Fix ssd windows 10

Ваш SSD-накопитель не видится в диспетчере устройств? Не паникуйте! Если ваш новый твердотельный накопитель не отображается в вашей системе. К вашему удивлению, существует 6 способов исправить Windows, не видит SSD, и вы можете сделать это даже самостоятельно. Независимо от того, новый у вас твердотельный накопитель или старый, в этой статье описываются все проблемы, которые могут возникнуть, и их пошаговые решения, а также иллюстрируются картинками. Есть несколько причин, из-за которых вы можете столкнуться с этой проблемой. Соответствующие решения для не видит ssd Windows 10/11, приведены ниже, вы можете любезно просмотреть все части, чтобы определить и устранить проблему.

Last updated on April 22, 2024

What should you do when your SSD freezes on Windows 10/11? Can changing cluster size without formatting fix the issue? Do you know why an SSD can freeze? There are four common factors that may lead to this problem. It could be that you connected the SSD to the wrong SATA port, since your PC has multiple different SATA ports. Another reason is that AHCI mode is not enabled. The third one is unaligned 4K, and besides, physical damage to the SSD can also cause freezing. In this post, tools Software will show you 4 methods to unfreeze and fix the SSD.

< a id=»1″ name=»1″>4 Ways to Fix SSD Freezing in Windows 10

In this section, we will present four distinct solutions to help you address the issue of an SSD freezing error on your Windows 10/11 system. Each method offers detailed steps tailored to a specific aspect of the problem, ensuring a customized solution for your SSD’s predicament.

Solution 1: Check if the SSD is connected to the correct port

SATA ports are used for data transfer and come in three types: SATA I, SATA II, and SATA III. To fully leverage the high-speed performance of an SSD, it should be connected to a SATA III port, which allows for data transfer rates of up to 600 MB/s. Connecting an SSD to an incompatible port, such as SATA II, can lead to speed issues and malfunctions. To address the «SSD freezing» problem, ensure that the SSD is correctly connected to the appropriate port.

Картинка с сайта: www.share-tools.com

Read more:

Solution 2: Enable AHCI mode

AHCI is a modern mode for interfacing with memory devices that unlocks the benefits of SATA, such as faster data exchange with SSDs and HDDs and hot-plugging. Enabling AHCI can significantly increase file access speeds and overall PC performance.

Please enable AHCI mode by following these steps:

1. Open the Registry Editor. Type “regedit” into the Run window, then press “Enter.”

Step 2. Click “OK” when you see the pop-up window.

Step 3: Navigate to “HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\iaStorV”. Once you’re in the “iaStorV” section, double-click on “Start” and change its value to 0.

4. Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\iaStorAV\StartOverride and open the “0” entry, then change its value to 0.

Step 5: Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\storahci, and edit the Start entry, changing its value to 0.

Step 6: In the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\storahci\StartOverride section, open the 0 entry and set its value to 0.

Картинка с сайта: www.share-tools.com

Step 7. Exit the Registry Editor, restart your computer, and enter BIOS. You might want to boot Windows in Safe Mode for the first restart.

Step 8. In the BIOS, find the SATA settings and look for the disk mode. Change this setting to AHCI, save the changes, and restart your computer.

Step 9. After the restart, Windows will begin installing the SATA drivers. Once this is done, you’ll be prompted to restart again. Upon completing this step, AHCI mode will be enabled on your Windows installation.

Solution 3: Align SSD to 4K

Without 4K alignment, an SSD may also get stuck. In this part, we will help you check whether your SSD is 4K aligned. If not, we will provide tools and guides on how to align SSD with 4K.

Step 1: Check if the SSD is 4K-aligned

You need to check if the SSD is 4K aligned. If the SSD is not properly aligned to the 4K standard, its performance might be affected, which could lead to freezing issues with the SSD.

Follow the steps:

1. Hold down the Windows key and press R to open the «Run» dialog box. Type in «msinfo32» and press Enter.

Картинка с сайта: www.share-tools.com

Step 2: Under the «System Overview» menu, click on «Components.» In the sub-menu, click on «Storage,» then select «Disks.»

Step 3: Check the value under «Partition Start Offset«. If it can be divided by 4096 without any remainder, then your disk is 4K-aligned.

If you discover that your SSD is not aligned, refer to the second method for a fix.

