C windows appcompat appraiser

Disclaimer — if you manually bypass Feature Update blocks, you risk causing issues with your device. The blocks exist for a reason and should be respected. This information is provided for educational purposes only. Proceed with caution.

Windows 10 Feature Updates are released twice per year. For each release, Microsoft has the ability to block the update from being installed or even showing up in Widows Update for applications/drivers/devices that have known compatibility issues. This is a pretty great feature since it helps prevent unnecessary failures for already known issues that Microsoft is possibly already working to address.
The flaw in this feature is the lack of visibility into what is being blocked and how/when it should be unblocked. Microsoft has gotten a little better with this area by keeping this site updated https://docs.microsoft.com/windows/release-information/status-windows-10-2004, however from a client installation perspective, it is often difficult or even impossible to match up an error message/code with anything published on that site (or any other Microsoft site). When Windows 10 2004 was released, there was a block in place for certain hardware models including the Surface line. When your boss has a Surface Pro 7 that can’t upgrade to the latest feature update, you’re not going to have a good time. This post is a deep dive into my experience with identifying Hard Blocks and making sense out of generic error messages like the one below. It will also contain some best guesses for how some things work where I may not have a 100% clear understanding.

Last things First

After writing this, I realized that I have crammed a lot if stuff in here. I want to highlight the main points to keep things from getting lost in the pile.

  1. Gain a better understanding of Feature Update blocks that prevent devices from upgrading — sometimes blocking the update from even showing up on the device as available.
  2. Understand how to manually convert Appraiser results to XML then compare to the Windows Compatibility Database (appraiser.sdb).
  3. Automate the collection and assessment of Feature Update blocks using custom PowerShell module FU.WhyAmIBlocked.

Blocked Upgrade Messages

When Windows 10 2004 shipped, the internet filled up with reports of people getting messages indicating that their devices couldn’t be upgraded. Everyone was asking — ‘Why am I blocked?’. Presenting a message telling us that we are blocked, but providing no actionable information is less than helpful. This needs to improve.

This PC can’t be upgraded to Windows 10

Let’s start with this message. It is very generic and less than helpful. It can appear in the setup UI if you are manually running setup.exe or in c:\$WINDOWS.~BT\Sources\Panther\ActionableReport.html.

A Square Dozen Image

Картинка с сайта: www.asquaredozen.com 

1
2
3

This PC can't be upgraded to Windows 10.
Your PC settings aren't supported yet on this version of Windows 10. Microsoft is working to support your settings soon. No action is needed. Windows Update will offer this version of Windows 10 automatically when these settings are supported.
Learn More (https://docs.microsoft.com/windows/release-information/status-windows-10-2004)

…Your device isn’t quite ready for it…

On these same devices, if you attempt to pull the feature update from Windows Update, you may see a message like this one that showed up for Windows 10 2004.

1
2
3

Feature update to Windows 10, version 2004

The Windows 10 May 2020 Update is on its way. We're offering this update to compatible devices, but your device isn't quite ready for it. Once your device is ready, you'll see the update available on this page. There's nothing you need to do at this time.

CompatData Hard Block

When a Feature Update fails to install, you can generally check in the last CompatData_*.xml file for information about the failure. Unfortunately, sometimes the information is vague.

1
2
3
4
5
6
7

<?xml version="1.0" encoding="utf-8"?>
<CompatReport xmlns="http://www.microsoft.com/ApplicationExperience/UpgradeAdvisor/01012009" MigXmlFile="P6MUWe3Hb0aa0MLV.9.8.0.0_APPRAISER_Migration.xml"><System X64Capable="True" X64Running="True"/><Hardware><HardwareItem HardwareType="Setup_BitlockerNoTargetSupport"><CompatibilityInfo BlockingType="None"/></HardwareItem><HardwareItem HardwareType="Setup_TargetIsNonStagedBuild"><CompatibilityInfo BlockingType="None"/></HardwareItem><HardwareItem HardwareType="Setup_LanguagePackDetected"><CompatibilityInfo BlockingType="None"/></HardwareItem><HardwareItem HardwareType="Setup_LicenseActivation"><CompatibilityInfo BlockingType="None"/></HardwareItem><HardwareItem HardwareType="Setup_FeaturesOnDemandDetected"><CompatibilityInfo BlockingType="None"/></HardwareItem><HardwareItem HardwareType="Setup_PendingFirmwareUpdateWithPower"><CompatibilityInfo BlockingType="None"/></HardwareItem><HardwareItem HardwareType="Setup_FlightSigningEnabled"><CompatibilityInfo BlockingType="None"/></HardwareItem><HardwareItem HardwareType="Setup_SecureBoot"><CompatibilityInfo BlockingType="None"/></HardwareItem><HardwareItem HardwareType="Generic">
			<CompatibilityInfo BlockingType="Hard" Message="Your PC isn't supported yet on this version of Windows 10. No action is needed. Windows Update will offer this version of Windows 10 automatically once the issue has been resolved." Title="This PC can't be upgraded to Windows 10."/>
			<Link Target="https://go.microsoft.com/fwlink/?LinkId=2128961" Value="Learn More"/>
		</HardwareItem>
	</Hardware><SystemInfo UplevelEdition="Windows 10" OSMajorVersion="10" OSMinorVersion="0"/>
	<Devices/>

ConfigMgr and Desktop Analytics

If you are an enterprise customer and are fortunate enough to use ConfigMgr, you can leverage Desktop Analytics to assess device and app compatibility BEFORE attempting to install feature updates. We have been using this (And Windows Analytics before DA) since it was released and it has almost eliminated the need for testing ALL of our applications before deploying the latest Feature Update — we still test critical apps. The shortcoming with DA is that is simply reports back what the Microsoft Compatibility Appraiser reports. It doesn’t include details specific to the blocking app. Work is still being done with DA, so I think there’s hope for integrating more data in the future.

Microsoft Compatibility Appraiser

So, I mentioned the Microsoft Compatibility Appraiser in the previous section. Whether you are aware of it or not, your Windows 10 device is actively assessing your device’s compatibility with Windows releases (possibly other monthly updates as well). I’ll break down the pieces that I have put together, but I still feel like this a ‘black box’ that I don’t fully understand.

CompatTelRunner Scheduled Task

Open Task Scheduler and you will find the Microsoft Compatibility Appraiser task under Task Scheduler Library>Microsoft>Windows>Application Experience

Microsoft Compatibility Appraiser scheduled task

Картинка с сайта: www.asquaredozen.com

Microsoft Compatibility Appraiser scheduled task

This task launches:

%windir%\system32\compattelrunner.exe

which in turn launches:

%windir%\system32\CompatTelRunner.exe -m:appraiser.dll -f:DoScheduledTelemetryRun

The output of this task produces a set of registry entries as well as some output files (possibly others that I’ve missed):

1
2
3
4
5

registry:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags

files:
C:\Windows\appcompat\appraiser\*.bin

These .bin files that are generated contain a list of compatibility assessment results. Portions of the results are also listed in the registry. For example, if there are hard blocks, a SdbAppGUID will be listed in the .bin file and a corresponding entry will be listed in the registry:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\Appraiser\GWX\SdbEntries

Since the entries are in the registry, you can easily use ConfigMgr’s CMPivot tool to query the values to determine which SdbAppGUIDs are causing blocks using this CMPivot query:

1

Registry('HKLM:\\SOFTWARE\\Microsoft\\Windows NT\\CurrentVersion\\AppCompatFlags\\Appraiser\\GWX') | where Property == 'SdbEntries' and Value != ''

Compattelrunner.exe also checked for any policies you may have enabled that prevent updates.

1
2
3
4
5

#Lists the policy locations for Windows Updates
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PolicyManager\default\Update

#One of the locations where the policies may reside
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsUpdate\UpdatePolicy

Appraiser.sdb and Alternate Appraiser Data

The appraiser consumes a database of info from Appraiser.sdb and uses a task list file Appraiser_TelemetryRunList.xml to tell it what to process. The default location of these files is C:\Windows\System32\appraiser.

If a machine is not on the latest Feature Update, compattelrunner.exe will download an Alternate_AppraiserData.cab file to c:\Windows\appcompat\appraiser from http://adl.windows.com/appraiseradl/YYYY_DD_MM_??_??_ARCH.CAB

Here’s a list of cab files that I’ve been able to find by looking at setupact.log files and searching the internet for other people’s logs. I don’t know where the current URL comes from to tell the client which file to get nor do I know what the last 2 sets of numbers stand for. I was thinking they may be HH_MM but that doesn’t seem to line up every time.

1
2
3
4
5
6
7
8

http://adl.windows.com/appraiseradl/2019_12_05_03_05_AMD64.cab
http://adl.windows.com/appraiseradl/2020_01_09_04_05_AMD64.cab
http://adl.windows.com/appraiseradl/2020_03_27_03_52_AMD64.cab
http://adl.windows.com/appraiseradl/2020_04_02_05_51_AMD64.cab
http://adl.windows.com/appraiseradl/2020_06_17_03_51_AMD64.cab
http://adl.windows.com/appraiseradl/2020_06_26_06_52_AMD64.cab
http://adl.windows.com/appraiseradl/2020_07_09_05_51_AMD64.cab
http://adl.windows.com/appraiseradl/2020_07_23_05_02_AMD64.cab

You can read more about data sharing and this URL here: https://docs.microsoft.com/mem/configmgr/desktop-analytics/enable-data-sharing. Be sure that you allow clients to access the listed URLs or you may experience issues with updates not having the latest compatibility information.
When you expand the cab files using, you will get the following contents:

1
2
3
4

C:\Windows\appcompat\appraiser\Alternate_AppraiserData.cab - Contents
appraiser.sdb
Appraiser_Data.ini
Appraiser_TelemetryRunList.xml

These files are the key to understanding why machines will be blocked one day then unblocked the next and why you may experience different results on the same devices.

