Fltmgr sys при установке windows

fltmgr.sys is a system file that ensures all files existing on the hard drive to be in the respective directories. Full form of the file is Microsoft Filesystem Filter Manager that also makes sure that the data written to the HDD is correct and not corrupted. Error fltmgr.sys BSOD occurs when this process can’t perform its duty properly and system keeps crashing with random restarts. This blue screen of death mostly appears with Kmode exception not handled, Page fault in nonpaged area, Memory_management, and Irql_not_less_or_equal.

File System Filter Manager becomes damaged or unreadable if the communication between CPU and hardware is lost or malfunctioned. Other potential reasons that cause fltmgr.sys blue screen error is missing system components, malware infection, outdated device drivers, and cracked software programs. Sometimes, a simple restart works as a tweak to fix fltmgr.sys BSOD. On the other hand, the same blue screen of death occasionally doesn’t let you login into your system thus resolving the issue becomes difficult.

fltmgr.sys BSOD Error in Windows 10

Here is how to fix fltmgr.sys BSOD Error in Windows 10 –

1] Boot into Safe mode with Networking

To solve this Blue screen issue you need to boot in safe mode with networking in the condition you cannot access the desktop. Suppose you are able to log in after encountering fltmgr.sys BSOD error, you can directly move to method 2.

1. Click the search icon on the taskbar.
2. Type – advanced startup.
3. Press – Restart now.
4. On the coming screen, go to Troubleshoot => Advanced options => Startup Settings successively.
5. Next, click – Restart.
6. Once the system powers up, press 5 or f5 to enable Safe Mode with Networking.

2] Perform Virus scan

fltmgr.sys with page fault in nonpaged area, kmode exception not handled, memory_management
, or irql_not_less_or_equal might occur when malware enters the system. During this process, some fundamental elements that are necessary to make sure the smooth functioning of Windows 10 PC either go missing or become corrupted.

Threat or attack is nearly impossible for Windows 10 because the version has built-in utility Windows security that ensures online and offline safety. Despite, an outdated operating system, broken device drivers, disabled security suite oftentimes make it easy for malware to get access. So, before you try out any other solutions, it’s important to eliminate existing malware so that it can’t overspread.

1. Press – Windows + S.
2. Type in – Virus & threat protection.
3. Hit – Enter.
4. Click the link reading  – Scan options.
5. Hit the radio button set for – Full scan.
6. Click – Scan now.

1. If the utility traces out any malware, hit – Clean Threat.
2. Thereafter, click Remove and then Start actions.
3. Once the removal process ends, reboot Windows.

3] Restore missing system elements

Some system files might be disappeared or misplaced due to malware infection or software conflict or other reasons. If any of these items are related to File System Filter Manager, you need to restore the missing components. System File Checker comes to the rescue in such conditions. Sfc /Scannow mainly is a command-line utility that scans the integrity to resolve the defective system files and restore lost system elements. To run the same –

1. Click the search icon from taskbar.
2. Type – cmd.
3. Press – Ctrl + Shift + Enter.
4. When User  Account Control asks for approval, click – Yes.
5. In the elevated Command Prompt, insert – sfc /scannow.

1. Hit – Enter.
2. After completion of the scanning process, restart the Windows PC.

4] Update Windows 10

fltmgr.sys BSOD still persists even after following the above ways then there is a chance that your system lacks some critical updates. To get –

1. Press – Windows + I.
2. Click – Update & Security.
3. From the right-hand side, click – Check for updates.
4. If there is an available patch, click – Download.
5. After downloading when the installation process finishes, hit – Restart now.

5] Make sure all device drivers are up-to-date

Automatic update also installs OEM drivers but sometimes they are broken or incompatible. That’s why some users keep device drivers excluded from updates. There might be some other situations too when you need to search for device drivers update manually.

1. Press – Windows key.
2. Type – devmgmt.msc.
3. Hit – Enter.
4. When “Device Manager” appears, look for the device that may cause fltmgr.sys BSOD.
5. Double-click the same.
6. Find out which driver is causing issue or outdated.
7. Right-click on that ‘driver’ and choose – Update driver.
8. Opt for – Browse my computer for drivers.
9. Click – Let me pick from a list of available drivers on my computer.
10. Select the correct model.
11. Hit – Next.
12. After installing the update, reboot the device.