Step 2: Run 4K alignment

Welcome to the crucial stage of 4K alignment, which can significantly boost your SSD performance. Let’s introduce you to the powerful tool called Partition Master, which provides essential support for effortless 4K alignment. With its user-friendly interface and excellent compatibility, it ensures a smooth experience for users of all levels, whether you’re a novice or an expert. The interface is designed to guide you seamlessly through the alignment process.

So, download the tool Partition Master and proceed as follows:

Step 1: Click on «Toolbox» and then choose «4K Alignment».

Step 2: Select the disk that you want to align. Click the Start button.

This is an embed code for a YouTube video that displays a full-screen player with permissions for accelerometer, autoplay, clipboard-write, encrypted media, gyroscope, and picture-in-picture. The video ID is «JRAoYrNzlgo», and the player has a width of 700 pixels and a height of 410 pixels. It also has the attribute «allowfullscreen» set, and the frameborder is set to «0».

Solution 4: Replace the SSD with a new one

Unfortunately, if all the solutions fail, or your SSD is physically damaged, there is no other option but to get a new SSD. So, after getting a new SSD, the first thing you would worry about is saving your data and programs. Don’t worry, in this case, the Partition Master tool can help you replace the frozen SSD with a new one without losing any data. Because the Partition Master tool has the disk cloning feature that can save all the data on your old SSD/HDD and transfer it to the new disk, injecting new life into your system.

Let’s explore how to use this essential tool and its cloning feature to clone a disk:

Step 1: Select the source disk.

From the left menu, click «Clone.» Choose «Clone system disk» or «Clone data disk,» then click «Next.»

Select the source disk, then click «Next.»

Step 2: Select the target disk.

Select the desired HDD/SSD as the target disk and click “Next” to proceed.

Read the warning message and confirm by clicking the “Yes” button.

Step 3: Look at the disk layout and edit the target disk partition sizes.

When prompted that all data on the target disk will be erased, click “Continue” (make sure to back up any important data on the target disk beforehand).

Here, you can choose to “Automatically adjust the disk size,” “Clone as the source disk,” or “Edit disk layout.” (If you want to allocate more space for C drive, choose the last option.)

Click “Start” to begin cloning the disk.

This tool has other features. See the list below:

• Check SSD health status and temperature
• Clone SSD to a larger SSD
• Clone an SSD with bad sectors
• Upgrade HDD to SSD
• Test SSD read/write speed

Don’t hesitate to download this tool to check your SSD’s performance and take good care of your SSD.

Why Does a Solid State Drive Cause Windows 10 to Freeze?

If you’re experiencing SSD freezing issues while using Windows 10/11, understanding the root cause can help you find an effective solution. In this section, we’ll explore the possible reasons behind this mysterious problem:

SATA connection error: Freezes can occur if your SSD is connected to the wrong SATA port.

AHCI mode not enabled: SSD performance might be reduced if AHCI mode is not enabled.

Your SSD is not 4K-aligned: If your SSD is not properly aligned with 4K sectors, it might also cause freezing.

Physically Damaged SSD: Physical damage can also lead to awful freezing issues.

And please share this article with others to help them quickly get rid of this frustrating and annoying problem.

The Chinese character » » translates to «Non-breaking space» or «Solidus» in English. In web encoding and text editing, it is used to insert an invisible space that prevents words or characters from breaking onto a new line.

Conclusion

When you encounter SSD freezing issues on Windows 10/11, try the four methods above to unfreeze your SSD. It’s also crucial to understand the reasons behind the freezing to apply the right and relevant solutions. With the help of this article, you now know the causes of SSD freezing and how to fix them. Share this article with others as it can help them resolve the issue as well.

«Frequently Asked Questions about SSD Freezing Issues»

An SSD freezing can be frustrating, especially when you’re in the middle of a project or game. If you have more questions about why your SSD might be freezing, check out the FAQ below.

Why does my solid state drive frequently freeze?

Your SSD might freeze due to an incorrect SATA connection, disabled AHCI mode, or improper 4K alignment. Identifying the root cause is crucial for applying the right solution.

< strong > 2. Can a faulty SSD cause a computer to freeze?

Yes, a malfunctioning SSD, whether due to physical damage or internal issues, can cause freezing problems with your computer.