Dynamic Updates

If you disable Dynamic Updates or prevent your devices from going to the URLs listed above, you run the risk of preventing your devices from being able to install the latest Feature Update or install it properly. Whenever Windows setup runs, it will run a customized compatibility assessment and will download the latest Alternate_AppraiserData.cab files. This ensure that it has the latest compatibility information to assess a device against and provides a list of current migration shims that may mean the difference between success or failure of the upgrade.

Setupact.log

During or after a Feature Update, the setupact.log shows where it goes out to get the latest cab then runs a compatibility assessment. This one of several compatibility checks that are performed.

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19

MOUPG  Setup Phase: [4]
MOUPG  Setup SubPhase: [8]
CONX   Windows::Compat::Appraiser::SetupAppraiser::GetAlternateData (3854):   Setup alternate data in use [1], Url [http://adl.windows.com/appraiseradl/2020_07_23_05_52_AMD64.cab], Result [0x0].
CONX   Windows::Compat::Appraiser::SdbUtils::SendSdbInfoTelemetry (1089):   Using Sdb Id: [{11111111-1111-1111-1111-111111111111}] Size: [13013088] Modified: [2020-07-23T23:29:39], at path C:\$WINDOWS.~BT\Sources\Panther\appraiser.sdb
CONX   Windows::Compat::Appraiser::WicaFactory::DoWicaRun (328):   WicaRun started.
CONX   Windows::Compat::Appraiser::WicaEngine::RunComponents (1340):   Engine starting.
CONX   Windows::Compat::Appraiser::SystemInventory::GetInventory (141):   Starting System Inventory.
CONX   Windows::Compat::Appraiser::WicaDeviceInventory::GetInventory (343):   Starting Device Inventory.
CONX   Windows::Compat::Appraiser::SystemInventory::GetInventory (168):   Finished System Inventory.
CONX   Windows::Compat::Appraiser::WicaDeviceInventory::GetInventory (368):   DevInv version is 10.0.18362
CONX   Windows::Compat::Appraiser::WicaDeviceInventory::GetInventory (369):   Processing Device Inventory File.
CONX   Windows::Compat::Appraiser::WicaDeviceInventory::GetInventory (409):   Finished reading Device Inventory. 0 Devices
CONX   Windows::Compat::Appraiser::WicaEngine::RunComponents (1345):   Tier complete: Inventory.
CONX   Windows::Compat::Appraiser::WicaEngine::RunComponents (1350):   Tier complete: Data Source.
CONX   Windows::Compat::Appraiser::WicaEngine::RunComponents (1355):   Tier complete: Decision Maker.
CONX   Windows::Compat::Appraiser::WicaEngine::RunComponents (1360):   Tier complete: Decision Aggregator.
CONX   Windows::Compat::Appraiser::WicaEngine::RunComponents (1366):   Engine finished.
CONX   Windows::Compat::Appraiser::SetupAppraiser::StartScan (159):   Start Scan Done
CONX   ConX::Compatibility::CCompatibilityHost::SerializeData: Provider wsc:wica: is serializing 580 bytes of data.

Just as the CompatTelRunner scheduled task will create new bin files, the process during Windows Setup will create a set of XML and BIN files in the Panther folder.

A Square Dozen Image

Картинка с сайта: www.asquaredozen.com

Appraiser_TelemetryRunList.xml

The Appraiser_TelemetryRunList.xml file tells the appraiser which actions to perform. It also tells it which sdb to use and where to output results of each scan. You could compare this xml to the xml files output during Windows setup and match up the components. I haven’t gotten that far into it. The module included at the end here has PowerShell to generate your own RunList.

A Square Dozen Image

Картинка с сайта: www.asquaredozen.com

Force a new Appraiser.sdb to process

During testing, I was able to replace the current Appraiser_AlternateData.cab file with an older version and run the scheduled task and the old file would be used. This is because the registry key logs which files were used last. If the key isn’t updated or deleted, a new file won’t be downloaded. Comparing Appraiser_Data.ini with the registry key you can determine if the device has used the current database.

I was also able to delete the Appraiser_AlternateData.cab from C:\Windows\appcompat\appraiser and re-run the scheduled task and it would pull down the latest version.

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\Appraiser

Картинка с сайта: www.asquaredozen.com

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\Appraiser
Appraiser_Data.ini

Deserialize Appraiser BIN files

The output of the appraiser process will be a .bin file (and during a feature update an .xml file). The bin file is just a binary XML file that can be converted by using the appraiser process. It’s a configuration option built into the RunList XML. Here’s an example XML file that will take the file C:\Windows\appcompat\appraiser\APPRAISER_TelemetryBaseline_20H1.bin and deserialize it into the XML file APPRAISER_TelemetryBaseline_20H1_HUMANREADABLE.xml

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17

<?xml version="1.0" encoding="UTF-8"?>
<WicaRun>
  <RunInfos>
    <RunInfo>
      <Component TypeIdentifier="InventoryBinaryDeserializer" SpecificIdentifier="InventoryBinaryDeserializer" Type="Inventory">
        <Property Name="BinaryDeserializerTier" Value="Inventory" />
        <Property Name="BinaryDeserializerTier" Value="DataSource" />
        <Property Name="BinaryDeserializerTier" Value="DecisionMaker" />
        <Property Name="BinaryDeserializerTier" Value="DecisionAggregator" />
        <Property Name="BinaryDeserializerFilePath" Value="C:\Windows\appcompat\appraiser\APPRAISER_TelemetryBaseline_20H1.bin" />
      </Component>
      <Component TypeIdentifier="OutputEverything" SpecificIdentifier="OutputEverything" Type="Outputter">
        <Property Name="OutputFilePath" Value="APPRAISER_TelemetryBaseline_20H1_HumanReadable.xml" />
      </Component>
    </RunInfo>
  </RunInfos>
</WicaRun>

Run this in a cmd prompt and point to your RunList.

rundll32.exe appraiser.dll,RunTest MyRunList.xml

A Square Dozen Image

Картинка с сайта: www.asquaredozen.com

I used this script from Technet gallery (which will be going away soon) to get started down this process. It appears to be maintained by someone from the Microsoft CSS team but I’m not sure. https://gallery.technet.microsoft.com/scriptcenter/APPRAISE-APPRAISERbin-to-8399c0ee

*HumanReadable.XML

In the screenshot below of the Windows Panther folder, you’ll see bin and xml files. These files were generated during a Feature Update and you’ll see that they are already in XML format. From my experience, I’ve found that the second entry is the one that will generally contain block information. They correspond to the bin files that we see in the appraiser folder. There will be an *_UNV.bin and one that corresponds to the Windows release like *_20H1.bin. Likewise, the files created during setup appear to be broken out the same way.

A Square Dozen Image

Картинка с сайта: www.asquaredozen.com

An example of a device that’s blocked by an entry in one of these files would look like this. This is from the appraiser output folder, not a Feature Update. Search the file for the BlockingMatchingInfo property to find blocks.

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33

<PropertyList Type="Inventory">
        <Property Name="AssetType" Value="BlockingMatchingInfo" />
      </PropertyList>
      <PropertyList Type="DataSource">
        <Property Name="ApplicableTargetVersion" Value="20H1" Ordinal="1" />
        <Property Name="ApplicableTargetVersion" Value="20H1" Ordinal="2" />
        <Property Name="SdbAppGuid" Value="{afb67a42-a10a-48a0-9677-77b4d80efecc}" Ordinal="1" />
        <Property Name="SdbAppGuid" Value="{afb67a42-a10a-48a0-9677-77b4d80efecc}" Ordinal="2" />
        <Property Name="SdbAppName" Value="OneDrive and Legacy filters" Ordinal="1" />
        <Property Name="SdbAppName" Value="OneDrive and Legacy filters" Ordinal="2" />
        <Property Name="SdbAppVendor" Value="Microsoft" Ordinal="1" />
        <Property Name="SdbAppVendor" Value="Microsoft" Ordinal="2" />
        <Property Name="SdbBlockOverrideType" Value="SDB_UX_BLOCKTYPE_OVERRIDE_UPGRADE_BLOCK" Ordinal="1" />
        <Property Name="SdbBlockOverrideType" Value="SDB_UX_BLOCKTYPE_OVERRIDE_UPGRADE_BLOCK" Ordinal="2" />
        <Property Name="SdbBlockType" Value="BlockUpgrade" Ordinal="1" />
        <Property Name="SdbBlockType" Value="BlockUpgrade" Ordinal="2" />
        <Property Name="SdbEntryGuid" Value="{b074d9ce-fc26-4e0b-9978-42e541e23388}" Ordinal="1" />
        <Property Name="SdbEntryGuid" Value="{19d3703c-f2f8-4d66-a480-078235f28797}" Ordinal="2" />
        <Property Name="SdbFwLink" Value="2133887" Ordinal="1" />
        <Property Name="SdbFwLink" Value="2133887" Ordinal="2" />
        <Property Name="SdbGenericMessageSummary" Value="Resource: 10028" Ordinal="1" />
        <Property Name="SdbGenericMessageSummary" Value="Resource: 10028" Ordinal="2" />
        <Property Name="SdbGenericMessageSummaryStringPresent" Value="TRUE" Ordinal="1" />
        <Property Name="SdbGenericMessageSummaryStringPresent" Value="TRUE" Ordinal="2" />
        <Property Name="SdbGenericMessageTitle" Value="Resource: 10026" Ordinal="1" />
        <Property Name="SdbGenericMessageTitle" Value="Resource: 10026" Ordinal="2" />
        <Property Name="SdbGenericMessageTitleStringPresent" Value="TRUE" Ordinal="1" />
        <Property Name="SdbGenericMessageTitleStringPresent" Value="TRUE" Ordinal="2" />
        <Property Name="SdbHyperlinkTarget" Value="https://go.microsoft.com/fwlink/?LinkId=2133887" Ordinal="1" />
        <Property Name="SdbHyperlinkTarget" Value="https://go.microsoft.com/fwlink/?LinkId=2133887" Ordinal="2" />
        <Property Name="SdbHyperlinkText" Value="Resource: 10041" Ordinal="1" />
        <Property Name="SdbHyperlinkText" Value="Resource: 10041" Ordinal="2" />
      </PropertyList>
A Square Dozen Image

