Многие пользователи Windows сталкиваются с синим экраном смерти, а именно ошибкой, именуемой — DPC WATCHDOG VIOLATION. И причины возникновения этой ошибки разные. Данная статья предлагает вам 4 способа исправления DPC WATCHDOG VIOLATION с подробными шагами и иллюстрациями.
от Anatoliy | Обновнено 24.04.2023 | от Anatoliy
Что такое DPC WATCHDOG VIOLATION или 0x00000133?
Вышеупомянутая ошибка в последнее время стала досадной проблемой для пользователей Windows. Многие из них столкнулись с проблемой при обновлении операционной системы до Windows 10, чаще всего ощиюка возникает со следующими параметрами увемодления: «DPC WATCHDOG VIOLATION» и кодом ошибки «0x00000133». В данной статье мы собираемся объяснить причины проблемы и предложить несколько эффективных решений.
Каковы причины ошибки DPC WATCHDOG VIOLATIONв Windows 10?
Причинами появления DPC WATCHDOG VIOLATION/0x00000133 в Windows 10 являются в основном три распространенные проблемы:
1. Неподдерживаемая прошивка SSD диска
2. Устаревшая версия драйвера SSD
3. Проблемы с несовместимостью оборудования или повреждение системных файлов
7 способов исправить уже возникшую ошибку «DPC WATCHDOG VIOLATION»
Во-первых, мы должны проверить, связано ли это с обновлением системы:
Поскольку Microsoft не может исправить возникшую ошибку автоматически, пользователи должны принять меры самостоятельно. Постарайтесь вспомнить, обновили ли вы драйверы на своем ПК. Ниже представлен пример, когда ошибка DPC WATCHDOG VIOLATION BSOD/0x00000133появлется при обновлеении системы до Windows 10.
Согласно анализу вышеуказанного уведомления, это может быть вызвано несовместимостью драйверов — iastor.sys. Такую ситуацию можно объяснить неполной совместимостью iastor.sys и Windows 10. Microsoft неприрывно работает над эффективным решением, чтобы избежать несовместимости драйверов при обновлении до Windows 10 и более поздних версий ОС. Но если вы уже обновились и столкнулись с проблемой DPC WATCHDOG VIOLATION BSOD, вы можете попробовать следующие шаги, чтобы заменить проблемные драйверы с помощью Microsoft storahci.sys, тем самым продолжив использовать свой компьютер.
Первый способ — Проблема в диспетчере устройств.
Для устранения данной причины нужно выполнить следующие шаги:
Шаг 1. Win + X, чтобы открыть «Диспетчер устройств»;
Шаг 2. Разверните «Контроллер IDE ATA/ATAPI»;
Шаг 3. Выберите контроллеры с «SATA AHCI» в названии (например, стандартный контроллер SATA AHCI). Чтобы убедиться в том, что вы выбрали, щелкните правой кнопкой мыши контроллер, выберите «свойства», нажмите «драйвер» и «подробности» для проверки, затем нажмите «ОК»;
Шаг 4. В разделе «Драйвер» выберите «Обновить драйвер»;
Шаг 5. «Найти драйверы на этом компьютере»;
Шаг 6. «Выбрать драйвер из списка доступных драйверов на компьютере»;
Шаг 7. «Стандартный контроллер SATA AHCI»;
Шаг 8. «Далее» и «Закрыть», затем перезагрузите компьютер.
Второй способ — устаревшие/несовместимые драйверы SSD.
Относительно старые драйверы SSD несовместимы с системой Windows 8. В этом случае пользователям необходимо обновить компоненты драйвера SSD на официальном сайте производителя. Помните, что вы должны выбрать правильную версию драйвера и следовать интрукциям производителя.
Третий способ — проблема возникает при работе в VMware workstation 8.
Некоторые пользователи застряли на этапе установки VMware workstation 8. Решение проблемы в такой конфигурации простое и эллегантное, а именно удаление звукового и сетевого драйверов.
