Today a big day that we are writing on the Dell PC which will enjoyable and good for the Dell readers. We have seen from the past experiences that there are many Windows 10 Dell users which are looking to enter into Windows 10 Safe Mode Dell. We earlier said that there are many old ways of getting the Safe Mode in Windows 10. For example, in the past, you can get How to Start Windows 10 Safe Mode F8. Also, many users do same that to open the Safe Mode using Windows 10 Safe Mode From Command Prompt.
To get any errors in Windows 10, you can go and choose to Safe Mode. In this article, we will describe How to enter into Safe Mode in Windows 10 Dell.
How to get into Windows 10 Safe Mode Dell Laptop in single Click
In a single click means you can enter the Safe Mode with Restart button. For this, we are going to introduce the easiest way. Follow the below Steps:
- Go to Start Menu > Click on the Power Button.
- Hold down the Shift Key and keep press the Restart button.
- A new Blue Screen will appear where you have three options:
- Continue
- Troubleshoot
- Turn off your PC
Three options here you have. Click on the Troubleshoot then click on Advanced Options. In the advanced options, you may have different options like:
- System Restore
- Command Prompt
- System Image Recovery
- Startup Settings.
- Startup Repair
- Go back to the previous version
Here you have to choose Startup Repair for entering into Windows 10 Safe Mode Dell. Furthermore, your PC will automatically restart. After a restart, there are two types of Windows 10 Safe Mode:
- Enter Safe Mode in Normal Mode.
- Safe Mode with Networking.
Both the ways are same, In networking, you can use the internet in Safe mode in Windows 10.
Get into Windows 10 Safe Mode Dell using F8 keyPress
As we know that there does not display such feature that we get into Windows 10 Safe mode dell using F8 or Shift F8 key. But we will tell you the easy way using the F8 key in Windows 10.
How to enable Windows 10 Safe Mode using F8 key Dell
Open the Command prompt in admin mode. For example, go to Start menu or Cortana Search type “Command Prompt”. Right Click on it and “Run as Administrator”. Copy the below command and paste it into your Command prompt and press Enter.
BCDEDIT /SET {DEFAULT} BOOTMENUPOLICY LEGACY
This command will enable or fix the pressing F8 key or Shift + F8 key in Windows 10 permanently. On the other hand, you can also disable this feature in Windows 10 for Windows 10 Safe mode using F8 key by using the below Command. After then, whenever you like, you can enable this feature again.
Note: After enabling this, don’t forget to Restart your PC. because once you restart then press the F8 key or Shift + F8 key then Windows 10 Safe Mode Dell laptop works.
How to disable Windows 10 Safe Mode using F8 key Dell
BCDEDIT /SET {DEFAULT}BOOTMENUPOLICY STANDARD
That’s all!
What to do if F8 Windows 10 Safe Mode now Working?
We recommend following the few steps in Windows 10 to go into Safe mode with another way using System COnfiguration.
- First of all, using keyboard press Windows+R.
- Find from List and Press the Run Option.
- Type msconfig in the Run.
- From the top Menu Bar, Select Boot.
- Now there are few options.
- Minimal: It is used for Normal Windows 10 Safe Mode F8.
- Second is, Alternate shell: If you want to enter Windows 10 Using Command Prompt only.
- Third, Active Directory repair: It is used to repair the Active Directory server.
- Fourth, Network: Its mean you can get into safe mode with networking in Windows 10.
- After reboot, you are in Safe Mode Windows 10.
Conclusion for Windows 10 Safe Mode Dell:
Above we have mentioned how to enter the Safe Mode in Dell using simple ways. We use System Configuration, F8 or Shift F8 key and Restart option to enter Windows 10 Safe mode dell.
Let us know in the Comment if you have any problem.
The F8 button may be manually enabled by going to the Configuration Management tool (MSConfig) and selecting the Startup tab. You could also attempt to launch Safe Mode by holding down the Shift button when selecting “Restart” from the Menu Bar or the login display. You can attempt to reboot into the restoring force and run a restart fix if none of the abovementioned approaches succeed.
Suppose you updated to Windows 10 from an earlier edition of windows, such as Win XP or Windows 7. In that case, you could have discovered that the F8 functionality key you previously used to launch Safe Mode isn’t any longer usable.