Картинка с сайта: www.asquaredozen.com

Here’s another example of the block generated during a Feature Update. The main differences are 1) there are 2 blocks in the first example 2) the feature update blocks render out the GenericMessage text where the appraiser version just points to a Resource ID.

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19

<PropertyList Type="Inventory">
        <Property Name="AssetType" Value="BlockingMatchingInfo" />
      </PropertyList>
      <PropertyList Type="DataSource">
        <Property Name="ApplicableTargetVersion" Value="20H1" Ordinal="1" />
        <Property Name="SdbAppGuid" Value="{afb67a42-a10a-48a0-9677-77b4d80efecc}" Ordinal="1" />
        <Property Name="SdbAppName" Value="OneDrive and Legacy filters" Ordinal="1" />
        <Property Name="SdbAppVendor" Value="Microsoft" Ordinal="1" />
        <Property Name="SdbBlockOverrideType" Value="SDB_UX_BLOCKTYPE_OVERRIDE_UPGRADE_BLOCK" Ordinal="1" />
        <Property Name="SdbBlockType" Value="BlockUpgrade" Ordinal="1" />
        <Property Name="SdbEntryGuid" Value="{b074d9ce-fc26-4e0b-9978-42e541e23388}" Ordinal="1" />
        <Property Name="SdbFwLink" Value="2133887" Ordinal="1" />
        <Property Name="SdbGenericMessageSummary" Value="Your PC settings aren't supported yet on this version of Windows 10. Microsoft is working to support your settings soon. No action is needed. Windows Update will offer this version of Windows 10 automatically when these settings are supported." Ordinal="1" />
        <Property Name="SdbGenericMessageSummaryStringPresent" Value="TRUE" Ordinal="1" />
        <Property Name="SdbGenericMessageTitle" Value="This PC can't be upgraded to Windows 10." Ordinal="1" />
        <Property Name="SdbGenericMessageTitleStringPresent" Value="TRUE" Ordinal="1" />
        <Property Name="SdbHyperlinkTarget" Value="https://go.microsoft.com/fwlink/?LinkId=2133887" Ordinal="1" />
        <Property Name="SdbHyperlinkText" Value="Learn More" Ordinal="1" />
      </PropertyList>

The entries are grouped by Name, so you have to follow the Ordinal values. All Ordinal = "1" entries belong to the same block. In this case we can see that this device has 2 blocks for OneDrive and Legacy filters. Not all entries listed in this section will be hard blocks but it’s a good place to start.

What the Heck is OneDrive and Legacy filters?!?

In my search to find answers, the OneDrive and Legacy filters block has been the thing that I just didn’t understand. If you list an app or hardware model in the block, that makes sense, but this one was so vague that it drove me to dig deeper.

I had a hunch that the info I needed would be in the appraiser.sdb files. After some digging around and lots of trial and error, I found 2 tools that ultimately helped convert the Compatibility Appraiser Database to XML.

https://github.com/TheEragon/SdbUnpacker — Python script to decompress the sdb.
https://devblogs.microsoft.com/setup/shim-database-to-xml — EXE to convert from sdb format to XML using the SDB API.

Once I had extracted the SDB into XML. I was able to match the GUIDs from the appraiser bin files with entries in the database. Each entry lists the files and registry keys that are used to determine if something should be blocked. In my case, there were 4 relevant entries related to OneDrive and Legacy filters.

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33

<MATCHING_INFO_BLOCK>
      <NAME type="xs:string"></NAME>
      <APP_NAME type="xs:string">OneDrive and Legacy filters</APP_NAME>
      <VENDOR type="xs:string">Microsoft</VENDOR>
      <EXE_ID type="xs:string" baseType="xs:base64Binary">{b074d9ce-fc26-4e0b-9978-42e541e23388}</EXE_ID>
      <APP_ID type="xs:base64Binary" />
      <DEST_OS_GTE type="xs:string">20H1</DEST_OS_GTE>
      <DEST_OS_LT type="xs:string">21H1</DEST_OS_LT>
      <MATCHING_REG>
        <NAME type="xs:string">SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\BypassBlockUpgrade</NAME>
        <MATCH_LOGIC_NOT />
        <REG_VALUE_NAME type="xs:string">{B074D9CE-FC26-4E0B-9978-42E541E23388}</REG_VALUE_NAME>
        <REG_VALUE_TYPE type="xs:int">4</REG_VALUE_TYPE>
        <REG_VALUE_DATA_DWORD type="xs:int">1</REG_VALUE_DATA_DWORD>
      </MATCHING_REG>
      <PICK_ONE>
        <MATCH_PLUGIN>
          <NAME type="xs:string">RegistryMatchingPlugin</NAME>
          <COMMAND_LINE type="xs:string">"HKEY_USERS\*\Software\Microsoft\OneDrive\Accounts\Personal" ValueSearch FirstRun eq 1 REG_DWORD</COMMAND_LINE>
        </MATCH_PLUGIN>
        <MATCH_PLUGIN>
          <NAME type="xs:string">RegistryMatchingPlugin</NAME>
          <COMMAND_LINE type="xs:string">"HKEY_USERS\*\Software\Microsoft\OneDrive\Accounts\Business*" ValueSearch FirstRun eq 1 REG_DWORD</COMMAND_LINE>
        </MATCH_PLUGIN>
      </PICK_ONE>
      <BLOCK_UPGRADE>
        <BLOCK_UPGRADE_TYPE type="xs:int">3</BLOCK_UPGRADE_TYPE>
        <SUMMARY_MSG_RC_ID type="xs:int">10028</SUMMARY_MSG_RC_ID>
        <TITLE_MSG_RC_ID type="xs:int">10026</TITLE_MSG_RC_ID>
        <FW_LINK_ID type="xs:int">2133887</FW_LINK_ID>
        <LINK_TEXT_RC_ID type="xs:int">10041</LINK_TEXT_RC_ID>
      </BLOCK_UPGRADE>
    </MATCHING_INFO_BLOCK>

From this entry, we can see that the appraiser is looking for the existence of registry keys. If they exit, it will block the upgrade and display messaged tied to the IDs listed in the BLOCK_UPGRADE section. Once I removed the registry keys for all of the blocks and re-ran the appraiser, the blocks went away and I was able to apply the Feature Update.

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33

<MATCHING_INFO_BLOCK>
      <NAME type="xs:string"></NAME>
      <APP_NAME type="xs:string">OneDrive and Legacy filters</APP_NAME>
      <VENDOR type="xs:string">Microsoft</VENDOR>
      <EXE_ID type="xs:string" baseType="xs:base64Binary">{b074d9ce-fc26-4e0b-9978-42e541e23388}</EXE_ID>
      <APP_ID type="xs:base64Binary" />
      <DEST_OS_GTE type="xs:string">20H1</DEST_OS_GTE>
      <DEST_OS_LT type="xs:string">21H1</DEST_OS_LT>
      <MATCHING_REG>
        <NAME type="xs:string">SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\BypassBlockUpgrade</NAME>
        <MATCH_LOGIC_NOT />
        <REG_VALUE_NAME type="xs:string">{B074D9CE-FC26-4E0B-9978-42E541E23388}</REG_VALUE_NAME>
        <REG_VALUE_TYPE type="xs:int">4</REG_VALUE_TYPE>
        <REG_VALUE_DATA_DWORD type="xs:int">1</REG_VALUE_DATA_DWORD>
      </MATCHING_REG>
      <PICK_ONE>
        <MATCH_PLUGIN>
          <NAME type="xs:string">RegistryMatchingPlugin</NAME>
          <COMMAND_LINE type="xs:string">"HKEY_USERS\*\Software\Microsoft\OneDrive\Accounts\Personal" ValueSearch FirstRun eq 1 REG_DWORD</COMMAND_LINE>
        </MATCH_PLUGIN>
        <MATCH_PLUGIN>
          <NAME type="xs:string">RegistryMatchingPlugin</NAME>
          <COMMAND_LINE type="xs:string">"HKEY_USERS\*\Software\Microsoft\OneDrive\Accounts\Business*" ValueSearch FirstRun eq 1 REG_DWORD</COMMAND_LINE>
        </MATCH_PLUGIN>
      </PICK_ONE>
      <BLOCK_UPGRADE>
        <BLOCK_UPGRADE_TYPE type="xs:int">3</BLOCK_UPGRADE_TYPE>
        <SUMMARY_MSG_RC_ID type="xs:int">10028</SUMMARY_MSG_RC_ID>
        <TITLE_MSG_RC_ID type="xs:int">10026</TITLE_MSG_RC_ID>
        <FW_LINK_ID type="xs:int">2133887</FW_LINK_ID>
        <LINK_TEXT_RC_ID type="xs:int">10041</LINK_TEXT_RC_ID>
      </BLOCK_UPGRADE>
    </MATCHING_INFO_BLOCK>
A Square Dozen Image

Картинка с сайта: www.asquaredozen.com

While I was in the sdb, I discovered another registry key that allowed me to bypass the block without actually deleting registry keys that may be critical to the app causing the block.

