09.03.2021, 10:16. Показов 7387. Ответов 4
Всем доброго времени суток!
Проблема на данный момент такая: после запуска Steam до появления его окна выбивает синий экран смерти (BSOD) с ошибкой в файле atikmdag.sys.
Пробовал обновлять драйвера — ошибка пропадает, однако в игры после этого играть невозможно, ибо больше 1-5 fps не выдаёт.
Пробовал удалять драйвера видеокарты через DisplayDriverUninstaller, и устанавливать по новой — безрезультатно.
На данный момент есть две конфигурации — новые драйвера, которые подтаскивает Windows, они же самые новые от производителя, с которыми пропадает ошибка и fps не поднимается выше 5, либо старые драйвера, аж от 2015 года, с которыми игры работают отлично, но при запуске Steam выдаёт BSOD.
Конфигурация системы:
AMD A8-5550M with Radeon HD 8550G — четырёхядерный процессор со встроенной графикой.
AMD Radeon R5 M230 — дискретная видеокарта.
8 Gb RAM
Windows 10 Home с последними обновлениями.
Одной из главных мыслей было, что видеокарте уже конец, однако я установил Ubuntu 20.04 второй ОС, и там всё работает без нареканий, прямо из коробки. Скорее всего проблема всё же программная, однако моей головы на её решения уже не хватает.
What is atikmdag.sys? What causes atikmdag.sys BSoD? How can you fix the atikmdag.sys blue screen in Windows 10/8/7? After reading this post written by MiniTool Solution, you will know the answers to these questions. If you are bothered by the blue screen of death, try to fix it now!
Windows blue screen of death (BSoD) is a nightmare for many Windows users and nobody wants to experience it. However, it is not ineluctable and always appears unexpectedly, preventing the system from booting. Also, it is known as a stop error. Among many blue screen errors, atikmdag.sys BSoD is a common issue that especially occurs in Windows 11/10/8/7.
What Is Atikmdag.sys Blue Screen?
When reading here, you may ask what atikmdag.sys is. Atikmdag.sys is a system driver file that allows hardware components like a graphics card to communicate with software. Atikmdag stands for ATI Radeon Kernel Mode Driver Package. This file is pretty essential. Once it is damaged, the atikmdag.sys error happens.
In Windows 7, atikmdag.sys blue screen usually happens on startup or while using an application. Windows crashes suddenly, saying “A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: atikmdag.sys”.
If you upgrade Windows 7 or Windows 8 to Windows 10, the BSoD error stops Windows from booting and you may receive the error message “Your PC ran into a problem and needs to restart”. Usually, an error code is next to atikmdag.sys, for PAGE_FAULT_IN_NONPAGED_AREA, VIDEO_TDR_FAILURE, SYSTEM_THREAD_EXCEPTION_NOT_HANDLED, DRIVER_IRQL_NOT_LESS_OR_EQUAl, etc.
Well then, how can you fix atikmdag.sys blue screen of death? Multiple methods are offered to you and you should try them one by one to resolve the issue.
How to Fix Atikmdag.sys BSoD Windows 10/8/7/11
Usually, when the atikmdag.sys error happens, Windows can still boot to the desktop. The following operations are based on this situation. If you cannot boot the system normally, you may need to go to WinRE (Windows Recovery Environment) or safe mode to perform some fixes.
Note: The following fixes except fix 5 can be applied to safe mode. If the blue screen lets your Windows fail to enter the desktop, you should go to safe mode with networking and perform these fixes.
Fix 1: Perform a Full System Scan for Malware
The viruses and malware infection may corrupt the atikmdag.sys file, causing the blue screen error. Thus, we strongly recommend you to conduct a full system scan to remove possible virus corruption.
To do this work in Windows 10/11, you can use the snap-in antivirus program, Windows Defender.
- Go to Settings > Update & Security.
- Click Windows Defender and open Windows Defender security center.
- Click Virus & threat protection, go to Advanced scan, choose Full scan and click Scan now.
Tip: This article – Free Ways to Schedule a Scan in Windows Defender Antivirus is helpful for you if you want to let Windows Defender scan your system regularly.
If you are using an antivirus program in Windows 11/10/8/7, just launch it and run a full system scan on your PC. This way could be helpful to fix the atikmdag.sys issue. If it doesn’t work, try the next solution.
Fix 2: Update Windows System
Microsoft always keeps issuing Windows updates to improve system stability and reliability. If you encounter the atikmdag.sys BSoD error in Windows 11/10/8/7, you can try upgrading the system to the latest version. This could be helpful to fix your issue at times.