Четвертый способ — редакторование реестра
Одним из методов решения проблемы является изменение/создание специальных ключей в реестре. В данном случае мы включим игнорирование событий, из-за которых появляется ошибка, следуйте следующим шагам:
1. Нажмите комбинацию клавиш «Win+R» и пропишите в поле команду regedit, после чего нажмите «Enter».
2. В левой части открывшегося окна перейдите по следующему пути: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\WHEA\Policies Обратите внимание, что папка «WHEA» может отсутствовать в каталоге «Control». В таком случае, находясь в нем («Control»), нажмите правой кнопкой мышки и выберите из контекстного меню пункт «Создать», а затем «Раздел». Присвойте ему имя «WHEA».
3. Аналогичными образом создайте папку с именем «Policies» в каталоге «WHEA». Будьте внимательны, так как папки должны быть вложенными, а не идти в одном списке.
4. Затем кликните ПКМ на каталоге «Policies» и выберите в меню строку «Создать», а потом «Параметр DWORD (32 бита)». Присвойте ему имя «IgnoreDummyWrite».
5. Откройте созданный файл двойным нажатием левой кнопки мышки. В поле «Значение» пропишите «1», а затем нажмите «OK».
Теперь закройте окно «Редактора реестра» и перезагрузите компьютер. Если же это не исправит ошибку, советуем удалить созданные файл и папки.
Пятый способ — восстановление файловой целостности
Этот метод позволит проверить системные файлы и восстановить их в случае необходимости. Все действия будут выполняться в «Командной строке» Windows 10. Вам нужно выполнить следующее:
— Откройте меню «Пуск». Левую часть окна прокрутите до самого низа. Откройте папку «Служебные – Windows», а в ней нажмите правой кнопкой мышки на утилите «Командная строка». В контекстном меню выберите поочередно строки «Дополнительно» — «Запуск от имени администратора». Запуск командной строки от имени администратора через меню Пуск в Windows 10
— Теперь нужно ввести по очереди следующие команды:
DISM.exe /Online /Cleanup-image /Restorehealth
sfc /scannow
chkdsk /f
— Учтите, что выполнение каждой операции занимает какое-то время. Рекомендуем не прерывать их и дождаться окончания процесса. Выполнение команд для проверки целостности файлов в Windows 10
По завершении перезагрузите компьютер и проверьте, появляется ли ошибка.
Способ шестой — выключение быстрого запуска
Режим «Быстрый запуск» по умолчанию активирован в Windows 10. Каждый раз при выключении компьютера система сохраняет основную информацию в один файл. При запуске ПК этот файл считывается и все данные из него извлекаются. Это своего рода гибернация. Отключение «Быстрого запуска» в некоторых случаях помогает избавиться от ошибки «DPC WATCHDOG VIOLATION». От вас потребуется выполнить следующее:
1. Нажмите на кнопке «Пуск» правой кнопкой мышки и выберите из открывшегося меню пункт «Управление электропитанием».
2. Перейдите в Управление электропитанием через меню Пуск в Windows 10
3. Далее прокрутите правую часть появившегося окна до самого низа. Кликните там по строке «Дополнительные параметры питания».
4. Опция Дополнительные параметры питания в настройках Windows 10
5. Следующим шагом будет клик по строке «Действия кнопок питания».
6. Переход в меню Действия кнопок питания через настройки энергопотребления Windows 10.
7. После этого нажмите строчку «Изменения параметров, которые сейчас недоступны» в открывшемся окне. Изменение недоступных параметров кнопок питания в настройках Windows 10
Теперь остается лишь снять отметку возле строки «Включить быстрый запуск» и нажать кнопку «Сохранить изменения». Отключение быстрого запуска в Windows 10 Перезагрузите компьютер и попытайтесь воспроизвести действия, во время которых появлялась ошибка.
Седьмой способ — решить проблему с Driver Booster раз и навсегда
Все проблемы связанные с драйверами ПК могут быть решены с помощью Driver Booster, он поможет вам автоматически обновлять драйверы с расширенной базы данных, чтобы состояние драйверов всегда соответствовало наиболее совместимой версии. С Driver Booster вам не нужно тратить много времени на выбор нужного драйвера или загружать и устанавливать драйверы онлайн — просто скачайте и запустите Driver Booster, он автоматически начнет сканировать ваш компьютер. После сканирования вам будет доступен список устаревших драйверов. Затем вы можете обновить все или просто выбрать тот, который хотите обновить.