6] Check external hardware to fix fltmgr.sys BSOD

fltmgr.sys BSOD is often caused by connected peripherals like printers, external hard drives, second monitors, and Bluetooth devices. So, disconnecting them may solve the problem. However, you can keep the mouse and keyboard attached.

To check whether any of your connected hardware is damaged, disjoint their USB cables from the individual ports. After that, restart Windows 10 and see if the blue screen error still exists. If no, connect the peripherals one after another. In the meantime, check if any particular hardware is triggering the blue screen error.

7] Resolve disk error

Malfunctioned or corrupted hard drive can also cause fltmgr.sys BSOD. If the problem is non-physical, CHKDSK command-line can be a lifesaver, or else you will have to replace the hard disk with a new one. Disk checking utility analyzes the hard drive to find out existing error moreover fix found issue automatically. To execute the same –

1. Open Command Prompt as administrator.
2. Type in – chkdsk c: /f /r.
3. Hit – Enter.

8] Replace corrupted fltmgr.sys

To replace the original fltmgr.sys that is probably corrupted, you need to download the file first and then insert it into the correct directory. This procedure is super easy if follow the below steps precisely. Steps are as followed –

1. Download – fltMgr file.
2. Unzip the file and copy fltmgr.sys.
3. Visit the fltmgr.sys location folder –  C:\Windows\System32\drivers.
4. Delete the existing file paste the downloaded one.

9] Reinstall Microsoft Office access to fix fltmgr.sys BSOD

Many Windows 10 users reported that they started finding fltmgr.sys BSOD after installing Microsoft office access program. If the same happens to you, uninstall the app first. Here’s how –

1. Press – Windows + R.
2. In the void text bar, put – appwiz.cpl.
3. Click – OK.
4. Find – Microsoft Office Access.
5. Right-click the same and choose – Uninstall.
6. Keep following on-screen directions to complete the removal process.
7. Once done, restart the Windows system.
8. Check if fltmgr.sys BSOD is fixed.
9. Now, visit the Download Center of Microsoft.
10. Reach to Microsoft Access 2010 Runtime segment.
11. Choose the preferred language and click – Download.
12. After downloading, install the program in the usual way.

10] Reset the OS

Installing new software programs or making any changes in the settings or services modify Windows components along with registry keys. If these modifications don’t go with your system, fltmgr.sys BSOD may be generated. To eliminate the blue screen error, you can reinstall Windows 10 afresh. Steps are as followed –

1. Click – Start icon.
2. Type – reset this PC.
3. Hit – Enter.
4. From the right-pane, click – Get started.

1. Select – Keep my files.
2. Choose – Local reinstall.
3. Click – Next.
4. Hit – Reset.

11] Use Blue Screen Troubleshooter

To fix BSOD occurring on Windows 10, Microsoft offers a walkthrough troubleshooter escorting you till the end of the error. You can try the series of steps there to figure out the issue on your PC.

Go to this – BSOD troubleshoot page, select the correct reason, and follow the stepwise instructions provided there.

12] Repair Windows 10 to fix fltmgr.sys BSOD Windows 10

If you are still struggling with fltmgr.sys BSOD after trying out the above workarounds, there must be some serious corruption. This generally happens due to sudden power failure, virus attack, improper shutdown, and hardware as well as software errors.

In such a case, the last resort you can try out is repairing the Windows. This way, all defective and broken files will be replaced with fresh ones moreover the operational speed of the system will be smoother. To repair the system, you will have to use the Windows CD that comes with the device.

Methods list
1] Boot into Safe mode with Networking
2] Perform virus scan
3] Restore missing system elements
4] Update Windows 10
5] Make sure all device drivers are up-to-date
6] Check external hardware
7] Resolve disk error
8] Replace corrupted fltmgr.sys
9] Reinstall Microsoft Office access
10] Reset the OS
11] Repair Windows 10

That’s all!!

