Общие сведения:
Эта статья — пошаговая инструкция по установке драйвера USB-UART преобразователя на чипе от FTDI для операционной системы Window 7.
Внимание! Для установки драйверов необходимы права администатора. Зайдите от имени пользователя с правами администратора или попросите администатора компьютера дать повышенные права аккаунту, от имени которого будет производиться установка драйвера.
Драйвер — исполняемая программа-модуль, предоставляющая интерфейсы высокого уровня для управления устройствами на низком уровне.
Шаг 1. Подключение устройства.
После подключения устройства с FTDI преобразователем появится сообщение об установке драйвера.
Через некоторое время появится сообщение о том, что драйвер не был успешно установлен. Если данное сообщение не появилось, скорее всего драйвер уже установлен, перейдите к шагу 5 и проверьте присутствие драйвера.
Шаг 2. Диспетчер устройств.
В меню Пуск (Кнопка с четырёхцветным логотипом Windows в левом нижнем углу экрана) нажмите правой клавишей мыши на «Компьютер», далее нажмите «Свойства».
Во вновь открывшемся окне нажмите «Диспетчер устройств».
Откроется новое окно, в нём должен быт пункт «Другие устройства -> FT232R USB UART» с пиктограммой в виде жёлтого треугольника с восклицательным знаком.
Шаг 3. Скачивание драйвера.
Кликните по ссылке ftdichip.com и проскрольте вниз до таблицы. В ней кликнете на «setup executable» как на рисунке. Начнётся скачивание драйвера. Или скачайте драйвер с нашего сайта, в случае, если сайт производителя по каким-либо причинам не работает.
После того как файл скачался, откройте его (можно прямо в браузере нажать на .zip файл).
Шаг 4. Установка драйвера.
Откроется окно с исполняемым файлом. Кликните на него мышью двойным щелчком.
Нажмите «Да».
Откроется окно распаковщика, нажмите «Extract».
После распаковки будет открыт мастер установки драйвера. Нажмите «Далее».
Внимательно прочитайте лицензионное соглашение и кликните на фразу «Я принимаю это соглашение», если Вы с ним согласны.
Нажмите далее.
Начнётся процесс установки.
После завершения установки нажмите «Готово».
Шаг 5. Проверка.
После установки драйвера откройте Arduino IDE и убедитесь, что появился новый виртуальный COM-порт.
Вконтакте
Одноклассники
Telegram
⌚ 31.01.2025
Характеристики
Windows 10, Windows 8/Vista, Windows 7/XP (32/64-бита)
Проверить совместимость
Ход выполнения
0%
Результат проверки:
Полная совместимость
Cкачать
Нажмите на ссылку и ждите 3 сек.
(разрешите всплывающие окна в браузере.
Что это?)
Проголосовало: 86 чел. Спасибо! Ваш голос принят.
Скачать
Нажмите на ссылку и ждите 3 сек.
Описание и инструкции
WHQL драйвер для FT232R USB UART от FTDI.
Доступны отдельно версии: 2.12.28 и 2.12.04.
Размер файлов: 3.87 Мб. и 1.94 Мб.
В редких случаях установку программного обеспечения необходимо производить вручную, например, через Диспетчер устройств (указав расположение разархивированных файлов).
Вконтакте
Одноклассники
Telegram
Видеоматериалы по теме
Обновить ПО
с помощью
Driver Installer
Все программное обеспечение, размещённое на GetDrivers.net, является бесплатным. Все названия и торговые марки являются собственностью соответствующих обладателей.
Firstly the FT232R USB UART driver is a bit of a complicated install. The usb\vid_0403&pid_6001&rev_0600 is also explained below. Secondly the screenshots below will give you direction with regards to installing the driver the correct way. This means that you first have to uninstall the driver, disconnect from the internet and then install the driver again. Finally the FT232R USB drivers below need to be extracted to an area on your computer you can find.