1
2
3

Key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\BypassBlockUpgrade
Property: {B074D9CE-FC26-4E0B-9978-42E541E23388}
DWORD Value: 1
A Square Dozen Image

Картинка с сайта: www.asquaredozen.com

Once I created the regkeys and re-ran the appraiser, the blocks were still listed, but new entries appeared referencing the BypassBlockUpgrade keys.

A Square Dozen Image

Картинка с сайта: www.asquaredozen.com

Here’s another example where the Surface Pro 7 was blocked for 2004. This one gets a bit tricky. The first image show 2 GUIDs that match the GUIDs for a MACHINE_BLOCK in the 4th image. The second image shows the SdbEntryGuid that matches the MATCHING_INFO_BLOCK in the 3rd image. You’ll also see the registry key to bypass the block in the 3rd image. This whole time, we could have bypassed the Surface Pro 7 block!!!

*Appraiser_HumanReadable.xml

Картинка с сайта: www.asquaredozen.com

*Appraiser_HumanReadable.xml
*Appraiser_HumanReadable.xml

Картинка с сайта: www.asquaredozen.com

*Appraiser_HumanReadable.xml
Appraiser.sdb entries

Картинка с сайта: www.asquaredozen.com

Appraiser.sdb entries
Appraiser.sdb entries

Картинка с сайта: www.asquaredozen.com

Appraiser.sdb entries

FU.WhyAmIBlocked Powershell Module

FU is short for Feature Update

After going through all of this, I decided that this was too many steps to perform on a per-machine basis, so I took everything and created a new PowerShell module to help. Detailed usage info and updates can be found on the GitHub project site https://github.com/AdamGrossTX/FU.WhyAmIBlocked.
It has been published to the PowerShell Gallery (My first one, thanks Ben!) and you can install it directly on any machine you need to troubleshoot. https://www.powershellgallery.com/packages/FU.WhyAmIBlocked

In order to process the database SDB files, you will need Python installed. I have tested with Python 3.8 using the msi installer or the Windows Store app (which is pretty sweet!).

Also, I was limited on the block scenarios that I could replicate in my environment so results and match text files may not show everything. I suggest manually searching the appraiser.sdb.XML file for additional entries.

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14

#Install and initialize
Install-Module FU.WhyAmIBlocked
Initialize-FUModule

#Get blocks on local device where the command is being run
Get-FUBlocks

#Get blocks from a remote device (Some limitations on features - registry key gathering and launching the appraiser)
Get-FUBlocks -DeviceName 'MyDevice'

#Process files from an alternate source path. Need .bin and Appraiser_AlternateData.cab files for this.
Get-FUBlocks -AlternateSourcePath 'C:\AltSource'

#Many more options available.

Assessing your Compatibility Blocks at Scale

Here’s what I did to assess my environment:

  • Collect SDB Block GUIDS and SDB Versions from the Registry using CMPivot
1
2

Registry('HKLM:\\SOFTWARE\\Microsoft\\Windows NT\\CurrentVersion\\AppCompatFlags\\Appraiser\\GWX')
| where Property == 'SdbEntries' and Value != ''
  • Export results to CSV and get a distinct GUID list
  • Process GUIDs against Appraiser.sdb.xml
 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17

Import-Module FU.WhyAmIBlocked -Force

$BlockList = ('{62170609-e32b-4c80-a92a-a1025fd653af}',
'{1a55176d-2657-4b31-ba20-01721c9ab513}',
'{fa1d81f1-57b7-4907-970a-a37d80d41304}',
'{6c5378a1-aa13-4c12-95e8-11f90f27c528}',
'{691d652a-ea4b-4573-8c60-661049a36185}',
'{62170609-e32b-4c80-a92a-a1025fd653af}',
'{5e757e51-cc84-4a4a-ae70-d69a6a2b37f1}',
'{55350e5a-e423-48f8-8c4e-56c67315ec6f}',
'{1a55176d-2657-4b31-ba20-01721c9ab513}',
'{115791cb-3956-49d4-b375-30ec430137d3}',
'{0c65fb7b-65d4-48f1-80ce-eb0e2e49d43a}')


Extract-FUXMLFromSDB -AlternateSourcePath C:\FeatureUpdateBlocks\AltSrc -Path C:\FeatureUpdateBlocks\Output -SDBCab AltData.cab
Find-FUBlocksInSDB -Path C:\FeatureUpdateBlocks\Output -BlockList $BlockList

This should produce a Matches.txt file that you can use to review all of your enterprise’s blocks without having to collect any additional client information.

A Square Dozen Image

Картинка с сайта: www.asquaredozen.com

Summary

I feel like I’ve covered all of the pieces of the puzzle that I’ve put together at this point. I don’t think I’m finished with this process or the module, but needed to get this first round of info out of my head before I lose it. I’d love to hear your thoughts and get feedback on the module.

References

  • sdbUnpacker — https://github.com/TheEragon/SdbUnpacker
  • sdb2xml — https://devblogs.microsoft.com/setup/shim-database-to-xml/
  • Shim Database API — https://docs.microsoft.com/windows/win32/devnotes/application-compatibility-database?redirectedfrom=MSDN
  • Get-SDBFileInfo.ps1 — https://github.com/cinglis-msft/UpdateComplianceConfigurationScript/blob/1ab7c920ea81b86a1b36c698027c8fb8fdd064d5/Pilot/Diagnostics/Get-SdbFileInfo.ps1
  • CSSAPRS — https://gallery.technet.microsoft.com/scriptcenter/APPRAISE-APPRAISERbin-to-8399c0ee
  • AppRPS script. May be a predecessor to the one above — https://aka.ms/AppRPS

Addendum

After posting this, I got a message from Trevor Jones pointing me to a Microsoft doc with a buried registry key to bypass any data collection compatibly checks for Feature Updates. https://docs.microsoft.com/windows/deployment/update/update-compliance-feature-update-status#opting-out-of-compatibility-hold

Here’s the text from that post in case it ever goes away:

Compatibility holds

Microsoft uses diagnostic data to determine whether devices that use Windows Update are ready for a feature update in order to ensure a smooth experience. When Microsoft determines a device is not ready to update due to a known issue, a compatibility hold is generated to delay the device’s upgrade and safeguard the end-user experience. Holds are released over time as diagnostic data is analyzed and fixes are addressed. Details are provided on some, but not all compatibility holds on the Windows 10 release information page for any given release.

Opting out of compatibility hold

Microsoft will release a device from a compatibility hold when it has determined it can safely and smoothly install a feature update, but you are ultimately in control of your devices and can opt out if desired. To opt out, set the registry key HKLM\Software\Microsoft\Windows NT\CurrentVersion\502505fe-762c-4e80-911e-0c3fa4c63fb0 to a name of DataRequireGatedScanForFeatureUpdates and a value of «.

Setting this registry key to 0 will force the device to opt out from all compatibility holds. Any other value, or deleting the key, will resume compatibility protection on the device.

I will test this when I get some time and see if how it behaves compared to the other options mentioned. Thanks Trevor!

Источник

Windows 10: What are Appraiser* files?

Discus and support What are Appraiser* files? in Windows 10 Network and Sharing to solve the problem; Since 1/10/2020, I have three new files under C:\Windows\appcompat\appraiseer. An Explorer snapshot of those files is shown below. Does anyone know…
Discussion in ‘Windows 10 Network and Sharing’ started by MesPia, Jan 17, 2020.

  1. What are Appraiser* files?

    Since 1/10/2020, I have three new files under C:\Windows\appcompat\appraiseer. An Explorer snapshot of those files is shown below. Does anyone know what these files are for? Could they be malware?

    What are Appraiser* files? 7e38412b-df94-4a74-96f7-515a47cd0102?upload=true.png

    Картинка с сайта: www.windowsphoneinfo.com

    :)

  2. Computer Part Appraisal

    If everyone is in agreement with the Suggestions above…. I thank everyone who has helped out. And I will be putting the appraisal to good use tomorrow.

    Thanks again.

  3. Windows 10 Compatibility Appraiser will not start manually

    Hello,

    I hope I am posting in the correct forum. Let me know if I should post in a different windows7 forum or the windows10 forum.

    I have Windows 7 PRO (64bit) and cannot find a way to make an update to the Windows 10 Compatibility Appraiser.

    What I have done:

    Downloaded and installed KB3035583. I have the windows (flag /) icon in my task tray and successfully ran the Windows 10 Compatibility Appraiser. A report was generated on 5/26/2016 saying my PC (a desktop) was compatible and there was one
    software program that needed to be removed.