^✻ Фрагменты данных файлов предоставлены участником Exiftool (Phil Harvey) и распространяются под лицензией Perl Artistic.

BSoD or Blue screen of death errors are the most dreaded errors in Windows. They indicate a major issue and unexpectedly crash computers. One such BSoD is the fltMgr.sys blue screen of death, which occurs due to multiple reasons like virus infection, corrupted data, and more.

The fltMgr.sys or Microsoft File system Filter Manager file is an important part of the OS, which handles data storage drives like hard drives. Windows uses this file to interact with the system storage and file manager. This file also ensures that the hard drives are accessible and their data readable.

If the fltMgr.sys fails, users encounter an unexpected crash along with the fltMgr.sys blue screen right away. This error screen displays an error code that varies depending upon the trigger behind the error. Some of these error codes are –

• SYSTEM_SERVICE_EXCEPTION
• PAGE_FAULT_IN_NONPAGED_AREA
• KMODE_EXCEPTION_NOT_HANDLED

Картинка с сайта: www.stellarinfo.com

In most cases, the error is caused by corrupted data present on the drive or due to a hardware failure. However, there could be more reasons behind this pesky issue. If you are encountering this error, the reasons could be –

• Bad Windows update
• Power outage
• Corrupt system files
• Corrupted data
• Corrupted hard drive
• Hardware damage
• Malware infection due to illegitimately obtained software

As the fltMgr.sys BSoD is displayed without any bug check value; it becomes a bit tricky to resolve it using the simple code mentioned along with it. However, there are ways you can try to get rid of this error. Let’s dive in to the methods to fix the fltMgr.sys error.

Methods to Fix the fltMgr.sys BSoD Error

Here, we will discuss some methods you can use to easily get rid of the fltMgr.sys blue screen error.

Pre activity –

Before moving on to the methods, let’s perform a few steps to see if there’s a problematic application or hardware causing the fltMgr.sys BSoD error screen to occur frequently.

• Load your PC into safe mode to check for any problematic application.
• Check hardware for any physical damage using the hardware troubleshooter. Also, use Memtest86 to check the RAM.

These preliminary checks will allow you to gauge the extent of the damage. If you encounter the fltMgr.sys BSoD while trying to enter the safe mode, it means there is severe damage.

To fix the fltMgr.sys BSoD error, we will first use System Restore to restore the PC to a previous healthy state. While this has helped a lot of users, it might not work every time. In such a scenario, we will reinstall Windows, which is the last resort to fix any Windows error.

Performing System Restore doesn’t affect the data present on your hard drive. It simply restores the system to a previously known healthy state. On the other hand, clean installing Windows will remove everything, including the data and files present on the storage media. Hence, always back up your critical data on an external storage drive before proceeding with these methods.

If the fltMgr.sys has failed and your computer is stuck in an endless loop of the fltMgr.sys BSoD error, your data present on the HDD/SSD will become inaccessible.

Картинка с сайта: www.stellarinfo.com

Get hold of a professional data recovery software like Stellar Data Recovery Professional to recover your data stuck in an inaccessible system. Simply create a bootable recovery media (USB) using another PC and boot into the problematic PC. Refer to our guide to perform data recovery from an unbootable PC.

Once you have retrieved your data, it is time to start troubleshooting the fltMgr.sys blue screen error.

Method 1: Perform System Restore

Here, we will take the help of Windows Installation media to enter WinRE and then perform the system restore. You can use an old system restore point to revert to a previous error-free state. Doing so will bring back all the system settings of the selected state and will remove any changes made after that save point. Here’s how you can do this –

• Connect your Windows installation media to your computer and boot your computer with it.
• On the installation screen, click on Repair your computer.

Картинка с сайта: www.stellarinfo.com

• Go into WinRE and then click on Troubleshoot > Troubleshoot > Advanced options.
• Click on the System Restore option.

Картинка с сайта: www.stellarinfo.com

• In the System Restore window, click on the version you wish to restore and click on Scan for affected programs.
• Then, click on Next to proceed with your selection.

Картинка с сайта: www.stellarinfo.com

• On the final screen, click on Finish.