Your keypad retains the F8 button, which you can utilize in conjunction with those other keys to carry out specific tasks, mainly if your mouse or pad isn’t functioning and you must utilize shortcut keys in its place.
This post will explain what to do if F8 ceases to function in Dell Win 10.
Why Doesn’t F8 function in dell Win 10?
Safe Mode is a built-in functionality of Windows that can be utilized to fix several issues, including driver installation challenges, difficulties starting Windows, spyware, or virus-related concerns, amongst many others.
The reboot duration was made faster by removing the F8 boot menu.
Since Windows 10 starts up considerably quicker than past editions, you cannot click the F8 button to begin Windows in Standby Mode.
Additionally, it cannot identify critical presses made during the initialization phase, reducing exposure to the booting choices display where the Safe Mode choice is available.
Rather, you can now get debugging tools like Safe Mode and many others through Microsoft’s newly Designed Startup Alternatives menu section.
The Safety Mode attribute continues to remain accessible by hitting the F8 button; however, you need to re-enable it and use some easy steps actively.
There are additional ways to enter Safe Mode as well. However, they’re more complicated.
4 ways to Solve Dell F8 not responding issue
Re-enable the F8 button manually
- In the search field, enter CMD and select Run as Admin.
- Use the commands bcdedit /set defaults bootmenupolicy heritage inside the Command Line.
Recall that Windows has a built-in tool called BCD Edit CMD that manages how the os launches. Additionally, it makes reactivating the F8 start panel simple.
- When your computer restarts and you continually click the F8 button on your computer during startup, the Advanced Boot Settings menu will show up. From this, you might choose Safe Mode, Secure Mode plus Network, or Secure Mode using Command Line.
Launch the elevated prompt and execute the command “to turn off the F8 button once more: bcdedit /set default bootmenupolicy standard.
Go into Standby Mode using the Start Button
- Choose Settings after clicking Start.
- In the configuration menu, press Upgrade & Safety afterward.
- Press Restore in the left pane, followed by Reboot immediately.
- The Choose an Alternative display will appear after an automated reboot of Windows. Troubleshoot by clicking.
- Then select Advanced Options.
- Hit Launch Configuration afterward.
- A display with many launch settings will emerge.
- To activate Safe Mode, hit the F4 button on your computer. Based on what you need to accomplish, click the matching button to activate Safe Mode using Network or CMD Prompt.
Worth noting: To reboot your computer, Press On Start, right-click the Start button, and then press and hold the Shift key. When the Windows operating system resumes, the Choose an Alternative box appears, allowing you to proceed with the instructions to enter Safe Mode.
Launch Safe Mode using the configuration settings
System setting sometimes referred to as MSConfig, is a tool for Windows start issues.
To identify the cause of the problem you’re having, it can deactivate or allow device drivers plus apps that execute throughout startup.
In contrast to other approaches enabling you to redo several actions simply to access Recovery Mode, it saves a lot of time.
- Whenever the Run dialog box appears, enter MSConfig by pressing the Window key+R. Next, press OK or hit Enter.
- Check the Secure Boot box after clicking Start. Choose Minimum, then hit OK. You may choose from alternatives like Networking Standby Mode with Network support, Active Directory Repair, and Alternate Shell Secure Option with Comd Prompt, according to your requirements.
- For such modifications to enter into force and for Windows to reboot in Standby Mode, press Apply > OK.
Open the Launch settings window once more, uncheck the checkbox beside Secure Boot, then press OK to leave Safe Mode from Configuration.
To make the modifications effective and reboot your pc correctly, press Reboot.
Go into Standby Mode when Windows doesn’t usually start
A minimal collection of drivers and apps are loaded in Standby Mode.
You could reboot your computer twice and access the Automated Repair display, where you can access Safe Mode, even if Windows won’t start.
- Press and hold the Power key until the computer is switched off after ensuring it is off. To start the start recovery method, continue this roughly twice or three times till the Conducting Automated Repairs display shows.
- Once you turn on the laptop for the initial time and encounter the Conducting Automated Repairs display, move to the subsequent stage, and indeed the Trying to diagnose Your Computer display will show. The notice “Trying fixes” will come next.
- Windows will display a notice saying that Automated Fix could not fix your computer while offering you the Closure and Advanced functionality in the Starting Maintenance window. Select advanced choices.
