can come up with a solution.
Also just found that civ2 no longer works.
Graham
-
-
#5
Where on your C drive is it installed. If it’s under the Program Files (x86) folder that may be your problem. It’s better to have it installed in a separate location to avoid complications with Windows. I have mine installed on a separate HDD from my OS, but the main C drive would work as well.
-
-
#6
you have been registered since 2006 and this is your very first post?
t_x
Be nice, T_x — I registered in 2009, but didn’t make my first post until 2014 either. OK, 5 years between registration and first post is not quite such a big gap as 2006-2015, but graham04 is certainly not the only registered-but-long-silent CFC lurker…
-
-
#7
Where on your C drive is it installed. If it’s under the Program Files (x86) folder that may be your problem. It’s better to have it installed in a separate location to avoid complications with Windows. I have mine installed on a separate HDD from my OS, but the main C drive would work as well.
This did not work for me on Windows 10 64-bit.
When I start the game, Steam shows me in-game for a second or two, then says I am no longer in-game. Nothing pops up.
Edit: My problem was fixable by having «KeepRes=1» and adding «Video Mode=x», where x is a horizontal resolution, into the conquests.ini file in «C:\Program Files (x86)\Steam\steamapps\common\Sid Meier’s Civilization III Complete\Conquests\». This runs the game in a window, which makes it START! Getting a good resolution seem impossible, though.
Edit:Edit: I have Intel graphics, and whenever I use «KeepRes=1», it never starts. So, I can never have 1080p Civ 3…
-
-
#8
Windows 10 removed a driver (SECDRV.SYS) which is required by the SafeDisc copy protection included in Civ3 and a lot of other games from that era. The game may include an old 32-bit unsigned version of that driver itself, but that can’t run on modern Windows versions.
I’m not sure if the Windows 8.1 version of that driver can be installed in Windows 10, but it is probably easier to get a version without copy protection instead. There is even an official one due to lots of people having problem with a Civ3 copy included in a German PC games magazine years ago.
The following site included a patch archive which includes No-CD versions of both the vanilla game and conquests. You should be able to just replace your existing Civilization3.exe and Civ3Conquests.exe (after making copies of your originals), it works without problems on English versions of the game.
http://www.pcgames.de/Civilization-…-Civ-3-Vollversion-Hier-gibts-Abhilfe-401682/
-
-
#9
Tried reloading Civ3 and Conquests on as separate partition using its own folder, no change, tried the downloads from the German site, but again no joy.
Civ edit does still work
Starting to get Civ withdrawal symptoms now so may return to 8.1, unless there is something else to try .
-
-
#10
Be nice, T_x — I registered in 2009, but didn’t make my first post until 2014 either. OK, 5 years between registration and first post is not quite such a big gap as 2006-2015, but graham04 is certainly not the only registered-but-long-silent CFC lurker…
i did not at all mean not to be nice. i only found it interesting and surprising.
t_x
-
-
#11
I didn’t read your question as malice-intended either. You get some really bizzare reactions when you post on forums I guess it’s because with the written word you can only interpret the voice of the writer by means of memory of real-life people that have spoken in the same way. I found your post amusing and light hearted, but some read it as coarse and insulting. I guess it’s similar to how I can’t read some posts as anything other than arrogant even when the writer might just be being normally conversational and why some people think any negative statement is representative of anger rather than a whole host of other intentions.
-
-
#12
i did not at all mean not to be nice. i only found it interesting and surprising.
t_x
Well I guess that maybe you and I read the smiley differently then, but still I also did not mean to sound unfriendly. I only meant my comment as a gentle tease (I probably shouldn’t do that), and if you read it any other way then I apologise. Still friends…?
-
-
#13
…nor did i read your post as not nice… are you by chance female? i mean, my wife sometimes reacts like that…
t_x
-
-
#14
…are you by chance female?
Not the last time I looked, no But now I think I should stop spamming this thread…
On topic, I am now slightly dreading starting up my newly acquired (and hitherto Win8.1) box. I opted for the upgrade a couple of weeks before the end of July, but have not fired it up again since the 29th (because we’re currently on holiday). So I may well be posting additional rants/pleas (or possibly even solutions, although that’s unlikely ) in this thread very soon…
-
-
#15
This is awesome, we need Win 10 guinea pigs ASAP, especially with Win 10 being insta-download instead of waiting for people to buy new systems.