Here is how to update Windows 10:
- Navigate to Settings > Update & Security to the Windows Update page.
- Then Windows is checking for updates.
If some available updates are checked, Windows will download and install them automatically. Restart your PC and finish the installation.
Fix 3: Update ATI/AMD Radeon Drivers
Obsolete or corrupted ATI Radeon family device drivers could be one of the chief culprits behind the error like atikmdag.sys PAGE_FAULT_IN_NONPAGED_AREA, atikmdag.sys SYSTEM_ THREAD_EXCEPTION_NOT_HANDLED, etc.
To help you out, you should follow these steps to update your graphics driver:
- In Windows 11/10/8/7, bring up the Run window by hitting Win + R.
- Type devmgmt.msc and click OK to go to Device Manager.
- Under the Display Adapters category, right-click your graphics card and choose Update driver.
- Follow the prompts to apply the update. Then, reboot the system.
Alternatively, here is another way you can update the Radeon driver: go to the AMD website, download and install the latest video card driver for your PC’s model.
Tip: Additionally, you can choose to uninstall recent installations related to ATI or AMD Radeon drivers to eradicate the issue since the recent installation is likely the reason for the blue screen. So, click Uninstall device from the context menu to remove it. Then, get the latest driver and reinstall it on your PC.
Fix 4: Run System File Checker
The blue screen of death may be relevant to the Windows registry since the registry contains critical files that can keep the system running properly. If Windows Registry gets corrupted, you may be bothered by atikmdag.sys BSoD. So, running System File Checker can be helpful to scan the system and repair corrupted files.
1. Go to the search box, input cmd and run Command Prompt with administrative rights.
2. Use the command – sfc /scannow to scan your system.
3. This process will take some time. Wait until the verification completes 100%.
4. After the operation, you can reboot your PC.
Fix 5: Perform a System Restore
In Windows, there is an option for you to restore the PC to a time point and undo recent changes. It is System Restore.
Some unknown changes performed on your computer lately may lead to PAGE_FAULT_IN_NONPAGED_AREA, VIDEO_TDR_FAILURE, DRIVER_IRQL_NOT_LESS_OR_EQUAl (atikmdag.sys) BSoD error.
If you have a system restore point before, you can use it to fix your issue and restore critical files.
Tip: If your Windows fails to boot, you should perform a system restore in WinRE by clicking System Restore in the Advanced options page.
Follow the guide below:
- Input create a system restore point to the search box in Windows 10/8/7 and click the result to the System Properties window.
- Click the System Restore button.
- Choose a restore point that you have created and confirm the operation by clicking Finish.
- Follow the on-screen instructions to complete the restoration operation.
Tip: If you need to learn much information on a system restore point, refer to this post – What Is System Restore Point and How to Create It? Solutions Are Here!
If you don’t have a restore point, of course, this method couldn’t help you and you need to go to the next fix.
Fix 6: Check Your Hard Drive
If there is something wrong with the hard drive, the atikmdag.sys BSoD stop error may come out of the blue no matter you are using Windows 7, Windows 8 or Windows 10/11. Here, you should check for hard drive corruption to fix the problem.
Let’s go through how to do that:
- Similarly, open Command Prompt as Administrator.
- Input chkdsk C: /f and chkdsk C: /r. Press Enter after each command.
- If Windows asks you to schedule the check the next time the system restarts, input Y. Then, reboot your PC to perform the check.
Fix 7: Perform Windows Clean Install
Here is another way for the atikmdag.sys blue screen fix and it is performing a clean install of Windows 11/10/8/7. This method will clear all installed apps and some files stored on the system drive but it is effective to resolve Windows atikmgas.sys BSoD error.
Back up Files before a Clean Install
As mentioned above, data will get lost after you reinstall the Windows system, thus, we strongly recommend you to back up your important files or folders first of all. To do this job, you can use the professional Windows backup software, MiniTool ShadowMaker. Just download MiniTool ShadowMaker Trial Edition from the download button and install it on your PC.
MiniTool ShadowMaker TrialClick to Download100%Clean & Safe
Tip: If your PC is unbootable, you need to create a bootable disc or USB flash drive with Media Builder in this backup software. And then, boot the PC from the device to start a file backup. This post – How to Back up Data without Booting Windows shows you much information
If Windows can boot, now follow these steps to back up files.