- On the Select an alternative display, select Troubleshooting.
- Choose Advanced Settings afterward.
- Launch Settings by clicking.
The very next page will display various start alternatives after your computer restarts.
To activate Security Tab, click the F4 button or the numeral four key on your keypad.
You could also click the relevant key to launch Safe Mode with Comd Prompt or Network based on your intent.
Worth noting: If Windows cannot launch, you may begin your computer in Standby Mode using a bootable USB or installation disc for Windows 10. You may activate Recovery Mode by starting the laptop using a bootable disk or installation disc.
Final Words
We’ve searched high and low to inform you how to use Win 10 Safe Mode whenever F8 is not functioning.
Maintain awareness of each suggested solution because you will eventually come up with one.
Additionally, be sure to keep your system requirements updated. I hope this post has resolved your issue!
Learn more
Patrick Johnson is a tech enthusiast & blogger; currently living in Florida, United States. He loves to write about Laptop Tips, Guides, configurations, features, and Accessories. Quora is where you will also find him. No matter what questions you have in your mind regarding the laptop, he may already have the answer.
To start your Dell laptop in safe mode on Windows 10, please follow these steps:
1. On the sign-in screen, press and hold the Shift key on your keyboard while clicking the Power button > Restart.
2. After restarting, you will see a list of options. Select Troubleshoot > Advanced options > Startup Settings > Restart.
3. Once your laptop restarts again, press 4 or F4 to enter Safe Mode or press 5 or F5 to enter Safe Mode with Networking.
4. Your laptop should now be in Safe Mode and you can use it as needed for troubleshooting purposes.
It may also help to run a virus scan using updated antivirus software before attempting to start in Safe Mode, as this may help identify if any malicious software is preventing the normal startup process of your laptop.
How do I force my laptop into Safe Mode Windows 10?
How do I force my computer to start in Safe Mode?
It depends on what operating system you are using, but generally the steps to force your computer to start in Safe Mode are as follows:
1. Start or restart your computer.
2. When you see the logo for the manufacturer of your computer (Dell, Acer, etc.) press and hold down either the ‘F8’ key or ‘Shift + F8’ key until a menu appears.
3. Use the arrow keys to navigate to «Safe Mode» and then hit enter/return.
4. Your computer should now boot into Safe Mode where you can troubleshoot any issues that you may be having with it.
If these steps do not work for your particular operating system, please consult a user manual or search online for instructions specific to your OS version and laptop/computer model.
What is the Safe Mode key in Dell Windows 10?
The Safe Mode key in Dell Windows 10 is the F8 key. To start your computer in Safe Mode, press and hold the F8 key while it’s booting up. This will bring up a menu with a number of options; select “Safe Mode” from this list to start the computer in Safe Mode. For additional information on using Safe Mode in Windows 10, please refer to Microsoft’s support page at https://support.microsoft.com/en-us/help/12376/windows-10-start-your-pc-in-safe-mode
How do I start my computer in Safe Mode when F8 doesn t work?
If F8 does not work to start your computer in Safe Mode, you can try the following steps:
1. Restart your computer and press and hold the «Shift» key as soon as it begins to boot up. This will enable a menu with an option for “Safe Mode”.
2. If that doesn’t work, try restarting your computer again and pressing and holding any of the F keys (F1 through F12). There should be an option for “Safe Mode” on one of them.
3. If you are still unable to get into Safe Mode, you may need to access your BIOS settings by pressing a key like Delete or F2 as soon as your computer begins to boot up. Look for an option related to «Boot Options» or «Advanced Boot Options«. You should then be able to select Safe Mode from there.
4. If all else fails, consider restoring the system defaults in the BIOS settings which should allow you access in Safe Mode without any additional steps required.
I hope this advice helps!
Does Windows 10 have F8 Safe Mode?
Yes, Windows 10 has F8 Safe Mode. To access it, restart your computer and press the F8 key repeatedly when you see the Windows logo during startup. This will bring up a menu with various options for starting Windows in different modes. Select Safe Mode from this menu to boot into a minimal version of Windows with only essential drivers and services running. You can then troubleshoot any problems that may be causing your computer to run slowly or not start correctly.
Is Safe Mode f2 or F8?