-
-
#16
Sorry guy’s and girls this is one guinea pig who has deserted the ship, back on 8.1 ahh bliss, now where are the those pesky Romans hiding
-
-
#17
Hi,
I have had no joy with the German patches — Civ III still not running on Windows 10. Any other suggestions please?
-
-
#18
To all those trying to run civ3 on Windows 10, I suggest you try using an emulator like virtual box to install Windows 7, 8, 8.1 or whatever and then use that to play civ 3. I haven’t tried this but there shouldn’t be a problem with this process.
-
-
#20
Hmm, sounds like I will keep to XP for a bit longer yet, maybe forever.
Are you facing issues with Civilization III, one of the most popular PC games for Windows and macOS? Whether it’s installation errors, game crashes, or performance problems, this comprehensive guide will help you troubleshoot and resolve these issues. In this blog, you’ll find various methods to fix the most common problems with Civilization III and what to do if the issues persist. Let’s dive in!
Common Issues with Civilization III
Before we start with the fixes, here are some of the common issues players encounter with Civilization III:
- Installation errors on Windows or macOS
- Game crashes or freezes during gameplay
- Low FPS or stuttering
- Audio glitches
- Missing or corrupted files
- Network-related issues during multiplayer sessions
How to Fix Civilization III Issues on Windows and macOS
1. Check System Requirements
The first step in troubleshooting is to ensure your PC or Mac meets the minimum system requirements for Civilization III. Running the game on incompatible hardware is one of the most common causes of poor performance or crashes.
Minimum System Requirements for Civilization III:
- Operating System: Windows 10 or macOS 10.15 or higher
- Processor: Intel Core i5 or equivalent
- RAM: 8 GB
- Graphics Card: NVIDIA GTX 960 / AMD Radeon R9 280 or better
- DirectX: Version 11
- Storage: 50 GB available space
If your system doesn’t meet these requirements, upgrading your hardware is recommended to run the game smoothly.
2. Update Your Drivers
Outdated drivers, particularly for your graphics card, can lead to performance issues or crashes in Civilization III. To resolve this:
- For Windows:
- Open Device Manager.
- Go to Display Adapters.
- Right-click your GPU and choose Update driver.
- You can also download the latest drivers from the official websites of NVIDIA or AMD:
- NVIDIA Drivers
- AMD Drivers
- For macOS: macOS automatically handles driver updates. Ensure you’re running the latest macOS version by going to System Preferences > Software Update.
3. Verify Game Files (Steam or Epic Games Store)
Corrupted or missing game files can prevent Civilization III from running correctly. Verifying the integrity of your game files can fix this.
- On Steam:
- Open Steam and go to Library.
- Right-click on Civilization III and select Properties.
- Go to the Local Files tab and click on Verify Integrity of Game Files.
- On Epic Games Store:
- Open Epic Games Launcher and go to your Library.
- Click on the three dots next to Civilization III.
- Select Verify.
This process will fix any corrupted files and download missing files automatically.
4. Update or Reinstall DirectX (For Windows)
If you’re facing graphical issues or crashes on Windows, outdated DirectX may be the culprit. Download the latest version of DirectX from the official Microsoft website.
5. Check for Game Patches and Updates
The developers of Civilization III frequently release updates to fix bugs and improve game performance. Ensure that you’re running the latest version of the game.
- On Steam or Epic Games Store, updates are usually applied automatically, but you can manually check for updates by visiting the game’s page on these platforms.
6. Optimize In-Game Settings
Lowering the graphics settings in Civilization III can significantly improve performance, especially if you’re experiencing lag or stuttering. Here’s how to adjust them:
- Go to Settings > Graphics in Civilization III.
- Lower settings like Shadows, Anti-Aliasing, and Texture Quality.
- Turn off unnecessary effects such as Motion Blur or V-Sync.
7. Disable Background Applications
Running multiple applications in the background while playing Civilization III can consume valuable system resources. Close unnecessary apps such as web browsers or video players.