    The software program is an “ older” copy of Acronis Home backup. I updated the Acronis program to a new Windows 10 version, and verified the new version works and makes backups.

    I want to re-run the Windows 10 Compatibility Appraiser to verify my PC is now fully 100% compatible.
    I have been unable to find a way to manually run Windows 10 Compatibility Appraiser.

    When I open the Windows 10 task tray icon I appear to be stuck at the completion of the last run (report dated 5/26/2016) with no way to request and update.

    I did a Google search on how to manually start Windows 10 Compatibility Appraiser.

    Two pages listed the following elevated command prompt to manually start Windows 10 Compatibility Appraiser.

    Open an elevated command prompt window, type the following command, and hit Enter:

    schtasks.exe /Run /TN «\Microsoft\Windows\Application Experience\Microsoft Compatibility Appraiser»

    I sent the first command and waited about an hour and a half and then checked for an updated report in the
    Windows 10 Compatibility Appraiser. There appeared to no change, text of report is the same; Acronis software still flagged as a problem and the report was still dated 5/26/2016.

    I sent the second, identical command. It has now been over 4 hours and a check of the Windows 10 Compatibility Appraiser report shows no change.
    Text of report is the same; Acronis software still flagged as a problem and the report was still dated 5/26/2016.

    What am I doing wrong? I need to have a current dated report showing the compatibility is 100%, OR a list of non-compatible items
    so I can make changes or remove. Is there a way to manually start the Windows 10 Compatibility Appraiser and generate a current dated report?

    I looked at the Task Scheduler and as far as I could tell the task scheduler , under Setup, gwx is supposed to run at log on.
    It may be running, but not generating an updated report. I am not familiar with the Task Scheduler, so my interpretation is probably not correct.

    Suggestions and tips greatly appreciated,

    krazykat

  4. What are Appraiser* files?

    Edge Search Does Not Permit Change of Region

    I got these suggestions from the Microsoft Community forum.No. 1 worked for me:

    Thank you for posting the query on Microsoft Community. I am glad to assist you on this.
    We have reproduce the issue here and we are able to access non-regional search for google using Microsoft Edge.
    I would suggest you to try the below steps and check if it helps.
    Step 1:
    Clear browsing data option of Microsoft Edge and check if you face the issue. To do so perform the steps below.

    1. Click on the More actions icon next to the feedback icon present on top right corner of the Project Spartan homepage.
    2. Select Settings and click on Choose what to clear.
    3. Check the boxes Browsing history, Cookies and saved website data and Cached data and files and click on Clear.

    Step 2:
    I suggest you to create a new user account and check if the issue occurs.

    1. Go to Settings.
    2. Choose Accounts and then select Family and other users.
    3. Select add someone else on this PC.
    4. Enter a user name and hit next.
    5. Click on Finish.
    6. Sign out from the current Account and Log into the new account.

    Step 3:
    It could also happen because of network issue. I suggest you to try with different network connection and check if it helps.

Thema:

What are Appraiser* files?

  1. What are Appraiser* files? — Similar Threads — are Appraiser* files

  2. Inventory and Compatibility appraisal service in my Windows server 2025 is running and…

    in Windows 10 Software and Apps

    Inventory and Compatibility appraisal service in my Windows server 2025 is running and…: Inventory and Compatibility appraisal service in my Windows server 2025 is running for 5 minutes and then stopping for 30 mins-60mins approx. and then same process is happening repeatedly. Kindly suggest me some ways to fix it or is this a known issue or any new issue to a…

  3. What is Appraiser

    in Windows 10 Gaming

    What is Appraiser: Hello Since 2/02/2025 a folder named as Appraiser appeared in my 11 computer all of a sudden. Is that a malware? Should I be concerned ?

    https://answers.microsoft.com/en-us/windows/forum/all/what-is-appraiser/35f5cb27-94f2-464f-b9da-c15a00a2ce97

  4. What is Appraiser

    in Windows 10 Software and Apps

    What is Appraiser: Hello Since 2/02/2025 a folder named as Appraiser appeared in my 11 computer all of a sudden. Is that a malware? Should I be concerned ?

    https://answers.microsoft.com/en-us/windows/forum/all/what-is-appraiser/35f5cb27-94f2-464f-b9da-c15a00a2ce97

  5. Accidentally deleted Microsoft Compatibility Appraiser

    in Windows 10 Gaming

    Accidentally deleted Microsoft Compatibility Appraiser: Long story short, while trying to figure out why my PC didnt want to upgrade to Windows 11 despite it being very well capable of it, So in the process of that, i was led into the Task Scheduler, where i was told to run the «Microsoft Compatibility Appraiser». This i did,…

  6. Accidentally deleted Microsoft Compatibility Appraiser

    in Windows 10 Software and Apps

    Accidentally deleted Microsoft Compatibility Appraiser: Long story short, while trying to figure out why my PC didnt want to upgrade to Windows 11 despite it being very well capable of it, So in the process of that, i was led into the Task Scheduler, where i was told to run the «Microsoft Compatibility Appraiser». This i did,…

  7. Accidentally deleted Microsoft Compatibility Appraiser

    in Windows 10 Installation and Upgrade

    Accidentally deleted Microsoft Compatibility Appraiser: Long story short, while trying to figure out why my PC didnt want to upgrade to Windows 11 despite it being very well capable of it, So in the process of that, i was led into the Task Scheduler, where i was told to run the «Microsoft Compatibility Appraiser». This i did,…

  8. would this be an accurate appraisal of microsoft operating systems

    in Windows 10 Installation and Upgrade

    would this be an accurate appraisal of microsoft operating systems: windows 7 and previous takes a long time to install, then takes a little while hours or a day or two for you to load the drivers and customise then takes a little while longer days to load up your regular programs windows 10 installs in a very short time. loads of most of the…

  9. Unable to disable Microsoft Compatibility Appraiser in Task Scheduler

    in Windows 10 Customization

    Unable to disable Microsoft Compatibility Appraiser in Task Scheduler: Hi,

    I disabled Microsoft Compatibility Appraiser in Task Scheduler but the task keeps being re-enabled.

    I then looked at the trigger section and that was not disabled.

    So I looked at the One time trigger properties.

    I then clicked on the Triggers tab.

    Then I clicked on…

  10. Get Windows 10 (gwx) app: Appraiser and Reservation notification icon

    in Windows 10 Software and Apps

    Get Windows 10 (gwx) app: Appraiser and Reservation notification icon: .
    SlartyNote2: I tried getting to the dropbox, but the redirect in TF just kept spinning so I uploaded a revised copy with the Win8.1 KB check corrected.: Download fixGwx_full.zip here
    The zip folder is a different name, but the batch file inside is still named…

Источник

Instructions

 

To Fix (C:\Windows\AppCompat\Appraiser\Telemetry
*) error you need to
follow the steps below:

Step 1:

  
Download
(C:\Windows\AppCompat\Appraiser\Telemetry
*) Repair Tool
   

Step 2:

  
Click the «Scan» button
   

Step 3:

  
Click ‘Fix All‘ and you’re done!
 

Compatibility:
Windows 10, 8.1, 8, 7, Vista, XP

Download Size: 6MB
Requirements: 300 MHz Processor, 256 MB Ram, 22 MB HDD

C:\Windows\AppCompat\Appraiser\Telemetry
* is commonly caused by incorrectly configured system settings or irregular entries in the Windows registry. This error can be fixed with special software that repairs the registry and tunes up system settings to restore stability

If you have C:\Windows\AppCompat\Appraiser\Telemetry
* then we strongly recommend that you

Download (C:\Windows\AppCompat\Appraiser\Telemetry
*) Repair Tool.

This article contains information that shows you how to fix
C:\Windows\AppCompat\Appraiser\Telemetry
*
both
(manually) and (automatically) , In addition, this article will help you troubleshoot some common error messages related to C:\Windows\AppCompat\Appraiser\Telemetry
* that you may receive.

Note:
This article was updated on 2025-05-07 and previously published under WIKI_Q210794

Contents

  •   1. Meaning of C:\Windows\AppCompat\Appraiser\Telemetry
    *?
  •   2. Causes of C:\Windows\AppCompat\Appraiser\Telemetry
    *?
  •   3. More info on C:\Windows\AppCompat\Appraiser\Telemetry
    *

Meaning of C:\Windows\AppCompat\Appraiser\Telemetry
*?

Seeing an error when you work on your computer is not an instant cause of panic. It is not unusual for a computer to encounter problems but it is also not a reason to let it be and not to investigate on the errors. Windows errors are issues that can be fixed through solutions depending on what may have caused them in the first place. Some may only need a quick fix of re-installation of the system while others may require in-depth technical assistance. It is crucial to react to the signals on your screen and investigate the problem before trying to fix it.

If you want to download and use apps for your computer, you can visit the Windows Store, Microsoft’s official marketplace. There are a number of apps to choose from and download anytime. But, chances are, there are app errors that you will encounter while using or installing the apps. Some apps will fail to install while others will not run or create any update. Other apps will simply crash. Still, there are also fixes to resolve the issues. You can clear your cache, run a troubleshooter or reset the apps. The idea is not to panic when you encounter an app error. An easy fix will often help.

Causes of C:\Windows\AppCompat\Appraiser\Telemetry
*?