No doubt, the driver ID below corresponds to the Gigabyte – M68SM-S2L UART. However, this also matches the FT232R USB UART hardware. Likewise they will use the same driver as the internals are the same. This even though they have different names on the devices. These devices use the same FTDI chipsets, which are quite common. In addition you will note that they use the very same hardware ID. This remains consistent even when the brand name differs. Follow these steps to install the driver:
Device Name: FT232R USB UART
Hardware ID:
Broadcom Bluetooth 3.0 USB
USB\VID_0403&PID_6001
Future Technology Devices International (FTDI) USB High Speed Serial Converter
USB\VID_0403&PID_6001
Future Technology Devices International (FTDI) USB Serial Converter
USB\VID_0403&PID_6001
Future Technology Devices International (FTDI) USB Serial Converter Multi-Function Cable
USB\VID_0403&PID_6001
Schneider USB Serial Converter Multi-Function Cable
USB\VID_0403&PID_6001
Telemecanique USB Serial Converter Multi-Function Cable
USB\VID_0403&PID_6001
Varos FT4000 USB Serial Converter
USB\VID_0403&PID_6001
See also more hardware ID listed below:
USB\VID_0403&PID_6001&REV_0600 / USB\VID_0403&PID_6001
Compatible ID: USB\CLASS_FF&SUBCLASS_FF&PROT_FF
Siemens USB Bulk Transfer
USB\CLASS_FF / USB\CLASS_FF&SUBCLASS_FF
USB\VID_0403&PID_6001&REV_0600
If you are looking for hardware for your device. One that matches the hardware ID USB\VID_0403&PID_6001&REV_0600. Then you will know that this is for the older FT232R chip. Likewise the hardware ID USB\VID_0403&PID_6001&REV_0600 is all for the 2014 VCP driver for the chipset. You will need to check if this is for Windows 10 as it might be used in the Windows XP driver.
For Windows 10 users, you need the FT232R USB UART driver for either 64-bit or 32-bit systems. Both options are available in the latest drivers. Additionally, there’s a specific FT232R USB UART driver for Windows 11, released in December 2021. This version is designed for Windows 11, while the last two downloads are suitable for Windows 10 operating systems.
See also :
- ft232r usb uart treiber
- pilote ft232r usb uart
- controlador ft232r usb uart
- usb\vid_0403&pid_6001&rev_0600
These are the same descriptions where some call it a controller while others call it a UART. There is one final note and that is that there are many white box devices that use this same driver. The Moyina USB console cable driver also uses this driver. Even though the Moyina uses a FT232RL chipset. These drivers will work on it as well. The FT232rl driver will work with this driver which many have used in USB port cables and convertors.
Driver Files
Download the driver file and extract it to your hard driver where you can find it.
***2021 was the last driver release.***
2014 VCP driver – 32bit/64bit Windows (No longer supported)
Windows Server 2008 R2, Windows 7, Server 2008, Server 2003, Vista, XP
FT232R USB UART Driver Download
2021 VCP driver – 32bit/64bit Windows
Windows CE 4.2-5.2: Windows Mobile 2003, Mobile 2003 SE, Mobile, Mobile 6, Mobile 6.1 ,Mobile 6.5, Windows 7, Windows 8, Windows 8.1, Windows 10, ; Server 2008 R2, Server 2012 R2 and Server 2016
FT232R USB UART Driver Download
2021 VCP driver – 32bit/64bit Windows
Windows 10 and Windows 11 only.
FT232R USB UART Driver Download
2021 D2XX Direct Drivers
Windows (Desktop) 2021-07-15
FT232RDriver 2.12.36.4 X86 (64-Bit)
FT232R Driver 2.12.36.4 X86 (32-Bit)
Windows RT Driver (ARM) (2014-07-04)
Linux X64 (64-Bit) / X86 (32-Bit) (2020-05-18)
2023 Dell USB Serial driver – 32bit/64bit Windows (Version: 2.14.1.8)
FTDI USB Serial Port device. Note that this will only install on a Windows 11 system. Release date – 10 May 2023
FT232R UART Driver Download
Step 2:
In brief you first need to uninstall the incorrect drivers on your computer. In Windows, go to Control Panel then to Device Manager
Given these points now press the delete button on your computer and it will ask for confirmation.
In any case collapse the Ports menu and now click on the USB controller at the bottom of the list.
Be that as it may you now need to uninstall the existing USB Serial Convertor.
Disconnect the USB cable from your PC to KMX1 or KMX2
reconnect the USB cable from your PC to KMX1 or KMX2
A new yellow flagged item will appear FT232R USB UART
Right Click on FT232R USB UART
Select Update Driver Software
Now you need to find where you extracted the drivers from the file you downloaded above and point the software to the directory.
For one thing, the driver software for USB Serial Converter has been installed
The USB Serial Convertor is now installed. Next you have to install the port. If you are old enough to remember software modems then you will recall that it was done in the same manner.
Another key point the yellow flagged item will have changed name to USB Serial Port
Right Click on USB Serial Port
Select Update Driver Software
Given that the driver software for the Port is in the same directory where you had the other drivers which you had just installed.
All in all the Serial Port will now install and that will be the final installation. There should be no yellow flags any more.
Done!