3. How to fix my SSD drive crash issue?

First, identify the underlying issue. It could be a 4K alignment problem, an AHCI mode issue, or a faulty connection causing the SSD crash. Follow the steps in our guide to apply the corresponding solutions.

Many users migrate their Windows OS to SSD in pursuit of high-speed performance. Although SSD is very fast, it is inevitable to encounter the SSD freeze-up issue sometimes. Don’t worry, this article from Partition Magic shows you four ways to resolve SSD freezes.

Why Does SSD Freeze-up on Windows 10/11

Solid state drives (SSD) and hard disk drives (HDD) are both data storage devices. SSDs store data in flash memory, while HDDs store data in magnetic disks.

Compared to HDD, SSD is a newer technology. It uses integrated circuit assemblies as memory to store data, with many advantages, including faster speeds, lower power consumption, and better gaming experience. Therefore, nowadays, more and more people choose to install or migrate their OS to SSD to improve the performance of their PCs.

However, some people complain that their SSD keeps freezing Windows 10/11. Why does this happen? Listed below are 4 reasons that may cause SSD freeze.

• Misplaced SATA connection: There are 3 types of SATA ports for SSD and different ports have different data transfer ability. If your SSD is connected to the wrong SATA port, it can lead to freezing up.
• AHCI mode is not enabled: AHCI is the newest mode for storage devices. If the AHCI mode is not enabled, your SSD performance may slow down.
• SSD is not 4K aligned: 4K alignment refers to aligning the physical disk partition with the PC logical partition to ensure the read and write efficiency of the hard drive. If your SSD is not 4K aligned, the SSD freezes for a few seconds.
• SSD physical damage: If your SSD disk is physically damaged, it may also cause the SSD lock up.

The following are 4 effective ways to solve the “SSD freezes for a few seconds” problem. You can try them one by one until the issue gets solved.

Way 1: Check If the SSD Is Connected Right Port

SATA ports are designed for data transfer. There are 3 types of SATA ports, called SATA I, SATA II, and SATA III. Different ports have different data transfer capabilities. The upper limit of SATA I is 150 MB/s, the upper limit of SATA II is 300 MB/s, and the upper limit of SATA III is 600 MB/s. Since SSDs have fast write and read speeds, they need to be connected via SATA III ports.

If the SSD is connected to a SATA II port, there is a high chance that the read and write speeds will be reduced and the SSD will not be able to reach its potential, which may cause the SSD to freeze.

So, when you encounter the SSD freeze problem, the first thing to do is to check if the SSD is connected to the right port.

Way 2: Enable the AHCI Mode

AHCI (Advanced Host Controller Interface) is a new modern mode for memory devices. In this mode, computers can take advantage of SATA, such as faster data exchange with SSDs and HDDs and hot swapping of hard disks. Enabling AHCI can significantly improve file access speed and overall PC performance.

Currently, AHCI mode is basically enabled by default on mainstream motherboards. However, for a few motherboards and previous old motherboards, the default is to manually change to the AHCI option through BIOS settings.

To enable AHCI, you can enable it somewhere in the BIOS setup. If you do not enable AHCI mode, your SSD may freeze-up. That is to say, you may not have enabled AHCI mode before installing the operating system to the SSD. Therefore, it is recommended that you enable this mode before installing the operating system.

If you don’t know that your PC has AHCI mode enabled, don’t worry. The steps below will tell you how to know which mode your computer’s controller is using.

Step 1: Press the Win + X key to open the Device Manager.

Step 2: Click the section IDE ATA/ATAPI controllers.

Картинка с сайта: www.partitionwizard.com

Step 3: As shown in the figure below, if a device contains AHCI in its name, it means that AHCI mode is being used in this computer.

Картинка с сайта: www.partitionwizard.com

If you forget to enable AHCI mode for SATA on a computer with Windows installed, you can enable AHCI by following the steps below. Windows will work normally and the SSD will not freeze again.

However, you’d better back up important files and data before the operation to avoid any unexpected errors during the operation that may lead to data loss. Let’s take a look at how to do it step by step.

Step 1: Press the Win + R key to open the Run Window. Then type in the command regedit and press Enter to open Registry Editor.

Step 2: Go to the path HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\iaStorV.

Step 3: Double-click on the Start element and set its Value data to 0 (zero).

