Драйвер контроллера sata ahci ssd для windows 10 asus

На этой странице вы можете бесплатно скачать ASUS H110M-D D3 Intel AHCI Драйвер Path v.14.8.0.1042

Похожие файлы:

Install/Update Process :

— Press Windows key + X > Device Manager > Right-click on your ASMedia SATA device > Update driver > Browse my computer for driver software
— Browse… > Select the extracted drivers folder (SATA_AHCI-RAID_ASMedia_v…) > Next

TIPS :

If you want to manage the drivers (remove old/unused drivers for example) that you have in your Windows DriverStore
Use Driver Store Explorer (Right click on «Rapr.exe» > Run as administrator).

If you want better interrupts delivery latency
Enable MSI (Message Signaled-based Interrupts) mode on all your supported devices (see the column «supported modes») with
MSI Mode Utility (Right click on «MSI_Mode_Utility_v3.exe» > Run as administrator).

[INDEX] All My Drivers/Firmware/Software Threads
[ALTERNATIVE INDEX] All My Drivers/Firmware/Software Threads

Jun. 23, 2022 / Updated by
Helia to
Windows Driver Solutions

SATA AHCI driver is crucial if you want to install Windows in AHCI mode instead of IDE. AHCI (Advanced Host Controller Interface) makes NCQ (Native Command Queuing) as well as hot-plugging or hot swapping through SATA (Serial ATA) host controllers possible. Before you enable AHCI mode in BIOS/UEFI, make sure you’ve download and install correct AHCI driver.

How to Download and Install SATA AHCI Driver on Windows OS

If you are not sure whether there is SATA AHCI driver installed, or if you encounter driver problems when installing the AHCI driver, don’t worry. This tutorial will show you how to download and install the SATA ACHI driver.

Way 1: Download and Install SATA AHCI Driver Manually

1. Download the AHCI driver from the Internet.

For example, if you are going to install Asus AHCI driver for windows 10, you can go to the Asus support page and download the exact SATA AHCI driver you need. You can also download the driver elsewhere, but make sure the driver is digitally signed in case Windows 10 Anniversary driver signature issue occurs (if your Windows OS is a clean install of Windows 10 Anniversary).

Read More: How to Check Unsigned Drivers on Windows 10

2. Install the Driver

Use Windows shortcut keysWin + X to launch the Jump List and select Device Manager. And then expand the IDE ATA/ATAPI controllers entry. Navigate to your SATA AHCI controller, which is the device you are going to install the driver on. Right click on it and select Update Driver Software.

Картинка с сайта: www.drivethelife.com

Click Browse my computer for driver software.

Картинка с сайта: www.drivethelife.com

And then click Let me pick from a list of device drivers on my computer.

Картинка с сайта: www.drivethelife.com

Choose the model from the box, and then click Have disk.

Картинка с сайта: www.drivethelife.com

Click Browse to locate the SATA AHCI driver file you’ve stored, and then click OK to install the driver.

After you finish the installation, restart the computer to make the driver take effect. Now you can enter the BIOS to enable the AHCI mode.

Way 2: Download and Install SATA AHCI Driver Automatically

Download SATA AHCI driver manually is time-consuming and if you install the driver in an incorrect way, serious PC problems like random restarts, INACCESSIBLE_BOOT_DEVICE error on Windows 10, 100% disk usage, etc. may occur suddenly.

If you want to download and update SATA AHCI driver easily, try the all in one driver update utility, Driver Talent, then you can download and install the driver one time and fix the AHCI driver problem easily.

Download Now

Just click the button above to get it directly and follow the steps below to install the SATA driver quickly.

1. Do a Free Scan for Your Computer

Click Scan to detect whether there exist missing or incorrect configured AHCI driver.

Картинка с сайта: www.drivethelife.com

2. Download and Install the Driver in One Click

Click Update to download proper AHCI driver for Windows. Or click Repair to fix the driver problem instantly.

Картинка с сайта: www.drivethelife.com

3. Restart the PC

Don’t forget to reboot to make the driver changes take effect.

Note:

1. Remember to back up drivers or create a system restore point before any system changes, or windows crashes will annoy you.