It depends on the version of Windows you are using. Generally, F8 is used to access Safe Mode in Windows 7 and earlier versions, while F2 is used for Windows 8 and later. To access Safe Mode, restart your computer and press either F2 or F8 when prompted. You may have to try both keys if you are unsure which one works for your version of Windows. Once you are in Safe Mode, you will be able to troubleshoot any issues that may be preventing your computer from starting up normally.
Is Safe Mode f5 or F8?
No, Safe Mode is typically accessed with the F8 key on most PCs. However, some newer computers may use the F5 key to access Safe Mode. To determine which key you should use to access Safe Mode on your computer, please follow these steps:
1. Hold down the Windows Key and R together at the same time
2. Type “msconfig” in the box that appears and hit Enter
3. In System Configuration window, click on Boot tab
4. Look for an option labeled “Safe boot” or «Enable Safe Boot«. If it is present, then press F5 to enter safe mode when restarting your PC; if not present then press F8 to enter safe mode when restarting your PC.
How do I enable F8 Safe Mode in Windows 10?
To enable F8 Safe Mode in Windows 10, you can follow these steps:
1. Open the Run dialog box by pressing the Windows key + R on your keyboard.
2. In the Run dialog box, type «msconfig» and press Enter.
3. This will open up the System Configuration window.
4. Select ‘Boot’ from the tabs at the top of this window and then tick ‘Safe Boot’ under Boot options section and click OK button to save changes.
5. A pop-up window will appear asking how do you want to restart your computer; select ‘Restart’ option and click OK button to restart your computer in safe mode with F8 key enabled now.
6. When you restart your PC, keep pressing F8 until a list of startup menus appear on screen; choose Safe Mode option from this menu and press enter to boot in safe mode with F8 key enabled now!
I hope this advice helps!
Разбираемся, зачем нужен безопасный режим и как в него зайти на компьютере с Windows 10.
Что это
Через настройки
При включении ПК
Командная строка
На ноутбуке
Windows не загружается
Проблемы
Что это
Через настройки
При включении ПК
Командная строка
На ноутбуке
Windows не загружается
Проблемы
Иногда Windows 10 не запускается корректно — из-за сбоев драйверов, поврежденных обновлений, конфликтов программного обеспечения или вредоносного ПО. В таких случаях можно загрузить систему с минимальным набором компонентов, чтобы устранить неполадки: удалить неработающие утилиты, откатить обновления или провести проверку на вирусы. Объясняем, как войти в безопасный режим и что делать, если возникли ошибки.
Что такое безопасный режим и зачем он нужен
Безопасный режим Windows 10 — это специальный режим запуска системы, при котором загружаются только основные драйверы и системные службы. Он используется для диагностики и устранения неполадок, мешающих стабильной работе компьютера.
В этом режиме не запускаются сторонние программы и элементы автозагрузки, что позволяет удалить вредоносное ПО, откатить проблемное обновление, отключить конфликтующий драйвер или восстановить систему. Ограниченный формат использования особенно полезен, если стандартная загрузка Windows невозможна или происходит с ошибкой.
Как зайти в безопасный режим через настройки Windows 10
Безопасный режим можно включить через интерфейс системы, если Windows загружается штатно. Способ подойдет в случаях, когда система работает, но требуется провести диагностику или устранить неполадки.
Способ 1. Использование функций «Параметры» и «Восстановление»
-
Откройте меню «Пуск» и перейдите в «Параметры» → «Обновление и безопасность».
-
Выберите вкладку «Восстановление».
-
В разделе «Особые варианты загрузки» нажмите кнопку «Перезагрузить сейчас».
-
После перезагрузки откроется экран с выбором действий. Нажмите «Поиск и устранение неисправностей» → «Диагностика» → «Дополнительные параметры» → «Параметры загрузки», затем выберите «Перезагрузить».
-
После повторной перезагрузки появится список параметров. Нажмите клавишу 4 или F4, чтобы загрузить Windows в безопасном режиме.
Способ 2. Перезагрузка в безопасном режиме через меню «Пуск»
-
Откройте меню «Пуск» и нажмите на кнопку выключения.
-
Удерживайте клавишу Shift и одновременно выберите «Перезагрузка».
-
После этого откроется тот же набор дополнительных параметров, описанный в первом способе. Дальнейшие действия — такие же: «Диагностика» → «Дополнительные параметры» → «Параметры загрузки» → «Перезагрузить», затем нажмите 4 или F4.