Между тем, Driver Booster может удалять и создавать резервные копии драйверов внутри программного обеспечения. Даже если вам не нравится последняя версия драйвера, вы также можете создать резервную копию старой версии для установки.
В завершении
Как правило, эта ошибка вызвана неисправным кодом драйвера, который при определенных условиях не завершает свою работу в течение выделенного интервала времени.
Если вы не используете отладчик Windows для этой проблемы, следует использовать некоторые основные методы устранения неполадок.
— Если драйвер определен в сообщении проверки ошибок, чтобы изолировать проблему, отключите драйвер. Обратитесь к производителю за обновлениями драйверов.
— Проверьте системный журнал Просмотр событий на наличие дополнительных сообщений об ошибках, которые могут помочь определить устройство или драйвер, вызывающий проверку ошибки 0x00000133
— Убедитесь, что любое установленное оборудование совместимо с установленной версией Windows. Например, для Windows 10 можно получить сведения о требуемом оборудовании по спецификациям Windows 10.
Часто задаваемые вопросы (FAQ) о «DPC WATCHDOG VIOLATION» и не только
-Что такое DPC WATCHDOG VIOLATION и 0x00000133?
Наш герой DPC WATCHDOG VIOLATION имеет значение 0x00000133 (это связано с синим экраном смерти Windows). Эта проверка ошибок указывает на то, что служба наблюдения DPC была выполнена либо из-за того, что она обнаружила один длительный вызов отложенной процедуры (DPC), либо потому, что система провела длительное время на уровне запроса прерывания (IRQL) DISPATCH_LEVEL или более поздней версии. Значение параметра 1 указывает, превышено ли время ожидания одного DPC или система провела длительный период времени в IRQL DISPATCH_LEVEL или более поздней версии. ЦП не должно выполняться дольше 100 микросекунд, а isR не должно выполняться дольше 25 микросекунд, однако фактические значения времени ожидания в системе задаются гораздо выше. Данная проблема может быть решена с помощью Driver Booster.
-Что такое синий экран смерти (BSOD)?
Как мы описывали ранее в статье Как исправить ошибку Kmode Exception Not Handled в Windows 10 синий экран смерти или BSOD — Синий экран смерти (BSOD) является распространенной и неприятной ошибкой для пользователей Windows. В зависимости от причин, вы всегда можете найти правильное решение и устранить причину появлениея синего экрана смерти.
-Является ли DPC WATCHDOG VIOLATION вирусом?
Нет, DPC WATCHDOG VIOLATION не является вирусом или вредоносным ПО. Это просто ошибка Windows 10, связанная с поврежденными драйверами. Тем не менее, если вы заметили вирусную активность на вашем ПК или хотите обезопасить ПК, пожалуйтса скачайте и установите Advanced SystemCare, который поможет защитить ваш ПК, в тоже время если ваш ПК работает медленно — ознакомьтесь с нашим материалом 25 способов ускорить медленно работающий компьютер актуальных в 2023 году и примените подходящий вам вариант ускорения ПК.
Last Updated :
16 Apr, 2024
On Windows OS, you will find a few issues that can’t be understood by the simple name. The Windows DPC Violation Error is one of them. The Windows DPC Watchdog Violation is a serious Windows BSOD Error that can happen due to many reasons.
This article will discuss the DPC Watchdog Violation Error on Windows along with some solutions to come out of the problem.
What is the Windows DPC Watchdog Violation Problem?
The DPC Watchdog Windows Violation is one of the errors that prompts up at the time of system booting. Now, as the problem is coming up while the system gets started, you can understand that the DPC Watchdog Violation Problem on Windows falls under the Windows Bue Screen Error umbrella.
The term DPC stands for the Deferred Procedure Call & the Watchdog is the Problem Checker that works with the Windows Issue. The most irritating thing is that the Windows Deferred Procedure Call Violation Problem can be seen repeatedly on a single day. Some of the reasons behind the DPC Watchdog Violation Error.