Картинка с сайта: www.partitionwizard.com

Step 4: Go to the path HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\iaStorV\StartOverride and set the zero Value data for the 0 element.

Step 5: Go to the path HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\storahci. Then double-click the Start element and set the Value data to 0 (zero).

Step 6: In the subsection, HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\storahci\StartOverride set the zero Value data for the 0 element. You may see nothing if you have enabled AHCI. But if AHCI has not been enabled yet, you will see it.

Step 7: Close Registry Editor.

Step 8: Restart your computer and enter UEFI or BIOS. In UEFI or BIOS setup, find SATA to select the mode of memory devices. Switch them to AHCI, save the settings, and restart your computer.

Step 9: When Windows finishes installing the SATA drivers, it will ask you to reboot again. Doing this will enable AHCI mode in Windows.

Way 3: 4K Align SSD

4K alignment is one of the important factors that affect the read and write speed of SSD. If the SSD is not 4K aligned, the speed of the SSD will be seriously affected and cause problems such as SSD freezing.

When you migrate the Windows operating system from a mechanical hard drive to a solid-state drive, the partition may not be aligned correctly. This may be the reason for the SSD freezing, which will affect the computer’s running speed, performance, etc. But don’t worry, it is very simple to 4K align the SSD using the third-party software MiniTool Partition Wizard.

MiniTool Partition Wizard is a free disk partition software specially designed to manage partitions and disk usage without causing any damage to the original data. It provides the Align All Partitions function to fix SSD lock up. What’s more, it can handle various disk and partition jobs, such as convert MBR to GPT, format SD card FAT32, hard drive clone, etc.

To 4K align your SSD and resolve SSD freezing Windows 10/11 with MiniTool Partition Wizard, refer to the following content. First click the button below to get this free partition manager, and install it on your PC.

MiniTool Partition Wizard FreeClick to Download100%Clean & Safe

Step 1: Run MiniTool Partition Wizard to its main interface. Right-click on the SSD that needs to be aligned and select Align All Partitions. Alternatively, you can select the disk you want to align and click the Align All Partitions feature in the left pane.

Картинка с сайта: www.partitionwizard.com

Step 2: MiniTool Partition Wizard will tell you how many partitions you need to align. Click Yes to continue.

Step 3: Finally, click Apply to make the operation effective. If the partitions on your disk are aligned, you may see the “This disk does not need to change partition alignment. All partitions are already aligned” message pop-up.

Way 4: Replace Your Computer with a New SSD

As mentioned above, your SSD may be physically damaged if it freezes from time to time. In this case, a feasible solution to the problem is to replace the damaged SSD with a new one.

You can do this by using the Copy Disk feature with MiniTool Partition Wizard. Fortunately, this feature can transfer the entire data from the damaged disk to the new one without having to perform a Windows installation from scratch. This will save you a lot of time and keep your operating system and files the same as in the original location.

MiniTool Partition Wizard DemoClick to Download100%Clean & Safe

Now, you can follow the steps below to copy everything on the problematic disk to the new SSD.

Step 1: Connect your new SSD to your computer (via SATA for desktops or USB to SATA adapter cable for laptops).

Step 2: Run MiniTool Partition Wizard to its main interface. To clone SSD, right-click on the disk that needs to be cloned and select Copy.

Картинка с сайта: www.partitionwizard.com

Step 3: In the new pop-up window, select the target disk where the copied data will be saved. Then click the Next button.

Картинка с сайта: www.partitionwizard.com

Step 4: In this interface, a warning will appear telling you all the data on the disk will be destroyed. To perform the cloning operation successfully, click the Yes button.

Картинка с сайта: www.partitionwizard.com

Step 5: Select a copy option and click Next.

• Fit partitions to entire disk: Fill all disk space on the target disk in proportion to the partition size.
• Copy partitions without resizing: Keep original partition size. Available only if the destination disk is not smaller than the source disk.
• Align partitions to 1MB: This can improve the performance of the target disk if it is an SSD.
• Use GUID Partition Table: It can support disk larger than 2TB.

Картинка с сайта: www.partitionwizard.com

Step 6: Read the note carefully which shows how to boot from the target disk, and click Finish to go back to the main interface.