Above all see the updated version and UART driver here. See also the Realtek USB 3.0 Card Reader Driver Win 10 and the Nexus 5 USB Driver.
Incoming Search Terms:
- ft232r usb uart driver
- FT232R USB UART
- FT232R DRIVER
- ft232r usb uart driver windows 7
- driver FT232R USB UART
Related Posts
- BlueSoleil Bluetooth Driver (1.000)
- Accton EW3301 Driver (1.000)
- ASUS WL-161 USB Pen Driver (1.000)
- Samsung USB device not recognized (1.000)
- USB to RS232 Driver (1.000)
FT232R is a USB to UART chip device designed by FTDI. Even though these ports are now deprecated on most modern laptops, if your computer has them, you can use this chip to upgrade them to USB. You can also use this chip as a USB to UART adapter if you need to connect devices using these interfaces to your PC. So to use the chip properly and effectively, it is essential to install the latest FT232R USB UART driver.
In this post, you can follow three available and useful methods to update your FT232R USB UART driver to the latest version.
# Method 1: Update FT232R USB UART Driver in Device Manager
When you look at some device information in Device Manager, you may see a device listed as an unknown device next to a yellow question mark. It may be difficult to pinpoint the cause of this unknown device, as there is little indication of what it was created from.
Step 1: Right-click the Start icon and click Device Manager to open the Device Manager panel.
Step 2: Click the arrow next to Ports (COM & LPT) or sometimes it shows below Other Devices.
Step 3: Right-click on FT232R USB UART and select Update Driver.
Step 4: Choose Search automatically for drivers.
Therefore, you will find that not all driver devices can be updated by the Device Manager because some driver devices are not detected by it. So you have to look at the next automatic method to detect and update those drivers that the device manager can’t detect.
# Method 2: Update FT232R USB UART Driver in an automatic way (Recommended)
Driver Booster is the most convenient way to quickly find corrupted and outdated drivers and find accurate and up-to-date matches for systems and devices. And you don’t have to worry about security either, as the driver database supports over 6.5 million devices and drivers from over 1200 major brands.
In addition, the driver sources are all official from the original hardware manufacturer and have passed the Microsoft WHQL test and IObit test.
Now you can update FT232R USB UART Driver via Driver Booster with relief.
Step 1: Download, install and run Driver Booster on Windows 11 or Windows 10.
Step 2: Click the icon Scan.
And this software will detect all the drivers on your PC including those that can not be detected by Device Manager. After detection, you can check how many outdated and missing drivers are on your PC.
Step 3: Find out FT232R USB UART Driver and click the icon Update next to the driver.
Of course, good driver software is more than just updating drivers. Driver booster also provides free built-in tools to fix some common Windows problems once and for all, such as sound, video, graphics, and Wi-Fi connection issues, and speed up browsing and downloading for smoother system performance.
# Method 3: Update FT232R USB UART Driver on the official site
Of course, this is your last resort if you resist any third-party program and the driver you want to update isn’t detected by Device Manager. You can only download and update the latest version of FT232R USB UART Driver through the official platform. The following are the detailed steps.
Step 1: Go to the FTDI driver download center.
Step 2: Download the FTDI CDM driver. The Windows driver installer contains both VCP and D2XX drivers.
Step 3: After downloading, unzip the file and install it on your PC.
Step 4: Restart your PC.
# How to download FTDI drivers for Mac
Step 1: Go to the FTDI Chip drivers page.
Step 2: Scroll down to find the download files. Find the link that suits your computer operating system.
Step 3: You should download these two packages for installing FTDI drivers on your Mac (download the latest version).
Step 4: After downloading, unzip the two folders and install them following the instruction.
FAQ about FT232R USB UART Driver:
Q1: What is the FT232R USB UART driver?
The FT232R is the latest product to FTDI’s USB UART interface IC devices. The FT232R is a USB-to-serial UART interface with optional clock generator output and new FTDIChip-ID™ security dongle functionality.
Q2: Is UART better than USB?
It depends on yourself.
The UART device was created to be compatible with communication. However, USB has almost completely replaced these outdated cables and connectors that used UART communication. Besides, USB is faster than UART.
Usually, UART speeds are up to around 1Mbps, but again USB 2.0 is asynchronous, but the specs say it can transfer up to 480Mbps.
Q3: Can I run the FT232R USB UART driver on Mac OS 8?
Yes. FT232R USB UART driver supports Mac OS 8/9, OS-X. Besides, it also supports almost all windows versions, Linux, and Android. If you want to know more information about its system requirements, you can click here.
Q4: Do I have to install the latest drivers for the FT232R?