- If the Windows Driver becomes outdated to work properly.
- Corrupted System or Drive files interrupting multiple times.
- Conflicting newly installed applications on the system.
- Conflicting new external devices or systems.
- Windows Core System-related problems.
How to Resolve DPC Watchdog Violation Error on Windows?
If you want to Remove the Deferred Procedure Call Watchdog Violation Error on Windows, the following guidelines need to be executed. We will start with Removing Simple External Cables.
Method 1: Fix DPC Watchdog Violation Error on Windows by Removing Cables
The first simple fix will be to remove every external cable from the device. If you are using a Computer or PC, then you have to remove the cables after the complete Shutdown of the Device.
You even, have to remove the Keyboards & Mouse from the system. If you are using Laptops, then you have to remove the Power Cable as well.
Method 2: Update SATA Drivers
Step 1: On the Windows Symbol, right-click to get the Device Manager option.
Step 2: Right-click on the SATA Driver & go for the Update Driver option.
Step 3: Now, click on the Search For Available Driver option to move ahead.
Method 3: Fix the DPC Watchdog Violation Error by Checking Driver Issues
Step 1: Open the Command Prompt on the Device.
Step 2: The following command will be executed. The command will check the health of all the drives & Disks present on the system.
Command: chkdsk C: /f
Method 4: Remove the Latest Installed App
Step 1: On the Windows Search Bar, search for Remove Application. And go with the Add or Remove App option.
Step 2: Find the application that you have installed recently. Now, click on the Uninstall Button.
Method 5: Scan Run to Detect driver issues
Step 1: In this method, we have to again open the Command Prompt or CMD by searching on the Search Bar.
Step 2: You have to just execute the following command. The command will check every malware-related problem on the Driver & fix it at the same time.
Command: sfc /scannow
Method 6: Fix DPC Watchdog Violation Error on Windows by Window Log Files
Step 1: We have to first open the Windows Run by pressing Windows + R. Now, execute the following command there.
Command: eventvwr
Step 2: Now, from the new window, expand the Windows Logs. And then, click on the Systems. Find out the Driver Name which is marked with the DPC Watchdog Violation Error.
Method 7: Fix DPC Watchdog Violation Error by Resetting Windows
Step 1: Open Windows Settings & go for the Update & Security option.
Step 2: Select the Get Started under the Reset PC Option to move ahead.
Step 3: Click on the Keep My Files option to start the reset process.
In conclusion, we can say that the above-mentioned methods will be enough to clarify How to Resolve the DPC Watchdog Violation Windows Issue without taking any help from the technician. Sometimes, the DPC Watchdog Violation stops to enter into the system. Then, the entire method needs to be fixed with the help of Windows Safe Mode.
-
Признаки ошибки dpc_watchdog_violation
-
Причины возникновения
-
Ошибка dpc_watchdog_violation – что делать
-
Вывод
Среди пользователей операционной системы Windows существует группа ошибок, сопровождаемых появлением сообщений на синем фоне. Их появление ведет к потере несохраненных данных пользователя. Текст с содержанием словосочетания “DPC_WATCHDOG_VIOLATION” является признаком такой ошибки. Данная статья даст Вам ответ на такой вопрос “как исправить DPC_WATCHDOG_VIOLATION Windows”.
Windows 10 “унаследовала” данную неисправность от прошлых версий. Советы по решению проблемы от официального разработчика чаще сводятся лишь к рекомендациям по обновлению системы.
- выскакивает окно с ошибкой, программы прекращают свою работу;
- то же уведомление, но с надписью-кодом ошибки – 0x133;
- возникает полноэкранное уведомление на синем фоне информирующее о неизбежной перезагрузке;
- перезагрузка при запуске программы, с предварительным уведомлением об ошибке 0x133;
- выскакивает уведомление с длинным отрезком текста на английском языке, содержащим то же название ошибки;
- ввод данных с клавиатуры и мыши происходит с задержкой (при исправных устройствах);
- система не отвечает некоторое время (периодически повторяется).
Важно! Уведомления способны появляться последовательно. Важно определить в какой момент возникает самое первое, чтобы потом было легче установить причину.