Картинка с сайта: www.partitionwizard.com

Step 7: MiniTool Partition Wizard will return to its main interface. Here you can preview all the changes you want to clone a new SSD. Click Apply to make the operation effective.

Картинка с сайта: www.partitionwizard.com

I have some troubles with my SSD. Thanks to this article, 4 methods are introduced to solve the problem of SSD keeps freezing. If you also want to solve the problem of SSD freeze-up without losing data, you can also read this article, which is very helpful to you.Click to Tweet

Bottom Line

This is the end of the article. When you encounter SSD freezing Windows 10/11, you can take the above methods to solve it. If you have tried the first three methods in this article and they don’t work, the most direct way is to replace your computer with a new SSD.

Don’t worry about data loss and other issues when replacing your computer with a new SSD. You can copy everything including Windows 10 to your new SSD by using MiniTool Partition Wizard. This software is very convenient and powerful.

If you have any questions or suggestions while using MiniTool Partition Wizard, you can contact us via [email protected] to get a quick reply.

SSD Freeze-up FAQ

Many users are slowly migrating from using HDDs to SSDs, the reason is simple – SSDs start up a Windows 11/10 computer quickly. But slow SSD read/write speed problems are very much real.

If your device contains a Solid-State Drive (SSD), you may have perhaps noticed that as it fills up, its performance falls dramatically. You will notice that opening applications and copying files will take longer than usual, and sometimes, this will also cause freezing issues, making your device tougher to use.

SSD is the short form for a solid-state drive; it is a storage device that has gained immense popularity in recent times. It adopts integrated circuit assemblies to help people store data for good. However, several factors can be responsible for the slow SSD read or write speed on Windows 11/10 or other operating systems. These include:

• Low Space
• TRIM command is disabled or doesn’t exist
• AHCI mode is disabled
• The Boot sequence is incorrectly configured
• Computer or SSD is infected with viruses
• BIOS/firmware is outdated
• Something is wrong with the SATA port or cable
• Low RAM.

These were the most common reasons for the SSD’s decline in speed and performance.

TIP: Test your Read-Write speeds using CrystalDiskMark or Parkdale.

It can be hard to pinpoint the exact problem your system may be facing. We will list some tips that will hopefully get your SSD up and running again.

1. Free up space to improve performance
2. Make sure the TRIM command is running
3. Enable AHCI mode
4. Choose high-performance mode
5. Optimize your SSD
6. Update Firmware of the SSD
7. Configure correct Boot order
8. Check your SATA port
9. Check your SATA cable.

Let us look at these solutions in more detail.

1] Free up space to improve performance

Картинка с сайта: www.thewindowsclub.com

The less space on your SSD, the slower it will perform. If your SSD is at 90 percent capacity or higher, and you notice some performance issues, at this point you should first try and clear up some space. The most obvious thing that you can try is to start deleting unnecessary files and folders from SSD that may be occupying the space.

Another idea that works is to disable hibernation, as this could free up a lot of disk space for you. Follow these steps:

• Open ‘Command Prompt’ from ‘Windows Search’.
• Type ‘cmd’
• Right-click on the top search result and choose command prompt with administrative rights i.e., select the option ‘Run as administrator’
• Type powercfg -h off
• Hit ‘Enter’

Once you followed the steps mentioned above to clear off some space in your SSD. Check if there have been any improvements in the SSD read/write speed. If it didn’t work, move on to the next solution.

Related: How to protect Solid State Drive and extend SSD life.

2] Make sure the TRIM command is running

Картинка с сайта: www.thewindowsclub.com

An SSD drive will run slow if the TRIM command is not running. Follow these steps to make sure the TRIM is enabled.

• Click ‘Start’ and type ‘cmd’
• Right-click ‘Command Prompt’ and hit ‘Open as Administrator’
• Copy and paste the command – fsutil behavior query DisableDeleteNotify
• Press ‘Enter’
• Now, if you get ‘0’ as the result, it means TRIM is enabled and if you get ‘1’ it means disabled. Move on to the next step if you get ‘1’ in the result.
• Type fsutil behavior set DisableDeleteNotify 0
• Hit Enter.

This will enable TRIM command on your system.

NOTE: If you run the command now in Windows 11, you will see it displayed as follows – but it means the same thing.