- Windows: Open Task Manager by pressing Ctrl + Shift + Esc and end tasks that aren’t needed.
- macOS: Open Activity Monitor from Applications > Utilities and close resource-heavy apps.
8. Fix Network-Related Issues
If you experience network lag or connection problems during multiplayer sessions, try the following:
- Restart your modem or router.
- Switch to a wired connection if you’re on Wi-Fi.
- Disable any VPN or firewall that may be interfering with the connection.
You can also check Civilization III server status by visiting Civilization III official server status page or use third-party monitoring services like DownDetector.
What to Do If the Issues Persist?
If none of the above methods resolve your problem with Civilization III, you may need to:
- Reinstall the Game: Uninstall Civilization III completely and then download it again from a trusted source such as Steam or Epic Games. Ensure that the installation directory is clear of previous files to avoid conflicts.
- Contact Support: Reach out to the official Civilization III support team for assistance. You can typically submit a ticket through the game’s official website or find community forums for additional help.
- Check Online Forums: Gamers worldwide share troubleshooting tips on forums like Reddit and GameFAQs. Searching for your specific issue there may reveal solutions from other players.
Conclusion
By following the steps outlined in this guide, you should be able to fix most common issues related to Civilization III on Windows and macOS. Whether you’re facing installation errors, game crashes, or performance issues, the methods provided will help you get back to enjoying the game.
For more technical support or to download the latest version of Civilization III, visit the official website or the game’s page on Steam or Epic Games. If the problem persists, don’t hesitate to seek further help from Civilization III support or online communities.
Stay tuned for more troubleshooting guides, tips, and tricks on improving your gaming experience!
Windows 10: Running Civ 3 on Windows 10
Discus and support Running Civ 3 on Windows 10 in Windows 10 Software and Apps to solve the problem; So my dad gave me a whole bunch of his old computer strategy games, including a Civilization 3 disk. I’ve spent roughly 8 to 10 hours just trying to…
Discussion in ‘Windows 10 Software and Apps’ started by helpmeplease…, Mar 6, 2022.
-
Running Civ 3 on Windows 10
So my dad gave me a whole bunch of his old computer strategy games, including a Civilization 3 disk. I’ve spent roughly 8 to 10 hours just trying to figure out what the issue is with the download. It doesn’t appear any of my drives need updating, but it keeps stopping at 81% with the message:Component: Min InstallFile Group: Minimum InstallFile: E:\Sounds\build\ancient\AncORd.wavError: Data error cyclic redundancy check.I’ve been looking forward to playing this, so any help would be appreciated!
-
Windows 10 64 bit compatibility issue with old Civ 3 Conquests
Thank you for following up. For better assistance on installing the game on Windows 10, we would suggest that you contact the developer of
Civ 3 Conquests. -
Civ 4 on Windows 10
Is there a similar patch for Civ III?
I assume you found the patch on the Civ Web site, right? If not, where?
Does anyone know if the problem goes away if I run Civ III/IV on a Windows 7 Hyper-V machine under Windows 10?
-
Running Civ 3 on Windows 10
Windows 10 Compatibility — Civ III
Just figured out this issue my self…. sadly it has to do with securom or other similar products not working in windows 10. (This is due to their inherent vulnerabilities and so while it sucks I applaud Microsoft’s choice to no longer support them.)
The fix for it is to get a no-cd patch/crack from one of the various sources out there. I’m having to do this with a lot of my games.
**Be advised** so far as I know this fix will ONLY work for those with the actual CDs for the game. Those with digital downloads from sites like Steam and others will have to find another work around. **
Step 1: Make sure your game is updated to the latest version.
Example: Civ III, Conquests is 1.22.
Step 2: Go forth to google and do a search for No-cd patch Civ III.
Step 3: Download the correct one for your updated game.
Step 4: Replace existing .exe file with the new one.
Step 5: Run the game in XP SP3 compatibility with 640 x 480 screen res, and run as administrator.
Step 6: Play endless hours, cause its still a great game. (And I hate the releases that came after.)