Whenever you see windows error on your screen, the easiest and safest way to fix it is to reboot your computer. Just like our bodies needing a shut eye for several minutes, our computers also need to shut down once in awhile. A quick reboot can refresh your programs and gives your computer a clean slate to start a new venture. More often than not, it also eliminates the errors you have encountered after rebooting. It is also ideal to shut down your computer once a week to completely put all unused programs to rest. However, when a reboot does not work anymore, use more advanced Windows solutions to fix your errors.

Downloading new and updated apps in the Windows Store can be fun until you encountered an app error. Fortunately, there are several ways on how to fix these errors. A simple way is to check your time and date settings. Oftentimes, updates do not work because your time and date is incorrect.

If it still does not work, try these other fixes:

  • Reset your Windows Store Cache using the command WSRESET
  • Erase Temporary Files
  • Make use of the Windows Store Apps Troubleshooter to scan and detect problems
  • Clear your Store Cache
  • Reset your Windows Update Components
  • Edit the Registry for Connection Errors
  • Re-register the Windows Store

More info on
C:\Windows\AppCompat\Appraiser\Telemetry
*

RECOMMENDED: Click here to fix Windows errors and optimize system performance

What is the following folder
C:\Windows\AppCompat\Appraiser\Telemetry
*
*I am concerned about this ‘telemetry’. Do I need this about? I work entirely on the desktop this?

In my windows 8.1 laptop I find and don’t use the metro app side.

How to implement Windows Telemetry to collect telemetry data into local database

Please let us know the steps which where I want to collect all the windows telemetry data into our local database. Hi All,

Like Office telemetry, I want to implement Windows Telemetry in my organization need to be performed to implement this. Many Thanks,

Chandan

Windows 10 Compatibility Appraiser will not start manually

I need to have a current dated report showing the compatibility now fully 100% compatible and the report does not list the Acronis software as incompatible. Is there a way to manually start the Windows as a problem and the report was still dated 5/26/2016. I have the windows (flag /) icon in my and verified the new version works and makes backups. Text of report is the same; Acronis software still flagged way to make an update to the Windows 10 Compatibility Appraiser.

But maybe you I am posting in the correct forum. I have been unable to find a of the Acronis software status, so I can make changes or remove. I looked at the Task Scheduler and as far as I could tell assignment requirement or because your boss told you that’s what he wants? I sent the first command and waited about an hour and a half a different winfows7 forum or the windows10 forum.

and then checked for an updated report in the Windows 10 Compatibility Appraiser. I’d ignore it and worry about Acronis later if Downloaded and installed KB3035583. Let me know if I should post in task tray and successfully ran the Windows 10 Compatibility Appraiser. The software program is an ? some other application if necessary.

A report was generated on 5/26/2016 saying my PC (a desktop) was not generating an updated report. It may be running, but older? copy of Acronis Home backup. Or do you need it for some other reason—like a class I want to re-run the Windows 10 Compatibility Appraiser to verif…

Windows 10 Compatibility Appraiser will not start manually

I updated the Acronis program to a new version, I doing wrong? Since your hardware does not seem to
Downloaded and installed KB3035583. I have the windows (flag /) icon in my report before I do the upgrade.

as a problem and the report was still dated 5/26/2016. THE PROBLEM: It has now been over 4 hours and a am posting in the correct forum. I would like a “clean” compatibility What am

I need to have a current dated report showing the compatibility status, was compatible and there was one software program that needed to be removed. What I have done: and verified the new version works and makes backups.

Hello,
I hope I 10 Compatibility Appraiser and generate a current dated report? Is there a way to manually start the Windows check of the Windows 10 Compatibility Appraiser report shows no change.

ready for Windows 10 by seeing thier lists.

You can also manually check if your OEM computer is so if there incompatibilities I can make changes or remove the offending hardware/software. A last report was generated on 5/26/2016 saying my PC (a desktop) older” copy of Acronis Home backup. Text of report is the same; Acronis software still flagged task tray and successfully ran the Windows 10 Compatibility Appraiser.

The software program is an “ be the issue, your upgrade should go smoothly. I have added some other programs since the 5/26/2016 report date.

Get Windows 10 (gwx) app: Appraiser and Reservation notification icon

NUL

if %errorlevel%==0 (

echo Update KB%upcheck% is installed! Follow the screen instruction until for Windows Update in Windows 7. See the frequently asked questions DM forums) confirmed that these ‘errors’ were not important (niemiro was consulted). You can just echo.

Also note that you need to not installed and and then press any key it will take you back to main menu. 2015

It’s easy to find, it’s the 1st reply

But wait … It checked for 3035583 twice and did not check missupdate=1

)

echo.

Echo Windows to set upcheck=2976978, save the file and then run it as per the instructions. your confirmation, you may have to wait 5-10 minutes for it to arrive. Set Features if you have it off. Susan Bradley (a friend of Designer Media forums) wrote:

There is a community about KB 3035583 being checked twice instead of KB 2976978 for Win8.1.

.

Go do Windows Updates a few times. Set /a missupdate=%missupdate%+1>NUL

)

See Notes at the end of this post if you’re not upcheck=2976978

echo Checking for update KB%upcheck%… Maybe it will take the next

An intrepid team of MS community members worked upgrade to Windows 10″ in the subject line. Set upcheck=3035583

echo Checking more. There’s updated the registry is what fixed it for me instantly.

The update failed on the first install, I Update, follow these steps:
Click Start, and then type Update in the search box. contains some new Apprariser and…

LCD_PAD / APPRAISER FILE INVENTORY

I also noticed an appraiser file inventory on my recent files

Also the inflight was turned on while I was sleeping. Could it be possible someone has control using API. sharing turned off aswel.

Hi,
can someone help My computer has the me out here please.

Windows 7 and Telemetry

a way to disable it?

 Thanx.

If it is true, is there Is there any truth to this or is it just a conspiracy theory?

Telemetry for Windows 7…

I’ve seen Cliff’s posting in Windows 8 forum, about how to avoid telemetry in Windows. Some people, including myself, using the telemetry «feature» among other Not!!! After checking my Windows 8.1, there were three of just awesome… Little did we know that Microsoft had retrofitted 10 upgrade updates in Windows 7 and 8

A quick check on Windows 7 showed six the patches for telemetry/upgrade preparation installed from the list. That’s Windows 7, and 8.x with the telemetry «feature». the OS, that would explain why there are «only» three of the telemetry patches. Well know for some time
How to remove Windows things in Windows 10 for not updating their previous Windows versions.

My guess is that Windows 8.1 has some of the telemetry already incorporated in of the patches installed, all marked as «important».

Windows Updates and Telemetry

Some of them, I have seen red-flagged on another about Windows Updates and Telemetry. list of Windows Updates to uninstall/not install?

Hello, I have a question seeing flagged before, are:

KB2976978
KB3044374
KB3050267
KB3058168
KB3064683
KB3065988
KB3072318
KB3083711
KB3083325
KB3112343

  Other updates, that I don’t recall

My question is, should I trust the website, which people here told me was a reliable website.

Disable Windows 10 Telemetry?

What’s the most through and safest way to disable Windows 10 telemetry?

What kind of telemetry is in Windows 7 Pro?

If it’s Basic, then maybe I can live with that, and in Windows 7 — is it Basic, Enhanced, or Full?

I’ve read that various updates to Windows 7 enable telemetry. According to this Microsoft page, there are 3 options not bother trying to uninstall a bunch of updates.

I’d like to know what for telemetry in Windows 10: Basic, Enhanced, and Full.

Does anyone know what level of telemetry is enabled level of telemetry this is.

Windows 10 Pro Telemetry — Disable

I consult on a wide range of projects, and as such, However these programs also have the means to may prompt for this anyway, I can’t recall)
c. Is there any way whatsoever to set my computer come across a feature or setting that no longer works. Thanks

Hi, two free programs have been designed aimed at changing settings check everything’s ok for a while, then continue.

Security settings and crash reports change things back to default, so are relatively safe. Set a restore point before using them (they off by default in Win 10)
b. I would suggest
a. I am in charge of a large amount of confidential information.

Don’t change all settings at once; change some, from Win7-Win10 to not send any information out to Microsoft. Note much has been written about the significance of non-personal reporting to MS, as you will be aware.

When in Settings, Privacy, General)

Sometimes this also means you to minimise reporting:
O&O shutup
Spybot Anti-beacon

These only change settings you can change manually. Turn system restore on (it’s should be at my choice.

Note one side-effect of changing some of the privacy settings is you may find a red message
‘Some settings are managed by your organisation’
which is confusing and some find disconcerting.
(E.g.

disable telemetry in windows 10

how do I disable telemetry in windows 10

How much telemetry is collected by windows 8.1? something odd I noticed

I am pretty sure that the customer experience improvement program is disabled on this CEIP is turned off so is this stuff just staying on my The «source» for ALL these events is «Application-Experience», their dates because some of the entires correlate to times when programs were running fine)?

being collected or is it being sent to microsoft? Is this data only data about crashes(No, it can’t be only about crashes Is this data only about crashes and settings under and times go right back to when the computer was new. which the programs were running (it could be this)?

machine, so is this information just being archived but not sent on to ms? What is this log about, is this just data system?) is going on anyway despite me not having those KB updates?

Remove Windows Telemetry Center

Removal instructions for Windows Telemetry Center virus​This is your machine, please start a new thread in our Malware Removal Assistance forum.

  If this occurs, instead of pressing and holding the «F8 key», tap STEP 1 : Start your computer in Safe Mode with Networking

Remove all Note: With some computers, if you press and hold a key process will start again , preventing you from properly performing the next step.

ignore any alerts that this malicious software might generate. install HitmanPro on your system. STEP 3: Remove Windows Telemetry Center malicious files with Malwarebytes the program looks for various malware programs and tries to terminate them. When Rkill has completed its in order to continue with the setup process.