Причины возникновения
- Устаревшие, поврежденные драйвера и ПО (распространенная).
- Повреждения реестра. Возникают при неправильном удалении программных компонентов Windows.
- Вирусы, трояны и подобные им программы.
- Поврежденный жесткий диск.
- Проблемы с оперативной памятью.
Ошибка dpc_watchdog_violation – что делать
Возможных причин множество, поэтому для восстановления ОС рекомендуется ряд действий. Чтобы исправить ошибку dpc_watchdog_violation, необходимо:
- полное сканирование файлов на компьютере антивирусом. Можно применять утилиты, не относящиеся к антивирусам;
Совет! Используйте утилиты Anti-Malware, Security Stronghold.
- загрузить последние обновления системы с сайта разработчика;
- вернуться к прежней версии драйвера;
- восстановить стандартные настройки BIOS. Только для опытных пользователей;
- выявить возможную неисправность оперативной памяти программой-сканером. Поврежденную линейку требуется заменить;
- провести дефрагментацию жесткого диска;
- использовать функцию восстановления Windows, отменяющую последние изменения;
- удалить временные файлы системы и прочий “мусор”;
Совет! Используйте утилиту WinSweeper.
- проверить работоспособность системы охлаждения в системном блоке, выявить возможные локальные перегревы плат;
- скачать и запустить утилиту для определения причин неисправности – Debugging Tools for Windows.
Вывод
Эта неисправность относится к группе критических ошибок системы, чье появление сигнализирует о серьезных трудностях системы. Если из рекомендованных действий ничего не устранило проблему – единственным выходом станет переустановка операционной системы.
Updated on Apr 28, 2025
DPC_WATCHDOG_VIOLATION is a common BSOD error code in Windows. Before introducing the solutions from EaseUS to the problem, I’d like to explain what a DPC is and why the error arises.
DPC (Deferred Procedure Call) is a Windows utility that monitors unresponsive programs. It helps maintain system stability by ensuring that DPC routines, which are used to handle interrupts from hardware devices, are completed within a reasonable time frame. DPC enables device drivers and other low-level event consumers to arrange their processing reasonably by performing prioritized tasks first and non-critical tasks later.
The Microsoft Windows mechanism that monitors the performance of DPC is called the DPC Watchdog Timer. The DPC Watchdog Time will detect whether a DPC routine or a series of queued DPC routines run for too long. If the DPC routine(s) exceeds the time limit (A typical DPC routine should run at most 100ms), the DPC Watchdog Violation error will occur.
What’s the Cause of the DPC Watchdog Violation Error
The DPC_Watchdog_Violation error is a common issue encountered by many Windows users. This error usually occurs when the Deferred Procedure Call routine takes longer than expected to execute, leading to system instability. Here are the primary causes of this error:
- Outdated or Damaged Device Drivers: Outdated, corrupted, or improperly installed device drivers for hardware components such as graphics cards, network adapters, and storage devices can lead to DPC_Watchdog_Violation.
- Incompatible Hardware: Incompatible hardware that you installed recently might trigger this error in your system.
- Software Conflicts: Conflicts between applications that attempt to use the same system resources can lead to this violation.
- Firmware Issues: Outdated firmware for devices, particularly Solid State Drives (SSDs), can also be a culprit.
- Corrupted System Files: Damage or corruption in system files can prevent Windows from operating correctly, leading to the DPC Watchdog Violation error.
- Windows Update Issues: This problem can be caused by recent Windows update bugs or corruption.
How to Fix DPC Watchdog Violation in Windows 10
Now that you’ve understood why DPC Watchdog Violation might happen, let’s see how to fix this error on your PC.
- Fix 1. Remove External Devices
- Fix 2. Change SATA AHCI Controller
- Fix 3. Update SSD Firmware
- Fix 4. Check and Fix Disk Errors
- Fix 5. Use BSOD Repair Tool
- Fix 6. Uninstall the Recent Windows Update
- Fix 7. Uninstall Recent-Installed Software
- Fix 8. Rollback, Disable, or Uninstall Driver
- Tip
-
If you can’t access the Windows desktop, try entering Safe Mode to fix the problem:
1. Repeat turning on and off your PC three or more times to enter the Automatic Repair mode.
- 2. Go to «Advanced options» > «Troubleshoot» > «Advanced options» > «Startup Settings» > «Restart.»