1. Run MiniTool ShadowMaker.
2. In Backup, go to Source to choose files that you want to back up.
3. Go to Destination to choose a storage path for backed-up files.
4. Click Back up Now to perform the backup task at once.
Clean Install
After file backup, now perform the clean install of Windows 11/10/8/7. To do this work, you need to go to the download website, choose one Windows version to the corresponding download page and follow the on-screen instructions to create an installation disc or USB flash drive so that you can install a new copy of Windows from the media.
Fix 8: Change RAM
If all of these solutions are not working to fix the issue of atikmdag.sys BSoD Windows 7/8/10, perhaps the RAM gets damaged or corrupted. You can have a check with Windows Memory Diagnostics Tool or Memtest86. If errors are found, replace the bad RAM with a new one.
Tip: This post – How to Tell If RAM Is Bad? 8 Bad RAM Symptoms Are for You shows some signs of dead RAM, as well as how to check RAM and you may be interested in it.
Here are 8 methods to fix atikmdag.sys Windows 10/8/7/11. If you are encountering this blue screen of death stop error, just try them and you should easily fix it. Also, you can share them on Twitter to help more people who are struggling with the blue screen.
Click to Tweet
Back up Your Windows OS
After finishing the BSoD error fix, we recommend you to create a system image for your Windows operating system. Blue screen issues always appear unexpectedly, letting you not use the PC properly and making you very annoyed.
If you have a system backup, you can easily restore the computer to an earlier state without taking much time to fix the atikmdag.sys blue screen.
Note: System image recovery couldn’t fix the stop error caused by RAM issues but it can fix the issues caused by software problems. In most cases, atikmdag.sys BSoD happens due to software issues. So, backup is necessary.
How can you back up your Windows system? MiniTool ShadowMaker is still helpful. System backup and recovery, file/disk/partition backup and recovery are supported by this backup software. When getting a blue screen, boot the PC from a created bootable disc or flash drive and perform a faster recovery.
If you need to restore the image to a different computer with dissimilar hardware, Universal Restore can fix the incompatibility issue to ensure the PC boots normally.
Now, get MiniTool ShadowMaker Trial Edition (30-day free trial). To back up your PC all the time, get its Pro Edition from the store website.
MiniTool ShadowMaker TrialClick to Download100%Clean & Safe
Here is a guide on system backup:
- Run MiniTool ShadowMaker to its Backup page.
- You find system related partitions are selected by default. And you need to choose an external hard drive, USB drive, SSD, etc. to save the created system image file.
- Start the system backup by hitting Back up Now.
Bottom Line
Here is the end of this post. After reading it, you clearly know what atikmdag.sys blue screen is, how to get rid of this BSoD stop error and how to protect your PC. Now, it is time to follow these solutions if you have this blue screen and create a system backup.
When meeting some questions while using MiniTool software or if you have any suggestions, remember to let us know. Writing an email to [email protected] or leaving your idea in the Comment part is up to you.
If you’re using an AMD or ATI graphics card, and you’re seeing a VIDEO_TDR_FAILURE blue screen error, you’re not the only one. Many Windows users have reported this frustrating error. And as annoying as a blue screen of death error can be, it’s possible to fix.
We’ve put together 3 fixes you can try. You may not need to try them all; just work your way down until you find the one works for you.
3 fixes for Video_TDR_Failure
- Update display card and chipset drivers
- Re-install drivers in Safe Mode
- Replace atikmpag.sys or atikmdag.sys file
You might see atikmpag.sys instead of atikmdag.sys in the parenthesis after Video_TDR_Failure error, but these two are not much different from each other.
If you’re with NVIDIA or Intel graphics cards, the error codes would be nvlddmkm.sys and igdkmd64.sys.
What is VIDEO_TDR_FAILURE error?
TDR stands for Timeout, Detection, and Recovery components in Windows. It’s supposed to be there to help stop BSODs by resetting the GPU and/or driver when there’s an issue causinga lengthy delay. If this problem happen too many times in a row, a blue screen of death occurs.
You’ll need to be logged into Windows on the problem computer to try any of these solutions. If you can’t log into Windows, power on and off your PC 3 times to perform a hard reboot and restart it in Safe Mode, then try these solutions.
1: Update display card and chipset drivers
If your PC fails to reset the display driver and recover from a timeout, a Video_TDR_Failure blue screen will appear. You can update your chipset and display card driver to fix it. Here’s how:
Manual driver update – You can update your chipset and display card drivers manually by going to the device manufactures’ website and searching for the most recent correct drivers. Note that if the Video_ TDR_Failure error happens on your laptop, you should go to the laptop manufacturer for the display card and chipset driver. If you don’t have the time, patience or computer skills to update your drivers manually, you can always do it automatically with Driver Easy.