Как войти в безопасный режим при включении компьютера
Если система не загружается корректно, но экран входа в Windows появляется, безопасный режим можно включить до авторизации пользователя. Ниже — два способа, которые подходят для этой ситуации.
Способ 1. Комбинация клавиш Shift + Перезагрузка
-
На экране ввода пароля нажмите и удерживайте клавишу Shift.
-
Одновременно нажмите на значок питания в правом нижнем углу и выберите «Перезагрузка».
-
После перезагрузки появится меню. Выберите «Поиск и устранение неисправностей» → «Дополнительные параметры» → «Параметры загрузки».
-
Нажмите кнопку «Перезагрузить».
-
После этого откроется список параметров. Нажмите клавишу 4 или F4, чтобы войти в безопасный режим. Для безопасного режима с поддержкой сети — F5.
Способ 2. Загрузка с использованием клавиши F8
Ранее для запуска безопасного режима использовалась клавиша F8, но в Windows 10 эта функция по умолчанию отключена. Ее несложно вернуть.
-
Запустите командную строку от имени администратора, если система еще загружается.
-
Введите команду: bcdedit /set {default} bootmenupolicy legacy и нажмите Enter.
-
После выполнения команды перезапустите компьютер.
-
Во время запуска многократно нажимайте клавишу F8, пока не появится меню дополнительных вариантов загрузки.
-
Выберите безопасный режим и нажмите Enter.
Обратите внимание: способ работает не на всех устройствах, особенно при использовании UEFI и SSD-дисков с быстрой загрузкой.
Для возвращения режима по умолчанию замените в команде legacy на standard, подтвердите ввод и перезагрузите девайс.
Как зайти в безопасный режим с помощью командной строки
Этот способ подойдет, если Windows загружается нормально. С его помощью можно заранее задать безопасный режим при следующем запуске системы.
Ввод команды msconfig и настройка загрузки
1. Нажмите комбинацию клавиш Win + R, чтобы открыть окно «Выполнить».
2. Введите команду msconfig и нажмите Enter.
3. В открывшемся окне выберите вкладку «Загрузка».
4. Установите флажок «Безопасный режим» и выберите подходящий вариант.
-
Минимальная — загружается только основное системное окружение, без сети.
-
Сеть — безопасный режим с поддержкой подключения к интернету.
-
Другая оболочка — вариант с доступом к командной строке.
-
Восстановление Active Directory — используется в корпоративных сетях для устранения сбоев в доменной структуре.
Нажмите ОК, затем выберите «Перезагрузка», чтобы войти в безопасный режим.
Как вернуть обычный режим после безопасного
Откройте msconfig. Во вкладке «Загрузка» снимите флажок с параметра «Безопасный режим» и сохраните изменения. Перезагрузите компьютер — система запустится как обычно.
Как войти в безопасный режим на ноутбуке
На ноутбуках с Windows 10 безопасный режим запускается теми же способами, что и на стационарных компьютерах. Однако некоторые производители используют особые клавиши или сочетания при загрузке. Ниже — основные варианты.
-
Через меню настроек Windows. Перейдите в «Параметры» → «Обновление и безопасность» → «Восстановление» и выберите «Перезагрузить сейчас» в разделе «Особые варианты загрузки».
-
С помощью клавиши Shift при перезагрузке. На экране входа или в меню «Пуск» зажмите клавишу Shift и нажмите «Перезагрузка». Далее следуйте инструкциям для входа в безопасный режим.
-
Через окно «Выполнить» и команду msconfig. Нажмите Win + R, введите msconfig, во вкладке «Загрузка» выберите безопасный режим и перезагрузите устройство.
-
Через командную строку. Откройте ее с правами администратора и выполните команду bcdedit /set {default} safeboot minimal, затем перезагрузите ноутбук.
-
С помощью клавиши F8 (если включена). Для этого предварительно активируйте командой bcdedit /set {default} bootmenupolicy legacy, затем при запуске удерживайте F8. На некоторых моделях ноутбуков требуется дополнительно нажимать клавишу Fn.
Клавиши запуска могут отличаться в зависимости от производителя. Например, на ноутбуках Lenovo, HP, ASUS или Acer доступ к меню восстановления может вызываться комбинациями Esc, F9, F11 или Fn + F8.