- 3. After your PC restarts, press 4 or F4 to start in Safe Mode.
Fix 1. Remove External Devices
If the DPC Watchdog Violation BSOD error pops up after you connect an external device to the computer, remove those peripherals and restart your PC.
To identify the cause of the problem, you can connect and check these peripheral devices one by one. If your DPC Watchdog Violation shows up after you connect one of them, remove it from your computer to solve the issue.
Fix 2. Change SATA AHCI Controller
Blue screen errors are usually caused by problematic drivers and the DPC_WATCHDOG_VIOLATION error is usually related to IDE ATA/ATAPI controllers that have the SATA AHCI controller. This driver controls the data exchange between the storage devices and its memory. Changing the driver may help to solve the issue.
Step 1. Type device manager in the search bar and choose «Device Manager» from the result.
Step 2. Expand «IDE ATA/ATAPI controllers».
Step 3. Right-click «Standard SATA AHCI Controller» and choose «Properties».
Step 4. Go to the «Driver» tab and click «Driver Details.»
Step 5. If the driver file name is «storahci.sys,» go back and click «Update Driver.»
Step 6. Choose «Browse my computer for driver software» > «Let me pick from a list of available drivers on my computer» and then select «Standard SATA AHCI Controller.»
Step 7. After the updating, restart the computer to finish the process.
Fix 3. Update SSD Firmware
If the DPC_Watchdog_Violation is due to outdated or incompatible SSD firmware, you should be able to fix the error by updating the SSD driver.
Step 1. Press «Windows» + «X» and open Device Manager.
Step 2. Expand the «Disk drives» section and note down the model number of your SSD.
Step 3. Visit the SSD manufacturer’s website (e.g., Samsung, Crucial, Kingston). Download and launch the appropriate utility tool for your SSD model. It should automatically detect your SSD and install the latest firmware.
If these methods help you resolve the issue, don’t forget to share it with others who might benefit from it.
Fix 4. Check and Fix Disk Errors
If none of the solutions above works, you can create a bootable media using a partition tool like EaseUS Partition Master Professional. It will help you boot your computer into the Windows Preinstallation Environment packaged with disk management utility, with which you can fix disk errors to solve the DPC Watchdog Violation error and clone the disk to rescue your data if the boot issue persists.
You need to create a bootable disk, boot the problematic computer from it, and then follow the steps below to fix the disk errors.
Step 1. Open EaseUS Partition Master on your computer. Then, locate the disk, right-click the partition you want to check, and choose «Advanced» > «Check File System».
Step 2. In the Check File System window, keep the «Try to fix errors if found» option selected and click «Start».
Step 3. The software will begin checking your partition file system on your disk. When it completes, click «Finish».
Fix 5. Use BSOD Repair Tool
Not only can EaseUS Partition Master check disk errors, but it can also be a BSOD repair tool that helps users analyze blue screen errors and offers corresponding causes and solutions. With its Boot Repair feature, you can fix BSOD errors with a few simple clicks.
If your computer is unbootable now, start with Step 1 here. If it’s bootable, move to Step 3 and start the process.
Step 1. Prepare a new PC and create a bootable media with EaseUS Partition Master
- On a new computer, connect an empty USB to your PC.
- Install and launch EaseUS Partition Master, go to the Bootable Media section, select «Create bootable media» and click «Next».
- Select the empty USB or external disk as target disk to create the bootable media for creating a Blue Screen error check tool.
Step 2. Boot PC from EaseUS bootable USB
Then, connect the bootable USB to your PC with Blue screen error, and reboot PC from the USB by configuring it as a boot drive. The process is: restart PC, press F2/F8/F11/Del key to enter BIOS, go to boot menu and configure the USB as boot drive, save changes and restart the PC.
Step 3. Enable EaseUS Partition Master with its Boot Repair feature, and open «Blue Screen» tool.