Картинка с сайта: www.stellarinfo.com

Wait for the process to end. This will restore your Windows 10 computer to the selected state. Check if this fixes the fltMgr.sys blue screen error on your PC.

Once you have restored the system to a healthy state, install any available driver and software updates. Keeping your system updated will help you avoid such errors.

Method 2: Reinstall Windows

Using the system restore point to load a previous healthy state is a great way to resolve errors, such as the fltMgr.sys BSoD. However, if that doesn’t work, you will have to clean install the Windows as a last resort. For this, you will have to use your Windows version-specific installation media and use it to boot your computer.

For booting your computer via installation media, you will have to change the boot sequence by going into the BIOS. Once it is done, your computer will restart automatically and display the installation screen. Follow the instructions on screen to proceed with the OS installation procedure. You can also refer to this guide for detailed steps.

Reinstalling Windows from scratch should eliminate the fltMgr.sys blue screen error from your system. You can now reinstall applications and restore all your data backed up on an external drive.

Conclusion

Like any other BSoD error, the fltmgr.sys blue screen error can unexpectedly crash the computer and make it unstable. We hope one of the methods explained above helped you quickly resolve the blue screen error.

P.S. – Always keep your drivers & OS updated, avoid downloading software from unreliable sources, and regularly maintain a data backup.

Related Topics –

PAGE_FAULT_IN_NONPAGED_AREA

kmode_exception_not_handled

FAQs

Некорректная работа компонентов системы нередко приводит к аварийному завершению работы ПК, сопровождающимся синим экраном смерти или BSOD. Такие ошибки являются критическими, и их необходимо безотлагательно устранять. Далее мы разберем возможные причины одного из таких сбоев с указанием на драйвер fltmgr.sys.

BSOD fltmgr.sys в Виндовс 7

Данная ошибка возникает по нескольким причинам. В первую очередь это возможные проблемы с системным жестким диском. Есть и другие факторы, вызывающие BSOD fltmgr.sys. Например, ошибки в драйверах, системных файлах или проблемы в аппаратной части.

На нашем сайте имеется инструкция для синих экранов общего типа. Рекомендации, содержащиеся в ней, можно использовать и для исправления обсуждаемой сегодня ошибки. Если с их помощью не удалось устранить проблему, воспользуйтесь способами, приведенными ниже.

Подробнее: Синий экран на компьютере: что делать

Причина 1: Системный диск

На системном диске «лежат» не только файлы ОС и программ. Его пространство активно используется для хранения временных данных, используемых всеми запущенными процессами. Первое, на что следует обратить внимание, это на размер свободного пространства. Если его недостаточно (менее 10 процентов), будут наблюдаться различные неполадки – задержки («тормоза») и появляться ошибки. В таких случаях прибегают к очистке диска от мусора и перемещению больших (и не только) файлов и папок на другие накопители.

Подробнее: Как исправить ошибки и удалить мусор на компьютере с Виндовс 7

Главная причина, по которой мы пишем данный параграф, это невозможность воспользоваться системными и сторонними инструментами очистки в ситуации, когда ошибка возникает при загрузке Виндовс. Здесь нам поможет только загрузочная флешка с ERD Commander или похожим Live-дистрибутивом. С ее помощью можно поработать с накопителями без запуска ОС.

Подробнее:
Как записать ERD Commander на флешку
Как выставить загрузку с флешки в БИОСе

1. После того как загрузится ERD, выбираем систему в списке, руководствуясь версией и разрядностью.
   

   Картинка с сайта: lumpics.ru

2. Подключаемся к сети, чтобы иметь возможность воспользоваться сетевыми ресурсами, как дополнительным пространством для хранения файлов. Если сетевых дисков в системе нет, можно не инициализировать данную процедуру.
   

   Картинка с сайта: lumpics.ru

3. На следующем этапе нам будет предложено переназначить буквы томов (дисков). Это можно сделать для удобства, но нам известно, с каким накопителем предстоит взаимодействовать, поэтому данную опцию также можно не использовать.
   