In this scenario, always confirm the reboot If you are still experiencing problems while trying to remove Windows Telemetry Center from Anti-Malware FREE

Download the latest official version of Malwarebytes Anti-Malware FREE. HitmanPro will start scanning malware processes associated with Windows Telemetry Center. Malwarebytes Anti-Malware will now start and you’ll be prompted to start a trial installing, make sure you leave both the Update Malwarebytes’ Anti-Malware and Launch Malwarebytes’ Anti-Malware checked.

If Malwarebytes’ prompts you to as the computer is booting you will get a stuck key message. On the Advanced Boot Options screen, use the arrow keys that you need to…

Need some help to understand Windows Defender telemetry.

I decided to use Windows Defender far as it does not reduce the effectiveness of its protections. I understand that Disabling SS will lower the protection but I read that SS send a lot of things and it is of a privacy concern for many. With the upcoming W10 fall upgrade WD will (WD) and SmartScreen (SS) as AV. I suspect history and surfing habit of the user?

I’ll much appreciate any thought, suggestion and insight how series and the like the user watch or download? I would like to tweak its settings to avoid telemetry as more telemetry too.

This topic it may have been discussed somewhere to find a balance between security and privacy.

Do I need be greatly enhanced with a number of new features.

Does SS have access to the browsing in tenforums, if so please redirect me. Does it send details of apps, files, TV to send cloud telemetry?

Is this a good tip to remove one kind of telemetry from Windows 7?

Press WIN+R keys together to launch RUN dialog one kind of telemetry from Windows 7. Again go to following key:

HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\WMI\Autologger\AutoLogger-Diagtrack-Listener\{DD17FA14-CDA6-7191-9B61-37A28F7A10DA}

of Start DWORD to 0 to turn off the auto logger program.

3. See related post: Updates without box, type regedit in RUN and press Enter. Its value would be rollups

Doesn’t break anything for me.

Restart your computer task using following steps:

1. Double-click on the DWORD and change its value shared some useful information with us. It’s from AskVG.com:

Quote:

Our reader «Xircal» sending telemetry data to Microsoft)? Now go to following key:

HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\WMI\AutoLogger\AutoLogger-Diagtrack-Listener

In right-side pane, change the value data, are there any downsides to following this tip?

You can disable this Compatibility Appraiser Editor.

2. Does it break anything (except from a 1 to 0 to disable the task.

I read about this tip to remove set to 1 by default. Besides not contributing to Microsoft’s massive volume of collected

to take effect. It’ll open Registry In right-side pane, look for the DWORD Enabled.

How to Uninstall Telemetry/Spyware Windows Updates?

am asking about:

https://gist.github.com/xvitaly/eafa75ed2cb79b3bd4e9
https://www.hackread.com/microsoft-updates-spy-on-windows7-8-users/
https://freedomhacker.net/latest-windows-7-8-81-update-spy-windows-10-4568/

  I know how to uninstall using command prompt and «wusa», and don’t

Hi, I have a question about the telemetry (spying and personal data theft) Windows updates. These are the 3 sources I bunch of these and want to uninstall them.

I have read that Microsoft created a plan to use any third-party batch scripts, I will do it all manually. I found 3 websites that list a bunch of updates.

Shut down Windows 10 telemetry with Win10 Spy Disabler

Oh, and a host of new and extended brought us Cortana. Edge. Win10 Spy Disabler is a free application available for to turn these technologies off again, and Win10 Spy Disabler is the latest example. Launch the program and it displays a

ways for Microsoft to capture data on your activities. Still, Win10 Spy Disabler does a good job of keeping you safe, Shut down Windows 10 telemetry with Win10 Spy or run the 32-bit if you?re unsure.

Fortunately 2015 has also seen the growth of a whole new market for programs — despite the name — Windows 7 and later. A brand by offering to create a system restore point before applying any tweaks. It?s all very straightforward and easy to use, and if you just want to disable new Start Menu.

Windows 10 list of 20+ «privacy tweaks» you can apply.

The program is a sub-2MB download which unzips 32 and 64-bit executables. Disabler

Little test on my Windows 7, It seems interesting. But if you need finer control over individual settings then groups of technologies in a click or two then the program should work very well.

Just double-click the appropriate version for you, we?d still opt for something more capable, like O&O ShutUp10.

How to disable Telemetry and Data Collection in Windows 10

Read the full story at Winaero
How to disable Telemetry and Data Collection Enterprise to disable Telemetry and Data Collection in Windows 10. Only Enterprise users Here is a solution for editions other than can turn it off. My main OS the insider program, from what I can see..

Unfortunately, Microsoft has provided no way to disable it completely in Windows 10

Myself I went back to 8.1 which I only use rarely. You cant modify this if you are in is 7 Ultimate. using the Settings app for Home and Pro editions of Windows 10.

Can Telemetry be Disabled Completely on Windows 10 Education?

The only differences I can find are the watermark on wasn’t able to get a definitive answer. The gpedit entry does state the following: «Setting a value the desktop and Education not being able to use LTSB. Anyway, I’ve read in a few places that Telemetry can be completely disabled on Windows 10 Education.

I am able to set it to 0 via gpedit of 0 is applicable to enterprise and server devices only. I’ve posted this question on Reddit and but I’m not sure if it’s disabled completely or not.

Источник

Приветствую друзья!

Сегодня будем разбираться с папкой AppCompat — моя задача выяснить для чего она, возможно ее вообще можно удалить? Обо всем разберемся))

AppCompat — что это такое?

В папке могут хранится данные телеметрии (которая выполняется вроде как через планировщик). Также может иметь отношение к совместимости операционки и приложений.

AppCompat расположена здесь:

C:\Windows\

Картинка с сайта: virtmachine.ru

Внутри как видите есть еще папки, например в appraiser и правда что-то есть связанное с телеметрией:

Картинка с сайта: virtmachine.ru

Вот например здесь хранятся какие-то логи:

appcompat\Programs\Install

Картинка с сайта: virtmachine.ru

На одном сайте написано что в папке AppCompat хранятся данные совместимости операционки с приложениями.

AppCompat — попытка удалить

Учитывая, что информации о папке нет никакой, именно абсолютно, тогда я принимаю решение — провести эксперимент и отключить папку принудительно. Посмотрим что из этого выйдет!

Итак, что я сделаю:

  1. У меня установлена бесплатная утилита Unlocker, она нужна чтобы удалить или переименовать заблокированные папки. Например системные, которой и является AppCompat.
  2. Мне нужно переименовать, но так, чтобы осталось оригинальное название. В таких случаях я просто добавляю символ нижнего пробела.
  3. Далее делаем перезагрузку.
  4. Проверяем работу ПК — все ли программы работают стабильно, а также нет ли ошибок.

Я перешел в папку:

C:\Windows

Нажал правой кнопкой по AppCompat, выбрал пункт Unlocker:

Картинка с сайта: virtmachine.ru

Появилось маленькое окошко, там в менюшке слева нужно выбрать пункт Переименовать:

Картинка с сайта: virtmachine.ru

Потом указать новое имя — добавляю просто символ нижнего пробела (по факту и так получается новое название):

Картинка с сайта: virtmachine.ru

Нажимаю ОК. Потом снова ОК. Как и следовало ожидать — переименовать нельзя, потому что папка какой-то прогой используется, поэтому переименование будет после перезагрузки:

Картинка с сайта: virtmachine.ru

Ну а теперь как раз пора сделать перезагрузку))

Итак, после перезагрузки я вижу что и правда все переименовалось:

Картинка с сайта: virtmachine.ru

Дальше я запустил Хром, Мозиллу.. Оперу, Яндекс Браузер — все работает, поиск Windows тоже работает. В принципе никаких ошибок нет, поэтому можно сделать вывод, что переименовывать — вроде можно. А значит можно и удалить, но советую не делать этого сразу, мало ли))

Можно сделать вывод, что способ рабочий — AppCompat можно переименовать, а значит даже удалить. Поэтому: очень важно перед всеми этими делами сделать контрольную точку восстановления:

  1. Зажмите Win + R, напишите команду control или control panel, нажмите ОК.
  2. Появится окно со значками. Проверьте что в правом верхнем углу в меню Просмотр установлено Крупные значки.
  3. Теперь найдите значок Система, запустите > выберите Защита системы.
  4. Выберите системный диск (Система) и нажмите кнопку Создать. Если кнопка неактивна — нажмите сначала Настроить и включите защиту системы.
  5. Точку восстановления советую назвать До переименования AppCompat (или до удаления). После создания точки — можно переименовывать папку или даже удалить)) Разумеется все эти дела нужно делать утилитой Unlocker.

Важное замечание: я не пользуюсь точками восстановления, но пробовал, лично у меня они почему-то со временем удаляются. Самостоятельно. Причины неизвестны. Возможно сейчас уже разработчики исправили. Но удаляются не сразу, а где-то через пару дней.

Заключение

Итак, какие выводы можно сделать:

  1. AppCompat — системная папка, точное предназначение неизвестно, но может хранить данные телеметрии, а также данные совместимости операционки и приложений.
  2. Лично пробовал переименовать, хотя это тоже самое что и удалить в нашей ситуации. Проблем либо ошибок мной замечено не было. Можете попробовать и вы, только сперва создав точку восстановления.