Running Civ 3 on Windows 10
-
Running Civ 3 on Windows 10 — Similar Threads — Running Civ
-
How to get apple music running windows 11 without windows services
in Windows 10 Gaming
How to get apple music running windows 11 without windows services: Hi, I’m trying to get Apple Music stop crashing. Without windows services I debloated windows 11 to get more performance out of my system, and Apple Music crashing after I pick my playlist it crashes and need for speed game works just fine after I downloaded framework. And… -
I run Win 11 as a VM. How can I stop Windows from bugging me about backups.
in Windows 10 Gaming
I run Win 11 as a VM. How can I stop Windows from bugging me about backups.: I asked about this before, but the answer did not work, and the question is lockedI run Win 11 as a VM. The entire VM is backed up via TimeShift in my Debian host every week to an external drive. Plus, I run an export of the VM to an OVA file of the entire VM to a yes another… -
How to get apple music running windows 11 without windows services
in Windows 10 Software and Apps
How to get apple music running windows 11 without windows services: Hi, I’m trying to get Apple Music stop crashing. Without windows services I debloated windows 11 to get more performance out of my system, and Apple Music crashing after I pick my playlist it crashes and need for speed game works just fine after I downloaded framework. And… -
I run Win 11 as a VM. How can I stop Windows from bugging me about backups.
in Windows 10 Software and Apps
I run Win 11 as a VM. How can I stop Windows from bugging me about backups.: I asked about this before, but the answer did not work, and the question is lockedI run Win 11 as a VM. The entire VM is backed up via TimeShift in my Debian host every week to an external drive. Plus, I run an export of the VM to an OVA file of the entire VM to a yes another… -
Can’t change setting developer for powershell to run unsigned scripts?
in Windows 10 Gaming
Can’t change setting developer for powershell to run unsigned scripts?: I tried that and it did not work. Even when I flipped the switch to ON it remains grayed out, but I don’t know why. I also tried to do it through the Group Policy Settings on Computer Configuration / Administrative Templates / Windows Components / Windows PowerShell / Turn On… -
Can’t change setting developer for powershell to run unsigned scripts?
in Windows 10 Software and Apps
Can’t change setting developer for powershell to run unsigned scripts?: I tried that and it did not work. Even when I flipped the switch to ON it remains grayed out, but I don’t know why. I also tried to do it through the Group Policy Settings on Computer Configuration / Administrative Templates / Windows Components / Windows PowerShell / Turn On… -
Cloning using Macrium and running Sysprep before cloning.
in Windows 10 Gaming
Cloning using Macrium and running Sysprep before cloning.: Good morning, I need some advice on cloning identical laptops same brand, same specs, etc.. I read online that I need to run Sysprep before cloning so that the SID will not be duplicated. However, I’m encountering an issue where Sysprep always fails on Windows 11 version… -
Running Civ 3 on Windows 10
in Windows 10 Gaming
Running Civ 3 on Windows 10: So my dad gave me a whole bunch of his old computer strategy games, including a Civilization 3 disk. I’ve spent roughly 8 to 10 hours just trying to figure out what the issue is with the download. It doesn’t appear any of my drives need updating, but it keeps stopping at 81%… -
Civ 4 Will not run.
in Windows 10 Network and Sharing
Civ 4 Will not run.: I would like to run Civ4 on Win 10. None of the compatability settings work.https://answers.microsoft.com/en-us/windows/forum/all/civ-4-will-not-run/99756f39-aedd-4f23-bcd4-55d7661419cc»
Users found this page by searching for:
-
Best compatability settings for civ 3 conquests on windows 10 32 bit
,
-
Best compatability modes for civ 3 when running it on windows 10 pro 32bit
,
-
Best compatability mode for civ 3 conquests on windows 10 pro 32bit
,
- civilization 3 windows 10,
- how to run civ 3 on windows 10
Ниже находится базовый гайд по устранению неисправностей во всех играх. Ознакомившись с ним, вы с высокой долей вероятности решите свою проблему. Гайд обновляется и дополняется, но если вы не нашли ответ на свой вопрос, можете
задать свой вопрос здесь.