Картинка с сайта: www.thewindowsclub.com

The value 0 has been described as Allows TRIM operations to be sent to the storage device.

3] Enable AHCI mode

Картинка с сайта: www.thewindowsclub.com

The Advanced Host Controller Interface (AHCI) specifies the operation of Serial ATA (SATA) host controllers in a non-implementation-specific manner in its motherboard chipsets. The specification describes a system memory structure for computer hardware vendors to exchange data between host system memory and attached storage devices. This mode is very crucial for you to get the best out of the SSD; if it’s not enabled, your SSD will run slow. You can easily enable AHCI in Windows.

4] Choose the Power high-performance mode

This is a quick potential fix. Try changing to the Power high-performance mode by following the steps below:

1] Search for ‘Power & Sleep settings’ in the ‘Start’ menu

2] Scroll down the right-side options and click on ‘Additional power settings’ under ‘related settings’

Картинка с сайта: www.thewindowsclub.com

3] In the ‘Power Options’ window click on ‘Create a power plan’ appearing on the left-side menu

Картинка с сайта: www.thewindowsclub.com

4] Now select ‘High Performance’ and click ‘Next’

Картинка с сайта: www.thewindowsclub.com

In Balanced Power Plan, your SSD doesn’t receive the full power it needs to run at its best capacity, on the other hand, the High-performance plan favors performance.

Read: Do you need to defrag SSD?

5] Optimize your SSD

Картинка с сайта: www.thewindowsclub.com

After some time of using an SSD, especially after installing many applications, it is recommended to optimize SSD. Follow these steps:

• Search for ‘Defrag’ in the ‘Start menu’
• Select Defragment and Optimize Drive
• Select the SSD drive and click ‘Optimize’

Optimizing it from time to time helps bring it back to its original state.

Read: Optimize and speed up your SSD drive using Tweak-SSD.

6] Update Firmware of the SSD

Картинка с сайта: www.thewindowsclub.com

Just like other hardware, SSD manufacturers release patches and updates periodically for SSDs too. The firmware of SSDs is essential for running them smoothly and efficiently, so remember to keep checking for a firmware update. To update your SSD, follow these steps:

• Press ‘Win + R’ keys to open the ‘Run’ dialog box.
• In the ‘Run’ dialog, type ‘devmgmt.msc’
• Hit ‘Enter’
• In the ‘Device Manager’ windows locate ‘Disk drives’ and click on the arrow and expand it.
• Right-click on the SSD and click ‘Update Drivers’
• You will be prompted for options on ‘How do you want to search for drivers?’ Click on ‘Search automatically for drivers’.

Windows will now search for any new updates available for your SSD and install them. Once the process is completed. check if your issue is resolved.

Read: SSD Optimization Tips for better performance.

7] Configure correct Boot order

Картинка с сайта: www.thewindowsclub.com

Another reason an SSD drive is slow could be that the boot sequence is wrongly configured. If the first priority is given to the hard drive, instead of SSD, the computer will run slow. This Windows guide will show how you can boot into Windows 10 firmware settings (UEFI/BIOS), and change the boot order easily.

8] Check your SATA port

These days, most motherboards contain SATA 3Gbps/ SATA 6Gbps ports. The speed of the port depends heavily on the SSD’s performance. It can be difficult to identify the SATA Port; hence, you must refer to the motherboard’s manual to determine it correctly. Typically, motherboards made on Intel chipsets contain an Intel SATA controller. This controller has the highest speed, so the boot device should be connected to this one only.

Read: Increase Data Transfer Speed in External Hard Drive

9] Check your SATA cable

One more reason for poor SSD performance is a poor-quality or defective SATA cable. So, check to confirm if the state of the cable is fine. Also, it is advised that you purchase a SATA cable only from a well-known manufacturer.

Along with the above, you could try increasing your RAM or completely formatting your SSD—these tricks also help fix slow SSD read or write speed on Windows 10.

Your SSD can become slow for various reasons, but when that happens act immediately and rescue your data because the SSD may corrupt at any time and you may lose all your valuable data.

Related read: How to increase Hard Drive speed & improve performance.

Don’t panic if your SSD not showing up on your computer. There are four common cases, and check the corresponding solution below to get rid of the issue with ease.

Are your hard drives, new or old, internal or external, not showing up in File Explorer or Disk Management? Follow along to learn how to fix the hard drive not showing up in Windows 11/10/8/7 without losing data.

