Как выключить windows server 2012 — Ваш верный помощник с OS Windows

This tutorial will walk through a few ways to restart / shutdown Windows 2012 servers, we will also go through the charm and start options.

Windows Server 2012 uses a Start screen, Start is a window not a menu, programs can have tiles on the Start screen. Tapping or clicking a tile runs the program. When you press and hold or right click on a program an optional panel is displayed.

The charms bar is an optional panel for Start, Desktop and Server Settings, with a mouse and keyboard you can display the charms by moving the mouse pointer over the hidden button in the upper-right or lower-right corner of the Start, Desktop or Server Settings or by pressing the following keyboard combination Windows Key + C

One way to quickly open a program is by pressing the Windows Key and typing the program name, and then pressing Enter. This shortcut works as long as the Apps Search box is in focus which typically by default it is.

Pressing the Windows Key toggles between the Start screen and the desktop or if you are working with Server settings then between the Start screen and the Server Setting. You can also display the desktop by using the following keyboard shortcut Windows Key + D:

You can access Control Panel from Start, from your desktop by accessing charms, click on settings and click Control Panel additionally as Windows Explorer is pinned to the taskbar you can launch Windows Explorer and simply type Control Panel followed by Enter.

1. Shutdown & Restart using Power Settings Method

Display Start options by sliding in from the right side of the screen or moving the mouse pointer to the bottom right or upper right corner of the screen, click settings

Click Power

Select the appropriate action

2. Powershell Method

Launch an elevated windows powershell window

Type either (Restart-Computer) or (Stop-Computer) to restart or shutdown the server

Note: With Powershell to get help or examples for a cmdlet type (help restart-computer -examples) or (help stop-computer -examples)

3. Pressing the Physical Power Button

You can also press the server’s physical power button to initiate an orderly shutdown by logging off and then shutting down. Note this method does not restart a server once the server shuts down you would then have to press the power button to turn the server on.

There are other methods of restarting the server such as DOS, but the purpose of this tutorial is to list the 3 most common methods on restarting or shutting down a server.

If you found this article helpful please vote Yes below!

Источник

Methods for Windows Server 2012 Shutdown or Reboot

Since Microsoft removed the Start button, there is no quick way to shut down or reboot the server. Even the logon screen has no Shut down button.

Good news, here are three easy ways to down your Server 2012.

Windows Server 2012 Shutdown Methods

Use the Charms to Shutdown Windows Server 2012
Employ PowerShell to Shutdown Windows Server 2012
Employing Microsoft’s Shutdown Command

♦

Use the Charms to Shutdown Windows Server 2012

My favourite way of calling for the Windows charms is with WinKey +c. The main alternative to the keyboard shortcut is the mouse. There is a knack of pointing the mouse gently over the bottom right corner. There is no need to press any of the mouse’s buttons, just let the pointer activate the charms.

Using the mouse to make the charms emerge is a tricky skill. If at first you don’t succeed, try again but more slowly, circle the cursor nearer the corner of the screen.

Settings ‘Cogs’
Once the Server 2012 charms materialize on the right side of the screen, then click on the cogs called ‘Settings’. Now you seek the Power button, which is at the bottom of the screen.

Left click on ‘Power’ and select Shut Down (or Restart).

Try WinKey +i
An even quicker way to access these settings is to press the Windows Key +i.

Windows Server 2012 Shutdown Trap
If you Sign out (the old logoff) there is no shut down button on the front screen as there is with Windows 8.

Guy Recommends: A Free Trial of the Network Performance Monitor (NPM) v12

SolarWinds’ Network Performance Monitor will help you discover what’s happening on your network. This utility will also guide you through troubleshooting; the dashboard will indicate whether the root cause is a broken link, faulty equipment or resource overload.

Perhaps the NPM’s best feature is the way it suggests solutions to network problems. Its second best feature is the ability to monitor the health of individual VMware virtual machines. If you are interested in troubleshooting, and creating network maps, then I recommend that you give this Network Performance Monitor a try.

