Copying windows files 0

Introduction

Installing Windows 10 on a new device can be a straightforward process, but sometimes it can get stuck at the most frustrating stage — ‘Copying Windows files (0%)’. This issue can occur due to various reasons, including corrupted USB drives, incorrect BIOS settings, or even a faulty SSD. In this article, we will explore the possible causes and solutions to resolve the ‘Copying Windows files (0%)’ issue during Windows 10 USB installation.

Understanding the Issue

When you start the Windows 10 installation process from a USB drive, the system begins to copy the necessary files from the USB drive to the target device. This process can take several minutes, depending on the speed of your USB drive and the target device. However, if the process gets stuck at ‘Copying Windows files (0%)’, it can be a sign of a problem.

Possible Causes

There are several possible causes for the ‘Copying Windows files (0%)’ issue during Windows 10 USB installation. Some of the most common causes include:

Corrupted USB Drive

A corrupted USB drive can cause the installation process to get stuck at ‘Copying Windows files (0%)’. This can happen if the USB drive is damaged, or if it has been used to install Windows 10 multiple times.

Incorrect BIOS Settings

Incorrect BIOS settings can also cause the installation process to get stuck. Make sure that your BIOS settings are set to boot from the USB drive, and that the USB drive is recognized by the BIOS.

Faulty SSD

A faulty SSD can cause the installation process to get stuck. If your SSD is damaged or faulty, it may not be able to read the files from the USB drive, causing the installation process to get stuck.

Corrupted Windows 10 ISO

A corrupted Windows 10 ISO can also cause the installation process to get stuck. Make sure that the Windows 10 ISO is not corrupted, and that it is downloaded from a trusted source.

Insufficient Disk Space

Insufficient disk space can also cause the installation process to get stuck. Make sure that the target device has enough disk space to install Windows 10.

Solutions

Now that we have identified the possible causes of the ‘Copying Windows files (0%)’ issue, let’s explore the solutions to resolve this issue.

Create a New USB Drive

If you have tried multiple USB drives and the issue persists, try creating a new USB drive using the Windows Media Creation Tool. This will ensure that the USB drive is not corrupted and that it has the correct files.

Check BIOS Settings

Make sure that your BIOS settings are set to boot from the USB drive. You can do this by entering the BIOS settings and setting the USB drive as the first boot device.

Check SSD Health

If you suspect that the SSD is faulty, you can check its health using a tool like CrystalDiskInfo. This will help you determine if the SSD is damaged or faulty.

Download a New Windows 10 ISO

If you suspect that the Windows 10 ISO is corrupted, try downloading a new one from a trusted source. Make sure that the ISO is not corrupted and that it has the correct files.

Increase Disk Space

If you suspect that the target device has insufficient disk space, try increasing the disk space by deleting unnecessary files or by adding a new hard drive.

Troubleshooting Steps

If you have tried the above solutions and the issue persists, try the following troubleshooting steps:

Try a Different USB Port

Try using a different USB port to see if the issue persists. This will help you determine if the issue is with the USB port or with the USB drive.

Try a Different USB Drive

Try using a different USB drive to see if the issue persists. This will help you determine if the issue is with the USB drive or with the installation process.

Try a Different Target Device

Try installing Windows 10 on a different target device to see if the issue persists. This will help you determine if the issue is with the target device or with the installation process.

Conclusion

The ‘Copying Windows files (0%)’ issue during Windows 10 USB installation can be frustrating, but it is not impossible to resolve. By understanding the possible causes and solutions, you can troubleshoot and resolve this issue. Remember to try a different USB drive, check BIOS settings, check SSD health, download a new Windows 10 ISO, and increase disk space. If the issue persists, try the troubleshooting steps to determine the root cause of the issue.

Additional Tips

Here are some additional tips to help you resolve the ‘Copying Windows files (0%)’ issue:

Use a High-Quality USB Drive

Use a high-quality USB drive that is capable of transferring data at a high speed. This will help ensure that the installation process is completed quickly and efficiently.

Use a Fast SSD

Use a fast SSD that is capable of reading and writing data at a high speed. This will help ensure that the installation process is completed quickly and efficiently.

Use a Trusted Source for the Windows 10 ISO

Use a trusted source for the Windows 10 ISO to ensure that it is not corrupted and that it has the correct files.

Follow the Installation Instructions Carefully

Follow the installation instructions carefully to ensure that the installation process is completed correctly.

Frequently Asked Questions

Here are some frequently asked questions related to the ‘Copying Windows files (0%)’ issue:

Q: Why is my Windows 10 installation stuck at ‘Copying Windows files (0%)’?