No. Only some new features (such as EEPROM programming in the D2XX driver) may require the latest driver. So unless you want to try new features or there is a problem with the FT232R USB, you can choose not to update it.
Q5: Does the FT232R contain the MPSSE from the FT2232C device?
No. For applications requiring the MPSSE (e.g. USB-JTAG, USB-I2C, USB-SPI, etc.), the FT2232C is currently the only device available.
Q6: Is the FT232R replacing previous generations of FTDI’s ICs?
No. Although the new FT232R chips are recommended for new designs, there are currently no plans to stop producing the two previous generations.
More Articles:
MTK (MediaTek) VCOM USB Drivers Error on Windows 10
Download Apple Mobile Device USB Drivers
Download Samsung USB Drivers for Windows 10, 8, 7
FT232R USB to Serial Cable Driver Information and Installation Guide
The FT232R USB to Serial cable (CSI Part# 17394 — Black Cable) is a widely used adapter that facilitates communication between a computer’s USB port and serial devices. This is particularly useful for connecting to legacy hardware or various electronics that utilize serial communication protocols. To ensure optimal functionality, it is important to install the appropriate drivers. This driver supports Windows XP, Vista, 7, 8, and 10, for both 32-bit and 64-bit versions of these operating systems.
Key Considerations for FT232R USB to Serial Cable Drivers
Compatibility and Support
This driver is compatible with a range of Windows operating systems, ensuring that your FT232R USB to Serial cable will work seamlessly regardless of the version you are using. Supported operating systems include:
- Windows XP (32-bit and 64-bit)
- Windows Vista (32-bit and 64-bit)
- Windows 7 (32-bit and 64-bit)
- Windows 8 (32-bit and 64-bit)
- Windows 10 (32-bit and 64-bit)
- Windows 11 x64 (64-bit)
Important Warning About FTDI Drivers
FTDI (Future Technology Devices International) manufactures the chipsets used in these USB to Serial cables. It is crucial to be aware of the potential risks associated with using FTDI drivers on non-genuine FTDI devices.
Risks of Using FTDI Drivers on Non-Genuine Devices
In the past, FTDI implemented measures that caused issues with counterfeit devices. Specifically, non-genuine FTDI chips were bricked by driver updates, which reset the device ID to 0000, rendering the device non-functional. Although FTDI has since resolved this specific issue, they have continued to implement safeguards and warnings to prevent the use of counterfeit devices. Users should heed these warnings to avoid potential problems.
Note: Always ensure that you are using genuine FTDI devices to avoid compatibility and functionality issues.
Installation Guide for FT232R USB to Serial Cable Driver
Steps to Download and Install the Driver
- Download the Driver:
- Visit the official website or trusted source where the FT232R USB to Serial cable drivers are hosted.
- Select the appropriate driver version based on your operating system and its architecture (32-bit or 64-bit).
- Install the Driver:
- Once downloaded, locate the driver file and double-click to initiate the installation process.
- Follow the on-screen instructions to complete the installation. This typically involves agreeing to the license terms and selecting the installation directory.
- Connect the Cable:
- After the driver is installed, connect the FT232R USB to Serial cable to an available USB port on your computer.
- Verify Installation:
- Open the Device Manager in Windows (you can search for it in the Start menu).
- Under the «Ports (COM & LPT)» section, you should see a new entry labeled «USB Serial Port.»
Post-Installation
Once the driver is installed and the device is recognized as «USB Serial Port» in Device Manager, you can proceed to use the cable for your intended serial communication tasks. This label indicates that the driver installation was successful and the device is ready for use.
Troubleshooting Tips
If you encounter any issues during the installation or use of the FT232R USB to Serial cable, consider the following troubleshooting steps:
- Check Device Manager:
- Ensure that the device is listed under «Ports (COM & LPT)» as «USB Serial Port.»
- If the device is not listed, try unplugging and replugging the cable or using a different USB port.
- Driver Reinstallation:
- If the device is not functioning correctly, try uninstalling the driver from Device Manager and then reinstalling it.
- Update Drivers:
- Ensure that you have the latest version of the driver. Visit the official FTDI website or the trusted source where you downloaded the driver to check for updates.
- Genuine Devices:
- Verify that you are using a genuine FTDI device. Using counterfeit devices can lead to compatibility issues and potential bricking of the device.
- Contact Support:
- If problems persist, consider reaching out to customer support or consulting online forums for additional help.
By following these guidelines and installing the correct drivers, you can ensure that your FT232R USB to Serial cable operates effectively, providing reliable serial communication for your projects and applications.