Download your free trial of SolarWinds Network Performance Monitor.

Employ PowerShell to Shutdown Windows Server 2012

If you are familiar with PowerShell’s cmdlets then you need a verb called ‘Stop’ (not shutdown), coupled with the noun ‘Computer’.

Launch PowerShell, type stop then tab, you should see Stop-Computer. If this flashy technique does not work, then just type this one simple command long-hand:

# PowerShell command to shutdown Windows Server 2012

Stop-Computer

Warning: Actually, there is no warning! If you issue the above command then Server 2012 initiates the shutdown procedure ‘ready or not’. For a more leisurely method of downing the server experiment with the built-in Shutdown command see the next section.

See more about using PowerShell’s Stop-Computer cmdlet.

Employing Microsoft’s Shutdown Command

For as long as I can remember Microsoft’s operating systems have a built-in shutdown utility. However, there is a little known switch to bring-up a GUI version of this command line utility.

# GUI method of using the built-in Shutdown command

Shutdown -i

Note: If you are going to use any of the Shutdown commands, the first switch to learn is -a. Shutdown -a meaning abort!

Pure Shutdown
I like to operate shutdown from within PowerShell. To digress you can run almost all the build-in cmd commands at the PowerShell interface.

# Shutdown the local Windows Server 2012 machine

Shutdown -s -m \\localhost

Note: When testing this command you have 60 seconds to abort with Shutdown -a

Note: Use of \\ localhost for the present computer may give you ideas for downing Windows Server 2012 remotely.

How to Reboot Windows Server 2012

As you may have guessed, restarting Server 2012 is conceptually the same as shutting down. If you would like PowerShell to reboot the server then in place of ‘Stop’ use the verb ‘Restart’.

For occasions where you employ the shutdown command, then instead of typing -s, substitute -r.

# How to Reboot Server 2012 with PowerShell
Restart-Computer

# How to Reboot with the built-in command
Shutdown -r -m \\localhost

How to Create a Shutdown Tile For Server 2012

My plan is to create a Shutdown button in the Windows Server 2012 Metro interface. This is not an easy task, it helps if you understand the three underpinning concepts, and pay particular attention to detail.

Avoid over-think, go straight for the command.:
C:\windows\system32\shutdown -s -t 25
[My point is don’t mess with wrapping instruction in cmd files]
Find a particular location where you store all the shortcuts to all the tiles:
C:\ProgramData\Microsoft\Windows\Start Menu\Programs
Note: Start at ProgramData not ProgramFiles.
Realize that you can Pin (and Unpin) tiles to the Metro UI.

Instructions for Creating a Windows Server Shutdown Tile

Navigate with Windows Explorer to this special folder:
C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
Note: This works for a user called ‘Administrator’, therefore amend your setting as required.
Create a shortcut. Right-click a blank area, from the menu select: New, Shortcut. Paste this instruction:
C:\windows\system32\shutdown -s -t 25
Note: t means time in seconds. You need a space between t and 25.
Give the shortcut a meaningful name, I chose Guy’s Shutdown so that I could find it. I like to click on the shortcut’s advanced button and ‘Run as administrator’.
You should see your shortcut amongst the other Apps, especially if you gave it a distinctive name.
Press the Windows Key to return to the Metro UI.
New tiles are always ‘born’ at the right of the Metro screen, so you may need to scroll to find your short’s tile.
Right-click its icon and check ‘Pinned’ I also like to Pin my Shutdown shortcut to the Task Manager. See more on how to create a Windows Metro Tile.

Windows Shutdown Tile Variations:
Change your shortcut’s icon. Right-click, Properties, Change Icon. There is a classic orange square with a vertical line. See screenshot above.

Tweak the Shutdown command, at least while your testing you may wish to change /t 25 to /t 10. The benefit is you can go to the command prompt (or PowerPoint) and issue the countermand: Shutdown -a. This aborts the shutdown.