When EaseUS Partition Master launches, go to the Toolkit section and click «Boot Repair».
Then, click «Blue Screen» and click the listed Blue Screen error to check it’s details. Or, you can type in a specific blue screen code or description to find the respective answer for fixing it.
Step 4. Fix blue screen error
- Now, you can follow the solution guide to get rid of the respective BSOD or blue screen issue from your PC.
- If it doesn’t work, you can also click the «Live Chat» button to request a remote assistance for fixing this issue with the help of EaseUS tech support team.
Fix 6. Uninstall the Recent Windows Update
If the blue screen of death with the error code DPC Watchdog Violation prompts after the installation of an update, the corresponding fix is to uninstall the update directly.
Step 1. Enter control panel in the search bar and click «Control Panel» from the search result.
Step 2. Among the options, choose «Programs and Features», then click «View installed updates» on the left-hand side.
Step 3. To view the latest updates, click «Installed On» to list the updates in decreasing order.
Step 4. To uninstall the suspicious update, right-click it and choose «Uninstall», then choose «Yes» to confirm.
Step 5. After the uninstallation, click «Restart Now» to restart the computer.
🚩Read also: How to Stop Windows 10 Update in Progress in 3 Ways
Fix 7. Uninstall Recent-Installed Software
Follow the steps here if you have just installed a program before the error occurs.
Step 1. In safe mode, click «Start» > «Settings» > «Apps» > «Apps & features».
Step 2. Set to sort the programs by «Install data».
Step 3. Click the target software and choose «Uninstall».
Step 4. Restart the computer.
Fix 8. Rollback, Disable, or Uninstall Driver
The DPC Watchdog Violation error in Windows 10 could also result from the latest driver you installed. For the third-party driver, you can rollback, disable, or uninstall the driver.
Step 1. Type device manager in the search bar and choose «Device Manager» from the result.
Step 2. Expand the device that contains the driver you want to make changes to.
Step 3. Right-click the driver and choose «Properties».
Step 4. Go to the «Driver» tab, choose «Roll Back Driver», «Disable Device» or «Uninstall Device». (You can’t disable some system-required drivers.)
Knowledge Base
There are more than 100 stop error codes that may appear in a blue screen of death. Each may suggest a possible cause and imply the potential solution. Some codes have the same workable solutions. For example, the fixes for the DPC Watchdog Violation error in Windows 10 can also be applied to fix a BSOD with the following error codes:
- CRITICAL_PROCESS_DIED
- SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
- VIDEO_TDR_TIMEOUT_DETECTED
- IRQL_NOT_LESS_OR_EQUAL
- PAGE_FAULT_IN_NONPAGED_AREA
- SYSTEM_SERVICE_EXCEPTION
If you happen to encounter these blue screen errors or other error codes, you can use the methods in this article to have a try.
The Bottom Line
Believe it or not, fixing the DPC Watchdog Violation error is comparatively easy compared with other blue screen errors that may involve changing registry, using command lines or fixing system related issues. Especially with the assistance from EaseUS Partition Master, which contains a powerful Boot Repair function and BSOD analyze utility.
FAQs on DPC Watchdog Violation in Windows 10
-
Q
1. What does a DPC watchdog do?
- A DPC Watchdog monitors the performance of Deferred Procedure Calls in Windows, detecting prolonged execution times that can lead to system instability and triggering a «DPC Watchdog Violation» error when these routines exceed expected limits.
-
Q
2. Why would a DPC fail?
- A DPC can fail due to outdated or incompatible device drivers, software conflicts, or hardware issues that prevent the Deferred Procedure Call from completing in a timely manner.
-
Q
3. Can blue screen of death corrupt files?
- Yes, BSOD can corrupt files due to improper shutdowns, data integrity issues, or failing storage devices that prevent the operating system from saving data correctly
DPC Watchdog Violation is a Blue Screen of Death (BSOD) Error which is very common among Windows 10 users. DPC stands for Deferred Procedure Call and if the DPC Watchdog Violation occurs this means the watchdog detects a DPC running too long and therefore it stops the process in order avoid corrupting your data or your system. The error occurs because of incompatible drivers, and even though Microsoft has released updates to fix the issues, even then few users still face the problem.