   Картинка с сайта: lumpics.ru

4. Настраиваем раскладку «клавы». Здесь можно оставить автоматически назначенный вариант.
   

   Картинка с сайта: lumpics.ru

5. Далее ERD Commander запустит процесс сканирования для поиска установленных копий «винды». После того как система будет найдена, выбираем ее и переходим к следующему шагу.
   

   Картинка с сайта: lumpics.ru

6. В окне со списком инструментов, содержащихся в дистрибутиве, переходим по ссылке MSDaRT («Microsoft Diagnostics and Recovery Toolset»), расположенной в самом конце.
   

   Картинка с сайта: lumpics.ru

7. Ищем раздел «Проводник» и кликаем по нему.
   

   Картинка с сайта: lumpics.ru

8. В левом блоке с деревом папок ищем системный диск (на нем будет директория «Windows»).
   

   Картинка с сайта: lumpics.ru

9. Первым делом чистим «Корзину». Ее файлы лежат в папке с названием «$Recycle.Bin». Обратите внимание, что мы удаляем только содержимое, саму директорию следует оставить на месте.
   

   Картинка с сайта: lumpics.ru

10. Следующими «клиентами» на очистку являются папки, содержащие пользовательские файлы. У нас это

    C:\Users\Lumpics

    C – буква системного диска, Lumpics – имя учетной записи.

    Особое внимание следует уделить папкам с загрузками («Downloads») и документами («Documents»). Если вы имеете привычку держать много файлов на рабочем столе, найти их можно в директории «Desktop». Можно пройтись и по другим, только не удалите что-нибудь важное.

    

    Картинка с сайта: lumpics.ru

    Если требуется сохранить данные, при этом освободив место, их можно переместить на другой диск или флешку (ее нужно подключить до загрузки). Делается это так: кликаем по файлу, раскрываем контекстное меню правой кнопкой мыши и выбираем соответствующий пункт.

    

    Картинка с сайта: lumpics.ru

    В открывшемся окне выбираем новое место для сохранения и жмем ОК.

    

    Картинка с сайта: lumpics.ru

11. После завершения очистки перезагружаем машину. Разумеется, нужно будет вернуть прежние настройки БИОС, чтобы запустить систему с жесткого диска.

Причина 2: Повреждение драйвера

Поскольку драйвер fltmgr.sys является системным, то есть входящим в дистрибутив ОС, отдельно его переустановить не представляется возможным. При его повреждении помогут только инструменты для восстановления системных файлов – SFC или DISM. Правда, ими нужно пользоваться с осторожностью, особенно, если установлена пиратская копия или сборка «винды», а также различные пакеты для изменения оформления.

Подробнее:
Как восстановить системные файлы в Windows 7
Восстановление поврежденных компонентов в Windows 7 при помощи DISM

Эту операцию можно произвести и без загрузки Виндовс с помощью уже знакомого нам ERD Commander.

1. Загружаемся с флешки с дистрибутивом и доходим до окна MSDaRT. Здесь выбираем указанный на скриншоте инструмент.
   

   Картинка с сайта: lumpics.ru

2. В открывшемся окне «Мастера восстановления системных файлов» жмем «Далее».
   

   Картинка с сайта: lumpics.ru

3. Оставляем переключатель в положении автоматического исправления и запускаем процесс.
   

   Картинка с сайта: lumpics.ru

4. Дожидаемся завершения операции и перезагружаем компьютер с жесткого диска.
   

   Картинка с сайта: lumpics.ru

Причина 3: Графический адаптер

Проблемным компонентом, вызывающим ошибку, может стать видеокарта или ее драйвер. Для проверки необходимо отключить карту от ПК и промониторить появление ошибки. Изображение на монитор в таких случаях выводится через встроенную графику или другой заведомо исправный GPU, если в процессоре нет видеоядра или на материнской плате отсутствуют нужные разъемы.

Картинка с сайта: lumpics.ru

Подробнее:
Как включить или отключить встроенную видеокарту на компьютере
Как снять видеокарту с компьютера
Подключаем видеокарту к материнской плате ПК

Если проверка графического адаптера не выявила неполадок, то есть синий экран продолжает возникать, нужно переустановить видеодрайвер, предварительно удалив его в «Безопасном режиме».