Challenge: Make a second tile but with the Shutdown -a command. See screenshot above.

Guy Recommends: The Free IP Address Tracker (IPAT)

Calculating IP Address ranges is a black art, which many network managers solve by creating custom Excel spreadsheets. IPAT cracks this problem of allocating IP addresses in networks in two ways:

For Mr Organized there is a nifty subnet calculator, you enter the network address and the subnet mask, then IPAT works out the usable addresses and their ranges. For Mr Lazy IPAT discovers and then displays the IP addresses of existing computers.

Download the Free IP Address Tracker

Summary of Disable UAC in Windows Server 2012

Four

If you like this page then please share it with your friends

Microsoft Windows 8 Topics

• Windows 8 Overview • Windows 8 Event Viewer • Win 8 Security Event Log • Log Event Manager

• Win 8 Task Manager • Close Windows 8 Apps • Windows 8 SkipRearm • Windows 8 File History

• Windows 8 App Store • Windows 8 Safely Remove Hardware • Windows 8 Shutdown Command

Источник

Do you know how to shutdown Windows Server 2012? This is one of the most commonly faced issues by the users of the Windows Server 2012 since the release of this server operating system. It should have been the easiest thing to perform. But, Microsoft made no efforts to include any straightforward method of shutting down the server.

But don’t worry about that as we have compiled a list of various ways you can shut down the Windows Server 2012. And, we will share all of these, one by one in this very post. On top of this, the tutorials will be described in step by step and with screenshots. So, you can follow along with ease.

Let’s begin then, shall we?…

Tutorials on How to Shutdown Windows Server 2012

There are several methods to shutdown Windows Server 2012. In this section, we will be explaining one at a time. So, let’s go…

Method #1 Shutdown Windows Server 2012 Using the ‘WINDOWS+I’ Shortcut

Press the ‘Windows Key’ and the ‘I’ key on your keyboard at the same time
Now, you will see a new settings menu has appeared on the right side of the window
There will be a ‘Power’ button on the bottom of all the settings, click on that ‘Power’ button

It will bring out 2 options that are ‘Shut down’ and ‘Restart’. As we will turn off the system, click on the ‘Shut down’ option from there

In doing so, a new dropdown menu will appear. Here, you will be asked to choose the reason for shutting down the system

Now, click on the dropdown menu and select the reason you prefer from the long lists

After that, click on the ‘Continue’ button and it will shut down the system shortly

Method #2 Shutdown Windows Server 2012 Using the CTRL+ALT+DELETE Shortcut

First, press the ‘CTRL+ALT+DELETE’ keys on the keyboard at once
It will bring out several options like ‘Lock, Switch user, Sign out, Task Manager, etc.’ on the screen
Now, look at the bottom right corner of the screen where you will find a ‘Power’ button/icon. You have to click on that ‘Power’ icon

In doing so, 2 new options will appear named ‘Shut down’ and ‘Restart’. Next, click on the ‘Shut down’ option from there

As usual, you will be asked about the reason for shutting down the system. Just select the appropriate reason from the dropdown menu and click on the ‘Continue’ button

In a moment, your Windows Server 2012 will shut down

Method #3 Shutdown Windows Server 2012 Using the ALT+F4 Shortcut

At first, press the ‘ALT+F4’ keys simultaneously from your keyboard. But remember to close all the other apps or files before doing that. Or else, at least click on the ‘Desktop’ window so the focus is on the desktop
It will bring out the shutdown dropdown menu on any Windows operating system
Typically, there will be a dropdown menu where you will find 4 options like ‘Disconnect, Shut down, Sign out, and Restart, etc.’