Запуск от имени администратора, в режиме совместимости, в окне без рамок
Для начала попробуйте запустить игру от имени администратора. Если игра вышла ранее 2015 года, попробуйте запустить её в режиме совместимости с более старой версией windows, например windows 7 (для очень старых игр можно попробовать Windows XP SP3).
Правой кнопкой мыши по ярлыку игры → свойства → совместимость → ставим флажки «Запустить программу в режиме совместимости с…» и «Запускать эту программу от имени администратора».
Эти два действия очень часто решают проблему запуска и стабильного ФПС.
Если вы играете через Steam или другой лаунчер, попробуйте запускать игру через него (после того, как выполнили действия выше).
Так же часто помогает запустить игру в окне без рамок.
Отключение XMP профиля в Bios
Если вы не знаете, что это такое, то можете переходить к следующему пункту.
Игра Sid Meier’s Civilization III (2001) не запускается в Steam
Попробуйте провести следующие действия по очереди, не все сразу:
- Перезапустить Steam
- Свойства игры → расположение файлов → запуск от имени администратора
- В свойствах запуска игры прописать -windowed -noborder
- Перекачать файлы игры
- Полное удаление и установка игры
Если вы используете пиратку
Есть вероятность, что репак неисправный, подробнее читать тут. Но для начала рекомендуем ознакомиться с пунктами ниже.
Проверка / установка драйверов
Проверьте все драйверы:
- Через автоапдейтер Driver Booster
- или, если у вас ноутбук, зайдите на сайт производителя в раздел драйверов и скачайте их там
Вы так же можете отдельно установить драйвера на видеокарты и сопутствующее ПО на сайтах разработчиков видеокарт, там драйвера появляются быстрее, чем в автоапдейтерах:
- AMD
- Nvidia
Обновление DirectX
Все ошибки, которые имеют в себе приставку D3D, X3D, xinput *** .dll скорее всего сообщают об отсутствии нужных библиотек DirectX
- Скачать веб установщик можно здесь
Может помочь установка библиотек NET Framework
- Скачать Microsoft .NET Framework 3.5
- Скачать Microsoft .NET Framework 4
Обновление библиотек Microsoft Visual C++
Если в названии упоминается приставка MSVC, и если не упоминается, обновление этих библиотек для игр чрезвычайно важно. К тому же даже после установки вы можете заметить, что ошибка повторяется, причина в том, что необходимо скачивать все версии, как х64, так и х86, некоторые игры требуют обе. Скачиваем и устанавливаем ВСЕ версии компонента.
Распространяемые библиотеки Microsoft Visual C++ скачать
Очистка системы с помощью Advanced SystemCare Free
Скачиваем программу
Запускаем, включаем анализ на основе Искусственного Интеллекта. Программа, вероятно, найдет огромное количество мусорных файлов, битых записей в реестре и прочего.
После завершения анализа примените автоматическое исправление
Системные требования Sid Meier’s Civilization III (2001)
Убедитесь, что ваш железный конь соответствует минимальным характеристикам, необходимым для этой игры:
Минимальные
Operating system (Операционная система): Windows 98
Процессор (CPU): Intel Pentium II 400 MHz
System memory (RAM): 32 MB (base game), 128 MB (Conquests)
Hard disk drive (HDD): 1.8 GB
Video card (GPU): DirectX 8.0a (base game), 9.0b (Conquests) compatible
Рекомендуемые
Operating system (Операционная система): Windows ME, 2000, XP
System memory (RAM): 256 MB
Наличие вирусов
Проверьте ваш компьютер на наличие вирусов, можно использовать бесплатные и пробные версии, например:
- Dr. WEB CureIT
Усердный антивирус блокирует запуск Sid Meier’s Civilization III (2001)
Ситуация обратная предыдущей, установленный или встроенный (защитник windows) антивирус блокируют запуск игры, необходимо либо отключить их на время, либо добавить в исключения папку с игрой. Однако, если защитник успел поместить какие-либо файлы в карантин, игру придется переустановить.
Как временно отключить защитник Windows 10
Пуск → Параметры → Обновление и безопасность → Безопасность Windows → Защита от вирусов и угроз → Крутим вниз до пункта «Параметры защиты от вирусов и угроз», кликаем «Управление настройками» → отключаем «Защита в режиме реального времени».