Now there are many drivers on Windows 10, and it would be impossible to check every other driver hence many users recommend the clean install of Windows 10. But that should be a last resort to users as there are many other ways you could fix the issue. So without wasting any time let’s see how to actually Fix DPC Watchdog Violation Error in Windows 10 with the help of below-listed troubleshooting guide.
Table of Contents
Fix DPC Watchdog Violation Error In Windows 10
Make sure to create a restore point just in case something goes wrong.
Method 1: Make sure Windows is up to date
1. Press Windows Key + I to open Settings then click on Update & Security.
2. From the left-hand side, menu clicks on Windows Update.
3. Now click on the “Check for updates” button to check for any available updates.
4. If any updates are pending, then click on Download & Install updates.
5. Once the updates are downloaded, install them, and your Windows will become up-to-date.
Method 2: Update the IDE ATA/ATAPI Controller drivers
1. Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.
2. Expand IDE ATA/ATAPI Controllers and then right-click on your device and select Update Driver.
3. Select Browse my computer for driver software.
4. On the next screen, click on “Let me pick from a list of available drivers on my computer”.
5. Choose Standard SATA AHCI Controller from the list and click Next.
6. Wait for the installation to finish then reboot your PC.
After the system restarts see if you’re able to Fix DPC Watchdog Violation Error In Windows 10, if not then continue.
Method 3: Disable Fast Startup
1. Press Windows Key + R then type control and hit Enter to open Control Panel.
2. Click on Hardware and Sound then click on Power Options.
3. Then, from the left window pane select “Choose what the power buttons do.“
4. Now click on “Change settings that are currently unavailable.“
5. Uncheck “Turn on fast startup” and click on Save changes.
6.Reboot your PC and see if you’re able to Fix DPC Watchdog Violation Error in Windows 10.
Method 4: Run SFC and CHKDSK
1. Open Command Prompt. The user can perform this step by searching for ‘cmd’ and then press Enter.
2. Now type the following in the cmd and hit enter:
Sfc /scannow sfc /scannow /offbootdir=c:\ /offwindir=c:\windows
3. Wait for the above process to finish and once done, restart your PC.
4. Next, run CHKDSK to Fix File System Errors.
5. Let the above process complete and again reboot your PC to save changes.
Method 5: Run Driver Verifier
This method is only useful if you can log into your Windows normally not in the safe mode. Next, make sure to create a System Restore point.
Run Driver Verifier in order Fix DPC Watchdog Violation Error in Windows 10. This would eliminate any conflicting driver issues due which this error can occur.
Method 6: Try System Restore
1. Press Windows Key + R and type”sysdm.cpl” then hit enter.
2. Select the System Protection tab and choose System Restore.
3. Click Next and choose the desired System Restore point.
4. Follow the on-screen instruction to complete system restore.
5. After reboot, you may be able to Fix DPC Watchdog Violation Error in Windows 10.
Method 7: Uninstall Display Drivers
1. Right-click on your NVIDIA graphic card under device manager and select Uninstall.
2. If asked for confirmation, select Yes.
3. Type Control Panel in the search bar and press enter
4. From Control Panel, click on Uninstall a Program.
5. Next, uninstall everything related to Nvidia.
6. Reboot your system to save changes and again download the setup from the manufacturer’s website.
5. Once you are sure that you have removed everything, try installing the drivers again. The setup should work without any problems.
Method 8: Repair Install Windows 10
This method is the last resort because if nothing works out, then, this method will surely repair all problems with your PC. Repair Install using an in-place upgrade to repair issues with the system without deleting user data present on the system. So follow this article to see How to Repair Install Windows 10 Easily.
Recommended for you:
- Fix Windows can’t find or start the camera
- Fix WHEA_UNCORRECTABLE_ERROR on Windows 10
- How To Fix Screen Resolution changes by itself issue
- Fix Windows Cannot Be Installed to Drive 0
That’s it you have successfully Fix DPC Watchdog Violation Error In Windows 10 but if you still have any queries regarding this post feel free to ask them in the comment’s section.