So, click on the dropdown menu and select the ‘Shut down’ option from there. And click on the ‘OK’ button to shut down your system properly

Related: How to Configure NTP Server in Windows 2012 r2

Method #4 Shutdown Windows Server 2012 Using Command Prompt

In this particular method, you will have to use the ‘Command Prompt’ or ‘CMD’ to shut down your Windows Server 2012. Here’s how to perform this method…

At first, press the ‘Windows Key’ and the ‘R’ key at the same time on your keyboard
It will bring out the ‘Run’ So, type in ‘cmd’ on the Run box next to the word ‘Open’ and hit the ‘OK’ option

It will bring out the CMD window on the screen
Now, type in ‘shutdown -s’ (without the ‘’ marks) on the command prompt window and hit the ‘Enter’ key on the keyboard
And, your Windows Server 2012 will shut down in a bit

There are a few other commands related to the shutdown and power option of Windows. You can get the full list by following these steps down below…

Once you have opened the ‘CMD’ window, type in ‘shutdown /?’ on the CMD window and press the ‘Enter’ button on your keyboard

In doing so, you will find all the list of the shutdown commands in the CMD window

Here are some of the main commands for your convenience…

To reboot or restart, you have to type: ‘shutdown –r’
To initialize force reboot or restart, you have to type: ‘shutdown -f -r’
To initialize immediate force reboot or restart, you have to type: ‘shutdown -f -r -t 00’

After typing every command you have to press the ‘Enter’ key on your keyboard. Also, try to type these commands manually, as directly copying and pasting from the web can lead to some formatting issues.

Method #5 Shutdown Windows Server 2012 Using the ‘Windows+C’ Shortcut

This is a Windows build specific method. So, depending on your version of Windows Server OS’s build number, it might not work. Still, you can give it a try…

First of all, press the ‘Windows Key’ and the ‘C’ key on your keyboard at the same time
Now, it will bring out the ‘Charms’ menu on the left or right side of the screen
From the ‘Charms’ menu, click on the ‘Settings’ option which will look like a ‘Gear’ icon
Next, click on the ‘Power’ option from the settings list

It will bring out a few options like ‘Shut down, Restart, and Sleep, etc.’
You have to click on the ‘Shut down’ button from there and your system will shut down in a moment

Method #6 Shutdown Windows Server 2012 Using the Run Utility

First off, press the ‘Windows Key’ and ‘R’ keys on the keyboard at the same time
Next, the Run box will appear. Now, type in ‘shutdown -s -f -t 00’ (without the quotes) command on the run box and click on the ‘OK’ button

It will shut down the Windows Server 2012 shortly

Now, if you are not into typing the command every time you need to shut down your server, there is an easier way out for you. Here it is…

Launch the ‘Notepad’ or a new ‘Text Document’ program on your Windows Server 2012
Now, type in this ‘c:\windows\system32\shutdown -s -f -t 00’ (without the ‘’ marks) on the notepad

Next, click on the ‘File’ option from the top menu bar and click on the ‘Save as’ option

Now, you have to save the file as a ‘.bat’ To do that, you have to type in ‘.bat’ as the file extension instead of ‘txt’

Lastly, click on the ‘Save’ button from the bottom to save the file as a ‘.bat’ You can also rename the file to something like ‘shutdown.bat’ to recognize it later easily

Now, every time you need to shut down your server, you need to just double click on the new ‘.bat’ file you have just created. For instance, in our case, we will be able to shut down the Windows Server 2012 by double-clicking on the ‘Shut Down.bat’ file from our desktop

Method #7 For the Windows Server 2012 Beta Users:

If you are using the Demo version of the Windows Server 2012, then you can follow this next method. As the demo version of the Windows Server 2012 came with a Windows button, we will take advantage of that

First, click on the ‘Windows’/’Start’ button from the bottom left corner of the screen
It will bring out the ‘Start’ menu options. However, there will be no ‘Power’ options there
So, take the mouse cursor all the way to the upper right corner of the screen. In doing so, you will see a new sidebar is showing up
On that sidebar, click on the ‘Settings’/‘Gear’ icon from there
Next, click on the ‘Power’ icon from the settings list
It will show the ‘Shut down’ and ‘Restart’ Just click on the ‘Shut down’ option from there