Надеюсь информация пригодилась. Удачи и добра, до новых встреч господа!

На главную!

17.02.2020

Источник

Last Updated: 11/26/2024
[Time Needed for Reading: ~4-6 minutes]

Windows Initialization files, such as Appraiser_Data.ini, are considered a type of Settings (Windows Initialization) file. They are associated with the INI file extension, developed by Micro Research II for 3D-Album 3.32.

Appraiser_Data.ini was first released for Windows 10 Operating System on 07/29/2015 with Windows 10.

The newest file release date for 3D-Album 3.32 was 12/10/2010 [version 3.32].

Please continue reading to find your correct Appraiser_Data.ini file version download (free), detailed file information, and INI file troubleshooting instructions.

What are Appraiser_Data.ini Error Messages?

General Appraiser_Data.ini Runtime Errors

Appraiser_Data.ini file errors often occur during the startup phase of 3D-Album, but can also occur while the program is running.

These types INI errors are also known as “runtime errors” because they occur while 3D-Album is running. Here are some of the most common Appraiser_Data.ini runtime errors:

  • Appraiser_Data.ini could not be found.
  • Appraiser_Data.ini error.
  • Appraiser_Data.ini failed to load.
  • Error loading Appraiser_Data.ini.
  • Failed to register Appraiser_Data.ini / Cannot register Appraiser_Data.ini.
  • Runtime Error — Appraiser_Data.ini.
  • The file Appraiser_Data.ini is missing or corrupt.

Microsoft Visual C++ Runtime Library

Runtime Error!

Program: C:\Windows\appcompat\appraiser\AltData\Appraiser_Data.ini

This application has requested the Runtime to terminate it in an unusual way.
Please contact the application’s support team for more information.

Most INI errors are due to missing or corrupt files. Your Appraiser_Data.ini file could be missing due to accidental deletion, uninstalled as a shared file of another program (shared with 3D-Album), or deleted by a malware infection. Furthermore, Appraiser_Data.ini file corruption could be caused from a power outage when loading 3D-Album, system crash while loading or saving Appraiser_Data.ini, bad sectors on your storage media (usually your primary hard drive), or malware infection. Thus, it’s critical to make sure your anti-virus is kept up-to-date and scanning regularly.

How to Fix Appraiser_Data.ini Errors in 3 Steps (Time to complete: ~5-15 minutes)

If you’re encountering one of the error messages above, follow these troubleshooting steps to resolve your Appraiser_Data.ini issue. These troubleshooting steps are listed in the recommended order of execution.

Step 1: Restore your PC back to the latest restore point, «snapshot», or backup image before error occurred.

To begin System Restore (Windows XP, Vista, 7, 8, and 10):

  1. Hit the Windows Start button
  2. When you see the search box, type «System Restore» and press «ENTER«.
  3. In the search results, find and click System Restore.
  4. Please enter the administrator password (if applicable / prompted).
  5. Follow the steps in the System Restore Wizard to choose a relevant restore point.
  6. Restore your computer to that backup image.

If the Step 1 fails to resolve the Appraiser_Data.ini error, please proceed to the Step 2 below.

Картинка с сайта: www.exefiles.com

Step 2: If recently installed 3D-Album (or related software), uninstall then try reinstalling 3D-Album software.

You can uninstall 3D-Album software by following these instructions (Windows XP, Vista, 7, 8, and 10):

  1. Hit the Windows Start button
  2. In the search box, type «Uninstall» and press «ENTER«.
  3. In the search results, find and click «Add or Remove Programs«
  4. Find the entry for 3D-Album 3.32 and click «Uninstall«
  5. Follow the prompts for uninstallation.

After the software has been fully uninstalled, restart your PC and reinstall 3D-Album software.

If this Step 2 fails as well, please proceed to the Step 3 below.

3D-Album 3.32

Micro Research II

Step 3: Perform a Windows Update.

When the first two steps haven’t solved your issue, it might be a good idea to run Windows Update. Many Appraiser_Data.ini error messages that are encountered can be contributed to an outdated Windows Operating System. To run Windows Update, please follow these easy steps:

  1. Hit the Windows Start button
  2. In the search box, type «Update» and press «ENTER«.
  3. In the Windows Update dialog box, click «Check for Updates» (or similar button depending on your Windows version)
  4. If updates are available for download, click «Install Updates«.
  5. After the update is completed, restart your PC.

If Windows Update failed to resolve the Appraiser_Data.ini error message, please proceed to next step. Please note that this final step is recommended for advanced PC users only.

Картинка с сайта: www.exefiles.com

If Those Steps Fail: Download and Replace Your Appraiser_Data.ini File (Caution: Advanced)

If none of the previous three troubleshooting steps have resolved your issue, you can try a more aggressive approach (Note: Not recommended for amateur PC users) by downloading and replacing your appropriate Appraiser_Data.ini file version. We maintain a comprehensive database of 100% malware-free Appraiser_Data.ini files for every applicable version of 3D-Album. Please follow the steps below to download and properly replace you file:

  1. Locate your Windows operating system version in the list of below «Download Appraiser_Data.ini Files».
  2. Click the appropriate «Download Now» button and download your Windows file version.
  3. Copy this file to the appropriate 3D-Album folder location:

    Windows 10: C:\$WINDOWS.~BT\Sources\Panther\
    Windows 10: C:\$WINDOWS.~BT\Sources\Panther\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\

    Show 196 more directories +

    Windows 10: C:\$WINDOWS.~BT\Sources\Panther\
    Windows 10: C:\$WINDOWS.~BT\Sources\Panther\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\$WINDOWS.~BT\Sources\Panther\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\$WINDOWS.~BT\Sources\Panther\
    Windows 10: C:\$WINDOWS.~BT\Sources\Panther\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\$WINDOWS.~BT\Sources\Panther\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\$WINDOWS.~BT\Sources\Panther\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\$WINDOWS.~BT\Sources\Panther\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\$WINDOWS.~BT\Sources\Panther\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\$WINDOWS.~BT\Sources\Panther\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\$WINDOWS.~BT\Sources\Panther\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\$WINDOWS.~BT\Sources\Panther\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\$WINDOWS.~BT\Sources\Panther\
    Windows 10: C:\Windows\Panther\NewOs\Panther\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\$WINDOWS.~BT\Sources\Panther\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\$WINDOWS.~BT\Sources\Panther\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\$WINDOWS.~BT\Sources\Panther\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\$WINDOWS.~BT\Sources\Panther\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\$WINDOWS.~BT\Sources\Panther\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\$WINDOWS.~BT\Sources\Panther\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\$WINDOWS.~BT\Sources\Panther\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\
    Windows 10: C:\Windows\appcompat\appraiser\AltData\

  4. Restart your computer.

If this final step has failed and you’re still encountering the error, you’re only remaining option is to do a clean installation of Windows 10.

GEEK TIP : We must emphasize that reinstalling Windows will be a very time-consuming and advanced task to resolve Appraiser_Data.ini problems. To avoid data loss, you must be sure that you have backed-up all of your important documents, pictures, software installers, and other personal data before beginning the process. If you are not currently backing up your data, you need to do so immediately.

Download Appraiser_Data.ini Files (Malware-Tested 100% Clean)

CAUTION : We strongly advise against downloading and copying Appraiser_Data.ini to your appropriate Windows system directory. Micro Research II typically does not release 3D-Album INI files for download because they are bundled together inside of a software installer. The installer’s task is to ensure that all correct verifications have been made before installing and placing Appraiser_Data.ini and all other INI files for 3D-Album. An incorrectly installed INI file may create system instability and could cause your program or operating system to stop functioning altogether. Proceed with caution.

Other Files Related to Appraiser_Data.ini

File Name Description Software Program (Version) File Size (bytes) File Location
api-ms-win-core-heap-l… ApiSet Stub DLL Microsoft® Windows® Operating System (10.0.17134.12) 11112 C:\Users\Tester\AppData\Local\Microsoft\OneDriv…
api-ms-win-core-synch-… ApiSet Stub DLL Microsoft® Windows® Operating System (10.0.17134.12) 13160 C:\Users\Tester\AppData\Local\Microsoft\OneDriv…
SCHEMA.DAT Game Data 3D-Album 3.32 12582912 C:\Windows\System32\SMI\Store\Machine\
api-ms-win-core-rtlsup… ApiSet Stub DLL Microsoft® Windows® Operating System (10.0.17134.12) 10600 C:\Users\Tester\AppData\Local\Microsoft\OneDriv…
dpnathlp.dll Microsoft DirectPlay NAT Helper UPnP Microsoft® Windows® Operating System (10.0.16299.15) 61440 C:\Windows\SysWOW64\

You are downloading trial software. The purchase of a one-year software subscription at the price of $29.97 USD is required to unlock all software features. Subscription auto-renews at the end of the term (Learn more). By clicking the «Start Download» button above and installing «Software», I acknowledge I have read and agree to the Solvusoft End User License Agreement and Privacy Policy.

Источник

Понравилась статья? Поделить с друзьями:
0 0 голоса
Рейтинг статьи
Подписаться
Уведомить о
guest

0 комментариев
Старые
Новые Популярные
Межтекстовые Отзывы
Посмотреть все комментарии
  • Как убрать диск зарезервировано системой windows 11
  • Efi windows boot manager что это
  • Setup openvpn server windows
  • Star wars battlefront 2 2005 не запускается на windows 10
  • Windows 11 installation assistant download