Как зайти в безопасный режим, если Windows не загружается
Даже если Windows 10 не запускается, безопасный режим остается доступным. Ниже — три способа входа на случай критических сбоев.
1. Прерывание загрузки системы
При появлении логотипа Windows нажмите и удерживайте кнопку питания, чтобы принудительно выключить устройство. Повторите это два–три раза. После нескольких попыток система откроет меню автоматического восстановления. Перейдите в раздел «Поиск и устранение неисправностей» → «Дополнительные параметры» → «Параметры загрузки», нажмите «Перезагрузить», а затем клавишу F4 для входа в безопасный режим.
Важно: частые принудительные отключения могут повлиять на работу SSD-диска, используйте этот способ только при необходимости.
2. Запуск среды восстановления Windows (WinRE)
Среда восстановления может открыться автоматически при сбое загрузки либо вручную — через зажатие Shift при перезагрузке, через параметры системы или после прерывания включения. В меню восстановления выберите «Устранение неполадок» → «Дополнительные параметры» → «Параметры загрузки» → «Перезагрузить», затем нажмите F4.
Обратите внимание: метод работает, только если ранее была создана точка восстановления. Ее можно настроить вручную или через автоматическое резервное копирование.
3. Использование установочной флешки с Windows
Подключите загрузочную флешку с образом Windows 10 и перезапустите устройство. В меню выберите язык, затем нажмите «Восстановление системы». В командной строке введите: bcdedit /set {default} safeboot minimal. После выполнения команды перезапустите компьютер — он загрузится в безопасном режиме.
После устранения неполадок вернитесь в командную строку или откройте msconfig и отключите параметр безопасного режима, чтобы Windows снова запускалась в обычном режиме.
Дополнительно можно проанализировать причину сбоя. Для этого откройте окно msconfig, перейдите на вкладку «Загрузка» и установите флажок «Журнал загрузки». После следующего запуска система создаст лог-файл с перечнем загруженных компонентов, что поможет определить источник ошибки.
Частые ошибки при входе в безопасный режим и как их исправить
При переходе в безопасный режим иногда возникают проблемы. Разберем самые распространенные неполадки и способы их устранения.
Нет интернета
По умолчанию безопасный режим загружается без сетевых драйверов. Чтобы получить доступ к интернету, при запуске выберите пункт «Безопасный режим с загрузкой сетевых драйверов» (клавиша F5).
Если интернет не появляется, выполните проверку.
-
Перейдите в диспетчер устройств и убедитесь, что сетевой адаптер активен и не помечен ошибкой.
-
При использовании Wi-Fi проверьте, работает ли служба автоматической настройки WLAN. Для этого нажмите Win + R, введите services.msc, найдите нужную службу и включите ее вручную.
-
Если беспроводное соединение неактивно, попробуйте подключиться к сети через кабель.
Система перезагружается или зависает
Если система уходит в перезагрузку или зависает, выполните следующие шаги.
-
Отключите все внешние устройства: флешки, принтеры, внешние диски.
-
Попробуйте использовать другой способ входа в безопасный режим — через командную строку или загрузочную флешку.
-
Если проблема сохраняется, запустите восстановление системы через среду восстановления Windows. Предварительно можно выполнить сканирование с помощью команды sfc /scannow — для проверки целостности системных файлов. Или DISM /Online /Cleanup-Image /RestoreHealth — это восстановление компонентов системы.
Не работает клавиатура или мышь
Если в безопасном режиме не реагируют клавиатура или мышь, вот что может помочь.
-
Подключите устройства напрямую, минуя USB-хабы или переходники.
-
Проверьте наличие ошибок в диспетчере устройств. Если на устройстве стоит значок ошибки, удалите драйвер и перезагрузите систему — Windows попытается установить его повторно.
-
Если используете беспроводную периферию, замените ее на проводную.
Не появляется меню с параметрами загрузки
-
Повторите перезагрузку, зажав клавишу Shift.
-
Если это не помогло, выполните вход через командную строку: bcdedit /set {default} safeboot minimal.
-
Как крайняя мера — прервите загрузку устройства 2—3 раза подряд, чтобы система открыла автоматическое восстановление.
Обратите внимание: принудительное отключение питания может повредить SSD. Если есть загрузочная флешка с операционной системой, лучше использовать ее.