Automatic driver update – Driver Easy will automatically recognize your system and find the correct drivers for both your chipset and your AMD video card. You don’t need to know exactly what system your computer is running or who all the manufacturers are, you don’t need to risk downloading and installing the wrong driver, and you don’t need to worry about making a mistake when installing. You can update your drivers automatically with either the FREE or the Pro version of Driver Easy. But with the Pro version it takes just 2 clicks (and you get full support and a 30-day money back guarantee):
1) Download and install Driver Easy.
2) Run Driver Easy and click the Scan Now button. Driver Easy will then scan your computer and detect any problem drivers.
3) Click the Update button next to your flagged AMD video card (or your chipset) to automatically download the correct version of that driver, then you can install it manually(you can do this with the FREE version).
Or click Update All to automatically download and install the correct version of all the drivers that are missing or out of date on your system (this requires the Pro version – you’ll be prompted to upgrade when you click Update All).
2: Re-install drivers in Safe Mode
IMPORTANT: You need to have the latest version of Intel chipset driver and ATI/AMD graphics card driver in your computer. You can download them for free with Driver Easy first.
1) Go to Safe Mode in Windows 10.
2) Go to Device Manager. Expand Display adapters. Right-click AMD/ATI device and click Uninstall.
3) Click OK.
4) Reboot your computer into the normal mode. Then install the latest version of Intel chipset driver for your computer.
5) Reboot your computer again.
6) Try installing the latest version of the ATI/AMD device driver on your computer again.
3: Replace atikmpag.sys or atikmdag.sys file
If you’ve tried the methods above but the problem still occurring, you may need to replace the file in atikmpag.sys or atikmdag.sy (which is listed in your blue screen error).
1) Download the latest version of ATI/AMD graphics card driver first. You can do so with Driver Easy.
2) Follow the path C:\Windows\System32\drivers and locate the atikmdag.sys (or atikmpag.sys) file. Rename it as atikmdag.sys.old (or atikmpag.sys.old).
It’s important that you change only the one listed in your blue screen error.
3) Go to ATI directory (Usually in C:\ATI) and find the file atikmdag.sy_ or atikmpag.sy_.
Copy the file to your desktop.
If you can’t find it in this folder, try typing the name of the file into the search box in the Start panel.
3) On your keyboard, press the Windows logo key. Type cmd and click Command Prompt.
4) Type chdir desktop and press Enter to change the directory to your Desktop.
5) Type expand.exe atikmdag.sy_ atikmdag.sys and press Enter.
Or, type in expand -r atikmdag.sy_ atikmdag.sys and press Enter.
6) When the expansion is complete, copy the new atikmdag.sys file from your Desktop to C:\Windows\System32\Drivers.
7) Restart your computer and the problem should be resolved.
136
136 people found this helpful
Available in other languages
Ein VIDEO TDR FAILURE blauer Bildschirm Fehler ist ganz störend. Aber keine Sorge. 5 effektive Lösungen hier können Ihnen helfen.
Home » How To Fix Atikmdag.Sys BSOD In Windows 10/8/7?
For many users, Windows BSoD or the blue screen of death is a nightmare. You need to understand the fact atikmdag.sys is one of the best windows now. Nobody wants to experience this problem with their computer. But you can not resist it, and it can appear unexpectedly at any time and prevent your system from booting.
This error is also known as a stop error. There are different types of blue screen errors, and among them, the most common one is atikmdag.sys BSOD that more occurs in Windows 10/8/7. You also need to keep in mind that system thread exception is not handled atikmdag.sys is quite similar to this.
Here I will guide you to fix this issue with your computer. But before we jump into the solution, first get some idea about this error.
What Is Atikmdag Sys?
Within your computer, there is a system driver file that lets the hardware components of your computer, for example, a graphics card, communicate with the software. And the atikmdag.sys is the system driver.
The full form of atikmdag is ATI Radeon Kernel Mode Driver Package; it is also atikmdag.sys advanced micro devices, inc. Ati Radeon family. This is a really essential file. The atikmdag.sys error takes place when this file is damaged.
While using an application or on startup, atikmdag.sys blue screen error generally happens in Windows 7. An error message shows, system service exception atikmdag.sys.
In case you upgrade your Windows 7 or 8 to Windows 10, you may receive another error message, and the BSoD error prevents the Windows from booting.
So now, as you get the idea about the error, it is time to look for the fixes. There are multiple methods to fix this issue or error. You can try them one by one to check whether the error is there or not.
