Focusrite saffire pro 40 driver windows 10 — Ваш верный помощник с OS Windows

Software

Windows

Saffire Mix Control 3.7 — Windows

Release notes

Includes a fix for Saffire interfaces that would not retain their Sync Source in standalone mode.
Includes a fix for OS X users seeing the «No Hardware Connected» message and experiencing disconnects on account of there being two drivers installed (after the 3.5/3.6 upgrade).
Includes a fix to keep Saffire Mix Control running after new firmware is deployed to the Saffire interface.

Saffire Mix Control 3.4 — Windows

Release notes

This installer includes all necessary drivers and software to run the firewire Saffire range of Focusrite interfaces.

Fixed issue that might cause glitches using Quicktime on OS X Mavericks
Fixed issue that might cause distortion on second ADAT port and loopback using Liquid Saffire 56
Improved sample rate switching

Tested with:

Mac OS 10.8
Mac OS 10.9
Windows 7
Windows 8

Please note: this version of Saffire MixControl is no longer supported. For the latest supported version please see the latest release version on this page.

Saffire Mix Control 2.4 — Windows

Release notes

Driver updated to 3.5.6 release
Adds support for Mac OS 10.7 (Lion)
Improves performance with Pro Tools 9 (Mac and PC)
Fixed snapshot load/save functions (Mac)
Fixed crash on non-admin accounts (Mac)

Windows Users: This release requires the use of the Windows Legacy FireWire driver on Windows 7 64-bit. Windows 7 32-bit users should however use the default Windows 7 FireWire driver.

Mac

Saffire Mix Control 3.9 — Mac

Release notes

This will be the last software release for the Saffire range as they are now discontinued, please see this article from our Help Centre.

Tested on:

macOS 10.15 (Catalina)
macOS 10.14 (Mojave)
macOS 10.13 (High Sierra)
macOS 10.12 (Sierra)

macOS 10.12 or later is required to run Saffire Mix Control 3.9. This version will not install on macOS 10.11 or earlier.

What’s New

Saffire Mix Control is now a 64-bit application
Updates Saffire Pro40 firmware to either r2761 or r742 depending on hardware revision. Fixes no audio from second Pro40 sync slave on dual unit mode (also available in previous 3.8b1 beta)
Updates driver to r2991. Fixes issue where DAW channels 17-20 were not present on a Saffire Pro40 (also available in previous 3.8b1 beta).

Saffire Mix Control 3.7 — Mac

Release notes

Includes a fix for Saffire interfaces that would not retain their Sync Source in standalone mode.
Includes a fix for OS X users seeing the «No Hardware Connected» message and experiencing disconnects on account of there being two drivers installed (after the 3.5/3.6 upgrade).
Includes a fix to keep Saffire Mix Control running after new firmware is deployed to the Saffire interface.

Saffire Mix Control 3.5 — Mac

Mac only release for OS X 10.9 and 10.10

Release notes

This release has a version of the driver that has been signed to be compatible with Mac OS 10.10 Yosemite. If you are running Mac OS 10.8 Mountain Lion or earlier please refer to the driver versions below.

Fixes

The driver is signed for Yosemite.
Fixed issue with sync source could get stuck on internal.
Fixed issue where menu bar might not appear on Mac OS X Mavericks.
Fixed issue where harmonics would not be reset using line input (LS56 only).

Saffire Mix Control 3.4 — Mac

Release notes

This installer includes all necessary drivers and software to run the firewire Saffire range of Focusrite interfaces.

Fixed issue that might cause glitches using Quicktime on OS X Mavericks
Fixed issue that might cause distortion on second ADAT port and loopback using Liquid Saffire 56
Improved sample rate switching

Tested with:

Mac OS 10.8
Mac OS 10.9
Windows 7
Windows 8

Please note: this version of Saffire MixControl is no longer supported. For the latest supported version please see the latest release version on this page.

Saffire Mix Control (v2.4) — Mac

Release notes

Driver updated to 3.5.6 release
Adds support for Mac OS 10.7 (Lion)
Improves performance with Pro Tools 9 (Mac and PC)
Fixed snapshot load/save functions (Mac)
Fixed crash on non-admin accounts (Mac)

Windows Users: This release requires the use of the Windows Legacy FireWire driver on Windows 7 64-bit. Windows 7 32-bit users should however use the default Windows 7 FireWire driver.

Documentation

Saffire Pro 40 User Guide English — EN

Saffire Pro 40 Benutzerhandbuch Deutsche — DE

Saffire Pro 40 Guía del usuario Español — ES

Saffire Pro 40 Mode d’emploi Français — FR

Saffire Pro 40 ユーザーガイド日本語 — JA

Saffire Pro Standalone Mode User Guide

Release notes

User guide explaining standalone mode operation for the Saffire interfaces. Please note Saffire MixControl v1.7, or above, is required for standalone operation.

Firewire Safety when Plugging and Unplugging Devices

Release notes

This article explains the steps necessary to safely plug in and unplug your FireWire devices without causing damage to the device or your computer.

Источник

Lives for gear

Joined: Nov 2010

🎧 10 years

@
pepelevamp
— kudos for this update. I had been using my Pro 40 as additional inputs for my ProjectMix IO, but I’m consolidating and freeing up space, and while everything looked like it was going to be fine, I went to play something back in 96khz and it was super choppy. Some Googling brought me to this thread, and with a little trial and error, I got it working.