Как добавить файлы и папки в исключения защитника Windows
Пуск → Параметры → Обновление и безопасность → Безопасность Windows → Защита от вирусов и угроз → Крутим вниз до пункта «Исключения», кликаем «Добавление или удаление исключений» → нажимаем «Добавить исключение» → выбираем нужный файл или папку
Sid Meier’s Civilization III (2001) изображение выходит за края, изображение не разворачивается на весь экран, неправильное расположение окна игры, проблемы с разрешением экрана
Проверьте в настройках игры пункты «разрешение экрана» и «на весь экран».
Проблема может крыться в неправильном масштабировании. Необходимо перейти в свойства ярлыка → изменить параметры высокого DPI → поставить флажок в самом низу и нажать ОК
Sid Meier’s Civilization III (2001) неправильно определяет монитор, запускается не на том мониторе
Если вы пытаетесь вывести игру на другой монитор, вам может помочь статья 5 способов вывести игру на второй монитор.
Sid Meier’s Civilization III (2001), скачанная с торрента, не работает
Пиратские версии вообще не гарантируют стабильной работы, их разработчики не отвечают перед вами за качество продукта, жаловаться некуда. Есть вероятность, что репак окажется нерабочим, или недоработанным именно под ваши характеристики. В любом случае мы рекомендуем пользоваться лицензионными версиями игр, это убережет ваш компьютер от всевозможных программ-шпионов, майнеров и прочей нечисти, так же обеспечив стабильную поддержку и выход новых патчей от разработчиков.
Sid Meier’s Civilization III (2001) не скачивается или скачивается долго. Лагает, высокий пинг, задержка при игре
В первую очередь проверьте скорость своего интернет-соединения на speedtest.net, если заявленная скорость в порядке, проверьте, не загружен ли ваш канал, возможно у вас подключено несколько устройств к вай-фаю, идет обновление операционной системы, скачивается что-то в браузере, или запущен фильм. Посмотрите нагрузку на сеть в диспетчере устройств. Проверьте целостность кабеля, идущего к вашему устройству. Если вы все же пользуетесь торрентом, возможно, скорость раздачи ограничена из-за нехватки раздающих. В крайнем случае вы всегда можете позвонить своему провайдеру и узнать, все ли в порядке с вашей линией.
Sid Meier’s Civilization III (2001) выдает ошибку об отсутствии DLL-файла
Запишите название DLL файла и скачайте его, используя сайт ru.dll-files.com, там же будет описание, что именно это за файл и где он должен находиться.
Sid Meier’s Civilization III (2001) не устанавливается. Установка прекращена, прервана
Проверьте наличие свободного места на вашем диске. Если с местом все в порядке, рекомендуем так же проверить диск на наличие битых секторов с помощью бесплатных программ VictoriaHDD или CrystalDiskInfo
Sid Meier’s Civilization III (2001) зависает, застывает изображение
Проблема вполне может быть вызвана самой игрой, это хороший вариант. Но такое поведение может свидетельствовать о неполадках в работе процессора и видеокарты. Проверьте температуры CPU и GPU, нормальный уровень можно узнать на сайте разработчика по модели устройства. Если температура завышена, устройство уже не на гарантии и его давно не чистили, сделайте это сами (если понимаете как) или отнесите в сервисный центр на чистку и замену термопасты, если проблема не устранена, есть вероятность сбоя других компонентов: материнской платы, оперативной памяти или блока питания.
Sid Meier’s Civilization III (2001) тормозит. Просадки частоты кадров. Низкий FPS (ФПС)
Вероятно вашему ПК не хватает мощности для стабильной работы Sid Meier’s Civilization III (2001).
- Включите счетчик FPS в настройках Steam или установите любую другую программу для этого на свой вкус. Нам необходимо выйти на стабильные 60 кадров.
- Для начала включите вертикальную синхронизацию
- Вы так же можете поставить масштабирование DLSS (XeSS, FSR) на качество или на баланс (больше производительности, чуть хуже картинка), если у вас современная карта и игра поддерживает эти технологии
- Если не помогло, попробуйте понизить все графические настройки до минимума, кроме разрешения экрана
- После повышайте до тех пор, пока картинка остаётся комфортной. Если же понижение не помогло, остаётся только понижать разрешение.