How To Fix Atikmdag.Sys BSOD In Windows 10/8/7?
Now, here are the fixes that you can try to fix the atikmdag.sys windows 8.1 issue that you are facing right now. You can try the atikmdag.sys windows 10 fix as well. So let’s get starting with the fixes.
1. A Full System Scan For Malware
A virus or malware infection may cause the corruption of atikmdag.sys file and this error. So, I always strongly recommend a full system scan in order to remove the possible virus corruption.
And for doing that, you can follow the below-mentioned steps:
- Go to Settings.
- Go to Update & Security.
- After clicking on Windows defender, open the windows defender security center.
- Click on Virus & threat protection.
- Now go to Advanced scan.
- Choose the option, Full scan.
- Click on Scan Now.
In case you are using an antivirus, you can simply launch it and run a full scan with that. This way, you can fix the atikmdag.sys issue. And if this technique does not work, you can try the next one.
2. Update Windows System
For improving reliability and system stability, Microsoft always continues issuing new Windows updates. So upgrading the system to the latest version can fix the issue.
Follow these steps to update Windows 10:
- Go to Settings.
- Go to Update & Security to the Windows Update page.
In case any update is available, Windows will automatically download it and update it also. Restart your system and check for the issue. If it is still there, you can try some other things.
3. Update ATI/AMD Radeon Drivers
Corrupted ATI Radeon family drivers can also be the reason behind this error. So, you need to update your graphics driver by following the below-mentioned steps:
- Press Windows+R and bring up the Run window.
- Now for going to device manager, type devmgmt.msc and click on Ok.
- Right-click your graphics card under the Display Adapters category.
- Choose Update driver.
- Follow the on-screen instructions for applying the update.
- Restart your system.
Some More Techniques
Moreover, Here are some other techniques that you can also try in order to fix the atikmdag.sys issue or error:
- Run System File Checker.
- Perform A System Restore.
- Check Your Hard Drive.
- Perform Windows Clean Install.
- Change RAM.
FAQs (Frequently Asked Questions)
Therefore, here are some FAQs that will also help you in getting better ideas and solving some other related issues:
How Do I Fix Atikmdag?
For Fixing atikmdag.sys error, you can try
- A full system scan.
- Updating the Windows system.
- Updating ATI/AMD Radeon drivers.
- Perform a system restore.
- Run a system file checker.
- Check your hard drive for any issues.
- In addition, you can perform windows clean install and lastly change RAM.
Can I Delete Atikmdag Sys?
As I have mentioned earlier that atikmdag.sys is a system driver, and it enables hardware components to communicate properly with the software. And in order to do that, no additional programming is required from the software developer. So, deleting it will not solve the issue.
How Do I Fix Netwtw04 Sys?
For fixing netwtw04 sys, you can run a full system scan, or disable your third-party antivirus temporarily, or updating the network adapter driver, or roll back network adapter driver, or for repairing your PC registry, run an SFC scan, or run the DISM commands, or run CHKDSK in file explorer, or go for the latest Windows update, or run the blue screen troubleshooter, or run a system restore.
How Do You Replace Atikmpag Sys?
For replacing the atikmpag.sys you need to follow the steps that are mentioned below:
- Hold the Windows key, and along with it, press R.
- The dialogue box will open, type C:\Windows\System32
- Search for the file name stikmpag.sys.
- Now rename it to atikmpag.sys.bak.
- Now hold the Windows key and press R again.
- In the run dialogue, just type C:\.
- Now click OK.
- Search for a folder named ATI.
- There search for the file named atikmpag.sy_.
- Copy that file to your desktop.
- And hold the Windows key and press X.
- Click on Command Prompt (Administrator).
- A black window will open.
- Type chdir desktop.
- Now press Enter.
- Type expand.exe atikmdag.sy_ atikmdag.sys.
- Press Enter.
- After the command is complete, from the desktop, Copy the newly generated atikmdag.sys and Paste it in the C:\Windows\System32.
- Restart your system.
Conclusion
So, now you know the fixes that you can try in order to eliminate the atikmdag.sys. In case you are facing system_thread_exception_not_handled atikmdag.sys or system_service_exception atikmdag.sys error, you also can try to fix that as well with these steps.
Read Also:
- Which Social Media App Has A Ghost As Its Mascot?
- What Is Pximouse? Virus Or Keylogger? Is It Dangerous
- How To Fix: Google “ChromeContinue Where You Left Off” Doesn’t Work