Arduino uno не определяется windows 10

Ардуино не определяется компьютером (и как это исправить)

Fails to connect your Uno board with Windows computer? Don’t panic. This post is going to walk you through how to fix it easily.

Usually your Uno board not recognized properly problem is due to its driver problem. You can solve it through updating your Arduino Uno driver. See how…

Pick the way you prefer:

1. Update your Arduino Uno driver manually
2. Update your Ardunio Uno driver automactically

Option 1: Update your Arduino Uno driver manually

You’ll need some computer skills and patience to update your drivers this way, because you need to find exactly the right the driver online, download it and install it step by step.

See how to do it:

The screenshots below are from Windows 10, but the steps are also valid for other Windows system.

1. Go to the official Arduino website. Then go to the Software Downloads section.
2. Click Windows Installer, for Windows XP and up.
   

   Картинка с сайта: www.drivereasy.com

3. Click Just Download. The driver .exe installation file would then be downloaded automatically.
   

   Картинка с сайта: www.drivereasy.com

4. On your keyboard, hold down the Windows logo key and then press Pause.
5. Click Device Manager.
   

   Картинка с сайта: www.drivereasy.com

6. Find and right-click your Arduino Uno software. Probably it’s listed under the Other devices section due to the problem. Then select Update driver.
7. Select Browse my computer for driver software.
   

   Картинка с сайта: www.drivereasy.com

8. Click the Browse… icon. Another window appears: go to the folder with the Arduino uno driver that you just downloaded. Select the drivers folder, then OK > Next.

If you’re prompted by the message that the board has not passed Windows Logo testing, click Continue Anyway.

If you don’t have the time, patience or computer skills to update your Arduino Uno driver manually, you can do it automatically with Driver Easy. Move onto Option 2 then.

Option 2: Update your Ardunio Uno driver automactically

Driver Easy will automatically recognize your system and find the correct drivers for it. You don’t need to know exactly what system your computer is running, you don’t need to risk downloading and installing the wrong driver, and you don’t need to worry about making a mistake when installing.

You can update your drivers automatically with either the FREE or the Pro version of Driver Easy. But with the Pro version it takes just 2 clicks:

1. Download and install Driver Easy.
2. Run Driver Easy and click the Scan Now button. Driver Easy will then scan your computer and detect any problem drivers.
   

   Картинка с сайта: www.drivereasy.com

3. Click Update All to automatically download and install the correct version of all the drivers that are missing or out of date on your system (this requires the Pro version – you’ll be prompted to upgrade when you click Update All).
   Note: You can do it for free if you like, but it’s partly manual.
   

   Картинка с сайта: www.drivereasy.com

If you have any problems while using Driver Easy, feel free to contact our support team at support@drivereasy.com. Be sure to attach the URL of this article if needed for more expedient and efficient guidance.

That’s it. Your Uno board should be connected to your Windows computer successfully now. Feel free to comment below if you have any questions.