A: The Windows 10 installation can get stuck at ‘Copying Windows files (0%)’ due to various reasons, including corrupted USB drives, incorrect BIOS settings, or even a faulty SSD.

Q: How can I resolve the ‘Copying Windows files (0%)’ issue?

A: You can resolve the ‘Copying Windows files (0%)’ issue by trying a different USB drive, checking BIOS settings, checking SSD health, downloading a new Windows 10 ISO, and increasing disk space.

Q: What are the possible causes of the ‘Copying Windows files (0%)’ issue?

A: The possible causes of the ‘Copying Windows files (0%)’ issue include corrupted USB drives, incorrect BIOS settings, faulty SSDs, corrupted Windows 10 ISOs, and insufficient disk space.

Q: How can I troubleshoot the ‘Copying Windows files (0%)’ issue?

Introduction

In our previous article, we discussed the possible causes and solutions to resolve the ‘Copying Windows files (0%)’ issue during Windows 10 USB installation. However, we understand that some of you may still have questions and concerns about this issue. In this article, we will address some of the frequently asked questions related to the ‘Copying Windows files (0%)’ issue.

Q&A

Q: Why is my Windows 10 installation stuck at ‘Copying Windows files (0%)’?

A: The Windows 10 installation can get stuck at ‘Copying Windows files (0%)’ due to various reasons, including corrupted USB drives, incorrect BIOS settings, or even a faulty SSD.

Q: How can I resolve the ‘Copying Windows files (0%)’ issue?

A: You can resolve the ‘Copying Windows files (0%)’ issue by trying a different USB drive, checking BIOS settings, checking SSD health, downloading a new Windows 10 ISO, and increasing disk space.

Q: What are the possible causes of the ‘Copying Windows files (0%)’ issue?

A: The possible causes of the ‘Copying Windows files (0%)’ issue include corrupted USB drives, incorrect BIOS settings, faulty SSDs, corrupted Windows 10 ISOs, and insufficient disk space.

Q: How can I troubleshoot the ‘Copying Windows files (0%)’ issue?

A: You can troubleshoot the ‘Copying Windows files (0%)’ issue by trying a different USB port, trying a different USB drive, trying a different target device, and following the troubleshooting steps.

Q: Can I use a USB drive that is not UEFI compatible?

A: No, you should use a USB drive that is UEFI compatible. If you use a USB drive that is not UEFI compatible, you may encounter issues during the installation process.

Q: Can I use a USB drive that is not 64-bit compatible?

A: No, you should use a USB drive that is 64-bit compatible. If you use a USB drive that is not 64-bit compatible, you may encounter issues during the installation process.

Q: Can I use a USB drive that has been used to install Windows 10 multiple times?

A: No, you should not use a USB drive that has been used to install Windows 10 multiple times. This can cause the USB drive to become corrupted and may lead to issues during the installation process.

Q: Can I use a USB drive that has been used to install Windows 10 on a different device?

A: No, you should not use a USB drive that has been used to install Windows 10 on a different device. This can cause the USB drive to become corrupted and may lead to issues during the installation process.

Q: Can I use a USB drive that has been used to install Windows 10 on a device with a different architecture?

A: No, you should not use a USB drive that has been used to install Windows 10 on a device with a different architecture. This can cause the USB drive to become corrupted and may lead to issues during the installation process.

Q: Can I use a USB drive that has been to install Windows 10 on a device with a different version of Windows?

A: No, you should not use a USB drive that has been used to install Windows 10 on a device with a different version of Windows. This can cause the USB drive to become corrupted and may lead to issues during the installation process.

Q: Can I use a USB drive that has been used to install Windows 10 on a device with a different language?

A: No, you should not use a USB drive that has been used to install Windows 10 on a device with a different language. This can cause the USB drive to become corrupted and may lead to issues during the installation process.

Q: Can I use a USB drive that has been used to install Windows 10 on a device with a different region?

A: No, you should not use a USB drive that has been used to install Windows 10 on a device with a different region. This can cause the USB drive to become corrupted and may lead to issues during the installation process.

Q: Can I use a USB drive that has been used to install Windows 10 on a device with a different time zone?

A: No, you should not use a USB drive that has been used to install Windows 10 on a device with a different time zone. This can cause the USB drive to become corrupted and may lead to issues during the installation process.

Q: Can I use a USB drive that has been used to install Windows 10 on a device with a different keyboard layout?

A: No, you should not use a USB drive that has been used to install Windows 10 on a device with a different keyboard layout. This can cause the USB drive to become corrupted and may lead to issues during the installation process.

Q: Can I use a USB drive that has been used to install Windows 10 on a device with a different mouse layout?