Next, it will ask you about the reasons for the shutdown. So, choose the one that best describes the situation
And, finally, click on the ‘Continue’ button to finalize the process

Method #8 For Windows Server 2012 R2 Users:

If you are using the Windows Server 2012 R2, you might have access to the ‘Windows’ or ‘Start’ button. If that is the case for you, you can try this method. Let’s see how to do that…

First off, take your mouse cursor to the upper right corner (all the way to the corner) of the desktop window. You will find an icon like ‘…’/‘3 dots’ Now, you have to click on that icon
You can also click on the ‘Start’ icon from the bottom left corner of the screen to bring out the ‘Metro’ interface and then take your mouse to the topmost upper right corner of the screen. And then click on the ‘3 dots’ icon
It will bring out the settings menu. Now, click on the ‘Settings’/‘Gear’ icon from that menu
From the settings menu, click on the ‘Power’ icon

Next, click on the ‘Shut down’ menu from the power options

And, select the reason for the shutdown and click on ‘Continue’ to shut down your server properly

So, we have shared 8 different methods of shutting down Windows Server 2012. All of these methods are explained in a step by step manner. So, you can try them out without facing any difficulties. Microsoft could make the process easier by including the standard ‘Start’ button, ‘Power’ options, or the ‘Shut down’ button in the Windows Server 2012.

But unfortunately, they did not and now we the users have to go through a lot of hassles to do one of the most common tasks of shutting down a system. We hope this post has helped you to learn how to shutdown Windows Server 2012 properly.

So, what is your experience using the Windows Server 2012? You can share your opinions in the comments section down below!

Источник

В редакции Windows Server 2016, а особенно 2012 R2, есть некоторые особенности интерфейса, в связи с которыми необходимость простой перезагрузки сервера может вызвать сложности.

Например, для перезагрузки Windows 2012 Server R2 необходимо на наших серверах, нажать кнопку ПУСК и выбрать пункт НАЧАЛЬНЫЙ ЭКРАН

после этого появится экран справа наверху, которого будет кнопка, с пиктограммой ВКЛ\ВЫКЛ, нажав на которую, вы увидите варианты: Завершение работы, Перезагрузка.

Что бы вернуться, нажмите на плитку Рабочий стол.

Завершение работы и перезагрузка Windows Server 2016

На серверах арендованных в нашей компани, для перезагрузки или завершения работы Вам необходимо также, сначала вызвать меню ПУСК, и выбрать в самом верху пункт «Меню Пуск (Windows)».

После появления стандартного плиточного меню ПУСК, в нижнем левом углу вы увидите кнопку с пиктограммой ВКЛ\ВЫКЛ, нажав которую, вы также увидите варианты действия нужного для перезагрузки или завершения работы сервера.

Посмотреть цены на сервера для 1С:

ознакомьтесь также с нашими ценами на выгодные тарифы по аренде сервера 1С, к которым в том числе можно подключаться и с ноутбуков или компьютеров с операционной системой Mac OS

БЕСПЛАТНЫЙ ТЕСТОВЫЙ ДОСТУП НА 5 ДНЕЙ

Тариф S-4

Процессор 2 потоковых ядра Intel
плюс много места под базы 1C SQL

Лицензии Windows и Office включены

3 800 рублей в месяц

Оптимальная нагрузка одновременная работа
4-5 пользователей

Источник

Windows Server in its different versions give us a range of useful options for the management and delivery of roles and services not only to the server itself but also to the client computers of the domain, hence the importance of always preserving the availability and security of this..

For administrative or support reasons, at specific times it will be necessary to shut down or restart the server for a period of time. This should only be carried out with specific orders and knowing in advance that all users are aware of this task, since otherwise we can cause failures in certain activities or prevent communication and access to shared resources.