«I recently installed a Samsung SSD on my Windows 10 computer, but I find it not showing up under My Computer where the other hard drive is present. Is there any way to display the SSD?»

«I got a new M.2 SSD from Intel. When I connected it to my PC, it did not show up in the File Explorer or Disk Management. I don’t know where goes wrong. Please help.»

The above user stories tell the same thing that happens to a Solid State Drive (SSD) — your drive does not show up as other connected hard drives. In Windows 10 and earlier Windows operating systems, an external storage device not detected issue would throw people into frustrating situations. They can’t add files and content to the SSD, nor can they access its existing data. Therefore, the biggest concern is how to fix the ‘SSD not showing up’ problem quickly and easily.

Get Data Off Your SSD with Data Recovery Software

We will introduce all seven methods to fix SSD not showing in Windows 10 or 11, and you can try to fix the issue accordingly. Some solutions may cause data loss, and you’d better download EaseUS Data Recovery Wizard Pro when necessary to recover SSD data from an inaccessible/formatted Solid State Drive.

SSD data recovery is necessary when the SSD stores important files and folders of your work or family. EaseUS professional SSD recovery tool can help you recover deleted photos from hard disks, and you can also restore lost documents, emails, audio, and videos from SSD.

You can easily get data off your SSD with the following tutorial. If your SSD is an external one, remember to connect it to your computer in advance:

Step 1. Launch EaseUS SSD recovery software on the PC, select the internal SSD or external SSD, and scan the disk.

Картинка с сайта: www.easeus.com

Step 2. During the scanning, you can also filter the SSD data. Choose the file type you want to recover; finding target files will be easier with the Filter option.

Картинка с сайта: www.easeus.com

Step 3. You can preview the videos, pictures, or documents before recovering them. Click «Recover» and save these recovered SSD files to another disk.

Картинка с сайта: www.easeus.com

Do you think the EaseUS data recovery tool is helpful? Please share this passage on social media to help more SSD users!

Case 1. Solve All SSD Issues with Data Recovery Services

You can choose to fix NVME/M.2 SSD not showing up or other SSD issues with a professional disk repair service. We provide you with an effective manual disk repair service. You can repair your SSD errors with simple clicks. Contact EaseUS data recovery services and get help as soon as possible.

If you want to solve not showing issue by yourself, we’ll offer more solutions and written tutorials. If you prefer a video tutorial to fix SSD not showing in Windows 11/10/8/7, you can watch this video to fix SSD, hard drive, and USB drive not showing up.

⌛Time Stamps:

• 00:15 Method 1. Assign Drive Letter
• 01:05 Method 2. Initialize Disk
• 01:35 Method 3. Corrupted File System
• 02:38 Method 4. Windows Driver Issue

Картинка с сайта: www.easeus.com

Case 2. SSD Not Showing Up Because the Drive Letter Is Missing

Sometimes, your SSD does not show up because the drive letter of the SSD is missing or conflicting with another disk, and the Windows OS cannot recognize it. You can solve this problem by manually assigning the SSD a new drive letter in Windows Disk Management.

To assign the SSD a new drive letter, follow these steps:

Step 1. Right-click on «This PC» and select «Manage». Under the Storage section, click «Disk Management».

Step 2. Right-click on the SSD partition and select «Change Drive Letter and Paths…».

Step 3. Among Add, Change, and Remove, click the «Change» button, and then select a drive letter from the list. Click «OK» to confirm.

Картинка с сайта: www.easeus.com

Case 3. SSD Not Showing Up Because It is Not Initialized

If you get a new SSD and it won’t show up in Windows Explorer, it’s likely in the «uninitialized» state. You must initialize a disk before Logical Disk Manager can access it.

Also, if an old SSD shows the «disk unknown not initialized» error, the reason is the same. In these two situations, to fix the problem, you can try to connect the SSD to another working computer to check if it reports the same error. Otherwise, you will need to initialize the SSD in Windows 10.

Картинка с сайта: www.easeus.com

To initialize an SSD, follow these steps.

Step 1. Open Disk Management on your computer. 

Step 2. Find and right-click the SSD you want to initialize, and then click «Initialize Disk».