Картинка с сайта: lumpics.ru

Подробнее: Переустанавливаем драйвера видеокарты

Причина 4: БИОС

Неверные настройки или устаревание микропрограммного обеспечения BIOS или UEFI могут стать причиной синего экрана, о котором идет речь. О сбросе параметров написано в общей статье о BSOD, поэтому в данном параграфе мы поговорим про актуальность версий. Обновление позволит обеспечить совместимость всех компонентов ПК и устранить возможные ошибки. Задуматься о прошивке следует при установке новых комплектующих, особенно тех, что пользуются системными драйверами. Это новые диски, в частности, SSD, работающие через линии PCI-E (NVME), различные контроллеры и другое дополнительное оборудование. Замена процессора без обновления БИОС также может стать фактором, влияющим на сбои в работе системы.

Мы не будем приводить ссылки на подробные инструкции, так как их очень много. Найти необходимую информацию можно самостоятельно, введя в поиске на главной странице нашего сайта запрос «обновить биос».

Картинка с сайта: lumpics.ru

Заключение

Предугадать или предупредить появление синего экрана с ошибкой fltmgr.sys в Windows 7 довольно сложно, так как на ее возникновение влияет слишком много факторов. Впрочем, пару советов дать можно. Во первых, мониторьте состояние системного диска и не допускайте его заполнения «под завязку». Во-вторых, старайтесь своевременно обновлять систему и драйвера, а также следите за выходом новых прошивок для вашей материнской платы на официальном сайте производителя. Следование этим рекомендациям значительно снижает риск появления сбоев в системе.

Наша группа в TelegramПолезные советы и помощь

Fltmgr.sys BSOD (blue screen of death) is common. For instance, Fltmgr.sys BSOD appears after you create an email in outlook. Like many other BSOD errors such as internal power BSOD, blue screen due to the fltmgr.sys file is a system problem that may disable users from running the computer smoothly.

Картинка с сайта: tencomputer.com

More often than not, you may hit upon various variants of Fltmgr.sys BSOD errors like System_Service_Exception, Irql_not_less_or_equal, or kmode_exception_not_handled, or page_fault_in_nonpaged_area fltmgr.sys. This post will show you common but useful solutions to get out of the blue screen.

What is FltMgr.sys? Is it Virus, Trojan, Spyware, and Malware?

Fltmgr.sys, short for Microsoft File System Filter Manager, is a system file that ensures files on the hard drive to be located in the right directories and data on the hard drive is correct. Users can normally locate this find in C drive > Windows > System 32.

As a system file on the Windows system, fltmgr.sys is not a virus, Trojan, spyware, or malware. However, once Microsoft File System Filter Manager (fltmgr.sys) is infected or even damaged by viruses, it will stop working and fail to realize the communication between the computer CPU and hardware. In this case, a blue screen error may pop up due to the malfunctioned fltmgr.sys file.

How do I Fix FltMgr.sys Blue Screen of Death on Windows 11, 10, 8, 7?

As it has been suggested, when the system file fltmgr.sys is corrupted, it may result in various system errors, mostly, endless BSODs and tasks randomly being killed due to the fltmgr.sys blue screen error. Common culprits of the File System Filter Manager BSOD are corrupted files, drivers, malware, and computer hardware like disk errors.

Or sometimes, system conflicts or crashes are the root cause of your blue screen System_Service_Exception (fltmgr.sys) or any other BSOD errors caused by this system file. You can remove the filed fltmgr by following the solutions below.

Solutions:

• 1: Restart the Computer
• 2: Enter the Safe Mode
• 3: Check the Hardware
• 4: Run SFC
• 5: Update Device Drivers
• 6: Check Disk Drives
• 7: Check for Updates

Solution 1: Restart the Computer

Sometimes, a simple computer restart may help you deal with various computer problems, with no exception for system crashes like BSODs.

Once you noticed that blue screen with the error message of fltmgr sys, you may as well reboot your device to see if the blue screen will disappear and whether you can use the device as smoothly as before.