It is well known by each of us who have or are working in Windows Server that the shutdown and restart process is usually carried out through the Start menu and by clicking on the shutdown button:

But if in TechnoWikis we tell you that this process can be done through the command line , would you do it? We already told you that managing the shutdown or restart of Windows Server can be done through commands and it is quite simple. Therefore TechnoWikis will explain some commands to perform this task and this process applies in Windows Server 2012, 2016 or 2019 equally..

To stay up to date, remember to subscribe to our YouTube channel! SUBSCRIBE

1. Shut down or restart Windows Server 2019, 2016, 2012 with Shutdown command

To use the command line, a general command called «shutdown» will be implemented, which has been integrated in all editions of Windows. Its elementary function is to turn off or restart the local or remote computer, to be taken into account, when we use this command without any parameter the device will shut down or restart immediately.
The general syntax of this command is the following:

 shutdown [{-l | -s | -r | -a}] [-f] [-m [\\ device]] [-t xx] [-c "message"] [-d [u] [p] : xx: yy]

Parameters commando Shutdown

The parameters used are the following:

-l: this parameter closes the session of the current user.

-s: turn off the local server.

-r: this command will be used to restart the computer after its shutdown.

-a: it is a command with which the closing order is deleted, you can omit other parameters, minus -ly ComputerName.

-f: this parameter forces to execute applications to proceed with the closing.

-m [\\ ComputerName]: with this value we can indicate the equipment that has to be turned off.

-t xx: thanks to this value we can define the timer for the shutdown of the system in xx seconds, by default its value is 20 seconds.

-c «message»: with this parameter we can integrate a message which will be displayed in the message area of â€‹â€‹the server’s shutdown window indicating that the computer has to be shut down or restarted, we can enter up to 127 characters.

d [u] [p]: xx: yy: this is a parameter with which the code is indicated for closing, the options are u (indicates a user code), p (indicates a planned shutdown code), xx (indicates the main code (0-255)), and y (allows you to specify the secondary reason code (0-65536)).

2. Restart Windows Server 2019, 2016, 2012 with Shutdown command

Knowing the use of the shutdown command, we will see how to restart our Windows Server from the terminal.

Step 1

For an immediate restart we will execute the following. Pressing Enter will restart the system automatically.

 shutdown / r / t 0

Step 2

We can enter the period of time in seconds in which the system will be restarted, for example, if we want it to restart in 1 minute we will enter the following:

 shutdown / r / t 60

Step 2

The following pop-up window will automatically be displayed:

Step 3

There is indicated the time that we have defined, so, after one minute the system will be restarted:

Step 4

Now, in case of having active applications and we want to force their closing, we must execute the following:

 shutdown / r / f

Step 5

In the same way, if we manage networked equipment, we can restart them remotely using the following syntax:

 shutdown / r / f / m \\ EQUIPMENT

Step 6

If we want to customize the restart, we can enter a message using the -c parameter like this:

 shutdown / r / t 45 -c "TechnoWikis Restart"

Step 7

As a result we will see the following:

3. Shut down Windows Server 2019, 2016, 2012 with Shutdown command

We have seen how easy it is to restart Windows Server using the command line, now, this process is similar for shutdown.

Step 1

To shut down Windows Server immediately we will execute the following:

 shutdown / s / t 0

Step 2

To program the shutdown we execute:

 shutdown / s / t 15

Step 3

We will see the following. There we can see a message where it says that Windows Server will close in less than a minute.

Step 4

As with the previous commands, we can force the closure of applications using:

 shutdown / s / f

Step 5

To turn off a remote device we will use:

 shutdown / s / f / m \\ EQUIPMENT

Step 6

Finally, to add a shutdown message we execute:

 shutdown / s / t 30 -c "Shutdown TechnoWikis"

Step 7

Using one of the above commands the result will be as follows:

Thus, we already have one more solution for shutting down or restarting our Windows Server in a simple way using the shutdown command and its parameters.

Источник