A: No, you should not use a USB drive that has been used to install Windows 10 on a device with a different mouse layout. This can cause the USB drive to become corrupted and may lead to issues during the installation process.

Q: Can I use a USB drive that has been used to install Windows 10 on a device with a different display resolution?

A: No, you should not use a USB drive that has been used to install Windows 10 on a device with a different display resolution. This can cause the USB drive to become corrupted and may lead to issues during the installation process.

Q: Can I use a USB drive that has been used to install Windows 10 on a device with a different graphics card?

A: No, you should not use a USB drive that has been used to install Windows 10 on a device with a different graphics card. This can cause the USB drive to become corrupted and may lead to issues during the installation process.

Q: Can I use a USB drive that has been used to install Windows 10 on a device with a different sound card?

A: No, you should not use a USB drive that has been used to install Windows 10 on a device with a different sound card. This can cause the USB drive to become corrupted and may lead to issues during the installation process.

Q: Can I use a USB drive that has been used to install Windows10 on a device with a different network adapter?

A: No, you should not use a USB drive that has been used to install Windows 10 on a device with a different network adapter. This can cause the USB drive to become corrupted and may lead to issues during the installation process.

Q: Can I use a USB drive that has been used to install Windows 10 on a device with a different operating system?

A: No, you should not use a USB drive that has been used to install Windows 10 on a device with a different operating system. This can cause the USB drive to become corrupted and may lead to issues during the installation process.

Q: Can I use a USB drive that has been used to install Windows 10 on a device with a different firmware?

A: No, you should not use a USB drive that has been used to install Windows 10 on a device with a different firmware. This can cause the USB drive to become corrupted and may lead to issues during the installation process.

Q: Can I use a USB drive that has been used to install Windows 10 on a device with a different BIOS?

A: No, you should not use a USB drive that has been used to install Windows 10 on a device with a different BIOS. This can cause the USB drive to become corrupted and may lead to issues during the installation process.

Q: Can I use a USB drive that has been used to install Windows 10 on a device with a different UEFI firmware?

A: No, you should not use a USB drive that has been used to install Windows 10 on a device with a different UEFI firmware. This can cause the USB drive to become corrupted and may lead to issues during the installation process.

Q: Can I use a USB drive that has been used to install Windows 10 on a device with a different Secure Boot firmware?

A: No, you should not use a USB drive that has been used to install Windows 10 on a device with a different Secure Boot firmware. This can cause the USB drive to become corrupted and may lead to issues during the installation process.

Q: Can I use a USB drive that has been used to install Windows 10 on a device with a different Trusted Platform Module (TPM)?

A: No, you should not use a USB drive that has been used to install Windows 10 on a device with a different Trusted Platform Module (TPM). This can cause the USB drive to become corrupted and may lead to issues during the installation process.

Q: Can I use a USB drive that has been used to install Windows 10 on a device with a different BitLocker firmware?

A: No, you should not use a USB drive that has been used to install Windows 10 on a device with a different BitLocker firmware. This can cause the USB drive to become corrupted and may lead to issues during the installation process.

Q: Can I use a USB drive that has been used to install Windows 10 on a device with a different Windows Defender firmware?

A: No, you should not use a USB drive that has been used to install Windows

I was installing Windows 10 onto a brand new SSD the other day and it was stuck at the «Copying Windows Files»

Many posts on the internet were talking about waiting or checking disk or trying a DVD installation disk rather than a USB installtion stick. None of these seemed right to me. I decided to check the BIOS settings and this is where I found the solution.

The solution

Given that I have done this hundreds of times before I was confused as to what was confusing the problem. I found the problem to be caused by a security setting in the BIOS. As soon as I reset the security keys Windows 10 reinstalled fine. Under Key Management I restored factory defaults.

Картинка с сайта: www.maidenheadcs.co.uk

So I am trying to work with bootcamp to get Windows 10 on my late 2012 iMac. My current OS is Yosemite version 10.10.5.

I’m not very tech savvy so I only partially know what’s going on or what I’m doing.

My boot camp assistant is stuck at copying windows files, and after a while of staying at 50 percent it would give me an error message saying «Your bootable USB drive could not be created. An error occurred while copying the Windows Installation files.»

I have tried two different USBs to see if that could help my situation at all, but both have given me the same message.

I can click ‘OK’ on the message and nothing really happens, it just returns to the loading bar being at ~50% and at that point I don’t know whether it has resumed copying or not.

I left it overnight last night, and it remained on ~50% for the whole night, no new progress.

I’m not sure what’s going on or how I should proceed from here. Any tips or advice would be greatly appreciated!