Solution 2: Enter the Safe Mode

If restarting the computer does not help, your device is trapped into fltmgr.sys blue screen of death loop. Whether you can boot up the Windows system or not, try to enter the safe mode using different ways.

In the safe mode, users can run the computer with minimal programs and features so that file and program corruptions will be removed to allow you to troubleshoot the tricky fltmgr.sys blue screen problem.

You can choose to get into the safe mode with networking or command prompt and then fix the file manager error more easily.

Solution 3: Check the Hardware

Windows 10 BSOD system_thread_exception_not_handled FLTMGR.sys when accessing programs over the network also requires users to make sure there are not any hardware issues.

Understandably, any hardware problems like Windows setup could not configure Windows to run on this computer’s hardware may result in BSOD. Therefore, you need to disconnect all the external devices and then check the fltmgr.sys error persists and then connect them if needed. 

Solution 4: Run SFC

Corrupted system files will also
cause FLTMGR.sys Windows 10 blue screen. In this way, it is necessary for you
to run the System File Checker, a Windows-based file checker, to automatically
troubleshoot and correct file corruption. As a system file, fltmgr.sys will be
checked by the system checker easily.

1. Search Command Prompt in the search box and then right click the result to Run as administrator.

2. In Command Prompt, enter sfc/scannow and then press Enter to run System File Checker.

Wait until SFC finishes checking all the system files on Windows 10, 8, 7. You then will be prompted what system files are corrupted and whether SFC can correct them itself.

After that, fltmgr.sys BSOD errors will disappear and you are advised to run SFC regularly to prevent fltmgr.sys blue screen.

Solution 5: Update Device Drivers

Fltmgr.sys kmode_exception_not_handled or System_Service_Exception or any other BSOD errors demand users to ensure all the device drivers like the network and graphics card drivers updated to achieve the communication between the hardware and the system.

That is to say, you might as well check all the driver versions and update all the device drivers to make them compatible with the system without any system crashes.

Here, Driver Booster
is a recommendable driver tool for you to search for, download, and install all the device drivers automatically and quickly. This driver tool will then help you fix the blue screen due to the File System Filter Manager more easily.

1. Download, install and run Driver Booster on Windows 11 or 10.

2. Hit Scan.

Картинка с сайта: tencomputer.com

3. Find out Update all to get all the device drivers updated at the same time.

Картинка с сайта: tencomputer.com

With all the drivers installed,
you will see no more memory management blue screen of death on Windows 10, 8,
7. You can access any program as you wish.

Solution 6: Check Disk Drives

Since fltmgr.sys is a system
file, corrupted files or disk drives may give rise to blue screen Fltmgr.sys on
Windows 10. It is also a necessity to troubleshoot the hard drive problem
regularly to keep your computer safe and away from viruses and malware.

1. Type File Explorer in the search box and then press Enter to navigate to File Explorer.

2. Right-click the hard drive that you are to troubleshoot, such as hard drive E to open its Properties.

3. Under Tools, locate Error checking and then hit Check.

After that, you can observe that
the disk error checking tool is troubleshooting your hard drive. If possible,
you can also check the disk errors in other hard drives to ensure there is no
hard drive corruptions that may lead to fltmgr.sys blue screen error.

Solution 7: Check for Updates

The window system may also be one of the culprits of the BSOD error caused by the File Memory Manager. Sometimes, you may run into the blue screen labeled by fltmgr.sys due to system corruption.

Microsoft may have sometimes provided you with fixes for various system problems. Therefore, you can try to install the system updates to prevent BSOD issues.

1. Find out Start > Settings > Update & Security.

2. Under Windows Update, hit “Check for updates”. 

Картинка с сайта: tencomputer.com

In a word, this article shows you how to fix fltmgr.sys BSOD on Windows 7, 8, 10 using different solutions. You can get out of the blue screen loop caused by the fltmgr.sys with one or more methods.

More Articles:

Fixed: Faulty Hardware Corrupted Page Blue Screen on Windows 10/11

8 Ways to Fix Kernel Security Check Failure on Windows 10/11

Solved: NTFS File System Error on Windows 10/11