В Sid Meier’s Civilization III (2001) нет звука. Ничего не слышно
Проверяем звук в настройках игры. Проверяем звук на самом ПК, например музыку в браузере. Если ничего нет:
- проверьте уровень звука в windows (вашей ОС), возможно уровень звука установлен в 0
- проверьте правильность подключения колонок, наушников
- если устройство нестандартное, ему могут потребоваться свои драйвера от разработчика
- возможно нет драйверов на звук в системе вообще (обновляем, смотри первый пункт)
- в крайнем случае есть вероятность, что вышла из строя звуковая карта
Sid Meier’s Civilization III (2001) не видит мышь, клавиатуру или геймпад. Не работает управление
Первым делом перейдите в настройки игры и проверьте, переключено ли у вас устройство управления на геймпад (если проблема в нем). Плотно ли подключены провода? Работают ли устройства вне игры? Решением может быть проверка драйверов с помощью утилит (смотри первый пункт) или банальное отключение → подключение.
Sid Meier’s Civilization III (2001) ошибка 0xc0000142
Если Sid Meier’s Civilization III (2001) выдает ошибку 0xc0000142, устранить проблему можно одним из способов, указанных ниже. Лучше всего пробуйте один за другим, пока проблема не решится.
- При загрузке игры отлючите все антивирусные программы.
- Проверьте путь к папке игры, все должно быть записано латинскими буквами (английскими). Например C:\Games\Game Folder.
- Имя пользователя Windows тоже должно быть указано латиницей. Нажмите Win+R → наберите команду netplwiz → выделите имя пользователя → Свойства.
- Зайти в свойства игры, кликнув правой кнопкой мыши по ярлыку. Совместимость → Режим совместимости → Выберите режим совместимости отличный от вашей ОС → Поставьте галочку «Запускать от имени администратора«.
Если эти советы не помогли, значит надо искать проблему в стабильности работы ОС и в файлах игры.
- С помощью Advanced SystemCare Free проведите стандартную очистку.
- Замените значение реестра: Поиск → Редактор Реестра → HKEY_LOCAL_MACHINE → SOFTWARE → Microsoft → Windows NT → CurrentVersion → Windows → LoadAppInit_DLLs → в строке Значение замените 1 на 0.
- Проверьте компьютер на наличие вредоносных программ и вирусов. После проверки и чистки перезагрузите ПК и снова загрузите игру.
- Проверьте, чтобы у вас были установленные все необходимые версии компонентов, а именно Microsoft Visual C++, DirectX, Драйвера (смотри пункты в начале).
Страница 1 из 2
-
Beckham
Засранец из Преисподни- Регистрация:
- 4 апр 2007
- Сообщения:
- 494
Скачал с интернета образ civilization 3. Она не запускалась, так как требовала оригинальный диск. Я скачал NOCD. Заменил оригинальный файл на NOCD и она перестала работать. Пишет мол ошибка, отправьте письмо какой-то бабушке. Это как-нибудь лечиться? Пробовал совместимость, не помогает.
-
ну вот, уже и Civ3 не запускается…
версию цивилизации и версию nocd смотрел?
а вообще — запиши на болванку и играй без nocd.
-
Это явно проблема конкретной версии — похожая и именно с этой игрой была у balakshin‘а (он писал об этом в теме про образ диска). Ему удалось решить её с помощью какого-то конкретного no-cd. Думаю, надо попросить у него этот файл.
Ну, или пробовать другие no-cd — их наверняка как минимум несколько. -
Beckham и kreol нравится это.
-
Beckham
Засранец из Преисподни- Регистрация:
- 4 апр 2007
- Сообщения:
- 494
Всем спасибо, тему можно закрывать. Я скачал дополнение conquest’s. А для него NOCD найти не трудно.