Here’s some super basic step-by-step details:

1) Install Mixcontrol 3.4
1a) In Control Panel -> Sound, disable Saffire Pro 40 (don’t use it for your system audio)
2) Browse to the folder where it was installed (e.g. C:\Program Files\Focusrite\Saffire MixControl)
3) Rename Pro40Firmware.bin to anything else. For example, rename it to Pro40Firmware.bin.3.4
4) Uninstall MixControl — this will remove all the files except the one you renamed. This will require a restart — might as well.
5) Install MixControl 3.7 into the same folder as last time
6) Browse to the folder where it was installed
7) Rename Pro40Firmware.bin to Pro40Firmware.bin.3.7
Rename Pro40Firmware.bin.3.4 to Pro40Firmware.bin
9) Optionally, restart your computer

Note: At this point, MixControl wasn’t connecting to my device. Got a little weirded out at first, but here’s how I got that under control:

10) Open Device Manager
11) Under «Sound, Video, and Game Controllers» (or something sound related), you should see an icon indicating that the Saffire driver is missing.
12) Tell it to find a new driver, and that you’ll browse to the correct folder
13) Paste in the folder where MixControl was installed — it should correct the driver installation
14) Fire up MixControl — you should now see the familiar mixer interface, and your Firewire light should be lit.

I did still see some weirdness on my first go around — the sample rate kept jumping around, the Firewire light on the device was blinking. In MixControl, I clicked File -> Restore Factory Defaults, and that fixed that. I also clicked «Save to Hardware» but I’m not real sure that’s relevant.

Anyway, I almost never listen in 96khz, but it was a good indicator that the buffering wasn’t working like it should have been. Thanks for figuring this one out, I would have been bummed out and probably wouldn’t have chased down the old driver like you did, since this hardware is new to me.

Last edited by Leviathant; 11th October 2021 at 06:59 PM..

Источник

Drivers /
Sound, video, and game controllers /
Focusrite /
Saffire Pro40

Device information

Name

Saffire Pro40

Manufacturer

Focusrite

Type

Sound, video, or game controller

Hardware IDs

1394\FOCUSRITE&SAFFIRE_PRO_40
1394\FOCUSRITE&SAFFIRE_PRO_40_1

Show all

Driver Fusion

Automatically update and back up drivers

Learn more

Download now

saffire.inf

Windows 11, 10, 8.1, 8, 7
x64/x86

Источник

Download Epson L3150 Printer drivers and software to set up your all-in-one inkjet printer effortlessly. Access official Epson resources for seamless installation, wireless connectivity, and optimal performance. Ensure compatibility with Windows, macOS, and other operating systems for printing, scanning, and copying tasks. Simplify setup with user-friendly tools and updates tailored for the L3150 model.

Learn how to create a bootable Windows 11 USB drive with this step-by-step guide. Follow simple instructions for preparing your USB, using Microsoft’s Media Creation Tool, and installing Windows 11 effortlessly. Perfect for clean installs, upgrades, or troubleshooting – simplify your setup process in minutes!

Enable Bluetooth on your Windows 10 device in seconds! Learn quick methods to activate Bluetooth via the Action Center, Settings app, or Device Manager. Troubleshoot common issues like missing toggles or driver updates for seamless wireless connectivity.

Learn how to enable Bluetooth on Windows 11 with this quick guide. Discover step-by-step instructions to turn on Bluetooth via Settings or the Quick Settings menu, pair devices, and troubleshoot common issues. Stay connected effortlessly!

Resolve common HP printer and scanner issues instantly using HP Print and Scan Doctor. This official tool diagnoses connectivity, printing, or scanning errors automatically, offering step-by-step fixes to restore functionality and optimize performance in minutes.

Experience crystal-clear visuals with Photo Viewer, a professional tool designed to showcase images in stunning detail. Enjoy seamless zoom, vibrant color accuracy, and support for multiple formats—all in an intuitive interface. Perfect for photographers, designers, or anyone seeking fast, reliable image viewing.

Experiencing No Audio Output Device Installed on Windows 10? This guide provides quick fixes to resolve the error. Learn how to update drivers, check hardware connections, reinstall audio devices via Device Manager, and troubleshoot Windows settings. Restore your sound in minutes with these step-by-step solutions.

Virtual Audio Cable lets you route audio between apps in real time, streamlining streaming and recording workflows. Designed for creators and professionals, it delivers studio-quality audio transfer with zero latency—no setup hassles or advanced skills needed.

Unleash curiosity with the Intel Play QX3 Microscope, a dynamic tool that transforms microscopic exploration into an immersive digital experience. Capture real-time images and videos, magnify specimens up to 200x, and interact with the hidden world through user-friendly software. Ideal for budding scientists, this device bridges learning and play, making complex science accessible and engaging.

Explore how cutting-edge audio technology transforms your drive into an immersive sonic experience. Discover the power of seamless sound engineering, precision acoustics, and innovative design that turns every journey into a symphony of clarity, depth, and emotion on the road.

See all queries

Источник

Странно, что у вас проблема с Focusrite saffire на винде 10. У меня liquid saffire 56, на Windows 10 полет нормальный. На материнке firerwire порта нет, поэтому докупал контроллер PCIe ex1 — Firewire с чипом texas instruments. После установки драйвера при первом включении карты, индикатор FW active непрерывно мигает, пока система не настроит драйвер, а далее выключив карту и включив все работает как надо

@Raptor82, не подскажете по точнее какой фирмы вы купили контролёр PCIe ex1 — Firewire?

ST-Lab F-301

ST-Lab F-301 как раз на чипе TI

Источник