Step 3. In the Initialize Disk dialog box, select the disk(s) to initialize. You can select whether to use the master boot record (MBR) or GUID partition table (GPT) partition style.

Картинка с сайта: www.easeus.com

You may also want to know if initialize the SSD erases data or not. Check this passage to learn more:

Case 4. SSD Not Showing Up Because the File System Is Not Supported

You need to think further if the above three methods do not work. One assumption is that the file system has corrupted or Windows does not support the current file system.

As investigated, the relevant file system issues are mainly displayed as «RAW», «Free space», or «Unallocated space». Reformatting the disk would be enough to fix the file system issues or RAW drive.

Step 1. Right-click the Windows icon to bring up the tool menu, and click «Disk Management».

Картинка с сайта: www.easeus.com

Step 2. Right-click the target SSD and choose «Format», then you can perform a quick format.

Картинка с сайта: www.easeus.com

Case 5. SSD Not Showing Up Because of Disk Driver Issues

Another possible situation is that the SSD is detected but not displayed in «My Computer». This is because the disk drive is not installed correctly. So, you can try to reinstall the SSD driver to check if this helps fix the SSD not detected issue. 

Step 1. Right-click on «This PC» and select «Manage». Under the System Tools section, click «Device Manager».

Step 2. Go to Disk drives. It should list the storage devices that you have connected to your PC.

Step 3. Right-click the SSD and choose «Uninstall device».

Step 4. Remove the SSD and restart your system. Try to connect the SSD again to check if Windows 10 detects the SSD as normal.

Картинка с сайта: www.easeus.com

Case 6. SSD Not Showing Because Of Disk Issues

Sometimes, the unknown disk issues can cause many unexpected problems and even cause your SSD not to show on your computer. If you don’t want to go to the local store to repair the SSD, you can try Windows’s built-in repair utility first.

Step 1. Open the Windows Settings window by pressing the Windows and I keys.

Step 2. You can search for the Troubleshoot settings in the search box. Find «Hardware and Devices» and click «Run the troubleshooter».

Картинка с сайта: www.easeus.com

After learning six methods, you may have solved your SSD problem already. Don’t forget to share these methods with your friends!

Case 7. SSD Not Detected Because Of Wrong BIOS Settings

Sometimes, it’s nothing happens to your SSD when it is not showing up on your computer, just the wrong BIOS settings. You can change the BIOS settings to make your SSD detected by the Windows operating system again.

Step 1. To access the BIOS setup, restart your computer and press the specified key (F2) or other keys like F10 or Del. During startup, click the Enter key.

Step 2. Next, open the BIOS settings and find the «Storage Configuration» section.

Step 3. Find the SATA controller mode setting and adjust it to IDE.

Картинка с сайта: www.easeus.com

After learning all the possible methods, you may also be interested in the following passage to fix the Crucial SSD not detected issue:

Conclusion

SSD and any other form of storage media are prone to mechanical failure and physical damage. You need to make advanced plans to safeguard the data on these storage drives. Making a backup is always a wise decision. It’s never too late to take action to save a copy of hard drive data to another safe location, like a backup drive, cloud, or network drive.

To summarize, we offered appropriate fixes regarding SSD not showing up in Windows 10 or 11. We recommended the assistive tool — EaseUS Data Recovery Wizard to recover lost data from inaccessible and formatted hard drive/partition.

SSD Not Showing FAQs

To conclude the guide, we have selected some of the most asked questions about SSD not showing up problems in Windows. These questions and their answers are.

1. Why is my SSD not showing up?

Driver issues are one of the major reasons. Like a hard drive, the SSD is often detected but not showing up in My Computer because the disk driver is not installed properly. So, you can try to reinstall the SSD driver to check if it helps fix the issue.

2. How do I get my new SSD to show up?

If you get a new SSD and it won’t show up in Windows Disk Management, it’s likely in an uninitialized state. You must initialize a disk before the Logical Disk Manager can access it.

3. How do I fix SSD not detected in BIOS?

To get BIOS to detect the SSD, you need to configure the SSD settings in BIOS as follows.

• Restart your computer, and press the F2 key after the first screen.
• Press the Enter key to enter Config.
• Select Serial ATA and press Enter.
• Then you’ll see the SATA Controller Mode Option.
• Save your changes and restart your computer to enter BIOS.