добавлено через 36 минут
НЕТ!!! Дополнение не работает! требует какой-то dll файл!добавлено через 39 секунд
НЕТ!!! Дополнение не работает! требует какой-то dll файл!Последнее редактирование: 22 сен 2008
-
Beckham, извини, но фраза «какой-то» в вопросе неприемлема. Надо обязательно указать, какой. И попробовать поискать его на каком-либо *.dll-хранилище.
А заодно сообщить, в какой конкретно момент дополнение файл требует — при непосредственно запуске, попытке установки, в главном меню… -
Sergo15
- Регистрация:
- 11 май 2008
- Сообщения:
- 24
-
Lena
- Регистрация:
- 16 июл 2006
- Сообщения:
- 417
Sergo15, большое тебе от меня человеческое спасибо. Пропатченная игра прекрасно запустилась без всяких аддонов, которые меня в восторг совсем не приводят.
-
Beckham
Засранец из Преисподни- Регистрация:
- 4 апр 2007
- Сообщения:
- 494
Большое человеческое спасибо!
-
Wax
- Регистрация:
- 12 янв 2009
- Сообщения:
- 2
Прошу прощение, что поднял старую тему.
Проблема такая: не так давно приобрёл ноутбук asus eeePC 904HD. Вспомнив про игруху Civilization 3, решил поставить. Но, как, может быть,
многие помнят, игра требует разрешения 1024х768. Стандартное разрешение ноута 1024х600. Игра естественно не запускается. Прописывание KeepRes=1 в различных ini-файлах не помогает.
Может быть, кто сталкивался, помогите пожалуйста заранее спасибо! -
Lithum
- Регистрация:
- 17 окт 2005
- Сообщения:
- 105
-
Lithum, а для чего тебе это?
Вполне возможно, что никак. -
не знаю как на счёт окна, но можно заставить работать в разрешении экрана. соответственно, если выставить разрешение экрана на 800х600. но это, видимо, не то, что тебе нужно.
———- Добавлено в 15:51 ———- Предыдущее сообщение было написано в 15:45 ———-
А вообще, по форумам порыл сейчас — нельзя в окне запустить никак, судя по всему.
———- Добавлено в 15:54 ———- Предыдущее сообщение было написано в 15:51 ———-
хы, можно попробовать через виртуал рс)) он же в окошке работает?))
-
Lithum
- Регистрация:
- 17 окт 2005
- Сообщения:
- 105
-
Eraser
ЧистильщикХелпер
- Регистрация:
- 29 дек 2001
- Сообщения:
- 10.465
Оно и так переключается очень быстро и стабильно.
-
Lithum, у тебя обычная Цива, без дополнений?
ЕМНИП в Conquests (и возможно в обычной Циве) можно было в файле conquests.ini (или civilization.ini для обычной Цивы) вписать следующее:— игра запустится с разрешением рабочего стола. Сейчас попробовал на Conquests — нормально растянулась на 1280х1024, правда масштаб карты увеличивается и размер текста сильно уменьшается, соответственно ничерта не видно Прицепил скриншот для примера — это в 1280х1024.
или
— по идее игра должна пойти в 800х600
Если вписать и KeepRes=1 и Video Mode=800, скорее всего будут какие-то артефакты или глюки.
В общем вот на буржуйском форуме тема по этому вопросу: http://forums.civfanatics.com/archive/index.php/t-54348.html
Вложения:
Последнее редактирование: 26 янв 2010
-
Lithum
- Регистрация:
- 17 окт 2005
- Сообщения:
- 105
2 Балакшин
Если честно, все это пробывал, другое дело, что ничего из этого не работает! ((( у меня классическая цива, в файле civilization.ini все это добавлял, ничего это не дает! То есть совсем! У меня и так экран 1024, так что она просто запускается в 1024, и все. как ни правлю — ничего не меняется ((( -
Lithum, похоже и не удастся запустить в разрешении ниже 1024х768, т.к. я сейчас в мануале прочитал следующее: «Video card compatible with DirectX 8.0a and capable of at least 1024×768 resolution and 16-bit color depth»
kreol, Lithum и Eraser нравится это.
-
Lithum
- Регистрация:
- 17 окт 2005
- Сообщения:
- 105
Спасибо, тогда все понятно. Эх, жаль
Страница 1 из 2