2.Below are parts of the SATA drivers for various brands of PCs, and you could click the links to download the drivers manually.

Lenovo ThinkPad X200 Intel SATA AHCI Preinstall Driver 8.9.2.1002 64-bit

Lenovo ThinkPad X200s Intel SATA AHCI Preinstall Driver 8.9.2.1002

Lenovo ThinkPad Edge E445 AMD AHCI Driver 1.3.1.68 for Windows 8 64-bit

Acer Aspire 7339 Intel SATA AHCI Preinstall Driver 10.1.0.1008 for Windows 7 64-bit

Acer Aspire S7-392 Intel SATA AHCI Driver 12.6.0.1033 for Windows 8 64-bit

Acer Aspire V5-573G Intel SATA AHCI Driver 12.5.0.1066 for Windows 8 64-bit

ASUS E2KM1I-DELUXE AMD AHCI Preinstall Driver 3.2.1540.75

Gateway NV79C Intel SATA AHCI Driver 9.5.6.1001 for Windows 7 64-bit

Dell XPS One 24 Intel AHCI Driver 8.5.0.1032 for Vista

For more AHCI drivers, click here.

Hope this helped you install the SATA AHCI driver successfully and you finally can enable the AHCI mode in BIOS. If you have any other Windows issues, check for solutions in Resource Center in this site, or comment below directly please.

Tags:

Recommended Download

Standard SATA AHCI controllers help you utilize more native elements by Windows 10 without learning any new procedures or technology. Each storage media device such as a hard disk, DVD, USB disk, and others are interconnected to your system by the SATA AHCI Controller Drivers. But because of this, it gets difficult for most of us to know how to properly install and configure the Standard SATA AHCI controllers in our systems.

If you are using Windows 10, then you might have faced a SATA AHCI controller driver compatibility problem. Many users who have installed new Windows 10 or upgraded from Windows 7 are facing this issue. This is because old SATA AHCI controller drivers are not compatible with Windows 10.

To fix this issue, you have to download the latest version of the SATA AHCI controller driver for Windows 10.

Let’s understand what is Standard SATA AHCI Controller first.

What is a Standard SATA AHCI Controller?

Advanced Host Controller Interface also called AHCI is a hardware system by Intel for Serial ATA (SATA) host bus adapter and itis used to detect, configure and program SATA/ AHCI adapters in your OS. As AHCI is comparatively new, it’s not compatible with the older ATA which is used in Windows 7. Enabling the AHCI in BIOS or UEFI is very important, especially when you want to install a new Windows 10 with the support of AHCI instead of IDE.

AHCI is a way to use which your storage devices communicate with the OS. IDE also works like AHCI. But As compared to IDE, AHCI runs faster. An old operating system like Windows 7 or XP is using IDE, but Windows 10 is using the new AHCI.

It is always important and recommended to keep the AHCI drivers up-to-date to prevent crashes.

How to Update Standard SATA AHCI Controller

If you have already installed Windows 10 then you have to download the latest Standard AHCI Controller drivers. You can download drivers from the official website or you can use 3rd party driver updater tools.

Follow the below guides to download and install drivers on your Windows 10.

Method 1: Download and Update Drivers Manually

1. First of all you have to go to the manufacturer’s website and download the latest drivers.

2. Once downloaded, save it to the desktop. Now you have to uninstall old drivers.

3. Go To Device manager. (Press Win + X and select Device Manager).

4. Expand the IDE ATA/ATAPI controllers option > Go to SATA AHCI controller > Right-click on it > Click on Update Driver Software.

5. Click on Browse my computer for driver software.

6. Click on Let me pick from a list of devices.

7. Select the Model and Click on Hard Disk. Then browse to Desktop or download location > Select the driver you downloaded above and click on Ok.

Method 2: Update Drivers Automatically

As we mentioned above, you can use advanced driver updater software to download and install the latest version of drivers.

You can use Driver River or Driver Easy. These are the best driver softwares for Windows.

All you have to do is just download them and scan your system for missing and outdated drivers.

They automatically find and list all available drivers which are compatible with your OS version.

Your search resulted in over 1000 matching updates. Only the first 1000 are returned. To narrow your search, try adding additional keywords to your search terms.